How to display ALV list with more than 1 structure?

Hello everyone,
I am using REUSE_ALV_LIST_DISPLAY to generate a report that displays vendor/customer items with purchases/sales total. I have 2 internal table for this. For every vendor/customer i need a total table right after, this have a different structure. I cannot use REUSE_ALV_BLOCK_LIST_ as this is not capable of calculating the subtotal per currency and from the documentation it says do not use.
Any idea on how to proceed?
Thanks!

Call ALV list function module per table structure.
Closing this thread.

Similar Messages

I have iPod shuffle 2nd gen. 1GB, how can I autofill it with more than 70 songs?

I have iPod shuffle 2nd gen. 1GB, how can I autofill it with more than 70 songs, when I used to be able to get more than l20+ songs?

Is your shuffle full after the Autofill? Does the playlist you selected as the source have more than 70 songs?
My 2nd gen 1GB shuffle currently has 140 songs on it, almost 100% full using Autofill. The number of songs depends on two factors. One is the average length of the songs. Longer songs take more space. A 20-minute symphony takes more space than a 4-minute pop song. The other key factor is the bit rate used for compression.
All of my songs are compressed using the AAC encoder at 256 kbps, which is Apple's current standard and the setting used for downloads from the iTunes Store. The same songs compressed at 128 kbps AAC takes up half the space. 320 kbps MP3 would use more space per song. If a lossless format, such as Apple Lossless or AIFF is used to encode, the sound quality is the best possibe, but the file size per song is MUCH higher.
If you think there is problem on the shuffle, you can try doing a Restore in iTunes. The Restore button is on the shuffle's Settings tab. This will erase the shuffle, re-install its software, and set it to default settings. If there is data corruption on the shuffle's storage that is causing this problem, a Restore should fix it.

How: can i get a specificated item from a list with more than 100.000 items

Hi,
i have a very large list and i got always an exception that the list has more than 5000 items and cant query!! But in the default list view i can see, order and filter all items. So how can i do this by c#?

Hi,
According to your description, my understanding is that you want to get a specific list item form a list which with more than 100000 items using C#.
I suggest you can use CAML Query with some condition and set Row Limit to specify the number of items to return.
Here is a detailed code demo for your reference:
Client Object Model Access Large Lists/Overcome ListView Threshold while accessing large list
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

SPOOL - how to display output list of more then 255 characters?

Hi,
First of all, I would like to say hi to all of you here, as a new member :)!
I've just discovered this forum - I'm very new and let's say unexperienced in SAP, unlike you :)!
Didn't know where to put my subject (in what folder) so I apologize in advance if I'm mistaken... I work as an ABAP programmer in SAP Core and SAP IS-T and currently I'm worried about this problem:(!
We have these huge reports in IS-T that have to be run in background, because of lot of data. Most of reports are very wide and don't fit in those 255 characters that is SAP standard for spool display. Now I'm dealing with this RFC that has to provide spool display with 800 characters, and this has to be on production by tomorrow:)!!!!!
First I created new format type (ZX_65_800) in transaction SPAD and assigned it to my local printer. I thought this would be enough, but I was wrong. Because when I try to run my programe in background, the system doesn't offer me my format at all :(!
Is there anything else I must do in order to get it.... (I work in Release 620)
If anyone had the same problem, please contact me!
Thanks,
BR,
Sanja

Hi All,
We have been looking for a solution for what I believe is the same problem, for more than 2 years now. I would just like to verify with you, if your requirement are similar to ours.
Problem:
1.     Requirement is to run large HR reports either standard or with Ad Hoc Query in background mode in a company with more than 50,000 employees.
2.     Nobody wants printed reports these days. We want to save the forests. Customers prefer to be emailed an Excel file so they can do further data analysis, filtering, pivot tables etc.
3.     Reports are running OK in foreground for smaller sections of the organisation, where you send the output to Excel from ALV, or save as a local file in spreadsheet format.
4.     But large reports for entire company are awkward, tie up your PCs resources, and complex reports accessing many tables can timeout before completion.
5.     So scheduling these reports to run in background would be the ideal solution.
6.     However when we access the report output from SP02, we find that most reports (say with more than 13 or so fields) have an output wider than 255 characters and the output of the spool file wraps to the next line in Excel. It is very tricky to then parse the data back into one row for each employee. And you have a problem if you output is for 50,000 or so employees, because then you file is 100,000 rows and will not load completely into Excel limit problem of 65,536 characters.
7.     We simply want a spool file that does not wrap the data to the next line after 255 characters.
8.     But how to explain this simple requirement to some technical people. It seems a lot of posts on SDN think we always want to print a spool file. NO remember the forests!
Possible Solutions:
I see a lot of posts here that refer to OSS note 186603, but they dont mention the target for the output of the spool is to import into an Excel File (i.e. spreadsheet format). Just search for 186603 or Spool request with more than 255 columns. There is also a reference to OSS note 313566. I am not sure if these will work?
I have also seen the suggestions that you need to define a customer printer format that does not wrap the output after 255 characters (create a new format type in transaction SPAD).
Did you find a solution yet to this problem, do the solutions above work, or can anyone else help us!
John McKee

