How to display multiple prompt values selected, in the report

Hi,
I have a LOV : SELECT DISTINCT CO.V_MOVEMENT.ORIGIN_BRANCH_CODE FROM CO.V_MOVEMENT ORDER BY 1
and a parameter associated with it which is multiple selection enabled. The parameter name is P_BRANCH.
When I am displaying P_BRANCH at the top of my report (RTF), it's showing only one value whereas I need to display all the selected value as Comma Separated.
Please help.
Thanks & Regards,
Antara

The other option to fetch all the selected values to the report (RTF) is to create a dataset for the field and in the template create a repeating group for each value.
Eg:
1) The SQL is : ( In SQL Server, where :P_S_ORIGIN_BRANCH_CODE is Prompt )
SELECT DISTINCT
:P_S_ORIGIN_BRANCH_CODE as P_BRANCH
2) XML is :
<DATA_DS>
<G_1>
<P_BRANCH>RTM</P_BRANCH>
</G_1>
<G_1>
<P_BRANCH>ABC</P_BRANCH>
</G_1>
</DATA_DS>
3) In report we can display the values as below:
RTM,
ABC
But The Required Output in RTF is : (Values seperated by ",")
RTM, ABC
Your help would be highly appreciated.
Thanks & Regards,
Antara
Edited by: user450412 on Oct 10, 2011 4:11 PM

Similar Messages

Can we generate one report tab for each of the prompt values selected in the bobj 4.0 webi report.

can we generate one report tab which filters
with each prompt value selected in bobj 4.0 webi report.

Hi Shrinidhi ,
It can be achievable with static tabs created for each LOV .But this is not recommended because , object values can change dynamically .
It is good idea to use section on prompt object in the report .With sections great feature available is in larger report it’s easy to navigate using map. It displays the section tree.You can select the particular LOV to navigate.

How to place multiple characteristic values for a single Report line

hi friends,
      I want to display a report with multiple characteristc values in different columns for each instance, For example there are 2 instances and they have multiple characteristics , so all characteristics of each instance should be displayed in multiple columns in one by one in the same row.
Thanks in advance.
RK
Message was edited by:
        RK

