How to disable the field-input in xd01

Hi Abappers,
I have created subscreen in xd01 using BADI: CUSTOMER_ADD_DATA_CS. After giving input to field, it has to go disable mode how is it possible.How to disable that field.
Regards,
simba.

Hi,
 after u add some data to that field. Now check the field, if it is not initial then make that field in disable mode.
for eg:
loop at screen.
 if itab-<fieldname> is not initial.
 screen-input = 0.
 modify screen.
 endif.
 endloop.
Regards,
Kasuladevi Srinivas
Edited by: Kasuladevi Srinivas on Sep 11, 2008 7:26 AM

Similar Messages

TextField: how to disable the accent input window for e,o,a keys

I have a TextField and when I keep one of the keys 'e', 'a' or 'o' pressed I see an odd new window that allows me to enter accent characters using the mouse. Since this new window is displayed at the wrong position (somewhere below my actual Stage) I'd like to disable it but haven't found something in the JavaDoc.
Here is a small screenshot since I don't know if I've used the correct words to describe it - it probably has a proper name:
http://i.imgur.com/6qJwwEh.png
I'm on a german keyboard and on Mac OSX using jdk1.7.0_15.jdk.
Edited by: jh on 08.03.2013 10:24

But what's the point? It's not as though you'd actually be able to prevent the page source from being obtained by a determined user.
Kirk

How to disable a field in a standard transaction

Good day,
Can any one tell me , with an example of , how to disable (the field should not allow any input ) a parameter or a select option in a standard transaction.

Probably the only way to achieve this is by creating transaction variants:
In the SAP Reference IMG, you can create transaction variants. Choose Basis Components ® Application Personalization ® Tailoring of Application Transactions ® Configure Transaction-Related Display Values for Fields (Transaction SHD0). Transaction variants allow you to preset values for fields in a transaction, set field attributes, or hide entire screens.
To execute a transaction variant, you define a variant transaction using the Transaction Maintenance transaction (SE93).
Once you have entered a transaction code and short description, choose transaction type Transaction with variant (Variant transaction).
To define a variant, enter the name of the transaction and the name of the variant. You can then use the new transaction code to start the special variant of the transaction.
Steps :-
Transaction SHD0 - Create a variant for the required transaction bychanging the layout through hiding fields and screens.
Transaction SE93 - Create a variant transaction (e.g. for VA02 you canname it as ZA02). Next allocate the transaction variant to this varianttransaction.

How to Change the Fields from Input mode to display mode

Hi experts,
Here is my business requirement. I need to show certain fields in the PRICING TAB OF SALES ORDER in display mode. Now for this i am using the BADI definition CRM_PRICING_BADI.
   Now, can anybody tell me how to change the field type from input mode to change mode?

Hi Karan,
In your BADI has a parameter CT_INPUT_FIELD_NAMES with one field called CHANGEABLE with values:
     Field Can Be Changed
A     Field Cannot Be Changed
   Assing this values to your fields according with your requirements.
Regards.
Manuel

How to keep the field open for input with error message in report program

Hi,
Need a help in solving the below issue.
"How to keep the field open for input with error message in report program"
Regards,
C.Shasiraj.

Hi...
you have to use the event:
AT SELECTION-SCREEN ON <FIELD> EVENT.
u have to give an error message in this event.
Consider the following Example:
PARAMETERS : NUMBER TYPE I.
AT SELECTION-SCREEN ON NUMBER.
IF NUMBER = 10.
MESSAGE 'Number vakue is 10' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
WRITE NUMBER.

in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
Execute this program once u will understand....
also Consider the following links :
Regarding events:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
Regarding messages:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
This is very useful.......
Reward points if useful....
Suresh....

