How to Display Heirarchy and Character at a time in the report...

Hi
I have a req ...where I need to design a query to display a character and its heirarchy colum by colum...I mean, I have document type master data info object it has texts and Heirarchy data source...and we loaded this data...Also we have document type directly coming from ECC Transactional DS...Now When I take this document type and do not select heirarchy its displaying the document types (KN,KA ,KR etc...)..If I select the heirachy in my query..its displaying in heirarchy structure and the document types (KN,KA,KR ) are displaying as the last nodes. But I want to display the heirarchy and also the document type in 2 diff colums... how it would be possible..is there any thing needs to be done at query level / do i need to take a RKF / CKF and write any code to bring heir and info object value?
Iam bit confused here..pelase advice ASAP.
regards

you cannot have the same character in the query twice. You can either have it in the hier format or just the char.
I am wondering why you need to display the same characters twice in each column.
The best way is to have them in the hier. format and in the char. properties expand the node level as you want so you will see them in the detail level.
assign points if helpful

Similar Messages

How to display CPU and memory utilization from ST06 in a report

Hi,
I want to display CPU Utilization and Memory utilization and File sys details from ST06 transaction in a report.
Is there any function module or any other method to do that.
Please advice.
Thanks,
Sandeep.

Hi Ranganath,
Thanks for your time.
And thank you very much for the reply.
Both the function modules are helpful.
But can u also help me in getting the data of FileSys from ST06.
Thankyou,
Sandeep.

How to display first SPACE character in Column of ALV Grid Report?

Hello All,
In ALV Grid report, One of the column has a value like ' Test_Value'. In this value first character is SPACE but in display SPACE is not appearing.
Field catalog type is:- slis_t_fieldcat_alv
I have used the function module:- REUSE_ALV_GRID_DISPLAY
Is there any settings required in Fieldcatalog Internal table for displaying leading SPACE chara.?
its a field not the header.
thanks in advance.
Rahul

Hi all,
did any body have a solution for this problem?
In ALV Grid report, One of the column has a value like ' Test_Value'. In this value first character is SPACE but in display SPACE is not appearing.
Field catalog type is:- slis_t_fieldcat_alv
I have used the function module:- REUSE_ALV_GRID_DISPLAY
Is there any settings required in Fieldcatalog Internal table for displaying leading SPACE chara.?
its a field not the header.
thanks in advance.
Rahul

How do I display font one character at a time?

Right now the way I present my font is it all appears
instanenous. I don't know if this is even possible or not, but I
would like to find a way to have the font be displayed one
character at a time over the course of a variable amount of
seconds. For example, some of you might recognize this font
presentation from the game "Phoenix Wright" for the Nintendo DS:
Click
here
for example.
That is the font effect I'm trying to capture - where the
font is presented in a character by character fashion. Now
obviously I could achieve this by putting a new letter on every
frame, but let's be realistic - that's not the logical way to do
it. Does anyone know the code/options involved in making this font
display stylization logically possible? Bonus points if you know
how to make the characters mouths move with the sychronized font
and then stop once the text stops =).

Place a dynamic textfield on your stage and label it myText.
In frame one place the following code,to increase the write
speed lower the value of 100 in the setinterval call:
myText.text="";
var dText="My text I want to display";
var dTmr=setInterval(ShowNextChar,100,0);
var cPos=0;
stop();
function ShowNextChar()
myText.text=myText.text+dText.substr(cPos,1);
cPos++;
if (cPos==dText.length) clearInterval(dTmr);
}

How to display a particular character of a word

Hi,
can anyone tell me how to display a particular character of a word in smart forms,Ex:suppose word is India and i want to display character d..
Thanks in advance.
Rajesh

please look at the below explanation:
DATA: VAR TYPE CHAR20.
VAR = 'INDIA'.
WRITE:/ VAR(3) - THIS WILL PRINT FIRST THREE CHARACTERS OF THE INDIA SO THE OUTPUT WILL BE : IND
WRITE:/ VAR+3(1) = THIS WILL PRINT 1ST CHARACTER AFTER FIRST 3 CHARACTERS SO THE OUTPUT WILL BE : I
COPY REQUIRED CHARACTERS IN ANOTHER VARIABLE.
DATA: VAR2 TYPE CHAR10.
VAR2 = VAR+3(2) .

How to display a unicode character in a list ?