Hi RK,
    Try this it may help you for multiple values for one instance....
*Type-pools
TYPE-POOLS: slis.
Data declarations.
DATA: BEGIN OF t_vbak OCCURS 0,
vbeln TYPE vbeln,
bstnk TYPE vbak-bstnk,
erdat TYPE vbak-erdat,
kunnr TYPE vbak-kunnr,
END OF t_vbak.
DATA: BEGIN OF t_vbap OCCURS 0,
vbeln TYPE vbeln,
matnr TYPE vbap-matnr,
netpr TYPE vbap-netpr,
waerk TYPE vbap-waerk,
kwmeng TYPE vbap-kwmeng,
meins TYPE vbap-meins,
END OF t_vbap.
DATA: t_fieldcatalog1 TYPE slis_t_fieldcat_alv.
DATA: t_fieldcatalog2 TYPE slis_t_fieldcat_alv.
DATA: v_repid TYPE syrepid.
DATA: s_layout TYPE slis_layout_alv.
DATA: v_tabname TYPE slis_tabname.
DATA: t_events TYPE slis_t_event.
start-of-selection event.
START-OF-SELECTION.
v_repid = sy-repid.
Get the fieldcatalog for the first block
PERFORM get_fieldcat1 CHANGING t_fieldcatalog1.
Get the fieldcatalog for the second block
PERFORM get_fieldcat2 CHANGING t_fieldcatalog2.
Get the data for the first block
SELECT vbeln bstnk erdat kunnr UP TO 10 ROWS
INTO TABLE t_vbak
FROM vbak WHERE vbeln > '0060000100'.
Get the data for the second block
SELECT vbeln matnr netpr waerk kwmeng meins UP TO 10
ROWS
INTO TABLE t_vbap
FROM vbap WHERE vbeln > '0060000100'.
init
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = v_repid.
First block
v_tabname = 'ITAB1'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = s_layout
it_fieldcat = t_fieldcatalog1
i_tabname = v_tabname
it_events = t_events
TABLES
t_outtab = t_vbak.
Second block
v_tabname = 'ITAB2'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = s_layout
it_fieldcat = t_fieldcatalog2
i_tabname = v_tabname
it_events = t_events
TABLES
t_outtab = t_vbap.
*Display
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
FORM GET_FIELDCAT1
Get the field catalog for the first block
FORM get_fieldcat1 CHANGING lt_fieldcatalog TYPE
slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
Order number
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname = 'T_VBAK'.
s_fieldcatalog-ref_tabname = 'VBAK'.
s_fieldcatalog-ref_fieldname = 'VBELN'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Customer purchase order.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'BSTNK'.
s_fieldcatalog-tabname = 'T_VBAK'.
s_fieldcatalog-ref_tabname = 'VBAK'.
s_fieldcatalog-ref_fieldname = 'BSTNK'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Creation date.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'ERDAT'.
s_fieldcatalog-tabname = 'T_VBAK'.
s_fieldcatalog-ref_tabname = 'VBAK'.
s_fieldcatalog-ref_fieldname = 'ERDAT'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Customer
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'KUNNR'.
s_fieldcatalog-tabname = 'T_VBAK'.
s_fieldcatalog-ref_tabname = 'VBAK'.
s_fieldcatalog-ref_fieldname = 'KUNNR'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
ENDFORM.
FORM GET_FIELDCAT2
Get the field catalog for the second block
FORM get_fieldcat2 CHANGING lt_fieldcatalog TYPE
slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
Order number
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname = 'T_VBAP'.
s_fieldcatalog-ref_tabname = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'VBELN'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Material number
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'T_VBAP'.
s_fieldcatalog-ref_tabname = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'MATNR'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Net price
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'NETPR'.
s_fieldcatalog-tabname = 'T_VBAP'.
s_fieldcatalog-ref_tabname = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'NETPR'.
s_fieldcatalog-cfieldname = 'WAERK'.
s_fieldcatalog-ctabname = 'T_VBAP'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Currency.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'WAERK'.
s_fieldcatalog-tabname = 'T_VBAP'.
s_fieldcatalog-ref_tabname = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'WAERK'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
Quantity
s_fieldcatalog-col_pos = '5'.
s_fieldcatalog-fieldname = 'KWMENG'.
s_fieldcatalog-tabname = 'T_VBAP'.
s_fieldcatalog-ref_tabname = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'KWMENG'.
s_fieldcatalog-qfieldname = 'MEINS'.
s_fieldcatalog-qtabname = 'T_VBAP'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
UOM
s_fieldcatalog-col_pos = '6'.
s_fieldcatalog-fieldname = 'MEINS'.
s_fieldcatalog-tabname = 'T_VBAP'.
s_fieldcatalog-ref_tabname = 'VBAP'.
s_fieldcatalog-ref_fieldname = 'MEINS'.
APPEND s_fieldcatalog TO lt_fieldcatalog.
CLEAR s_fieldcatalog.
ENDFORM.
Plz Reward points if contents are useful,,,
Regards,
Mandeep.

How to display top 10 values in a Webi report?

Hi,
I have the following requirement.
If the report contains 'State' and 'Revenue' columns, I need to display top 10 cities with highest revenue and the revenue of the remaining cities can be summed together and should be available in a separate cell.
I tried several formulae to achieve the requirement but was unsuccessful.
I created a variable using the formula: '= If (Rank(<State> ,<Sales revenue>)>10 ) Then Sum(<Sales revenue>) Else 0' and added it as a column in the report. This provides the required results.
When I add this variable as a column in the report, it displays 0 for the first top 10 values and only displays the remaining values. After that we can apply the Sum on this column to get the sum of the remaining (Other) sales revenue excluding top 10 values. However I cannot display this sum in a separate cell.
Please provide some suggestions on this.
Regards,
Aditya Joshi