How to disable a field on the basis radio button value selected.

hello to all,
i am facing one problem.I have declared two selection screen blocks.
In one i hvae declared two radio button r1 -Fiscal year and r2--Datewise.
And in another selection screen block all i/p fields. like plant. date.year etc.
Now if user select r1-Fiscal year then i/p field - date of second block should be disable.
And if user select r2-Datewise then i/p field - year of second block should be disable.
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME
          TITLE TEXT-002.
       PARAMETERS: R1 RADIOBUTTON GROUP RA1 user-command ucomm,
                   R2 RADIOBUTTON GROUP RA1 DEFAULT 'X'.
   SELECTION-SCREEN END OF BLOCK BLK.
selection-screen begin of block b1 with
frame title text-001.
parameters : gjahr like ZSA_DETAIL-gjahr MODIF ID YAR,
             aedat like ZSA_DETAIL-aedat MODIF ID DAT,
             werks like ZSA_DETAIL-werks .
selection-screen end of block b1.
AT SELECTION-SCREEN on RADIOBUTTON GROUP RA1.
   BREAK-POINT.
    IF R1 = 'X'. "fiscal
     LOOP AT SCREEN.
        IF screen-group1 = 'DAT'.
         screen-active = 0.
         screen-invisible = 1.
         MODIFY SCREEN.
         ENDIF.
        endloop.
   ELSEIF R2 = 'X'.
     LOOP AT SCREEN.
     IF screen-group1 = 'YAR'.
       screen-active = 0.
      MODIFY SCREEN.
     ENDIF.
     ENDLOOP.
    ENDIF.

Hi Shikha,
Regarding your query, when you select a particular radio-button then the fields pertaining to that radio-button should get activated or get displayed, otherwise it should be hidden.
This can be done adding the addition to the Radiobutton 'USER-COMMAND' this will automatically enable-up
the functionality of the fields related to that radiobutton, while disabling the others.
If USER-COMMAND isn't given, then ENTER key serves the purpose.
DATA:
w_carrid LIKE sflight-carrid,
w_connid LIKE sflight-connid.
PARAMETERS:
p_carrid RADIOBUTTON GROUP airl USER-COMMAND airline,
p_connid RADIOBUTTON GROUP airl.
SELECT-OPTIONS:
s_carrid FOR w_carrid,
s_connid FOR w_connid.
INITIALIZATION.
p_carrid = 'X'.
Now enabling desired fields and disabling the others, can be done by the following snippet.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_carrid EQ 'X'.
IF screen-name CS 'S_CONNID'.
screen-active = 0. " Disable the field S_CONNID
MODIFY SCREEN.
ELSEIF screen-name CS 'S_CARRID'.
screen-active = 1. " Enable the field S_CARRID
MODIFY SCREEN.
ENDIF.
ELSEIF p_connid EQ 'X'.
IF screen-name CS 'S_CARRID'.
screen-active = 0.
MODIFY SCREEN.
ELSEIF screen-name CS 'S_CONNID'.
screen-active = 1.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
Hope, this would help you solve your problem.
Thankyou,
Zahack.

How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID promts the previously used email user IDs... Want to disable this feature---How can ot be done ?

Question
How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID prompts the previously used email user IDs... Want to disable this feature---How can it be done ?

*Click the (empty) input field on the web page to open the drop down list
*Highlight an entry in the drop down list
*Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
* Tools > Options > Privacy > History: "Remember search and form history"
* https://support.mozilla.com/kb/Remembering+passwords
* https://support.mozilla.com/kb/Form+autocomplete

How to Disable the Lead selection Action on aTable n How to Refreh a Page

HI....
1)How to Disable the Lead selection Action on aTable n How to Refreh a Page r web dynpro application.
In my case i have a table n user enters data on multiple rows in table , n i have some input fields outside of table for those Inputs fields am settiing the data at the screen initilization(in Init() moethod by hard code).the problem is whenever the is clicking in th 2nd row of a table the Lead Selection is triggerig and the data in the Input Fields outside the table is not displayinig.
So by removing the lead Selection Action of a table i thought i can reslove this,
2) How to refresha page(like we click F5 on key board),is it can be done thru code in web dynpro application
Regards
Rajesh