Hi,
sorry if the question seem to be really easy but I doenbt found of to diaply a special character in a list.
I thank that it was easy :
1) display tha windows character map
2) copy paste the charatcter in the ABAP Program to obtain something like this :
write '≤'.
But the displayed character is '#' . So, could you tell me how to display a gived unicode character ?
Regards,
morgan

Hello Morgan,
you need SAP system with unicode. You can check it from every dynpro/mode:
System->Status: SAP System dada Unicode system: yes
I have checked your sign '≤' on my not UC system: is displayed: '='.
Bye,
Peter

How to display date and time on jsf page

Hi,
how to display date and time on jsf page
we are using 11.2.0.0 jdeveloper on windows.
thanks
Edited by: user12187801 on 26-Jul-2012 01:42

Your question is certainly lacking some information.
If you want a constantly updating date/time - then JavaScript is your best bet, and Google would find you examples like [url http://www.webestools.com/scripts_tutorials-code-source-7-display-date-and-time-in-javascript-real-time-clock-javascript-date-time.html]this
If you meant something else, then it's back to you to explain.

How to display images and information

how to display images and information(e.g. like questions) on a jsp page that stored in a database

Look As far as i can see....
Utlimately every file could be expressed as a bytes buffer.
so say if you have a bean called Choice Bean which is expressed as
public class ChoiceBean{
   private String choiceid;
   private String choicedesc;
   private byte image[];
   public void setChoiceId(String choiceid){
          this.choiceid = choiceid;
    public String getChoiceId(){
           return this.choiceid;
      public void setChoiceDesc(String choicedesc){
           this.choicedesc = choicedesc;
       public String getChoiceDesc(){
           return this.choicedesc;
       public void setImage(byte image[]){
              this.image = image;
         public byte[] getImage(){
              return this.image;
}QuestionList.java:
===============
public class QuestionList{
     private List<ChoiceBean> choicelist;
      /*Other member variable declarations*/
       public List<ChoiceBean> getChoiceList(){
                /*Custom code where you may build the list by querying the DA layer*/
                 return this.choicelist;
     public int search(String choiceid){
             int index = -1;
             for(int i =0 ; i < this.choicelist.size() ; i++){
                    ChoiceBean cb = this.choicelist.get(i);
                     if(cb.getChoiceId().equals(choiceid)){
                            index = i;
                            break;
             return index;
    /* Other member method declarations */
}and you are retreving List<ChoiceBean> from DB using your query & have created a session attribute / <jsp:useBean> named ChoiceList
NOTE: sometimes your application server can go out of bounds as you are consuming a lot of memory by creating an arraylist object.
use the following methodology to display images & choices
sample.jsp:
=========
<jsp:useBean id="QuestionList" class="com.qpa.dao.QuestionList" scope="session"/>
<TABLE>
<%
/* QuestionList.getChoiceList() is a method which fetches data from the DB & returns it in form of List<ChoiceBean> */
List<ChoiceBean> choicelist = QuestionList.getChoiceList();
for(int i =0 ; i < choicelist.size() ; i++){
%>
<TR>
<TD><%!=choicelist.get(i).getChoiceId()%></TD>

<TD><IMAGE src="ImageServlet?choiceid=<%!=choicelist.get(i).getChoiceId()%>"/> </TD>
<TD><%!=choicelist.get(i).getChoiceDesc()%></TD>
</TR>
<%
%>
</TABLE>
<%
    session.remove("QuestionList");
%>
NOTE: usage of JSTL or any other custom built tag-libraries makes life more simpler in the following case
ImageServlet.java:
===============
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
        byte buffer[] = null;
        HttpSession session = request.getSession(false);
        /*getting the QuestionList from the session*/
        QuestionList ql = null;
        String choiceid = new String("");
        try{
             choiceid = request.getParameter("choiceid");
             /*getting the QuestionList from the session*/
            ql = (QuestionList) session.getAttribute("QuestionList");
        } catch(Exception exp){
        if(choiceid.equals("") == false && ql != null ){
            List<ChoiceBean> clist = QuestionList.getChoiceList();
               assuming that you have created a serach method which searches the entire choice list and would give you
               the index of that object which is being refered by unique choiceid and returns -1 if not found
            int index = QuestionList.search(choiceid);
            if(index != -1){
               ChoiceBean cb = clist.get(index);
               buffer = cb.getImage();
        if(buffer != null){
             // assuming that we have stored images in JPEG format only
             JPEGImageDecoder decoder = JPEGCodec.createJPEGDecoder(new ByteArrayInputStream(buffer));
             BufferedImage image =decoder.decodeAsBufferedImage();
             response.setContentType("image/jpeg");
             // Send back image
             ServletOutputStream sos = response.getOutputStream();
             JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(sos);
             encoder.encode(image);
        } else {
           response.setContentType("text/html");
           response.getWriter().println("<b>Image data not found</b>");
}However,i still feel there are few loopholes with this approach where Application Server can eat up a lot of heap space which may result in outofmemorybound exception.
Hope this might help :)
REGARDS,
RaHuL

Hi Everyone, I am using iPhone5, my question in how to display name and contact number both stored for incoming and outgoing calls? If I have saved five different numbers with a same name, how do I recognise that from which number caller is calling?

