How to display message when no return values in powershell script?
Hello,
I have written following command that returns "Failed" timer job titles for previous day :
$FailedSPTimerJobs = Get-SPTimerJob | % { $_.HistoryEntries } | Where-Object {($_.StartTime -gt $YesterdayStartDateTime) -and ($_.To -lt $YesterdayEndDateTime) -and ($_.Status -eq 'Failed')}| Select JobDefinitionTitle | ConvertTo-Html -Fragment
ConvertTo-Html -Body "<font color = blue><H4><B>Report </B></H4></font>$FailedSPTimerJobs " -Title "Test Report" -CssUri C:\style.CSS | Out-File "E:\Reports\Test.html"
However, I need to display Message ( "There are no Failed Jobs recorded") when records are NULL.
Would you please let me know how can I achieve this ?
Thanks and Regards,
Dipti Chhatrapati
You could just do something like
if ($FailedSPTimerJobs){
$FailedSPTimerJobs
= "There are no Failed Jobs recorded"
should have been
if (!$FailedSPTimerJobs){
$FailedSPTimerJobs
= "There are no Failed Jobs recorded"
Similar Messages
-
How to save message when getting "email not responding"
how to save message when getting "email not responding"
How could you even know if you have a message if the email account isn't responding?
Quit the mail app and reboot your iPad.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the mail icon. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
How to clear alert when a null value is returned for a metric column?
Hey all,
Recently, I've encountered a problem about clearing alert when a null value is returned for a metric column. From Oracle official doc, it seems that NO_CLEAR_ON_NULL could be used for this propose. However, it doesn't.
Here is the line from doc, you can see when NO_CLEAR_ON_NULL is set as FALSE, the null value will clear alert, and the default value for NO_CLEAR_ON_NULL is FALSE.
NO_CLEAR_ON_NULL: This attribute is used to control severity clearing when a null value is returned for a metric column. It defaults to FALSE with the behavior that a null value ends up clearing previous alert severities. With a TRUE value for this attribute, null values will be skipped in severity evaluations without clearing the severity.
TRUE | FALSE (default)
STATELESS_ALERTS: This attribute if set to TRUE indicates to EM that alerts on this
column will not have corresponding clears. This allows the UI to decide whether to
allow users to manually clear alerts on this column.
TRUE | FALSE (default)Here is my code for the metric,
-- meta definition
<Metric NAME="Flushing_Table_Overtime" TYPE="TABLE" HELP="NO_HELP">
<Display>
<Label NLSID="mmd_ip">Flushing Table Overtime</Label>
</Display>
<TableDescriptor>
<ColumnDescriptor NAME="State" TYPE="STRING" IS_KEY="FALSE">
<Display>
<Label NLSID="mmd_rc_State">State</Label>
</Display>
</ColumnDescriptor>
<ColumnDescriptor NAME="Time_Seconds" TYPE="NUMBER" IS_KEY="FALSE">
<Display>
<Label NLSID="mmd_fto_Time_Seconds">Flush Table consume Seconds</Label>
</Display>
</ColumnDescriptor>
</TableDescriptor>
<ExecutionDescriptor>
<GetTable NAME="MysqlProcessAggregate"/>
<GetView NAME="v_flushing_tables" FROM_TABLE="MysqlProcessAggregate">
<Column NAME="State" />
<Column NAME="Time_Seconds" />
<Filter COLUMN_NAME="State" OPERATOR="EQ">Flushing tables</Filter>
</GetView>
</ExecutionDescriptor>
</Metric>
-- coll definition
<CollectionItem NAME="Flushing_Table_Overtime">
<Schedule>
<IntervalSchedule INTERVAL="10" TIME_UNIT="Min" />
</Schedule>
<MetricColl NAME="Flushing_Table_Overtime">
<Condition COLUMN_NAME="Time_Seconds"
CRITICAL="30" OPERATOR="GT"
MESSAGE="There is a Flushing Table command has exceeded %critical_threshold% seconds."
MESSAGE_NLSID="msg_Flushing_Table_Overtime" />
</MetricColl>
</CollectionItem>If this feature can not be achieved by coding XML, then is there a way to clear alert with Oracle Package? I have confirm neither sysman.em_severity.delete_current_severity nor sysman.em_severity.clear_alerts could do it.
Would anyone give me a hint?
Thanks in advance!
Best wishes,
Satine> I am executing in this manner
var RESULT BOOLEAN;
BUT I am unable to create variable with boolean data type.
WARNING. Do not confuse SQL*Plus with PL/SQL.
There is no variable command in PL/SQL. PL/SQL does support the boolean data type.