Hi,
You did not explained what is your functionality or coding in leadselection. Is that action on leadselection is necessary for you?.
1)If you just want to remove the action then go to table properties and remove the action for leadselection.
2)If you still want to continue with your leadselect action, then what you can do is.. write the code in leadselection action to again set the input fields which are out from table. That is what you did in your init method.
Page Refreshing
3) What do you mean by page refreshing? is that refreshing your table only or both the table and input fields.
What I understood is you are allowing the user to enter values in table and soon after pressing a button the values should be saved and the data in input fields shld be deleted. For this if you only invalidate the node then the user entered data will be lost.
So what you do is after getting the input data from the user add it to a ArrayList and then invalidate the node which clears the data in input field. Finally bind the Arraylist to your node. see the following code. This is a concept make changes according to your requirement
ArrayList list1=new ArrayList();
wdContext.nodeAbc().bind(list1);
IPrivateExcelviw.IAbcElement ele = wdContext.createAbcElement();
ele.setNo(wdContext.currentAbcElement().getNo());
ele.setName(wdContext.currentAbcElement().getName());
ele.setMarks(wdContext.currentAbcElement().getMarks());
list1.add(ele);
wdContext.nodeAbc().invalidate();
wdContext.nodeAbc().bind(list1);
Revert me if you have any doubts
Regards
Raghu
Edited by: Raghunandan Madarikuruva on Oct 16, 2008 8:07 AM

Disabling the fields

Hi All,
How can i disable the fields when i press on Display button, the data shud be retrieved but the fields shud be in display mode only.
waiting for ur reply.
Thanx & Regards
Srinath

You need to loop at screen and modify the attirbutes of the screen structure. Do this in the PBO and before doing this , check if the transaction is in Display mode or Change mode.
if display_mode = 'X'. "Variable set depending on the transaction
Loop at screen
screen-input = 0.
screen-active = '0'.
modify screen.
endloop.
endif.
regards,
Advait.

How to hide the field from the view in the webdynpro application?

Hi Gurus,
I got a requirement where in which ,default layout has the field name Time.......To......... which is (2 input box ) and one lable assigned to the container.........
Now my requirement is to hide this field from the layout for all cases of leave......(all types of leave)....
I got a few inputs from forum that we can achieve this by implementing the following steps..........
Create In context => Value attribute => Say Visibility
Go to its properties
Select com.sap.ide.webdynpro.uielementdefinitions.Visibility
In View Layout
Select UI Element Set Visible property to this context variable Visibility.
In wdDoModifyView() You can set this property to false
wdContext.currentContextElement().setVisibility(false);
Can you people tell me where to create the value attribute........
In the view context or in the component context...........
and field that am talking about is assign to the container you want me to assign this context variable property to all ......Like to input box ,label and the container..........
Please calrify this ASAP...........
Thanks in Advance,
Dharani

Hi Manoj......
Hi Murutuza,
As per your guidelines I have created the value attribute in View context (which has the field..... which needs to be hide)inside the value node say FieldVisibility.......and attribute name OldTimeDuration......and I set this value with uidefeneitions Visibility .......
and I bind this vaule with the field property visible(Time.......To..........)which I need to hide...........
Now in the view implementation tab ..........I have coded in the doinit method(since my requirement to hide the field from the layout in all cases).........
wdContext.currentFieldVisibilityElement().setOldTimeDuration(WDVisibility.NONE);
But if I deploy the application and see still am getting the same field dispalying in the screen.........
I even tried putting this code in wdmodifyview method.........same results........
Kindly tell me how to hide the field permenantly from the screen............(without any conditions.)
Thanks in Advance,
Dharani

