How to Display Hierarchy of depending database tables (Key Comparison)

Hi there,
is there a transaction available to display the hierarchy of depending database tables? Like:
TABLE A -> Key: XYZ
- TABLE B -> Key: XYZ
It's kinda ment to display the technical datamodel of an application.
Thanks. Greetings. Kay.

it doesn't exist, but you have the graphical display of tables related by foreign keys and check tables (SE11, shiftctrlF11), and there are the logical databases to help you.

Similar Messages

How to send changes in the Database Table Periodically using Change Pointe

Hi,
How to send changes in the Database Table to the external system Periodically using Change Pointers.
Thanks & Regards,
Gopi.

That depends on what table you are referring to.

How to display records into a non table base block..

Hi,
Can anybody help me how to display records into a non table base block....
Find below is my coding but it only display the last record in the first line
in the block.
PROCEDURE CREATE_CARTON_QUESTION IS
CURSOR car_c IS
select /*+ rule */ question_id, question_description
from WHOP.QADB_QUESTIONS
where question_category = 'Carton'
and question_active_flag = 'Y';
v_found VARCHAR2(10);
v_status boolean;
v_error      varchar2(150);
v_count number;
car_r car_c%rowtype;
begin
begin
select count(*) into v_count
from WHOP.QADB_QUESTIONS
where question_category = 'Carton'
and question_active_flag = 'Y';
     exception
     when no_data_found then
     v_count := 0;
end;
if v_count > 0 then
for car_r in car_c loop
---populating carton questions
:la_carton.carton_question_id     := car_r.question_id;
:la_carton.carton_question_answer     := 'N';
:la_carton.carton_error_details     := null;
:la_carton.attribute2          := car_r.question_description;
end loop;
end if;
end;
Thanks in advance.
Regards,
Jun

Hi SNatapov,
Thanks for you reply but still I get this error...
FRM-40737 Illegal restricted procedure GO_BLOCK in WHEN-VALIDATE-ITEM trigger.
Please note that I call that program unit in the last field of my control block inside when-validate-item trigger the questions should be display in la_carton block which is my non-base table block.
Find below is the code....
begin
go_block('la_carton');
first_record;
for car_r in car_c loop
---populating carton questions
:la_carton.carton_question_id := car_r.question_id;
:la_carton.carton_question_answer := 'N';
:la_carton.carton_error_details := null;
:la_carton.attribute2 := car_r.question_description;
next_record;
end loop;
end;
Hoping you can help me this problem...
Thanks in advance.
Regards,
Jun

How to configure ActiveSync for a database table in IdM 7.0

Hi All,
Please suggest me the steps to configure ActiveSync in IdM 7.0.
when i try it by resource-->activeSync wizard it gives
"The ActiveSync Wizard has been deprecated in Identity Manager 7.0 in favor of using MetaView and the resource action "Edit Synchronization Policy". "
how to configure ActiveSync for a database table.
Thanx
Shant

Hi,
You need to a script and run it on os level. Here is an example:-
emcli relocate_targets -src_agent=agentmachine1.domain:3872
-dest_agent=agentmachine2.domain:3872 -target_name=RACDB
-target_type=oracle_database -copy_from_src -force=yes
-changed_param=MachineName:agentmachine2.domain
Regards
Jomon
Edited by: JohnJomon on Nov 17, 2011 2:27 PM

How to display the data from database(MS access) to a textbox

anyone know ?

how to display the data from database(MS access) to a
textboxThe reply hasn't changed over these years. Read the tuutorial on how to fetch the data. You can display it anywhere you feel like. :)
http://java.sun.com/docs/books/tutorial/jdbc/

How to store an image into database table

Hi
Can anyone tell me the way, how to store an image into database table.

Hello,
May be this thread will help you in your requirement.
[FM for uploading Image to SAP;
Thanks,
Jayant

How to insert data in to database table depends on Indicator

Hi All,
I am working on Idoc to JDBC scenario. I am collecting & bundling(Using BPM) all the idocs and inserting the data in to the different database tables. Up to now my scenario is working fine. Now the problem is before inserting the data I have to check one of the Table field. If the field indicator is u201CYESu201D then only I have to insert data otherwise I have to wait up to the indicator field needs to be changed. Once indicator is u201CYESu201D then I have to insert all the collected idocs in to the database tables.
Can you please let me know how can I achieve this?
Thanks & Regards,
Purushotham

Hi,
There are two ways you can achieve this.
1. Instead of directly calling SQL statements write a stored procedure on database which will have first select query and then based on its result fire the insert query.For processing any logic like this stored procedure is the best approach. You can call SP from your jdbc receiver channel
2. By using a BPM. In this case you have to first fire a select query in the database and based on the response from database, fire the insert statement from bpm only. basically you will be having 2 send steps to database. One with Select statement and another with insert statement. You need to handle your logic in BPOM in this case.
Hope this answers your question.
Thanks
Amit

