How to disable torch in nokia E5

I have nokia E5.. I have a habit of keeping my mobile inside pant or jeans pocket. Whenever i sit somewhere.. My mobile torch light(Camera Flash) turned on.. since ma space bar key of mobile is getting pressed for a long while.. My battery power is getting waste because of this. Give me a good solution regarding how to avoid this problem. thank you.. 

Take a look at this
http://www.youtube.com/watch?v=LWACnjDbl5E
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' 

Similar Messages

  • How to disable 3g on nokia c3-01

    Hi everyone
    Can you please let me know how to disable 3g on nokia c3-01? I only see Pack. Data conn -   when needed. I would like to disable 3g entirely and use just GSM...
    Thanks in Advance for your support
    Solved!
    Go to Solution.

    same problem in occured in my phone also and then i have also tried same solution which is mentioned in above solution and then my problem get solved.
    thnaks for help..
    Nokia C3-01

  • How do I completely disable roaming on Nokia Belle...

    Hey guys
    I found settings to prevent incoming calls from being answered (call barring) but I don't know how to disable roaming.
    I want to disable roaming and restrict my networks to WCDMA type only.
    Any help appreciated!
    Solved!
    Go to Solution.

    Hi Extnct,
    Thank you for your post and welcome to the Nokia Discussion forums.
    Have a look at the following link:
    http://europe.nokia.com/support/search?qt=data%20roaming&cat=support&fullcontent=true&cnt=1&page=1
    Let me know if this helps.
    Regards
    Raoul_Duke
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • X2 how to disable nokia store update option?

    I am using nokia x2 android phone.by the way,when i tried to open nokia store it asks me to update it.but i dont want to update my nokia store.im love to stick to factory settings and default versions of apps. How can i open my nokia store without goin for a update ? I cant open my nokia store because of this irritating request for store's update.it does not even have any skip option.what can i do now?

    there is improvement in terms of display and payment option, also some bugs are fixed, i never had any problem of updating the store or os, it is has been ok for me
    posted from my nokia x2

  • Nokia E71 - how to disable 'reminder' ?

    does anybody know how to disable that annoying beeping sound that remembers you about unreaded sms or missed calls (not blinking d-pad light but sound) ?
    Solved!
    Go to Solution.

    thanks for reply. what a shame its my bad. i noticed that i have (remind me) program instaled and i didnt know that it is still working even it is not listed in background programs.
    this threat can be closed
    Message Edited by lefti696 on 04-Sep-2008 08:59 PM

  • How to find my stolen Nokia lumia 730

    How to find my stolen Nokia lumia 730? I have disabled the Internet as well as location service. Is there any way to find the Stolen Phone? How can get to know if the device is used by other sim or other operator? i have windows phone account. I tried to search it using find my phone. But the device is currently switched off by the thief. Please help me to find out my stolen Nokia Lumia 730. I have registered a complaint in nearby police station.

    shrikanth2306,
    I do realise your situation. Sorry, as you have mentioned that the location services on your phone was turned off, you may not be able to track your phone using the "Find My Phone" service.
    You did the right thing in reporting the incidient to the proper authorities. I also advise you to contact your local telecommunications agency to request for blocking of the handset.

  • How to disable agps on E71x

    Hi,
    I just got an E71x from ATT and installed Nokia Maps on it with downloaded maps so as to not use any data over the air. I learned somewhere that agps also uses data (even tough small amounts). I was wondering if anybody knows how to disable the agps functionality on the E71x.
    Thanks

    diesel_travis wrote:
    diesel_travis wrote:
    Menu - Settings - Config. - General - ??? I can find anything about positioning.
    Oops! I meant to say "I can't find anything about positioning.
    Hi diesel_travis
    If you go to Menu > Tools > Settings > General > Personalization - now scroll down to bottom of screen and below "Factory settings" there is "Positioning" (if this option available on E71x).
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • How to disable heptic feedback vibration

    Please update me about how to disable vibration on three keys in nokia lumia 520

    You can't
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • How to disable parent window while popup window is coming

