How to display diferent Title by using diferent TC in one Report

Hi all,
Ich have a problem by Implementation:
So my Report must be calling from 2 Transactions
Transaction 1 call Report 1 --> show title 1 (exp. Windows was called by Transaction 1) (start window - Dynpro screen 1000)
Transaction 2 call Report 1 --> show title 2 (exp. Report 1 was called by Transaction 2) (start window - Dynpro screen 1000)
I used SET TITLEBAR but isn't work
How can I do that? Can I user sy-tcode for the changing report-title?
Thanks for Answer!

Hi,
the following code I have used to change report title for selection screen of the 2nd transaction:
initialization.
                                                                                if sy-tcode               ne 'ZTGIODOK'.
       sy-title                  = text-shd.
     endif.
This is only for the selection screen. For the result screen SET TITLEBAR should work.
Regards,
Klaus

Similar Messages

How to display all the surveys using content query web part

Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
however, it returned nothing. Did I miss anything?

Hi,
OOTB Survey List does not contain any
Content Types and it has the following structure:
Response entry is represented by
List Item
Response entry consist of questions and answers, where Question correspond to
Field and Answer to Item value respectively.
For querying Survey List via CQWP the following properties could be used
BaseType
<Lists BaseType="4">
ServerTemplate
<Lists ServerTemplate="102">
Example
To retrieve all the responses from Survey lists, specify List Type property as shown on picture
Reference:
http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to display smartforms table lines useing different background colour

Hi all:
How to display smartforms table lines useing different background colour .
for example:
line1:green
line2:red
line3:green
line4:red
line5:green
line6:red
line7:green
line8:red
Any help is highly appreciated!!
启明星

Hi,
Create a two lines one for header and second for data in the table.
1)In table painter we can find the pencil mark.
2)select the pencil mark
3)now select the line which you need to shade
4) now select the shading colour in the table painter and the provide the resolution up to 100% and select table pattrn for that line.
5) Now you can use this for the header now only the header gets shaded and the remaining gets unshaded.
reward points if useful
Thanks and Regards,
Nishant

How to display another window by using Check box

Hi Friends,
I have one doubt in Webdynpro with java. How to display another window by using Check box?
For Exam My requirement is I am getting BAPI from ECC System. So I have to go given input details in first view and output details in Second View. So in Second View I will taken Table that data will displayed in rows. each and every row first check box is available.
Here Select Check Box of particular row then click Edit button. That row data will be displayed in one popup window.
empid, name, sal ,firstname, last Name
empid, name, sal ,firstname, last Name
empid, name, sal ,firstname, last Name
Suppose I have to select check box in First Row Click on EDIT button That row data will be displayed in another popup window here customer will change details depending up requirement click on SAVE Button that update data will saved in ECC System.
How to display another window by using Check box?
Regards
Vijay

Hi Vijay
Your question is not clear enough to give an answer. Do you have some difficulties with the code for opening a popup-window? There are many-many examples in the forum how to open/close a popup.
Or you do not know how to bind the popup opening with clicking a check box? Just put the code in the onSelect event handler of the check box.
BR, Siarhei
Edited by: Siarhei Pisarenka on Mar 11, 2010 10:55 AM

How to display items from database using catagorylookupdroplet

Hi everyone,
i want to know how to display items from database using catagorylookup droplet. if anybody have any code snippet please share it.
Thanks in advance,

<dsp:droplet name=".................../CategoryLookup">
     <dsp:param name="id" param="itemId"/>
     <dsp:oparam name="output">
          <dsp:valueof param="element.displayName"/>
               <%-- This is show the Child Category --%>
               <dsp:droplet name="......................./ForEach">
               <dsp:param name="array" param="element.childCategories"/>
               <dsp:oparam name="outputStart">Child Categories</dsp:oparam>
               <dsp:oparam name="output">
                    <dsp:a href="">//bydefault it will take its own file's name
                         <dsp:param name="itemId" param="element.repositoryId"/>                                                                                          <dsp:valueof param="element.displayName"/>
                    </dsp:a>
               </dsp:oparam>
               </dsp:droplet>
               <%-- This is show the Child Product --%>
               <dsp:droplet name=".............../ForEach">
                    <dsp:param name="array" param="element.childProducts"/>
                    <dsp:oparam name="outputStart">Child Products</dsp:oparam>
                              <dsp:oparam name="output">
                                   <dsp:droplet name="................/ProductLookup">
                                        <dsp:param name="id" param="itemId"/>
                                        <dsp:param name="elementName" value="Prod"/>
                                        <dsp:oparam name="output">
                                             <dsp:getvalueof id="img102" param="Prod.smallImage.url" idtype="java.lang.String">
                                                  <dsp:img height="250" width="250" src="<%=img102%>"/>
                                             </dsp:getvalueof>
                                        </dsp:oparam>
                                   </dsp:droplet>
                                   <dsp:a href="productView.jsp">
                                        <dsp:param name="itemId" param="element.repositoryId"/>
                                        <dsp:valueof param="element.displayName"/>
                                   </dsp:a>
Hope this helps.
-RMishra