There is a variable command in SQL*Plus. It allows one to define bind variables. It is limited in the data types it supports. It does not support boolean as a bind variable type.
SQL*Plus is a CLI (Command Line Interface) client tool. It has a very limited vocabularly, allowing you to (primarily):
a) configure its local environment (e.g. size of the terminal ito number of characters per lines)
b) configure its bevahiour (e.g. spooling data to a file)
c) defining substitution and bind variables
And that's it. It is not PL/SQL. It is not SQL. It takes the PL/SQL and SQL you enter, and submit that to the Oracle server. (it does some basic parsing of the data to substitute variables and bind variables where applicable)
Do not confuse this CLI client tool with the server side PL/SQL or SQL languages. -
How to get the displayed message when using FM: ABAP4_CALL_TRANSACTION
Hi,
I am calling FM ABAP4_CALL_TRANSACTION from MS-Excel. This FM works perfectly for me except the system messages that SAP returns are not always understandable or intituative. My question is there another FM or Table that I can use to convert the data from MESS_TAB to a more meaningful message for the users?
Examples listed below:
Normal T-Code Message
FM Message in MESS_TAB
Real Meaning
Fill in all required entry fields
COBL-RMVCT
Field COBL-RMVCT is a required field
Document 400000000 was posted in 130
4000000000 130
Document 400000000 was posted successfully
Thanks for your HelpHi Karim,
when you have the parameter to generate the message, you can use the following RFC function module:
BAPI_MESSAGE_GETDETAIL
The module has the following interface:
*"*"Lokale Schnittstelle:
*" IMPORTING
*" VALUE(ID) LIKE BAPIRET2-ID
*" VALUE(NUMBER) LIKE BAPIRET2-NUMBER
*" VALUE(LANGUAGE) LIKE BAPITGA-LANGU DEFAULT SY-LANGU
*" VALUE(TEXTFORMAT) LIKE BAPITGA-TEXTFORMAT
*" VALUE(LINKPATTERN) LIKE BAPITGA-LINKMASK OPTIONAL
*" VALUE(MESSAGE_V1) LIKE BAPIRET2-MESSAGE_V1 OPTIONAL
*" VALUE(MESSAGE_V2) LIKE BAPIRET2-MESSAGE_V2 OPTIONAL
*" VALUE(MESSAGE_V3) LIKE BAPIRET2-MESSAGE_V3 OPTIONAL
*" VALUE(MESSAGE_V4) LIKE BAPIRET2-MESSAGE_V4 OPTIONAL
*" EXPORTING
*" VALUE(MESSAGE) LIKE BAPIRET2-MESSAGE
*" VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
*" TABLES
*" TEXT STRUCTURE BAPITGB OPTIONAL
Best regards
Thomas -
Display message when record is save in table
Hello,
How can i display message as "Record Save" when record successfully save into table.
I have created a form and take one save button, when values fill up in the textboxes and SAVE button pressed record is successfully inserted in the table then
but how can i display popup window that "Record is save".
Thanks in advance.Hi,
your page process can have a "success message" which will be displayed after this process has finished and the page is freshly displayed (if your branch doesn't filter the process success message).
This would be the easiest way to display "Record is save", if you want to do this in a Popup (which is oldskool...) then you can add some javascript code to your process success message.
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at -
Change the af:inputListOfValue error message when enter invalid value?
Hi all,
I am using JDeveloper 11.1.1.2.0
When I have af:inputListOfValue in page and put invalid value the error message will appear. I want to display my own error message. How can I change the LOV invalid number error message?
Thank You...
Sameh Nassar
Edited by: Sameh Nassar on Aug 20, 2010 5:52 PMRefer:
Section 28.10, "Customizing Error Handling"
in below link:
http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/web_adv.htm#ADFFD19884
Amit
I guess above post won't you much .. I spend sometime on this issue as it got my attention
It seems there is very less info on how can we over ride default bundle message for the "Invalid Value" error we get
however you can create your validator for LOV and handle the validation and message in that..
Here is the link that provides a good detail on how to create / register a validator.
Once registered you can update the Validator ID of f:validate of LOV and remove the binding property value.
Edited by: amseth on Aug 20, 2010 1:03 PM -
How to display texts automatic. besides entered value for a field in Trans.
How to display texts automatically besides the entered value for a field in a standard transaction screen. For example you have a value table and a text table associated to it. Then on entering the value field and pressing enter the text associated should get displayed immediately besides the value. Like if you have 'LOC' as the value and 'Location' as the text associated to it, on entering this value 'LOC', you automatically get the text 'Location' printed besides it automatically in a transaction screen ?