How to display multiple data from different table in one table? please help

Hi
I got sun java studio creator 2(the separate installation not the one in the net beans)....
My question is about displaying data that have been taken from the database.... I know how to display data in a table(just click on the table "bind data" )... but my question is that:
when i want to use a sql statement that taken the data from different table...
how can i display that data in the table(that will be shown in the web) ??? when i click bind data on the table i can only select one table i can't select more than one....
Note:
1) i'm using the rowset for displaying the data in the table, since the sql statement is depending on a condition(i.e. select a from b where c= ? )...
2) i mean by different table is that( i.e. select a from table1,table2 )..
thanks in advance...

Hi,
937440 wrote:
Hi every one, this is my first post in this portal. Welcome to the forum!
Be sure to read the forum FAQ {message:id=9360002}
I want display the details of emp table.. for that I am using this SQL statement.
select * from emp where mgr=nvl(:mgr,mgr);
when I give the input as 7698 it is displaying the corresponding records... and also when I won't give any input then it is displaying all the records except the mgr with null values.
1)I want to display all the records when I won't give any input including nulls
2)I want to display all the records who's mgr is null
Is there any way to incorporate to include all these in a single query..It's a little unclear what you're asking.
The following query always includes rows where mgr is NULL, and when the bind variable :mgr is NULL, it displays all rows:
SELECT *
FROM     emp
WHERE     LNNVL (mgr != :mgr)
;That is, when :mgr = 7698, it displays 6 rows, and when :mgr is NULL it displays 14 rows (assuming you're using the Oracle-supplied scott.emp table).
The following query includes rows where mgr is NULL only when the bind variable :mgr is NULL, in which case it displays all rows:
SELECT     *
FROM     emp
WHERE     :mgr     = mgr
OR      :mgr      IS NULL
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL it displays 14 rows.
The following query includes rows where mgr is NULL only when the bind variab;e :mgr is NULL, in which case it displays only the rows where mgr is NULL. That is, it treats NULL as a value:
SELECT     *
FROM     emp
WHERE     DECODE ( mgr
            , :mgr, 'OK'
            )     = 'OK'
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL, it displays 1 row.

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

Loading standard R/3 Hierarchy in BO Database Table using Data Services

Hello,
i'm trying to load Cost Center Hierarchy from R/3 to BO database table using SAP BO Dataservices 4.0
i have replicated the Data Flow and Abap Data Flow explained in SAP documentatio (SAP BusinessObjects Data Services 4-0 SP1 Supplement for SAP) and http://wiki.sdn.sap.com/wiki/display/BOBJ/ReadingR3Hierarchies
but it doesn't work
i get errors like:
[Merge:Merge]
Length <64> for Tran Merge input ABAP_DF_Hierarchy_Leaf_Values column <PARENT_DESC> does not match the length <30> of Tran Merge input ABAP_DF_Hierarchy_Extraction column <PARENT_ID>. The matching columns of Merge transform must have the same data type length. (BODI-1111062)
[Merge:Merge]
Length <30> for Tran Merge input ABAP_DF_Hierarchy_Extraction column <PARENT_ID> does not match the length <64> of Transform Merge output column <PARENT_DESC>. The matching columns of Merge transform must have the same data type length. (BODI-1111062)
thanks for your support
Bilal

It appears that the structures of the two Data Transports going into the Merge Transform don't have the columns in the same order. One of the Data Transports has PARENT_DESC listed before PARENT_ID and the other Data Transport has PARENT_ID before PARENT_DESC.
Basically, you need to change the order of the columns in one of the Data Transports so that it structurally matches the other Data Transport that it's being merged (UNIONed) with.

How to transfer log files into Database Table.

Hello,
I have a requirement. My Front end is Oracle Application. If any user deletes the data from front end screen. One log file should be generated. That file will save in one folder in my server. And That log file consists which code is deleted.
And the user name who deleted the code, time and deleting status..
Now my requirement is i have to develop a report to display the log file data. But i dont have a database table to retrieve the data. The data consists Log files.
How to transfer the Log files in DB table.
I need a data in DB table to develop a report.
Thanks...