To display text field with more than 1000 length in ALV

Hi Friends,
I need to display material long text field which is more than 1000 length in ALV or Object oriented ALV.
Please help me to resolve the issue.
Regards,
Jaya.

Hi,
U mean to say in a single cell of ALV ??
It is not possible in ALV .. As per OSS note 857823
Below is the reason for same.. I think you should to split in number of columns.
Summary
Symptom
Entries in cells of the type CHAR or string are truncated after 128 characters in the SAP GUI.
Other terms
ALV Grid Control (cl_gui_alv_grid), function module (Full-screen)
Grid (Reuse_alv_grid_display, SAPLSLVC_FULLSCREEN), SAPGUI, back end, front end
Reason and Prerequisites
The data table that is sent to the front end only allows character values with the length 128.
Solution
This is the standard system behavior and cannot be changed.

How to create and handle sharepoint custom list with more than 300 columns?

Hi,
I have requirement for our project where in the input form is having around 320 columns in it.below are the columns and data types.
Single line of text-180
Yes or No Radio button -95
Date time control-35
Checkbox-10
I have checked the sharepoint boundry and limits for columns and data types.
https://technet.microsoft.com/en-us/library/cc262787.aspx
But how can we handle a sharepoint list with these many large number columns.
Is it safe to create all columns in a single list?
How it will impact the performance?
What is the other approach acheive this requirement?
Any help would be appreciated.
Regards,
Poovi

Hi,
According to your description, my understanding is that you want to know if it has some performance issue and limitation when create large number column in a list.
When creating columns in the list , you can still create all 320 columns in the list. But when retrieve the items in a view, then there is a list view threshold limit which causes the performance issue, see the link below:
Sharepoint list column limit
To handling the large number columns, I suggest you can distinguish the column with business logic to create in different list, it will be clear to display the logic relationship.
Thanks
Best Regards,
Jerry Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

ALV Cell with more than 255 characters.

Hello Guru's,
I need to display a longtext in ALV with other details. I am using READ_TEXT to get the Longtext and appending it to Internal table field, which i have defined as a string. I have debugged the code and it is containing around 450 characters. But, when i am trying to display using "REUSE_ALV_GRID_DISPLAY" it is only displaying 255 characters.
Please suggest a solution.
Thanks,
Sudhir.

Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT

List with more than 1000 elements

I'm trying to use this query:
select *
from street
where street_cod in ('street_code_list')
It working well when the 'street_code_list' has less than 1000 codes but it fails when it have more, with a message that says that a list can't have more than 1000 elements. How can I fix this problem? Can I use any other kind of object to store my list?
I'm querying the database in ColdFusion using ODBC.
Thank you in advance,
Rui

Another thing to consider doing is simply creating a "list table" which would contain your list elements and allow you to do a
SELECT X
FROM Y
WHERE X IN (SELECT X
FROM Z)
type query.
I don't know where you are getting your list from, but if it is persistant (i.e, doesn't change with every program run) this is certainly a viable option (and may be usable even if the list does change every run).
If this is being executed in PL/SQL (or some other procedural language) you could also just loop through your list: execute the query with the first 1000 list elements and do your processing, then the next, and so on. Of course, to some extent this depends on your processing, but if you need the entire result set before you can process it, then you could store the individual result sets in a PL/SQL table or an array (if you are using Pro*C or whatever) and then process when the PL/SQL table/array was fully populated.

How to create a theme with more than one master-slide size defined?

I would like to create a Keynote theme that has more than one size of page defined - for example one for on-screen show, and one for printing.
I noticed that the stock themes, and those from theme vendors, come with multiple page dimensions, and that the master slide layouts for the 'same' master slide appear to be designed differently for the different sizes.
How do I create themes like this in Keynote? I cannot find any information about this in the Keynote manual. I have worked out how to change the master slide dimensions, but not how to tell Keynote that the layout I've created for a slide is for a particular set of dimensions. So when I look at my theme in the theme browser, I only see the dimensions I had selected last time I saved my theme showing.
Any help most appreciated.

