How to display smartform through transaction code on action of button

Hi All,
Please let me know how can i display smartform through tcode on button action.
For e.g. I have a F.62 tcode where the smartform is attached. Now i want a button in BSP which when clicked should call tcode F.62 and display that smartform.
Also if i cannot use "CALL TRANSACTION" can i use "SUBMIT" and call that transaction.
If not how will i able to acheive that?
Please help as it is very urgent.
Thanks,
Rahul

Hi,
Use ITS to display the F.62 transaction is worth a try. But I am not sure whether the ITS will be able to display Smartforms...
Another option is trying to launch the Smartforms (I dont know the F.62 transaction enough to tell if it is time-consuming or not) and convert it to PDF (there is plenty of threads about this in SDN) and then, display it through BSP (either inline or for the user to download).
Best regards,
Guillaume

Similar Messages

Assign Smartforms to Transaction Code F.27

How to assign SMARTFORMS to transaction Code F.27

Hi,
Refer to the link given below.
http://help.sap.com/saphelp_nw04s/helpdata/en/6e/db0cee629b4f43a4f93f59e979aa8a/frameset.htm
Regards
Rajesh Kumar

How can I pass through error code 1009

How can I pass through error code 1009

See this support document. While I do not see an explanation for error code 1009, the closest ones describe 3rd party security software or a hardware fault. You decide which direction you want to head in. http://support.apple.com/kb/TS3694

How to display smartforms table lines useing different background colour

Hi all:
How to display smartforms table lines useing different background colour .
for example:
line1:green
line2:red
line3:green
line4:red
line5:green
line6:red
line7:green
line8:red
Any help is highly appreciated!!
启明星

Hi,
Create a two lines one for header and second for data in the table.
1)In table painter we can find the pencil mark.
2)select the pencil mark
3)now select the line which you need to shade
4) now select the shading colour in the table painter and the provide the resolution up to 100% and select table pattrn for that line.
5) Now you can use this for the header now only the header gets shaded and the remaining gets unshaded.
reward points if useful
Thanks and Regards,
Nishant

How to create object through transaction snro

Hi ,
   I want to create an object through Snro transaction.
I dont know how to use this transaction.
Please Help.
Thanks in advance.
Nikita

Nikita,
Based on the transaction code, respective function consultant will create number range.
If u want a number series for some other purpose in ur program u can create object in snro as below.
1. Enter a object name and click 'CREATE' button
2. In the next screen give relevant description
3. In 'Number length domain' field u can specify the length of number .. example if u give char10, then it will be a ten digit number series.
4.Enter warning percentage.. the purpose is to throw warning message 10 % before when ur number series about to exhaust.
5. After entering those details --> press save button.
6. Again come to main screen (SNRO initial screen) then click number raneg tab inthe application tool bar.it will take u to next screen.
7. In that click internal change push button
8. IN the resulting screen enter ur number range series,
example
01     00000001     09999999
02     10000000     19999999 etc
9. click save button..NOw ur number series is ready for use.
Regards,
Aswin.

Dynpro access through transaction code

Hi,
I have generate an ABAP dynpro out of a WSDL file. Now I would like
to access this dynpro through a transaction code in the SAP GUI.
How can I do this?
thanks
chris
Message was edited by:
Christian Riekenberg

Use Transaction SE93 die create a dialogtransaction entering the package, program name and dynpro-number.

Assign smartform to transaction code CO02

can somebody tell me how to assign my smartform to the transaction code CO02?
many thanks!

Hello,
You can assign new SMARTFORM to the OUTPUT type in the transaction code NACE
Goto the Transaction code NACE and select the Appllication as P1 and then goto the OUTPUT types in the Menu , choose your OUTPUT type and click on the PROCESSING ROUTINES in the control tab left side.
There u will find the option to add the *SMARTFORM* and the PRINT PROGRAM for different mediums.
Hope it clears you,
thanks,
santosh

Error while executing the payroll through transaction code PC00_M40_CALC

Dear Sir/ Madam,
While executing the payroll through the transaction code PC00_M40_CALC , i am getting the error as mentioned below :
"Division by zero not performed "
Calculation rule X0133****5 RTE = ISDIVP DIVID ARR ZERO=A ADD
I am not able to resolve this error. So request to guide me on this.
Thanks & regards,
vijaya.s.c.
Moderator message: wrong forum, please have a look in the (I guess) ERP HCM forums.
Edited by: Thomas Zloch on Jan 24, 2012

Hi,
Maintain have you changed any x013 rule?
If not, just maintain attendance/time events then process the payroll.

PO creation through transaction code ME25 (vendor unknown) - reg.

Dear all,
When I'm doing excercise using transaction code ME25 (PO creation - vendor unknown), the system shows the error message as "Item category not allowed with document type".
How to overcome this issue.
Plz do the needful at the earliest.
Regards,
Chandramohan.N

Hi
Chandramohan
You can do this in IMGMM-PURPO and Define Doc types and select the required Doc type and Select the Allowed Item Category. In this way you can allow the item category to the respective Document type.
The item category determines the field selection and whether any additional data screens are shown.
In addition, it determines whether a goods receipt or invoice receipt is to follow.
The following list contains the item categories defined in the standard SAP R/3 System:
Standard,Consignment,Subcontracting,Third-party,Stock transfer,Service,Material unknown and Material group
If helpful reward the points..