Hi Aditya,
Could you please try the following solutions to resolve the issue.
Solution1:
In Oracle, there is a function called: RANK() OVER (PARTITION BY () ORDER BY ()) which can be used to define an object at Universe level to return a rank position when used in a report. If you can check with your DBA - there is a similar function available for SQL Server. It should be RANK() OVER (ORDER BY colname) AS () FROM.
Solution2:
Or you can also try returning all rows in query, apply sort at report level & apply alerter to highlight the top 10 values.
Regards,
Sarbhjeet Kaur

How to display more than 255 characters in the report

Hi all,
In my program, i try to output a variable type c length 500 in the report. But this report still keep on display 255 characters only although i had set the line-size to 500.
Is there any method output all characters?
thanks,
Janice

Hi Janice Yeoh,
I am assuming this is classical report......And just need to do is increase the line-size in report statement. Find below for small example which i ve tried..
REPORT ytest1 LINE-SIZE 500.
DATA : BEGIN OF it OCCURS 500,
        v TYPE c,
        END OF it.
DO 503 TIMES.
IF sy-index = 500.
    WRITE '500'.
ELSE.
    WRITE : 'X' NO-GAP.
ENDIF.
ENDDO.
Dont forgot to Reward me points .....All the very best....
Regards,
Sreenivasa sarma K.

Display Multiple Prompts Togather

Hello,
How to display multiple prompts in Answers/Dashboard. I know the prompts appear one after the other but, our requirements is to display multiple prompts in Dashboard togather. The prompts should be in cascade format.
There are 3 selections
1) Dept
2) Sub Dept
3) Group
On selection of Dept the Sub Dept get populated dynamically, and Groups gets populated based on Sub Dept Selection.
-Amit.

Hi Amit,
I'm not sure exactly what you mean, but have yo tciked the Constrain option on the two lower levels in the promt, that will ensure you only get the correct values based on teh department selected, if you want these to populate with a value automatically you will have to work out a way to do it using the defauilt value option, this can be based on a SQL query if that helps.
Regards
Ed

Display Multiple Parameter Values in Specific Format

In CR XI, I have a string parameter that allows single and multiple values.
Values are Ward 1, Ward 2, Ward 3, Ward 4
Iu2019m still a newbie at Crystal and canu2019t figure out how to display the parameter values in the report header in a specific way. Join({?ward},",") works fine to show the values selected, but the format is awkward.
Would love to hear any suggestions on a formula that will display the parameter values in the header as follows:
For a single parameter value:     Ward 1
For two parameter values:     Wards 1 and 2
For three parameter values:     Wards 1, 2 and 3
If all four values are selected:     All Wards
Hope I made my question clear, and thanks in advance!

Thank you so much for your response; it does work, at least partially.Certainly is pointing me in the right direction.
Is it possible to modify the case statement to add more arguments? I tried, but it didn't work correctly, although that is likely user error.
For instance, if selecting a single value, it could any of the wards, not just Ward 1. And multiple values could be Wards 2 and 3, or Wards 1 and 4, or Wards 2, 3 and 4. There are at least a dozen different possibilities, and I need a formula or case statement to account for all those possibilities.

How to accept multiple attachments on selection screen?

Hi All,
I need to know how to accept multiple attachments on selection screen and send them as email to external system (outlook).
Basically, my req is to send a common email with attachments to certain users. These users are displayed in ALV. User will select ALL or specific user from ALV and send an email with message entered on selection screen.
I used text editor control to input message body. I need to know how to accept attachments and send them.
Appreciate any inputs.
Thanks,
SKJ

SAP uses a nifty little button called 'Object Services' on ME23N (top left) which you can use to attach documents to business objects.
http://help.sap.com/saphelp_nw70/helpdata/EN/be/3fe63659241157e10000009b38f889/frameset.htm
It's a complicated way of doing it but might give you extra functionality in the long run.

How to display a variable value in WAD?