Message was edited by: Sarika KediaHi sarika,
Welcome to SDN.
1. first of all, such display of text,
is not automatic.
(it appears to be automatic)
2. At design time,
a) take one extra field for text
and mark it as OUTPUT ONLY
3. Then in PBO coding,
call some module, and in that module
write code
4. The code should be to
select from TEXT Table
into the work area.
EG. THE SCREEN TEXT FIELD NAME IS
T510A-FIELDNAME.
CLEAR t510a.
SELECT SINGLE * FROM t510a INTO t510a
WHERE trfar = FIELVALUE.
5. This will take care of
displaying the text value of that field.
regards,
amit m. -
How to display data depend upon ListBox value?
Hi Experts and Particularly Hema,
As I asked before how to display data in the ListBox, I got an very good response from you all(particularly Hema) .
Now what my doubt is asked with sample scenario below:
In Screen Painter -
Two fields namely : One List Box and other is I/O used only for displaying purpose i.e., only for output, not for input purpose.
List Box is filled by primary key field(C1) value from one table(T1) when the screen load.(i.e., such code is written in PBO).
Now what I need is :
If the user select any one value in the List Box then it automatically display the corresponding C2 value from T1 in the I/O field.
I think you may all understand what I am trying to ask.Please let me know the solution.
Thanks in advance,
Regards,
RaghuSimply attached a function code for the listbox... when the user changes the value, you will be able to pick this up in the PAI and loop back to the PBO and redisplay the corresponding output field.
Jonathan -
How to map the method action return value directly into screen using variables?
Hi,
My JDev version is 11.1.1.6.3.
I have a 'MethodAction' defined in PageDef file, that goes to model layer and return String value. As this needs to be executed during initializing of pageDef, I have also added an 'InvokeAction' for that.
<executables>
<invokeAction id="invokeSayHelloId" Refresh="ifNeeded"
Binds="sayHello"/>
<variableIterator id="variables">
<variable Name="Name" Type="java.lang.String"/>
</variableIterator>
</executables>
<bindings>
<methodAction id="sayHello" InstanceName="HrAMDataControl.dataProvider"
DataControl="HrAMDataControl" RequiresUpdateModel="true"
Action="invokeMethod" MethodName="sayHello"
IsViewObjectMethod="false"
ReturnName="data.HrAMDataControl.methodResults.sayHello_HrAMDataControl_dataProvider_sayHello_result">
<NamedData NDName="pName" NDValue="Michael John" NDType="java.lang.String"/>
</methodAction>
</bindings?
Requirement:
I want to map the return value of this method action directly into screen by making use of PageDef variables.
Question:
I. I need to know how to map this return value direcly as exprssion against PageDef variable.
2. If Question 1 is achievable, assuming the method action returls List instead of String (I know well it returns 2 items), can I map the 1st Item against Variable 1 and 2nd Item against Variable 2 directly?
Thanks in Advance.
RaguThanks Frank, but If I directly map the MethodAction's result to UI, there are chances where it might get executed whenever I refresh the UIComponent (UIComponent to which the methodAction result is mapped. Isn't so??). Instead, If I invoke the MethodAction using InvokeAction, I can get the control on when it should get invoked (using RefreshCondition). If I assign the variable to UIComponent (Assume I've mapped the method action result to variable using expression), refreshing of UIComponent will not cause any performance issue I feel.
Correct me If I am wrong. -
How to popup message when delete any items inside ME22N Screen?
Hi anybody,
I want Display Error Messages when user click "DELETE ICON" inside ME22N Screen.
Is there any user exit or BADI?
Anybody please tell me how to do?
Thanks
Regards,
S.Muthu.Hi,
You should be able to use one of the includes in SMOD MM06E005 for this. We have e.g. used ZXM06U4 for multiple error messages even if this is not the core purpose of the include. You need to check out the different includes to find which suit your purpose best - i.e. is called at the right time. You can probably not find one that is called when the delete icon is pressed, but at least on that will prevent saving. -
How to display message in the alert box
hi every one,
i am inserting some data into the fields and selecting the button to insert.
but it is inserting even fields are empty..
i want to display "so and so field is empty.. please enter"
it should display a box and return if u press ok.
how to do thisHi,
I think this code will help you.
public void onActionAddressSelected(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionAddressSelected(ServerEvent)
String dialogText = "Would you like to fetch this EmaiId ?";
IWDConfirmationDialog dialog = wdThis.wdGetLoginController().wdGetAPI().getWindowManager().createConfirmationWindow(dialogText,wdThis.wdGetAPI().getViewInfo().getViewController().findInEventHandlers("Yes"),"Yes");
dialog.addChoice(wdThis.wdGetAPI().getViewInfo().getViewController().findInEventHandlers("Cancel"),"Cancel");
//dialog.addChoice(eventHandler,"OK");
dialog.setWindowPosition(WDWindowPos.CENTER);
dialog.open();
//wdThis.wdGetLoginComponentController().fireAddressSelectedEvent();
//@@end
Regards,
Karthick -
How to display message in Ajax Model pop-up extender/overlay on click of a link button
I am dynamically create the link button using reapeter control and each link assign to different type of content.i want to show the content in a overlay / Ajax modal pop-up extender. ( Content Type: Video/PDF/Text).