The same reason that Apple and 3rd Party vendors put multi-size templates in one file I expect. I am trying to construct an in-house standard template for use in our company, and it is easier to manage if there is only one file to send to people rather than many - both initially and for subsequent edits / updates to the template.
Of course it would be possible to create several templates (one for each size). But since it is clear that templates can be combined, it appears sensible to do this - unless the doing of it is horridly complicated

How to pass a parameter with more than one value to a report? (urgent)

Hi, all
I try to pass a parameter from a search form to a report in
which I would like to print out my search result. My problem is
I can pass the parameter to report but only one value which my
cursor points to. could anyone tell me how to pass a list of
value to the report? my trigger in form like this:
declare
PL_ID PARAMLIST;
sc_no books.c_no%type;
begin
PL_ID := GET_PARAMETER_LIST('parametername');
IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
END IF;
PL_ID := CREATE_PARAMETER_LIST('parametername');
IF ID_NULL(PL_ID) THEN
MESSAGE('PL/SQL held against Button failed to execute');
RAISE FORM_TRIGGER_FAILURE;
END IF;
ADD_PARAMETER(PL_ID, 'PARAMFORM', TEXT_PARAMETER,'NO');
sc_no := :searchlist.c_no; --(c_no is the value I want to pass
but not only one.)
ADD_PARAMETER(PL_ID, 'pamametername', TEXT_PARAMETER, sc_no);
RUN_PRODUCT(REPORTS, 'reportpathname.rep', SYNCHRONOUS, RUNTIME,
FILESYSTEM, PL_ID, NULL);
end;
Thank you in advance
Diana

Is it your values in parameter NO separated by coma? And is it
parameter in where clause?
Do you want something like :
from table
where s_no in (NO) ?
If is answer "yes" you can create lexical parameter in report.
You can write in report sowething like:
select a.field1, a.field2,.....
from table a
&COND /* this is if is condition only one line after "from".
if you have more lien after where then you will put this &COND
in line where you want to have your multivalue.
Then in your trigger in form you should write:
sc_no := 'where a.sc_no in ('||:searchlist.c_no||')';
ADD_PARAMETER(PL_ID, 'pamametername', TEXT_PARAMETER, sc_no);
/* again this is if you have only one line with WHERE ili
conditions */
or you will write:
sc_no := 'and a.sc_no in ('||:searchlist.c_no||')';
ADD_PARAMETER(PL_ID, 'pamametername', TEXT_PARAMETER, sc_no);
It will substitute line in which is your conditions with
multivalue.

How to retrieve unique records with more than one column

I have a table sps_prod as described below -
POGNAME VARCHAR2(1500)
INDEX#VERSION VARCHAR2(200)
POG_MODEL_STATUS VARCHAR2(100)
POG_LAYOUT_TYPE VARCHAR2(500)
POG_MARKET_SPECIFIC VARCHAR2(500)
POG_CONTACT_NUMBER VARCHAR2(100)
AREA_SUPPORTED VARCHAR2(500)
POG_COMMENTS VARCHAR2(1500)
POG_FOOTER_COMMENTS VARCHAR2(1500)
POG_ELECTRICAL_LIST_1 VARCHAR2(1500)
POG_ELECTRICAL_LIST_2 VARCHAR2(1500)
POG_CARPENTRY_1 VARCHAR2(1500)
POG_CARPENTRY_2 VARCHAR2(1500)
INSTALLATION_INSTRUCTION_1 VARCHAR2(1500)
INSTALLATION_INSTRUCTION_2 VARCHAR2(1500)
FIXTURE_REORDER_NUMBER VARCHAR2(200)
FIXTURE_ID VARCHAR2(200)
FIXTURE_NAME VARCHAR2(500)
FIXTURE_IMAGE VARCHAR2(500)
PART_REORDER_NUMBER_9 VARCHAR2(500)
PART_FIXTURE_ID_9 VARCHAR2(500)
PART_FIXTURE_NAME_9 VARCHAR2(500)
PART_FIXTURE_IMAGE_9 VARCHAR2(500)
UPC VARCHAR2(50)
ITEM_NUMBER VARCHAR2(50)
DESCRIPTION VARCHAR2(700)
MERCH_TYPE VARCHAR2(20)
HEIGHT VARCHAR2(100)
WIDTH VARCHAR2(100)
DEPTH VARCHAR2(100)
CREATE_TS DATE
There are 4 millions records in it and many with the same combination of POGName,Index#Version,POG_Model_Status,POG_Layout_Type,POG_Market_Specific, POG_Contact_Number and Fixture_Name. How do I retrive records with all the columns above but with unique fixture_name and reorder_number combination. There are no keys defined on the table.
I guess this is a simple problem but the fact that I am trying to retrieve all the columns is stumbling me.
Thanks in advance.

