How to display a field that has more than 136 char length in ALV GRID

Hi Experts,
I have an issue and need to solve ASAP.
I want to display a text of length 400 character in a particular column in ALV GRID DISPLAY. After executing the report it is displaying only 136 length char in the output and when I download the report to an excel it is showing only 255 characters, but my field length is almost 400 char and want to display in the report output.
I checked in SDN and didnt get any answers which will solve this.
Please help me to complete this issue.
Thanks
Retheesh

Currently I'm in a same problem with you.
And this is what I found
Size of data fields: While the list-based ALVList can display only tables of up to 90 columns, the control-based *ALVGrid and ALVFullscreen have a limitation of 128 characters per data cell.*
So it means that maximum for alv grid is only 128.
Please refer to this documentation
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4544e790-0201-0010-c29c-e46c389f5a96]
you can find the statement above in page 5.
Please let me know if you have another solution, because I would like to see it too.
Thanks
Regards
Hadi

Similar Messages

How to upload a file which has more than 999 line item through BDC ?

Hello Techards
Hi to all
Can any body tell me how to upload a file which has more than 999 line item through BDC for traction F-02 ?
Thanks in advance.
Shovan

Hello Shovan,
You split it up to post two accounting documents with the help of a "suspense" a/c.
Say, you have to post the following line items below:
line 1 - dr. - GL a/c X - $1000
line 2 - cr. - GL a/c Y - $1
line 3 - cr. - GL a/c Y - $1
line 1001 - cr. - GL a/c Y - $1
You cannot post the above as a single doc in SAP (because of technical reasons), so you need to break it up into 2 documents as below:
Doc1
line 1 - dr - GL a/c X - $1000
line 2 - cr - GL a/c Y - $1
line 3 - cr - GL a/c Y - $1
line 998 - cr - GL a/c Y - $1
line 999 - cr - SUSPENSE a/c - $3
Doc2
line 1 - dr - SUSPENSE a/c - $3
line 2 - cr - GL a/c Y - $3
Note that there is no incorrect impact on accounting as first we credit suspense a/c by $3 and next we debit the same suspense a/c by $3 as a result the effect is nil. Similarly, we credit $997 to GL a/c Y (which is less by $3) in the first doc which is compensated by the second doc by crediting the shortfall of $3.
Hope this helps,
Cheers,
Sougata.

Is there any way to create table of more than 30 char length name

hi all,
Please tell me is there any way to create table of more than 30 char length name in oracle 10g
Regards

Hi,
If you want table name to be more than 30 Char.
I am sure,your naming convention is not upto the mark.
Its not possible in 10g as well as in 11g.
Thanks
Yogesh Nagle
India

In Music, sometimes an album that has more than one artist, only one shows up, how do I get them all that are all on the album to play in sequence when I select that album?

I can't figure out why, on my ipod touch in Music, when I select some albums that have more than one artist, the whole album doesn't come up to play all together. This happens in some compilations, and only ne song shows up from each artist on the album. Or like on an artist's album that has someone else singing with her. I get that they are on the same line as an artist, but the album is an album, and when you play an album, the whole thing should play - right? Thanks for your help!

Generally all you need do is give tracks from the same album a common Album Artist. See Grouping tracks into albums. The images need an update but the basic info. still holds.
tt2

