How to display the Component view in the Pop up

HI.
I created one Z Component.
In that i put one Button name as a POPUP.
when i press that Button i want open an another component View or Same Component another View.
How it is possible.
I am writing the code in Event Handler.
CALL METHOD COMP_CONTROLLER->IF_BSP_WD_WINDOW_MANAGER~CREATE_POPUP
EXPORTING
    IV_INTERFACE_VIEW_NAME = 'ZKRI_NAVIGATION/DetailsOV'
    IV_USAGE_NAME          = 'ConfigStdAlone'
    IV_TITLE               = 'Hello'
RECEIVING
    RV_RESULT              = confirm_popup.
confirm_popup->set_on_close_event( iv_event_name = 'POPUP_CLOSED' iv_view = me ).
confirm_popup->open( ).
But i did not get the Popup with the view.
How it is possible. Please expalin how to call another view in pop up with in the Same Component.
How to call another component view

Hi,
Did you create a component usage of the Z component in the Run time Repository ?
You can look into any of the standard fields with an F4 help for sample code..like Business Partner etc.,
Regards,
Masood Imrani S.
Edited by: Masood Imrani on May 12, 2009 4:23 PM

Similar Messages

How to display the thumbnail view of the documents in Sharepoint Document Library

Is there a way that we can have the thumbnail view of the documents that are uploaded in SharePoint Document Library. We have thumbnail feature in Picture Library but can we have the same in Document Library too. Documents includes Words,Excel,PDF.
Any Suggestions Please

Hey Mike,
Good post, I'd be curious to see if anyone has used the GD Picture SDK with SharePoint, maybe there would be some sample code.
Hey Kukdai,
Developing your own solution would potentially provide a better way to accomplish your task, but before setting out on that long road you may want to try the simple customization, it's less time consuming and it will help gauge your customer's interest and
support.
Also, there is a wealth of open source code for SharePoint available on CodePlex, you might want to check that out as well. Here is the linK:
http://www.codeplex.com/
Also, here is an interesting project to consider for your task:
http://enhancedpicture.codeplex.com/
I hope that helps!
Tom Molskow SharePoint Architect - If I solved the issue please propose my reply as the answer - Thanks!

Display a Calendar View in the Portale Server

Hi, we use portal server 6.2 and we want to display a view of the calendar inside a channel of the portal.
We know that portal have a calendar provider but we really didn't understand how can we use this provider to call a custom view of the calendar.
Is it possible to display a custom view of the calendar inside a page of the portal ?
Thanx

Probably better to be posting this in the Calendar forum.

How to display properties of dimension on the input form and report in bpc

Dear Expert,
Please tell me how to display properties of dimension on the input form and report in bpc. I can only display dimension number.
thanks so much
hungth

Hi Hungh,
If your are using BPC 10 with EPM add in client, you can use the function:
EPMDimensionProperty ()
This function retrieves the properties of a specified dimension in a specified cell range.
Thanks, Safa

"I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library. Can't find it. Thanks

"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!

From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb

How can I get the component LTC1060 in the multisim 10 library ?

How can I get the component LTC1060 in the multisim 10 library ?

ahnsei ,
This is a switched capacitor filter - with a variety of configurations for each mode of operation based on the switching frequency. To create a transistor level SPICE model would be unrealistic (which is probably why you haven't found one), so I would suggest looking at the datasheet and specifically, looking at each mode of operation and seeing if you can approximate the filter topology with an expression for the transfer function given in the datasheet (by calcuting based on the switching frequency).
Based on the expression you get, you can use the Multisim component "TRANSFER_FUNCTION_BLOCK" to plug in the correct transfer function and thus approximate the behavior of the filter in the circuit.
This transfer function can be found in the Master database -> Sources -> CONTROL_FUNCTION_BLOCKS. There was a previous discussion giving some additional details on how to setup the transfer function block:
http://forums.ni.com/ni/board/message?board.id=370&thread.id=3987
Regards,
Patrick Noonan
Business Development Manager
National Instruments - Electronics Workbench Group
50 Market St. 1-A
S. Portland, ME 04106
Email: [email protected]
Tel. (207) 892-9130
Fax. (207) 892-9508

A gap between letters started to show in my indesgn files. tried to undo with tracking, the paragraph settings. nothing helped. it ruins the fluent view of the document. how can i restore the program so that doesn't happen?

a gap between letters started to show in my indesign files. tried to undo with tracking, then with the paragraph settings. nothing helped. it ruins the fluent view of the document. how can i restore the program so that doesn't happen?
for example: say i write a paragraph. then, in a weird some sort of way an involuntary gap suddenly appears between different letters of random words(i did not recognize any pattern to the gap appearing) throughout the entire paragraph. once i've double clicked on that paragraph, and made a minor change, lets say tapped a 'space' key, and then clicked ctrl+z to undo, it has aligned(or fixed) the entire paragraph and made it look ok again. i've tried numerous ways to undo the entire thing, but cannot find the reason. i've been working for a few years and there's no reason why this thing all of a sudden should happen right now.
if anyone has stumbled on something like that and can advise, i would welcome it.
MNS-KG
Vadim

yep...i'm typing with hebrew. i'll make a printscreen with the settings you've asked for@:
if you look closely you'll see that almost every line has a single letter apart. in hebrew there is no usually a singe letter structured words.