How to display properties of dimension on the input form and report in bpc

Dear Expert,
Please tell me how to display properties of dimension on the input form and report in bpc. I can only display dimension number.
thanks so much
hungth

Hi Hungh,
If your are using BPC 10 with EPM add in client, you can use the function:
EPMDimensionProperty ()
This function retrieves the properties of a specified dimension in a specified cell range.
Thanks, Safa

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

How to display Spool title in custom format.

Hi
When SForm goes to Spool by default it display the title based on <PrinterName> <Report> <UserName>, i need a solution where i can customize the title before it goes to spool. So that i can make difference this spool with others while compare to titles. Well i tried with FM GET_PRINT_PARAMETERS, but not sure how far it can help in my case.
Please let me know the possible ways.
Thanx.

Hi,
The associated function module for the smart form contains an import paramter called OUTPUT_OPTIONS.
OUTPUT_OPTIONS-TDDATASET : Spool request: Name
OUTPUT_OPTIONS-TDSUFFIX1 : Spool request: Suffix 1
OUTPUT_OPTIONS-TDSUFFIX2 : Spool request: Suffix 2
Just assign the value to the structure field OUTPUT_OPTIONS-TDDATASET .
Thanks,
Ramakrishna

How to display PDF in JSP using Iframe

Hi All,
I am using Struts 2. I am building my file in ActionClass with seperate Method like getGeneratedPDF() in which, I am setting header of response and writing into PDF.
This method will be called from JSP by this way
s:property value="getGeneratedPDF()" />
But It displayed Junk Characters , and this PDF is not static (already Generated). It is generated and build on Fly.
I have 2 questions 1 -- How to display PDF in JSP in proper way without Junk Character in it?
questions 2 -- How to display it in Iframe?
Please help me , If you know the solution.
Thanks in Advance,
Jimmy

jamy_26 wrote:
But It displayed Junk Characters , and this PDF is not static (already Generated). It is generated and build on Fly.A PDF file is a binary file, not a text file, and you're trying to display it as String. Of course you would get "junk characters". Have you ever tried opening a binary file (pdf, doc, jpg, xls, etc) using a text editor like Notepad?
I have 2 questions 1 -- How to display PDF in JSP in proper way without Junk Character in it?Display it as binary stream, not as text stream. You can display it standalone, just let the link/form/addressbar URL point to some Servlet which writes the InputStream of the PDF file to the OutputStream of the response, along with a correct set of response headers (at least content-type, content-disposition and content-length), so that the browser can open it in the correct application (which is usually Acrobat Reader). If you want to embed the PDF file in a JSP, then one of the ways is indeed using the HTML <iframe> tag.
questions 2 -- How to display it in Iframe? Just let the iframe URL point to the aforementioned Servlet.
You can find here an example of a generic file servlet, you may find it useful to get the idea how to do it: [http://balusc.blogspot.com/2007/07/fileservlet.html].

How to display image in database using php

i've try search all hope that you all can give me some guidance how to display data that is in image or BLOB using PHP. just a query and php code that will make display of the image. hope that you all show me the example or give me reference that i need to solve my problem.

Hi,
Have a check on these Google results, you might find something there...
http://www.google.com/search?sourceid=navclient-ff&ie=UTF-8&q=%22display%20image%22%2Boracle%20%2Bphp

How to display header title for 0MATERIAL texts in the query output?

Dear Bwers,
I have a requirement where i need to display headers titles for 0MATERIAL texts in the query output. (example "Material description"). Any ideas on how to do this?
Thanks
Raj

Kamal,
Its is as below:
<b>Vendor</b>    <b>Vendor Name</b>
1001 ---            Bright Industries
1002 ---            Glow Industries
I want to display the header title "Vendor Name" as the title in the column instead of displaying the text without any header title.
Thanks
Raj
Message was edited by:
        Raj Singh
Message was edited by:
        Raj Singh

How can display svg file by using applet

Hi ,
my problem is ..
1. I have one servlet which is generating svg file by using batik package.
2.There is one Applet which receives SVG file from Servlet ..
From here i dont have dont doubts.. then my doubt is
3. How can display that svg file on the browser..
please help me if u know any ,
thanks regards,
Balu

Maybe this page can help you?
http://www.w3c.org/Graphics/SVG/

How to display Contribution Folder Name using Idoc Script

Hi, could ypu please tell me how can we display Contribution Folder name using Idoc script by passing dCollectionID. Appreciate your help on this. Thank you
Regards,
Ashok

You should be able to get it directly as dCollectionName, but might have to execute a query to fill in the result set first: select dCollectionName from COLLECTIONS where DCOLLECTIONID = ?

