How to display a keyfig without showing UOM in report

Hi
Our users donot want to see Unit of measure along with keyfigure in reports, how do we do this? If it is quantity, in FI area, it gives for something like 1000.000 HS0 or HS 2 etc... How can we change the property on key figure not to display this Unit of measure? Any help would be appreciated. Another question I have is how to delete certain query views from centralized location.
Thanks
Pandiri

Hi
I have the same question. I have a key figure with Quantity type and UOM PC. I want to display quantity number without the units PC.
I think NODIM() function applies it to all key figures right? How do i apply it to only one key figure. the rest of the key figures I want units to be displayed.
Thanks

Similar Messages

How to display subtotals in separate column in alv report?

hi,
I am displayed the subtotals for QUantity field BDMNG in Reuse_alv_grid_display in the same column.
but I want to display subtotal in separate column.
How to display subtotals in separate column in alv report?
thanks&regards.
samba.k

Hi
As far as i know you can't do this,the option you have is to create one more column (subtotal) and populate it by manual calculation at every subtotal (not alv subtotal but yours) .
Best Regards
Yossi

How to Display 'purchase order text' in MM03 using report program

Hi Friends,
Can anybody suggest me how to display 'purchase order text' in MM03 using report program.
'Purchase order text' tab displays purchase long text of particular material .
I coded as:
      SET PARAMETER ID 'MXX' FIELD 'E'.
      SET PARAMETER ID 'MAT' FIELD k_final-matnr.
      SET PARAMETER ID 'WRK' FIELD k_final-werks.
      CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
It displays Purchasing tab other than Purchase Order Text tab of MM03.
Please suggest me how can i solve this.
Is there any parameter id to set values for Purchase Order text tab

>
Madhu Mano Chitra wrote:
> I want how to navigate to MM03 'Purchase Order text' tab/ view using ABAP code.
> could any suggest me
You can call a transaction and pass it a BDC table that tells it where you want it to go. You have to work out for yourself what to put into the BDC table. The code below works for tcode CATSSHOW.
DATA: bdcdata_wa TYPE bdcdata,
      bdcdata_tab TYPE TABLE OF bdcdata.
DATA opt TYPE ctu_params.
   CLEAR bdcdata_wa.
    bdcdata_wa-program = 'CATSSHOW'.
    bdcdata_wa-dynpro   = '1000'.
    bdcdata_wa-dynbegin = 'X'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'SO_STATU-LOW'.
    bdcdata_wa-fval = '20'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'ANDZEIT'.
    bdcdata_wa-fval = SPACE.
    APPEND bdcdata_wa TO bdcdata_tab.
    CLEAR bdcdata_wa.
    bdcdata_wa-fnam = 'PAST'.
    bdcdata_wa-fval = 'X'.
    APPEND bdcdata_wa TO bdcdata_tab.
    IF p_selscr = SPACE.
       CLEAR bdcdata_wa.
       bdcdata_wa-fnam = 'BDC_OKCODE'.
       bdcdata_wa-fval = '=ONLI'.
       APPEND bdcdata_wa TO bdcdata_tab.
    ENDIF.
    opt-dismode = 'E'.
    opt-defsize = 'X'.
CALL TRANSACTION 'CAPP' USING bdcdata_tab OPTIONS FROM opt.

How to display multi line headings in procedural alv report

Hi experts,
How to display multi line heading in alv( procedural alv report) report.
some columns single line and some columns multi line in the same report.
ex:
solvent consumed solvent recovered
fresh | recovery recovery | spent batch no storage
I am using procedural alv .pls give me idea.

Hi Ram,
Check the sample report [how to display multi line headings in procedural alv report|http://sample-code-abap.blogspot.com/2008/01/printing-multiple-line-header-and.html]
Thanks,
Duy

How to display Calendar view without having to select date

Hi there,
I would like to know can I display Calendar view without having user to select date first.
And also, how do I highlight the date in calendar view for example, to show that i have set a reminder on that date?
I have searched many threads before, but I could not get the final answer.

Hi,
Is there a way to display a full calendar popup with time stamp so the users can pick the timestamp from the popup?Date Picker doesn't have this feature. You can use Javascript to achieve the same. But at same time it's highly unrecommended to use javascript with OAF pages.
Regards,
Gyan

How to display and print CCR showing not only results, high, low or normal, but also normal ranges of tests.

How do I display and print CCR showing not only my actual results, high, low or normal results, but also normal ranges of each test? I can do this individually but not for the composite CCR.
Thanks.

Hi,
I'm not exactly clear on what you are doing. I can tell you that the ranges and flags for high, low, and normal come from the lab results provider in the lab results they sent you, not from HealthVault. If you go back to the original document that came from
the laboratory, you should be able to open it as a document and print it.
I hope this helps. If not, please respond with more details, or if you'd prefer a private conversation, please contact HealthVault customer support by opening a support ticket with them.
Thanks,
Kathy

How to display table data without using ALV and table element.