Hi,
Sanders_2503 wrote:
... There are 4 millions records in it and many with the same combination of POGName,Index#Version,POG_Model_Status,POG_Layout_Type,POG_Market_Specific, POG_Contact_Number and Fixture_Name. How do I retrive records with all the columns above but with unique fixture_name and reorder_number combination. I don't see a column called reorder_number. Do you mean fixture_reorder_number or part_reorder_number_9?
So you want only one row for each distinct combination of fixture_name and some other column (I'll assume that's fixture_reorder_number). Does it matter which row? They won't necessarily have the same values for the other columns.
The query below returns the one with the first pogname (in sort order):
WITH     got_r_num     AS
     SELECT pogname, index#version, pog_model_status, pog_layout_type
     ,     pog_market_specific, pog_contact_number, fixture_name
     ,     ROW_NUMBER () OVER ( PARTITION BY fixture_name
                               ,                    fixture_reorder_number
                         ORDER BY        pogname
                       )         AS r_num
     FROM    sps_prod
SELECT pogname, index#version, pog_model_status, pog_layout_type
,     pog_market_specific, pog_contact_number, fixture_name
FROM     got_r_num
WHERE     r_num     = 1
;If there happens to be a tie (that is, two or more rows with the same fixture_name, fixture_number, and first pogname) then one of the will be chosen arbitrarily.
Instead of "ORDER BY pogname", you can ORDER BY any other columns or expressions, but you must have an analytic ORDER BY clause. You can make it "ORDER BY NULL" if you really want to pcik an arbitrary row.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and also post the results you want from that data (or a couple of examples of acceptable results).
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using.

How to create new user with more than one default folder

hi
A new user created in OCS has only one default folder(Inbox).
I want to create new user with customized default folder.
for example:
a new user has more than one default folder(Inbox,Outbox,Draft,Dustbin...)
And also I want to automaticly enable the functions:
When sending messages, place a copy in Outbox
Keep message drafts in Draft
Move deleted messages to Dustbin
who know that?
thanks

The same reason that Apple and 3rd Party vendors put multi-size templates in one file I expect. I am trying to construct an in-house standard template for use in our company, and it is easier to manage if there is only one file to send to people rather than many - both initially and for subsequent edits / updates to the template.
Of course it would be possible to create several templates (one for each size). But since it is clear that templates can be combined, it appears sensible to do this - unless the doing of it is horridly complicated

How to create Dynamic Table with more than one column?

Hi,
I'm trying to learn Dreamweaver. I'm trying to display 2 units from my database in the same row then I would like go to next row.
By default DW shows single record in each row. Is it possible to display more than one?
Thank you

Of course. You will not name the divs differently, they will all be <div class="RowContainer"> (in the example below) and the reason they will look like
1 2
3 4
5 6
is because they will "stack themselves up". That is, the first will float to the top left, the next will float up next to it. The third will not fit on the top line floating next to two, so it will start a new row. Four will float up next to it, and five will start the new row.
Think of the string of divs (don't put wordspaces between them...) as a continuous ribbon or chain of divs. That is a slightly poor analogy, since the second and third won't be next to each other, as a chain or a ribbon might be. But you should be able to have as many divs as you have records... you define the div in the CSS and in your page markup really only show one div.
Here's a modified example from one of my files:
<div spry:region="ds1" class="...">
<div spry:repeat="ds1" class="RowContainer"> 
    {category} {title} {medium}<br>
     {price} {sold} {date}<br>
     {sold_to_purchase_price}
</div>
</div>
Beth

How to create one master with more than one detail

Hi
I am using jdev 11.1.2.1.0
I want to add more than one detail view object under one master view object in application module
Please solve this asap
Thanks

Hi Frank
I have 5 view objects (Suppose A,B,C,D,E) and I have created view links between them like
A->B
A->C
A->D
A->E
Then I am shuttling views in Application module (In Data model Tab) to create A as master and rest as details.
But it is not creating as i want.
I add new instance of view object independently.
Please solve this
Thanks
Edited by: 7668489779 on ३० अप्रैल, २०१२ ४:०७ अपराह्न

How to set a process with more than 10 item values to be changed?

I am trying to make a "default" button where it resets the Column checkboxes to its original state but I have more than 10 iems and I cant fill them all in the 10 slots that they have. Anyone have any ideas? thanks.
For example I have columns 1-20 and I want something like col 1-5 to be checked and col 6-20 to be unchecked as default.

I tried to use process where i declare the new values i.e. ID=1/true, Name=0/false etc. and still nothing happens, anyone have any suggestions?

How to display ALV list with more than 1 structure?

Similar Messages

Maybe you are looking for