I need to know how to display the content in overlay/Modal pop-up on click of the link button.Hi,
According to your description, my understanding is that you want to display the content of Video/PDF/Text in a pop-up dialogue when clicking the link button.
I suggest you can use the Jquery media plugin to open the file content in a pop up dialogue.
Here is a detailed code demo for your reference:
Jquery: Open PDF File in browser with Modal Popup using Jquery Media Plugin
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Error In Displaying Message When There Is An Attachment
I am trying to display an error message in SharePoint 2013. I added the following code
inside my ItemAdding() event receiver to force it to have error:
properties.Status = SPEventReceiverStatus.CancelWithError;
properties.ErrorMessage = "test";
It
works okay, I can see the error message.
However, when I attach any files, and try again, after saving, the attachment will disappear.
When I attach again, I will get a server error:
Please advise.Hi,
According to your post, my understanding is that you wanted to display error message when there is an attachment.
You need to add “properties.Cancel = true;” to your ItemAdding() event receiver.
You can cancel the event using:
properties.Status = SPEventReceiverStatus.CancelWithError;
properties.Cancel = true;
properties.ErrorMessage = "test";
The properties.Cancel determines if the event should be cancelled. The default is false but once you set it to true it will cancel the event when the current execution ends.
Here is a similar thread for your reference:
http://stackoverflow.com/questions/17828963/custom-error-message-for-event-receiver-in-sharepoint-2010
More information:
http://davehunter.co.uk/2009/03/12/sharepoint-event-receivers-by-example-email-validation/
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
How To Get more than one Return Values in LOV ADF
In ADF LOV, I can get only one return value;
How can I Get more than one values like in Oracle Form?
SomeOne can help me?
Thanksyou may add more <set> tag like the following:
<event name="lovSelect">
<set property="inputValue" value="${bindings.Id.inputValue}" target="${data.work_workBusinessViewUIModel.buyCompanyId}"/>
</event>
or you can implement your Action -
How to display records when clicking button in alv
I am using screen painter to create two buttons
'classical' and 'alv'.
When i click the first button control should move to
corresponding classical program.Evan i got the answer
I am not able to display the "select-options button" in the
output as in classical report program.
It displays all records instead of selecting particular records from select-option button.
So how to display the select option button(i.e in the classical view program) while "clicking the classical button " .
plz send me the coding....hi,
try this.
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : EBELN FOR V_EBELN MODIF ID G1,
VBELN FOR V_VBELN MODIF ID G2.
SELECTION-SCREEN END OF SCREEN 100 .
PAI.
module mod_name.
case sy-ucomm.
when 'BUTT!'.
call selection-screen 100.
when 'BUTT2'.
""""your ALV logic"""".
endcase.
endmodule.
if...any doubts revert back.
Regards
Sandeep Reddy
Maybe you are looking for
-
When scanning a negative, it crashed. Then the software won't open and keeps throwing 'Error'. Process: EPSON Scan [796] Path: /Applications/Epson Software/EPSON Scan.app/Contents/MacOS/EPSON Scan Identifier: com.epson.scan.st
-
Hello, I've just uploaded my first Muse site: www.michaelphipps.net It worked well and looks perfect in Firefox on my computer (I haven't checked IE yet). In Safari, some of the rollover images are showing as a different color than the background. Se
-
Hi I'm currently using a Sony HDR-SR10e camcorder AVCHD format and editing in Final Cut Express 4. I wanting to use a Sony M15 HDV deck to capture in HDV mode but not having much success. Is there any settings I need to enable me to do this. All my f
-
Hi: I trying to develop a method in a program but I keep getting the following error message: Monoalphabet.java:59: Method void encrypt() requires a method body. Otherwise declare it as abstract. public static void encrypt(); Can someone please tell
-
Get parent of e.target.name
Hi, How would you get the name of the parent of a movieclip? Any ideas? below is only some of the options I tried to trace. function getParentName(e:MouseEvent):void{ trace(e.target.parent.name); trace(parent(e.target)); trace(this.par