Hi,
        Its possible to display table data without using ALV and table element.
       Every time i am fetching data based on (customer,status) fields and displaying these data in my output using alv
       (every time i am fetching single row data ),
       But problem is alv occupying more space in the output , i want to display data part only i dont want field names,
       settings and header data etc..things.
      Give solution to display data part..
Regards,
Rakhi.

Hi,
Does you mean that you need ALV without default Function Toolbar...? If this is the case, the easy solution would have been to use Table Element rather. But, if you need to use ALV only without Function Toolbar, you can do away with that as well.
In that case, after calling GET_MODEL, you need to add few more lines of codes to achieve your goal. Those lines are --
DATA LV_VALUE TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
    LV_VALUE = LO_INTERFACECONTROLLER->GET_MODEL(
* Standard Filter Function setting to FALSE
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_SORT_COMPLEX_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_FILTER_COMPLEX_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_FILTER_FILTERLINE_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_DISPLAY_SETTINGS_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_VIEW_LIST_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_SORT_HEADERCLICK_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_HIERARCHY_ALLOWED( ABAP_FALSE ).
* Standard Filter Function setting to FALSE Ends
Here as you can easily notice that LV_VALUE is instantiated on CL_SALV_WD_CONFIG_TABLE. Now, using this LV_VALUE, you set standard functions as False to dis-allow their display.
Hope this answers your query.
Thanks.
Kumar Saurav.

How to display multiple prompt values selected, in the report

Hi,
I have a LOV : SELECT DISTINCT CO.V_MOVEMENT.ORIGIN_BRANCH_CODE FROM CO.V_MOVEMENT ORDER BY 1
and a parameter associated with it which is multiple selection enabled. The parameter name is P_BRANCH.
When I am displaying P_BRANCH at the top of my report (RTF), it's showing only one value whereas I need to display all the selected value as Comma Separated.
Please help.
Thanks & Regards,
Antara

The other option to fetch all the selected values to the report (RTF) is to create a dataset for the field and in the template create a repeating group for each value.
Eg:
1) The SQL is : ( In SQL Server, where :P_S_ORIGIN_BRANCH_CODE is Prompt )
SELECT DISTINCT
:P_S_ORIGIN_BRANCH_CODE as P_BRANCH
2) XML is :
<DATA_DS>
<G_1>
<P_BRANCH>RTM</P_BRANCH>
</G_1>
<G_1>
<P_BRANCH>ABC</P_BRANCH>
</G_1>
</DATA_DS>
3) In report we can display the values as below:
RTM,
ABC
But The Required Output in RTF is : (Values seperated by ",")
RTM, ABC
Your help would be highly appreciated.
Thanks & Regards,
Antara
Edited by: user450412 on Oct 10, 2011 4:11 PM

Displaying previous page without running it's report region sql?

Hi, I just created a button which is PREVIOUS and redirects to the previous URL. However I was hoping I could just display the previous pages report results again without re-running the report sql.
The PREVIOUS button seems to re-run the sql ... is there any way of just caching the previous pages sql results and then they are instantly displayed from the next page by pressing the PREVIOUS button?
Thanks

Scott, this command works great. If you dont submit the current page it is fine. Is there a way to branch back to the previous page disregarding the current pages submissions as if you submit the current page then the command will only branch back to the same page but before it was submitted?
Thanks

How to display more than 60 columns in a report

I have a table defined as follows
id
column_name
column_value
data sample
id col_name column_value
1 col1 val1
1 col2 val2
1 col3 val3
2 col1 val1
2 col2 val2
2 col3 val3
now I want to display the data in a report as follows
id col1 col2 col3
1 val1 val2 val3
2 val1 val2 val3
I was able to generate output using pivots [http://technology.amis.nl/blog/1197/pivot-dynamic-data]
the problem is that I can have more that 60 columns retrieved in each row, the pivot solution will retrieve them correctly but I can't display more than 60 columns in apex reports, why this restriction in apex, any solution

Hello:
In the Source section of the report definition choose 'Use Generic Column Names (parse query at runtime only)' and then specify a suitable value for 'Maximum number of generic report columns:'
Varad

How to display a table without selecting the first row as default ?

Hello All,
Can someone advise on how I am able to display a table but with no row selected on initial display ? Currently, the table is being displayed with the first entry selected by default (The orange box is selected). Thank you very much.
from
Kwok Wei

Javadoc for IWDNode says:
public void clearSelection()
    Clears the Node's multiple selection; does not change the lead selection.
public void setLeadSelection(int index)
    Sets the lead selection to the given index. It may be called with NO_SELECTION to reset (clear) the lead selection.
    Parameters:
        index - the index of the element
    Throws:
        ContextException - if caller tries to reset the selection, but selection is mandatory
        IndexOutOfBoundsException - if the given index is not within the element list
    See Also:
        getLeadSelection()
Armin

HT3964 My mac does display videos but without showing the image just voice

for some videos my mac disply only the voice without image

Alright, very good.
Have you tried a PRAM reset? OS X Mavericks: Reset your computer’s PRAM

[Forum FAQ] How to display an image from Http response in Reporting Services?