Error using JAX-WS to consume a WS that has more than one parameter

I am trying to create a web service proxy in JDeveloper using JAX-WS for an OAM web service from a WSDL (identity/oblix/WebServices/CompositeWebServices/WSDL/um_view_interface.wsdl). I received the following error when I try to run the proxy:
Exception in thread "main" com.sun.xml.ws.model.RuntimeModelerException: runtime modeler error: SEI test.profile.OblixIDXMLPortType has method oblixIDXMLUmView annotated as BARE but it has more than one parameter bound to body. This is invalid. Please annotate the method with annotation: @SOAPBinding(parameterStyle=SOAPBinding.ParameterStyle.WRAPPED)
at com.sun.xml.ws.model.RuntimeModeler.validateDocBare(RuntimeModeler.java:1267)
at com.sun.xml.ws.model.RuntimeModeler.processDocBareMethod(RuntimeModeler.java:1256)
at com.sun.xml.ws.model.RuntimeModeler.processMethod(RuntimeModeler.java:628)
at com.sun.xml.ws.model.RuntimeModeler.processClass(RuntimeModeler.java:416)
at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:267)
at com.sun.xml.ws.client.WSServiceDelegate.buildRuntimeModel(WSServiceDelegate.java:715)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.buildRuntimeModel(WLSProvider.java:427)
at com.sun.xml.ws.client.WSServiceDelegate.addSEI(WSServiceDelegate.java:703)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:347)
at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.getPort(WLSProvider.java:409)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:330)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:312)
at javax.xml.ws.Service.getPort(Service.java:92)
at test.profile.OblixIDXMLService.getOblixIDXMLPort(OblixIDXMLService.java:79)
at test.profile.OblixIDXMLPortClient.main(OblixIDXMLPortClient.java:23)
Process exited with exit code 1.
It seems like the OAM web service (um_view_interface.wsdl) is not WS-I BP 1.1 compliant. It expects two elements under the body. WS-I BP 1.1 specifies that there should be only one child in the body of the element.
The expected request body would look like this, there are two elements under the body:
<soapenv:Body>
<authentication xmlns="http://www.oblix.com/">
<login>loginname</login>
<password>pass</password>
<domain>dc=test,dc=org</domain>
</authentication>
<request application="userservcenter" function="view" mode="dataonly" version="NPWSDL1.0" xmlns="http://www.oblix.com/OblixXMLLocalSchema">
<params xmlns="">
<ns1:uid xmlns:ns1="http://www.oblix.com/">cn=tester,cn=Users,dc=test,dc=org</ns1:uid>
</params>
</request>
</soapenv:Body>
Has anyone encountered the similar problem? Is there a solution to this problem?
Your help is appreciated!

Can u pls share ur solution if u have found a way 2 create a web service with 2 ports.I have not yet found a solution so far and nobody reacted to all my posts in the different fourms. It seems nobody is implementing web services with two ports using the EJB annotations technology.

Is it possible to create a Large Text Field in OCOD, more than 255 Char?

Is it possible to Create a Long Text Field (more than 255 Char Long) as like Description field in OCOD?

Not at this time.

Need to insert into a table 1 of the fields (CLOB)with more than 4000 chars

Dear Gurus,
As far I understood, I need to write a function which get as parameter the large text and using bind variables I can return a CLOB containing more than 4000 chars. I tried all I can do and feel I want to died. Please, can I get specified help in this issue?
I APPRICIATE YOUR HELP, MARCELO.

*** Duplicate Post ***
Please, Marcelo, use the forum properly. Pick a single group and post there.
Thank you.

How to insert a detail record that has more than one master record

I have a somewhat complex situation that I am triying to figure out. I have three tables A, B and C. Table C is a detail table that has a foreign key to table A and table B. There are is nothing else in table C (basically it's used to create a many to many relationship between A and B.
Now I have a application module method that based on some user provided data needs to insert records in tables A and B and link them using table C. I have view links (and associations) between A and C as well as B and C. I can easily go from A and insert (via the view link accessor) a record into C. My problem is that I don't know how to the take that same C row and add it to B as a detail.
I have kinda hacked it by creating a row in B, using postChanges to get it's primary key ID and set the attribute directly in C. It works but I was hoping to find a way to avoid calling postChanges possibly hundreds of times in a loop. I also cannot commit the AM until the process is completed.
I tried setting the "composition association" on both associations but that didn't work either.
Thanks

I'm not sure if this helps, but here's a web page which talks about Image I/O:
http://java.sun.com/products/java-media/jai/iio.html
For your problem, they have a sample solution which can read a specific page of a multi-page tiff file, so perhaps you could make a loop to read all of the pages:
http://java.sun.com/products/java-media/jai/forDevelopers/samples/MultiPageRead.java
Good luck!

How to read a tiff file that has more than one page?

Hi,
I use JAI to read TIFF image and get the pixels from a raster object. A TIFF file can have more than one image in itself. The JAI doc from SUN only mentioned that we can get the number of IFD (image file directory) by using
getNumDirectories() function but no description about how to get different images separately out of one TIFF file. Does any one know how to do it or some example programs implementing such function? Thanks a lot.
Marvin

I'm not sure if this helps, but here's a web page which talks about Image I/O:
http://java.sun.com/products/java-media/jai/iio.html
For your problem, they have a sample solution which can read a specific page of a multi-page tiff file, so perhaps you could make a loop to read all of the pages:
http://java.sun.com/products/java-media/jai/forDevelopers/samples/MultiPageRead.java
Good luck!

Grouping on fields that have more than one value entered. Please need help fast!!!