Hi gurus in ALV how to edit the fields on out put list

hi gurus in ALV how to edit the fields on out put list

hi
REPORT ZSB_ALV_EDITABLE_SAMPLE.
TABLES: SFLIGHT.
DATA: gc_container TYPE scrfname VALUE 'LIST_AREA',
gc_custom_container TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
gc_grid TYPE REF TO CL_GUI_ALV_GRID,
gs_layout TYPE LVC_S_LAYO,
gt_fieldcat TYPE LVC_T_FCAT.
DATA: ok_code TYPE SY-UCOMM.
DATA: gt_outtab TYPE TABLE OF SFLIGHT.
*DYNPRO
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '100'.
CREATE OBJECT gc_custom_container
EXPORTING
container_name = gc_container
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
CREATE OBJECT gc_grid
EXPORTING
i_parent = gc_custom_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5 .
PERFORM prepare_field_catalog CHANGING gt_fieldcat .
PERFORM prepare_layout CHANGING gs_layout .
PERFORM get_alv_display.
ENDMODULE.
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
OK_CODE = SY-UCOMM.
IF OK_CODE = 'BACK'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR OK_CODE.
ENDIF.
ENDMODULE.
FORM prepare_field_catalog CHANGING gt_fieldcat TYPE LVC_T_FCAT.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
I_STRUCTURE_NAME = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fieldcat[].
ENDFORM.
FORM prepare_layout changing p_gs_layout TYPE lvc_s_layo.
p_gs_layout-zebra = 'X'.
p_gs_layout-edit = 'X'.
ENDFORM. " prepare_layout
FORM get_alv_display .
SELECT * FROM sflight INTO TABLE gt_outtab UP TO 10 ROWS.
CALL METHOD gc_grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT'
IS_LAYOUT = gs_layout
CHANGING
it_outtab = gt_outtab
IT_FIELDCATALOG = gt_fieldcat
ENDFORM. " get_alv_display

How to disable the status icon in Skype 4 for Andr...

Dear Skypers,
How to disable the status icon in Skype 4 for Android phones?
The guide on this following support page not working anymore: https://support.skype.com/en/faq/FA12359/how-do-i-enable-or-disable-the-status-icon-in-skype-4-for-a...
Older version has the option to disable Skype Status and get rid of the Skype icon on Android status bar. But latest 4.4.0.31835 could not disable Skype Status in notifications settings. :/
Device: Google Nexus 4
Android: 4.3 JWR66Y
Skype: 4.4.0.31835
Please bring back the option to disable the Skype icon on Android status bar. This is the main reason I uninstall Skype. :/
Kudos to the team, the apps is really smooth and fluid to use. Would be nice if you guys are following the Android Design Principles and using Google Cloud Messaging for push notification to improve User Experience and battery life.
Kind regards,
/chrone
everytime i get ahead, i feel more dead.
Solved!
Go to Solution.
Attachments:
how to get rid of skype icon on android status bar.png ‏46 KB

Long click on this notification a sub menu having field "App info" would appear goto App Info. You can goto there by "Manage Apps">"Skype" also.
Uncheck Option "Show Notifications" A dialog will open. Don't worry about notifications for now just click OK. Now the notification icon skype has also been removed.
Now simply check "Show notification again". After doing this you would get notifications but skype icon would not be shown in the status bar anymore.
Issue: this is just a trick you need to repeat this every time sign out and sign in again. Mostly you don't do that so no need to worry.

How to disable the cancel button in InputDialogBox?

Can someone please tell me how to disable the cancel button in an input dialog box?
thanks,

Cross posted: [http://www.coderanch.com/t/487888/Swing-AWT-SWT-JFace/java/disable-cancel-button-input-dialog]

How to disable the inputfield using radio button dynamically in module pool

How to disable the inputfield on the screen using radio button dynamically in module pool.
Please suggest .
        Thanks.
Edited by: Lavanya YH1504 on Jul 30, 2010 1:20 PM

I got it thank you.
LOOP AT SCREEN.
    if screen-GROUP1 = 'LA1'.
       If RADIO1 = 'X'.
        SCREEN-INPUT = '0'.
        MODIFY SCREEN.
     ELSEIF RADIO2 = 'X'.
       screen-input = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
ENDMODULE.                 " STATUS_0100 OUTPUT
Edited by: Lavanya YH1504 on Jul 30, 2010 1:51 PM

How to validate the field when i am populating the data cursor to block

Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.

902434 wrote:
Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.If you want to validate at entry level then use When-Validate-Item trigger and check the input and show message. Like
If :quentity <0 then
message('do not enter negative value');
message('do not enter negative value');
raise form_trigger_failure;
end if;Why u open same thread again ? not closing one.. check this one
</a>
How to validate the field when i am populating the data cursor to block
Hopes this helps
If someone's response is helpful or correct, please mark it accordingly.

How to disable the field-input in xd01

Similar Messages

Maybe you are looking for