Question:
There is a kind of scenario that users want to display an image which is from URL. In Reporting Services, if the URL points to an image file, we can directly display it by typing the URL in embedded image. However, some URLs are just sending Http requests
to server side, then redirect to another position and the server will return the image. For these kind of URLs, Reporting Services can’t directly render the image from Http response.
Answer:
To achieve this goal, we can add custom code into the report. Pass the URL as argument into our custom function so that we can create HttpRequest and get the HttpResponse. Then we can use custom function to return the Bytes() from the HttpResponse and render
it into an image in report.
Ps: In Reporting Services, it only support drawing Bytes() array into image, so we need to have our custom function return Bytes array.
Add the assembly and custom code into the report.
Public shared Function GetImageFromByte(Byval URL as String) As byte()
                Dim photo as System.Drawing.Image
         Dim Request As System.Net.HttpWebRequest
       Dim Response As System.Net.HttpWebResponse
              Request = System.Net.WebRequest.Create(URL)
                 Response = CType(Request.GetResponse, System.Net.WebResponse)
             If Request.HaveResponse Then
                  If Response.StatusCode = Net.HttpStatusCode.OK Then
                       photo = System.Drawing.Image.FromStream(Response.GetResponseStream)
                 End If
            End If
              Dim ms AS System.IO.MemoryStream = new System.IO.MemoryStream()
             photo.Save(ms, System.Drawing.Imaging.ImageFormat.Jpeg)
                Dim imagedata as byte()
                imagedata = ms.GetBuffer()
                return imagedata
End Function
Grant the permission for assemblies.
Go to:
C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\RSpreviewPolicy.config
C:\Program Files\Microsoft SQL Server\MSSQL\Reporting Services\ReportServer\rssrvpolicy.config
Give “FullTrust” for Report_Expressions_Default_Permissions.
Insert an image into report.
Expression:
=Code.GetImageFromByte("https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcSrVwPoAtlcA2A3KaiAJi-XjS4icr1QUnKYr7uzpX3IL3g2GPisAQ")
The Result looks below:
Applies to:
Reporting Services 2005
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012
Reporting Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

>
Hi, I'd like to display a dynamic image from the web inside a JLabel or any other swing component it could work in. I've been looking on the Swing tutorials and others forums, all I can have is that a JLabel can load an Icon object, defined by an image URL, but can this URL be like "http://xxxxx/image.jpg" somehow or can it only be a local image URL?>
I do not know why you start talking about an image on the web then go on to show concerns about whether it will work for a 'local' URL.
But perhaps this answer will cover the possibilities.
So long as you can from an URL to the image, and the bytes are available for download (e.g. some web sites wrap a direct call to an image in HTML that embeds the image), the URL based icon constructors will successfully load it.
It does not matter if that URL points to
- a web site,
- a local server ('localhost'),
- an URL representation of a File on the local file system, or
- it is inside a Jar file that is on the application's run-time classpath.
How you go about forming a valid URL to a 'local resources' (or indeed what you regard as local resources) is another matter, depending on the form of the project, and how the resources are stored (see list above).
Probably the main reason that examples use images at a hard coded URL on the net is that it makes an 'image example' self contained. As soon as we compile and run it, we can see the result. I have posted a few examples like that on these forums.
Edit 1:
BTW - Welcome to the Sun forums
Edited by: AndrewThompson64 on Apr 21, 2009 12:15 PM

How to display images in a simple or alv report

Dear gurus ,
i want to create a classical or ALV Report showing material codes(mara-matnr) and their respective images .
how can i achieve it means where i will store the images and how i will fetch it in the report .Plz send any sample code for this . Full points will be awarded .
Thanks ,
Amit Ranjan .

hi
please use the following procedures
Upload Logo for REUSE_ALV_COMMENTARY_WRITE
For those who wish to upload and use a picture in your ALV abap reports.
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
or
Import Logo and Background Picture for Reporting
In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
From the SPRO:
HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
Activities
1. Enter the Name of your logo/background picture as an object key in the initial screen.
2. Make sure that the class name is PICTURES, and the class type is OT.
3. Choose Execute.
4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.
reward points if useful,
Thanks,
Usha

How to display Base values (AFS Grid) in the Report

Hi Friends,
We ar using AFS, in that we have Grid value like 0003A34
(8 chars: first 4 chars colour (0003), A represents Cup, 34 represents size of the Material), in that we can able to store the Base values like for International or US,
and for size 34 equivalent to 70 like wise.
In our reports we are using ALV grids, and showing the existing grid value like 0003A34, but we need to show Base value list like INTL or US etc, based on the region / area, the report should show the equivalent grid value like 0003A70 etc.
Please help me how to do this.
Thanks
Shankar

Dear Shankar;
I think you will be able to achieve what you try to do using grid conversion in AFS. Base Grid values can be converted to other values based on the customer, vendor or material depending on your requirement. This need to be configured in IMG and then the ID must be assigned in the Vendor or the Material Master as per the requirement.
This is somewhat complex config. Please contact me if you need any more clarifications ([email protected])
Azwath Mohammad
http://www.sapafs.net

How to display a keyfig without showing UOM in report

Similar Messages

Maybe you are looking for