Hi Everyone, I am using iPhone5, my question in how to display name and contact number both stored for incoming and outgoing calls? If I have saved five different numbers with a same name, how do I recognise that from which number caller is calling?

I have friends all over Europe, does it matter what number they use to call me? Nope! All incoming calls are free for me.
The only time you ever have to worry about which number is if you get charged for incoming domestic/international calls.
You can tag their number (work/home/iphone) and that may show on the CallerID accordingly.
It should show, John Doe
underneath, work/home/mobile
For example:
http://shawnblanc.net/images/img-0009-1.png

How to display Lines and Boxes in SAP Script

hi,
Can any one help me how to display Lines and Boxes in SAP Script.
Regards
kiran

The SAP printer drivers based on page-oriented printers use these commands when creating output whereas the line printers and non-supported page-oriented printers ignore these commands.
Syntax:/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
This command draws a box of the specified size at the specified position.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH determines the width of the box.
Default: WIDTH value of the SIZE command.
HEIGHT determines height of the box.
Default: HEIGHT value of the SIZE command.
FRAME determines the thickness of frame.
Default: 0 (no frame).
INTENSITY determines the box contents as a grayscale percentage.
Default: 100 (full black)
The other details I guess is provided by friends who have posted before me.
Regards,
K.Sibi

How do I get the arrow keys to move one character at a time in the address bar or search box?

I can no longer get the arrow keys to advance or retard "one character at a time" in the address bar, the search box, or on any form in Firefox. This feature works in other browsers without a problem. The "Home" and "End" keys do not work either. How do I fix this behavior?

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

How can I login and retrieve my user file from the trash?

I was trying to find out where all my HD had gone, which a did using ‘What Size’.
I found what looked like an old backup file so I put the file in the trash.
It turns out that the file was my user file. So now I can’t login to as the user.
How can I login and retrieve my user file from the trash?

The Digital Editions forum is here, in case this is what you are talking about:
http://forums.adobe.com/community/adobe_digital_editions
If you are not, I apologize for the misunderstanding.

I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

dglenn9000 wrote:
I created a new user account just to see if it was my user Library or if there was something wrong with my system. And the new user account is doing most of the same things so I will need to do a full restore anyway.
Not necessarily. I'd suggest downloading and installing the "combo" update. That's a combination (thus the clever name) of all the updates to Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

How to remove bullets and spacing for url links in the Related Links iview?

I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor".
All I need is to remove the bullets and increase some vertical spacing between the links.
Currently, it looks like this:
URL iView A
URL Iview B
I go through the whole section of Related Links properties, none of them seems to do what I want.
Here are the list of properties in Related Link section (of Navigation Panel):
Link Color
Text Decoration of Link
Hover Color
Text Decoration of Hovered Link
Initially, I thought "Text Decoration of Link" should be the right property I should look at. But there are a drop-down with 5 options: None, Underline, Blinking, Overline and Line-Through, which really can't achieve what I want.
Thanks for advice.
Kent
Post with Diagram Illustration:
<a href="http://sapnetweaverforum.blogspot.com/2006/11/how-to-remove-bullets-and-spacing-for.html">How to remove bullets and spacing for url links in the Related Links iview?</a>
Message was edited by: Kent C.

Hi, Kai.
I checked the Related iView properties (URL Template), I don't see what layoutset it is really using. I am not sure, is that a layout set apply to the Related Link Iview?
For the regular KM iView, I will see what Layout Set I want to apply, then I can go and change the properties (of layout coontroller, collection renderer & resource renderer)you mentioned. But for this Related Link iView, I really don't know. I guess it may be in the code itself.
If there is a layout set for Related Link iView (or the place to apply layout set to it), can you point to me which one is that? (I did a search through the layout set names, I only find the AppQuicklinkExplorer (I used this for Dynamic Nav. Link iView before), if I can aply this layout set to Related Link iView, my problem will be solved.)
Thanks for help.
Kent

Hello! how can i put and read my words documents in the notes pad of my ipod nano 3trd generation?thanks to all.the notes

hello! how can i put and read my words documents in the notes pad of my ipod nano 3trd generation?thanks to all.

The Notes features of the 3G iPod Nano only supports TXT files and not Word Documents. If you want to be able to read these word documents, you'll need to copy the text from each over to a text file. See here for more information.
iPod: Storing and reading notes
Keep in mind that each txt file has a limit of 4096 characters. See this article for more information as well.
Long notes are truncated on your iPod
B-rock

How to Display Heirarchy and Character at a time in the report...

Similar Messages

Maybe you are looking for