    Hi,
    I am working on Oracle Applications 11i.
    I am able to get the popup window using the Java script in the controller.
    Please see the below code for the reference.
    String pubOrderId = pageContext.getParameter("orderId");
    StringBuffer l_buffer = new StringBuffer();
    StringBuffer l_buffer1 = new StringBuffer();
    l_buffer.append("javascript:mywin = openWindow(top, '");
    l_buffer1.append("/jct/oracle/apps/xxpwc/entry/webui/AddAttachmentPG");
    l_buffer1.append("&retainAM=Y");
    l_buffer1.append("&pubOrderId="+pubOrderId);
    String url = "/OA_HTML/OA.jsp?page="+l_buffer1.toString();
    OAUrl popupUrl = new OAUrl(url, OAWebBeanConstants.ADD_BREAD_CRUMB_SAVE );
    String strUrl = popupUrl.createURL(pageContext);
    l_buffer.append(strUrl.toString());
    l_buffer.append("', 'lovWindow', {width:750, height:550},false,'dialog',null);");
    pageContext.putJavaScriptFunction("SomeName",l_buffer.toString());
    But here the problem is, even though popup window is there, i am able to do the actions on the parent page.
    So how to disable the parent page, while getting the popup window.
    Thanks in advance.
    Thanks
    Naga

    Hi,
    You can use javaScript for disabling parent window as well.
    Refer below link for the same:
    http://www.codeproject.com/Questions/393481/Parent-window-not-disabling-when-pop-up-appears-vi
    --Sushant                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • How to Disable "Auto Align" in [System Pref.] - [Display] - [Arrangement]

    Does anyone know How to Disable "Auto Align" in [System Preferences] -> [Display] -> [Arrangement]?
    It always want to align the two screens from the top when they are lined up close together and I need them to be aligned from the bottom. Since the resolution heights are so close together (1080 & 1050) it does not allow one to align side by side from the bottom as it prioritizes top alignment.
    I guess I'm looking for a script to disable this feature.

    Anyone got any ideas?

  • How to disable the "turn page" event triggered by the scroll/swipe function?

    The problem is as follows.
    The default behaviour of Acrobat Reader (both stand alone and browser plug-in) is to allow scrolling/swiping with the mouse wheel/trackpad. This is useful when the pdf's page length is greater than the screen's own length, because you can read the pdf with no need to distract your attention from the text to the scrollbar button. However, the same scroll/swipe function turns into a usability problem when the pdf is embedded in a html page and the pdf's page length is smaller than the browser's length. In this case, the scroll/swipe turns the page, distracting your attention from the text to the unintended behaviour of the browser. What happens is that you are so used to scrolling/swiping that you did it unintentionally in the pdf's caption area. You really did not want to turn pages in the pdf. Furthermore, if the pdf takes the whole html page, being a website, the scroll/swipe function flips the website pages in ways that neither the reader nor the writer had ever intended. Hence the question. How to disable, in this case, the "turn page" event triggered by the scroll/swipe function? A JavaScript should do, but the SDK documents did not help so far...
    Message was edited by: 41457173
    Message was edited by: 41457173

    ... or release a patch for the API,
    ... or suggest an alternative route to achieve the intended result.

  • [Forum FAQ] How to disable Microsoft account default sign-in behavior when accessing Microsoft website on Windows 8.1

    Scenario
    By default it will sign in with current Microsoft account, if a user accesses Microsoft website (www.live.com, www.bing.com, etc.) with Microsoft account on Windows 8.1. This article describes how to disable this default sigh-in behavior if you want to use
    different Microsoft accounts every time. 
    Method
    To disable this default sign-in behavior, we can deny current Microsoft Account read permission of MicrosoftAccountTokenProvider.dll, please follow the following steps:
    Run Command Prompt with elevated permissions.
    Run the following command to take ownership of MicrosoftAccountTokenProvider.dll:
      takeown /f C:\Windows\SysWOW64\MicrosoftAccountTokenProvider.dll
    Run the following command to deny the read permission of the Microsoft:                                
     icacls C:\Windows\SysWOW64\MicrosoftAccountTokenProvider.dll /deny
    [email protected]:r                                                                                                                
    Note: Please replace your current Microsoft Account with the example
    [email protected]
    Change the owner of this file back to TrustedInstaller:
    Right-click MicrosoftAccountTokenProvider.dll under
    C:\Windows\SysWOW64\, choose Properties. Under
    Security tab, click Advanced.
    Click Change, in the box Enter the object name to select, type
    NT Service\TrustedInstaller.
    Click OK.
    Note: This operation would take some hours to work.
    Apply to:
    Windows 8.1
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Error: System cannot find the specified path
    I am getting this eroor
    Parashuram Singade www.distinctnotion.com