How to display xml to html using xsl?

hi all...may i know how to display xml to html page?
i ve included <xsl:output method="html" indent="yes" /> inside my xsl file. i clicked on output.xml file and everything is displayed correctly but the format is xml instead of html. is there anyway to transform it to html?
below are my xsl and xml codes:
// xsl file
<?xml version='1.0'?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="html" indent="yes" />
<xsl:template match="/">
<html>
<body>
<h2>Document Contents</h2>
<table border="1">
<tr bgcolor="#9acd32">
     <th align="center">Document Name</th>
     <th align="center">Document ID</th>
     <th align="center">Owner</th>
</tr>
<xsl:for-each select="Document/Contents">
<tr>
<td><xsl:value-of select="DocumentName"/></td>
<td><xsl:value-of select="DocumentID"/></td>
<td><xsl:value-of select="Originator"/></td>
</tr>
</xsl:for-each>
</table>
</body>
</html>
// xml file
<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="xsltStyleSheet.xsl"?>
<Document>
     <Contents>
          <DocumentName>register</DocumentName>
          <DocumentID>1</DocumentID>
          <Originator>hhh</Originator>
     </Contents>
</Document>
</xsl:template></xsl:stylesheet>

your XSL transforms to HTML (in fact XHTML): what more do you expect? did you expected anything different from the following output? if yes: what and why?
<html>
     <body>
          <h2>Document Contents</h2>
          <table border="1">
               <tr bgcolor="#9acd32">
                    <th align="center">Document Name</th>
                    <th align="center">Document ID</th>
                    <th align="center">Owner</th>
               </tr>
               <tr>
                    <td>register</td>
                    <td>1</td>
                    <td>hhh</td>
               </tr>
          </table>
     </body>
</html>

How to display table data without using ALV and table element.

Hi,
        Its possible to display table data without using ALV and table element.
       Every time i am fetching data based on (customer,status) fields and displaying these data in my output using alv
       (every time i am fetching single row data ),
       But problem is alv occupying more space in the output , i want to display data part only i dont want field names,
       settings and header data etc..things.
      Give solution to display data part..
Regards,
Rakhi.

Hi,
Does you mean that you need ALV without default Function Toolbar...? If this is the case, the easy solution would have been to use Table Element rather. But, if you need to use ALV only without Function Toolbar, you can do away with that as well.
In that case, after calling GET_MODEL, you need to add few more lines of codes to achieve your goal. Those lines are --
DATA LV_VALUE TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
    LV_VALUE = LO_INTERFACECONTROLLER->GET_MODEL(
* Standard Filter Function setting to FALSE
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_SORT_COMPLEX_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_FILTER_COMPLEX_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_FILTER_FILTERLINE_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_DISPLAY_SETTINGS_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_VIEW_LIST_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_SORT_HEADERCLICK_ALLOWED( ABAP_FALSE ).
    LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_HIERARCHY_ALLOWED( ABAP_FALSE ).
* Standard Filter Function setting to FALSE Ends
Here as you can easily notice that LV_VALUE is instantiated on CL_SALV_WD_CONFIG_TABLE. Now, using this LV_VALUE, you set standard functions as False to dis-allow their display.
Hope this answers your query.
Thanks.
Kumar Saurav.

How to display more than 10 rows in an Auto Updating Report

I followed Carl Backstorm's example, http://htmldb.oracle.com/pls/otn/f?p=11933:40:525653462286833::NO:RP:: to create a page with an auto update report/region. It's working fine (thanks, Carl) but I can't have the report display all rows (38 rows in total). Everytime I press the "Manual Refresh" button, it shows 10 (the first 10) rows only.
When the report displays at the first time, it shows all the rows (38 rows). Number of Rows and Maximum Row Count are set to 999999 and "No Pagination Selected" in the report region. But after I press the "Manual Refresh" button or specifiy an update time value (like 1 second) to have it auto update, then it only display the first 10 rows.
Is there a way to display more than 10 rows in an Auto Updating Report using Carl's example auto update report/page? Anyone can help? Thank you.
-Michele
Edited by: 106451 on Jun 30, 2010 10:12 AM

Yes, I changed it to:
function table_object(pId){
     this.id = pId;
     this.start_record = 1;          //optional
     this.num_record = 50; //optional
     this.num_record2 = 50;          //optional
I don't quite understand how these vaiables are used for though. Thanks.

How to display diferent Title by using diferent TC in one Report

Similar Messages

Maybe you are looking for