Post Author: DennisC
CA Forum: General
I am creating a report that is to be grouped on a particular field that can have more than one entry. My user said they did not care how I did it but to only count the record one time. The field that is selected is a dropdown on an form that is in Alpha order. So the entries always appear in the the field in alpha order. This is for use as an example: Record 1 has a value of CAT in the field, Record 2 has a value of CAT, DOG in the field and Record 3 has a value of CAT, DOG, HORSE in the field. I get 3 separate groupings for the 3 records.
Group = CAT
      Then the detail information appears here
Group = CAT, DOG
      Then the detail information appears here
Group = CAT,DOG,HORSE
      Then the detail information appears here
What is would like to see using this example is one group for CAT with all 3 records appearing under it and ignore the other two. This way there would all be getting counted but the report would look a little more streamlined.
Group = CAT
      record 1 detail information
      record 2 detail information
      record 3 detail information
thanks in advanced for any help!!!!

Post Author: shawks
CA Forum: General
I am trying resolve the same/similar issue in Crystal Reports 10. For example, on a table there is a column called X with values Xsub1, Xsub2, Xsub3, etc. The user can select a parameter that includes Xsub2 and Xsub4. If this is selected 2 reports are generated (one for Xsub2 and Xsub4). What we really want is one report with the combined information for Xsub2 and Xsub4. How is (or is it) possible to do this in Crystal Reports 10? FYI - When the report was initially created the main body of the report was placed in the Group Footer so if the Group Footer is suppressed the content of the report is suppressed, too.
Thanks

Can we create a table field with more than 1200 char length

Hi,
As per business requirement, need to create new table - and one of the field should contain 1200 char length. i found the sap data element but when i was activating it was throwing an error.. is there any alternative for this.
Thanks in advance.

hi jayasri,
Can you use datatype as LCHR for the character string.
before creating the string you need to decalre one INTEGER field.
you can refer to the table EDID4 where SDATA field declared.
check for the data type EDI_SDATA.
Hope this will solve your problem.
Regards,
Madhavi

JSP: how to display a String that has HTML

I'm reading contents of a file and want to display them on the JSP page. However, the contents may have HTML tags in them as well. Right now it just displays the String HTML tags, not actually rendering them. How do I display the String so the HTML tags are actually used?
So if the String has "<b>Hello</b>"
I want it to show up in the webpage with the word Hello bolded, not the actual <b> and </b> tags displayed.

Something is escaping the file contents. Perhaps if you dropped a few
hints about how you are actually doing this.

How to Import Excel 2007 worksheet that has more than 255 columns into SQL Server 2008 table using SSIS 2008.

I am using Excel source which uses Microsoft ACE 12.0 OLE DB provider, this only allows the first 255 columns to be imported and not the rest.
I need to export all the columns into the table .
Any pointers to this is greatly appreciated

If you can use third-party solutions, check the commercial COZYROC Excel adapters:
Excel Connection Plus Manager
Excel Source Plus
Excel Destination Plus
Excel Task
The enhanced components can be used both under 32bit and 64bit modes and doesn't exhibit the 255 columns limitation.
SSIS Tasks Components Scripts Services | http://www.cozyroc.com/

TS4000 Reminders and Iphone 4: Updating a Reminder Notes field that is more than 15 lines causes an usability bug

..you can't see what you are typing as it is covered by the "Details" top bar...It is almost impossible to update the Notes field of these reminders

Crackbot wrote:
I awoke after missing several (6-7) phone calls from a single number to find a reminder to call someone back and I didn't create the reminder. And no one else had physical access to my phone. I really hope this isn't anything weird because it seems weird to me.
It's very easy to accidentally create a reminder to call someone back. When someone calls you, there is a small button over the red "Decline" button labeled "Remind Me". If you tap, the call will be declined and a reminder to call back will be created. Easy enough to do if you're groggy and fumbling for the to make it shut up. If you weren't paying attention or were unaware of the feature, it might seem as if you had simply declined the call.

Field consist of more than 60 chars in R3

Hi all,
I am having requirement wher i need to extract the data of material long text by using the FM.
i am planning to create the Gen Datasource with FM, for this i have choosen the field TEXT whose length is 255 char from the table AQGTQ to define in the structure of the FM in R3 side.
In Bw i am creating the 4 info objects which can hold this long description of the material and in the Transfer Rules i am writting the Routine for all 4 infobjects by keep on adding the 60 char.
but pls let me know how it is going to identify that to which material this long text belongs to do i need to keep the matnr as additional info object in the ods n do mapping with the matnr which is passing as the input to the FM and getting this long text.
Pls let me know whether it works correctly
Thanks in Advance

Hi all,
i have created 3 info objects of char and i am getting the long descrp in a single field from R3. do i need to write in both the start routine as well as the at the transfer rule level for particular info objects.
pls let me know. Pls provide me the sample code.
Regards

How to display a field that has more than 136 char length in ALV GRID

Similar Messages

Maybe you are looking for