How do I ask a question on the forums?
SQL and PL/SQL FAQ
is application 3-tier

How to get multiple rows from database table?

hello !
I need to get multiple rows from a OLEDB database table and display them on a table object.
I did "Wrap in subfrom" on the table, set subform of the table to "flowed", and checked "Repeat row for each data item" of Row1 of the table.
But I can get only one row on the table object.
I need your help.
Thanks

Hi,
best practices when deleting multiple rows is to do this on the business service, not the view layer for performance reasons. When you selected the rows to delete and press submit, then in a managed bean you access thetable instance (put a reference to a managed bean from the table "binding" property") and call getSeletedRowKeys. In JDeveloper 11g, ADF Faces returns the RowKeySet as a Set of List, where each list conatins the server side row key (e.g. oracle.jbo.Key) if you use ADF BC. Then you create a List (ArrayList) with this keys in it and call a method exposed on the business service (through a method activity in ADF) and pass the list as an argument. On the server side you then access the View Object that holds the data and find the row to delte by the keys in the list
Example 134 here: http://blogs.oracle.com/smuenchadf/examples/#134 provides you with the code
Frank

How to input data in a database table without knowing in advance table and column configurations

Hi,
I have a problem using LabVIEW for input data (manually) in a SQL database. I have about 40 tables in the database, each of them is related to a specific engine component. I need to create a user interface (maybe visualizing the table with a table control) where the users can insert data in the database table fields. Could someone give me some suggestion on how to do it?
Using the DB tools insert data.vi I need to know in advance the column configuration of the table, but in my database each table has its own structure! So do I have to create 40 different masks, one for every different table?
Thanks in advance.
Michela

I have not actually used the LV SQL Toolkit, but I will try and offer high level ideas :-)
when you have retrieved the construction data for a table, you should be able to use array and cluster indexing to aquire the names of the fieds, enough to create a labelled table on the LV Front panel.
After completing a new entry you can INSERT the entry into the database using the same data.
Is the SQL toolkit an additional purchase, or included in newer versions as standard? If you post a sample of the cluster/array that you retrieve, I could give you a sample VI to give you some pointers in creating the User Interface table
- Cheers, Ed

How to find out that the database table is empty

Hello all,
How to find out in ABAP in the best performant way, that the database table is empty. The table could have several milions of records or be empty. SELECT count( * ) looks to me as not the best way.
Kind regards
Radim Benek
Moderator message: FAQ, please search for previous discussions of similar topics.
example: "SELECT SINGLE" vs. "SELECT UP TO 1 ROWS"
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Edited by: Thomas Zloch on Aug 11, 2011 5:06 PM

Hi,
One approach is:
check lt_mytable is initial.
This will be true if there are no lines.
Another:
describe table lt_mytable lines lv_count
if lv_count = 0.
"Empty
Thanks.
Anitha a

How to Delete rows in the database table by using Table Control

Hi Experts,
I wrote one program.
In that program i used table control.
I displayed data from database table in the table control, but i want to delete selected rows.
Can anybody please tell me this by writing sample code
thank you
Basu

Hi ,
Pls try this coding below or check the prg demo - RSDEMO02 in se38
WHEN 'DELL'.
* remove marked lines
      LOOP AT IT_SPFLI WHERE MARKED = 'X'.
        DELETE IT_SPFLI.
      ENDLOOP.
      IF SY-SUBRC <> 0.
        GET CURSOR FIELD FLD LINE LINNO OFFSET OFF.
        SET CURSOR FIELD FLD LINE LINNO OFFSET OFF.
        IF FLD CP 'IT_SPFLI*' AND SY-SUBRC = 0.
          LINNO = LINNO + TC_SPFLI-TOP_LINE - 1.
          DELETE IT_SPFLI INDEX LINNO.
          TC_SPFLI-LINES = TC_SPFLI-LINES - 1.
        ENDIF.
      ENDIF.
or another eg :
MODULE USER_COMMAND_0100 INPUT.
    SAVE_CODE = OK_CODE.
    CLEAR OK_CODE.
    CASE SAVE_CODE.
WHEN 'DELE'.
            CALL FUNCTION 'COPO_POPUP_TO_GOON'
                EXPORTING
                     TEXTLINE1 = 'Selected rows will be deleted!'
                     TEXTLINE2 = 'Are you sure?'
                     TITEL     = 'Delete rows'
                IMPORTING
                     answer    = confirmation.
            IF CONFIRMATION = 'G'.
                REFRESH ITAB_PHONELIST.
                CLEAR ITAB_PHONELIST.
            ENDIF.
MODULE EXTRACT_USERDATA INPUT.
    CASE SAVE_CODE.
        WHEN 'DELE'.
            IF SELECTION IS INITIAL AND
               confirmation = 'G'.
                 CLEAR ITAB_PHONELIST.
    ITAB_PHONELIST-NAME = RECORD-NAME.
    ITAB_PHONELIST-PHONE = RECORD-PHONE.
    ITAB_PHONELIST-EMAIL = RECORD-EMAIL.
    APPEND ITAB_PHONELIST.
<b>Reward pts if found usefull :)</b>
regards
Sathish

How to Display Hierarchy of depending database tables (Key Comparison)

Similar Messages

Maybe you are looking for