I am using a replacement path variable to filter a report by project number. While this works fine, the project number is not easily visible (only via Filter -> Display All Filter Values and this only displays the description, not the key).
How can I display the key and the description of the project number variable at the top of the report?
Thank you,
Dennis

The first part is right -
1) drag a text element onto the page, at a location in which you want the variable value to be displayed
2) On the left hand bottom page - go to the web item properties for the text element
3) scroll down to the specific properties for the item - in that uncheck the first two check boxes - display general text elements & display static filter values
4) in the next item in the properties (List of text elements) click once on the box where List is written and then clcik on the small browse button that appears.
5) in the window that opens, in the element type field, select variable/variable value as key (as per your requirement) and then under the element ID field type in the technical name of your variable that you want to display.
click ok and save your template and try executing it.
See if this solves your problem.
regards,
Nikhil

How to display first row value returened from a query as checked as default in a report

How to display first row value returned from a query as checked as default in a report
Example
Parameter 1
Paramerter2
ABD
x(checked)
Test
DEF
JMG
Mudassar

Hi Mudassar,
The issue is caused by the order in which the parameters appear in the report data tab can be difference between our report execution and it failing. In other words, “Parameter2” is execution before parameter “A” due to this issue. We can adjust the parameter’s
order to solve the issue.
If “Parameter2” is parameter “A”, we cannot use that expression. Because fields cannot be used in report parameter expression, if we want to display the first value returned from a query as default value, we have to fill the “Specify values” text box with
the specific value in Default Values dialog box.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How to Display multiple records in Table in VC without using BAPI.

Hi All,
I am working on Visual composer (NW2004s SP10). I am trying to display Poitems from BAPI_PO_GETDETAIL. I am creating my front end using VC. I have created one form and one Table where I want to display POItems. I am writing my logic of retrieving data from BAPI in CAF.I am connecting them in Guided procedures.When I run my process in Guided Procedures I am getting single row displayed in table. Can Anyone help me how to display multiple rows in table.
Regards,
Sheetal

Hi Sheetal,
if the BAPI returns a table, then you get multiple rows. From which system is the BAPI, so that I can check the BAPI to give you further information.
Best Regards,
marcel

Need to clear last selected prompt values while refreshing webi report

While using ALL within cascading prompts its still showing the last prompt values selected in infoview and not while editing and trying to run webi reports.
Is there any way to clear this?
I have implemented following options to resolve but did not work
1) Delete the .lov files of universe.
2) Delete the contents in data folder by going into storage directory
3) Implemented the non_persistent concept in prompts
Code is as follows for the filter with in universe
@Select(Customised LOV\State) = @Prompt('Select State','A','Customised LOV\State',mono,free,Not_Persistent,,)
or
'ALL' = @Prompt('Select State','A','Customised LOV\State',mono,free,Not_Persistent,,)

Hi,
In Web Intelligence, the Query Filter Condition consists of 3 parts:
- Object on which condition is applied
- Operator (=,<,>,matches pattern, etc)
- Operands (constant, LIst of Values, etc)
You will find a button with a "?" sign which is also called as Prompt properties. When you click on this button, a new window will open and in this you have an option for "Keep last values selected" which is checked by default.
Uncheck this check box --> Click OK. Run the report and save --> Relaunch InfoView to avoid any caching problems.
Hope this works for you
Sheeba

How to display multiple attachments in UWL item in portal?

HI,
How to display multiple attachments in UWL item in portal?
I want to display more than one attachment in UWL body,present its dispalying one attachment.
Pls help on this
Thanks,
Bheem
Edited by: v bheem on Aug 4, 2009 3:10 PM

Hi,
Are you able to manage this! Pls do let us know if you have done any configuration changes!

How to display multiple thumbnail images in jframe

hi
please help me about how to display multiple thumbnail images in jframe

Multi post:
http://forum.java.sun.com/thread.jspa?threadID=627253&messageID=3588990

To display multiple BOMS by selection

I'm trying to avoid havig to create a report to collectively display multiple BOMS by selection (eg MRP controller, group of header materials etc) to satisfy the following:
- collective display
- multi-level display (indented)
- factor scrap, giving component qtys as per base qty of BOM header
Trans CS11 provides this info, only on an individual BOM basis.

Hi,
Can explain your query a bit more in brief?
Thanks
Kathir~

How to display multiple prompt values selected, in the report

Similar Messages

Maybe you are looking for