Post with clearing through transaction code f-04

Hi
While clearing the Gl account Manually with transaction code F-04 we
are getting the Error Consolidated companies SASA and ' ' are different
Diagnosis
The number of the affiliated company must be clear for the selected
document type for all line items. In this case at least two different
companies or a company in connection with a business partner who does
not belong to a company are stated.
Procedure
If you selected the correct accounts, you must enter the document with
a document type that allows cross-company posting. Otherwise, please
correct the entered account.
Please help in this matter. This is bit urgent
Regards
Vinay Bhaskar

Hi Manasi,
As the name suggest, F-04 allows you to POST to one account by CLEARING another account.
For example you have a provision account which needs to be adjusted when the actual expense is paid - this how it will be done -
Give the document header details, select "Transfer posting with clearing", enter the posting key (40), give the GL account (expense account as per the example) and go to the next screen.
Give the amount and other details for the line items and then select "choose open item" from the menu. The new screen will ask you to give an account where you will give the provision account (the account from which the open item needs to be cleared).
Press enter and you will get the list of open items for the GL account from where you can proceed like any other clearing.
Hope this clarifies. Do revert in case of any further queries.
Thanks and Regards,
anit

How to display a particular transaction over portal as per its id

hi
we have a requirement like this...
we have already developed some 200 iviews and the corrosponding pages...
now we want to develope an application either in web dynpro or pdk that we will upload over portal. that application will be having an inputfield for entering transaction number and a search button.
on the click of button our application must be able to search and display the corrosponding transactional iview already developed
plz guide on how this is possible

Hi,
I don't think message input text allows to set URI property and it is available with MessageStyledText.
So if you want to achieve your requirement then you can take two items one message text input and other one as messageStylesText then if it is readonlymode then hide input text and render MessageStyled text and viceversa.
In this case you will be able to display links in case of Readonly text.
Regards,
Reetesh Sharma

How to display smartform output?

Hi,
Can anybody give me some hint on how to display a smartform output containing tables and texts in a bsp?? I have searched the forum but since I am new to bsp,I am not finding a caompact solution by following which I can get the idea. Please help..

Hi,
Check this link [Smartform PDF output in BSP|Smartform PDF output in BSP;
Hope this helps you.
Regards,
Rajani

BAPI for customer Block/Unblock through transaction code : XD05

Hi Gurus,
I want to block/unblock customer sales areas(Transaction code : XD05) through program. Could you please suggest any BAPI for the same. As writing BDC will not be a good choice.
Please help.
Thanks,
Bhupender

Hello Bhupender,
the best and easies solution is the MASS maintenance transaction as proposed above.
For the BAPI question, sorry but there is NO BAPI to maintain a customer master data.
The function module provided by my predecessor, even if it has the perfect look like is definitively not the one to use.
Despite the name, this FM is designed to support only the maintenance of CONSUMERs.
Moreover it is not an RFC enabled function module.
It might work in your case, as the data to maintain is quite simple and limited but you still may face several troubles like NO change documents and change pointers created and/or no synchronisation with TREX, CRM, ...
There is also a BAPI with a nice name, but in fact it is designed to be used only with SAP Online Store and SAP Product Catalog.
The only reliable path for investigation is described within [note 384462|https://service.sap.com/sap/support/notes/384462].
A other path for investigation is the class CMD_EI_API which has been introduced with ECC 2005 (6.00).
You could wrap method MAINTAIN_BAPI inside of a bapi function module you would have written.
Otherwise, but still with limited functionality there are some eSOA webservices to find, read, maintain customer master data.
Hope this helps.
BR
Alain

How to display smartform as PDF in web dynpro java

Hi,
Where can I find sample program to display smartform as PDF in web dynpro java.
Thanks.
Regards,
Henry

1. Create a smart form in the R/3 side
2. Now create a function module with the corresponding export parameter:
3. Make sure that the function module is marked remote enabled.
4. In NWDS create an Adaptive RFC model which points to the FM created in R/3 under the webdynpro application
5. Now create an application and view inside it to display the PDF and Insert a frame inside the view
6. Create a value node and an attribute say url of type string inside that node and bind it to the source
7. In the doInit() method place the following code
>    ZTest_Pdf_1_Input input = new ZTest_Pdf_Input();
>    wdContext.nodeZTest_Pdf_Input().bind(input);
>    try {
>            wdContext.currentZTest_Pdf_InputElement().modelObject().execute();
>            }
> catch (Exception e) {
>                        e.printStackTrace();
>            }
> wdContext.currentInternalElement().setUrl(convert(wdContext.currentOutputElement().getBin_File()));
Inside that view create a method to convert the string to url so that it can be passed as a string to the setUrl method of the currentContextElement() , say convet(byte[] doc_content) which return a string.
Inside that methos write the following code,
>         String url = "";
>           WDWebResourceType webResType = WDWebResourceType.PDF;
>            IWDWebResource webResource = WDWebResource.getWebResource(doc_content, webResType);
>            try {
>                        url = webResource.getURL();
>            }
> catch (Exception e) {
>                        e.printStackTrace();
>            }
>            return url;
Hope It will be helpful
Regards,
Sam Charles J.

How to attach Form to Transaction Code F-92

Dear All,
I have a reuirement from my client, where in they need Printout for Transaction Code f-92, I want to know how to attach Form to the Transaction Code or is there any standard Form availabale in the system.
Thanks in advance
Dnyanesh Shenwai

Hi
The user menu is the set of menu of all roles of user, so you should check the roles of the user and update one of menu of user roles.
You can do it by transactions PFGC, but if you change a role you'll change the menu of all users have that role.
This operation usually is made by the administrators of system.
Max
Message was edited by: max bianchi

How to display smartform through transaction code on action of button

Similar Messages

Maybe you are looking for