  • How to disable airplay mirroring on iPad with ios7

    How to disable airplay mirroring on iPad with ios7?

    I've had this problem ever since I was at my friend's house- she has Apple TV- and my iPad connected automatically. So, I have no idea why any of the practical solutions that people think of are not options BUT, in terms of just getting it done, I did figure out a way. The key for me was getting near another Apple TV. I was out of town so I took my iPad to another friend's house who also has TV. Once I was logged onto their wireless network (the same network that their Apple TV is on-- that's how it connected in the first place), then the Airplay icon and options showed up from the bottom-draw menu and I was able to make sure that mirroring was turned off from the Apple TV section and to make sure the selection was on iPad instead. Problem solved. Now whether or not this will stay the same (rather than me having to make sure it stays at this setting everytime I link up to a network that has an Apple TV on it) I don't know. So my advice is find someone with Apple TV and connect to their network with your iPad and then change it.

  • I have changed the apple ID (email, but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

    i have changed the apple ID (email) but on my iphone , the icloud is stil asking me to log in whit the old email.And it is poping-up on every 10 seconds.I never used icloud, and i dont want to use it.I just dont know how to disable the icloud.

    If you see that pop up you enabled icloud. Whether you want or do not want now to use it irrelevant until you actually disable activation lock.
    In order to do that you have to change your apple id back to do that just long enough to sign in and back out. System will ask you to verify, don't.
    Just sign in on the prompt you getting and then logout. Once done, change apple id to what you have now and verify. Then decide if you want to
    use icloud (who does not want to be able to track their phone if lost or stolen).

  • Can't use down key because it opens automator. Does any one know how to disable this short cut?

    Everytime I press down on down key it opens automator. It doesn't let me delete the app. I don't know what to do, it is very frustating to fill in a chart when I can't use the down key. Does any one know how to disable this short cut?

    Are you talking about the Down Arrow key? To my knowledge there is no way to use that key as a shortcut for anything. But look in the Keyboard section of System Preferences and the Keyboard shortcut tab.

Maybe you are looking for

  • Can I run Adobe CS, CS3, CS4, and CS5 software on Apple Mac upgrade forom Snow Leopard to Maveric OS X ?

    I would like to know if I can run my older Abobe CS, CS3, 4, 5 on an upgrade from Mac OS X Snow Leopard  to OS X Mavericks ?

  • Way to buffer all messages in XI queues

    Hi all, I am searching for a way to buffer all of my incoming and outgoing messages in the queues of XI. I heard a while ago that it should be possible to schedule the queues in XI. Our goal is that all messages that XI (3.0) receives and also all me

  • Configuration Property ,Function Module or BAPI

    Hi Gurus I need information regarding any BAPI or function module which do following job: It'll return the Maintain Value for Characteristic in Configuration View of MM03. ex: I have a material like AFS-MAT Class: AFS_class Characterisic : Size if i

  • Scroller fixed at bottom

    I am having a RichEditableText field fich gets filled with text dynamically. There is a vertical scroller attached to it which should behave exactly the opposite way as it does. I need to have it to stick to the bottom the field, displaying the last

  • I can't Find my Mac on my iPhone even though it's set up correctly

    Friend left her laptop on a plane yesterday.  Flagged it up to me.  I have iPhone 4s and 5s and and iPad and a MacBook Pro.  I can find the phones and the iPad on each other and on the laptop.  However the laptop doesn't appear anywhere.  I read how