How to get the reference of the component JSF by the faces context

I have :
<h:commandLink id="toto" action="#{controller.test}" >
I want to get the reference of this commandLink component in function test of "controller ", for instance , to get the "id" attribute of it, so how to do it? by facescontext??????
Thanks a lot.

hi again:
to precise my question, i know that attribute "actionListener " of the component can let the controller.test know the reference of the component ,but if i want to know when the getters are called for example <h:outputText value="#{controller.myValue}"> it calles the controller.getMyValue() , so in the getMyValue, how to know which component calls him?
Thanks a lot...

How to display multi-channel image in the 'proxy'?

There're many examples to show how to display composite channels in the 'proxy'. But I don't find any example to show how to display multi-channel image in the 'proxy'. I found that I can use PSPixelOverlay to display alpha channel data like this:
int nSpotChannel = gChannelCount - 4;
PSPixelOverlay* overlay = new PSPixelOverlay[nSpotChannel];
for(int i = 0; i < nSpotChannel; i++){
       if( i != (nSpotChannel - 1) )
             overlay[i].next = overlay + i + 1;
       else
       overlay[i].next = NULL;
       overlay[i].data = gChannelData + (4 + i) * nPlaneBytes;
       overlay[i].rowBytes = gProxyRect.Width() * gDocDesc->depth / 8;
       overlay[i].colBytes = 1;
       overlay[i].r = 230;
       overlay[i].g = 161;
       overlay[i].b = 174;
       overlay[i].opacity = 255;
       overlay[i].overlayAlgorithm = kStandardAlphaOverlay;
pixels.pixelOverlays = overlay;
Then, Seeing red part, it will trigger a new problem, that is how to get the color value of the alpha channel by plung-in itself? It seems that no channel color value info is in FilterRecord.
If you have other solution, please tell me. Many thanks!

This is what I've been doing - was just curious if there was a way to see a more cohesive image.
If the individual EQ plugins are in fact the answer, is there any way to smooth how the Analyzer displays? The image I posted above, all of the tonal curves are very smooth. The analyzer tool shows a lot of peaks and valleys within the overall curve and it's hard to pinpoint each instrument's "sweet spot." Vocals for example are very hard to spot.
- Morgan

More than one business component (views) in the same JSP page

Hi, I am trying to have more than one business component (views) in the same JSP page as Input Form.
For example:
There are two BC4J:
Person:
Code.
Name.
Address:
     Person_code
     Street.
     City.
There is a master detail relationship between them and there is a link between both views in the application module.
I want to create a JSP page with an Input form for both views. When the user decides to create a Person, I need to insert in both tables.
Insert code and name into Person table.
Insert Person_code, Street and City into Address table.
It is possible to do in Forms but I am not sure if I can be able to do this in JDeveloper 10G.
Thanks

Sorry I lost the tabs
Person has two attributes Code and Name.
Address has three attributes Person_coden Street, City.

In mini bridge how do I set the default view to the filmstrip?

Hello,
In mini bridge how do I set the default view to the filmstrip?
Thank you.

Mark, there's a very basic .NET method on every nullable object:
GetValueOrDefault
EDIT: Now I see...please avoid duplicating
questions...
To be clear:
Put GetValueOrDefault on every nullable field used inside your 'TotalDue_Compute' sub
You don't need to define 'TotalDue' as Nullable anymore

How to display language key (0LANGU) in the query for BW report

Hi,
Can someone tell me how to display language key (0LANGU) in the query? I want to display which language (English or French) is used for material description in BW report. Thx.

hi,
check if the infoobject is kept as lang dependent or not for material text, else you need to create a masterdata attribute with text and lang keys and do corresponding mapping, so then it can be displayed in your report
regards
laksh

How to display my country flag on the task bar in osx mavericks?

How to display my country flag on the task bar in osx mavericks?

System Preferences > Keyboard > Input Sources
Checkmark the box beside "Show Input menu in menu bar".

How can I make GRID view the default view? The icons for view that used to be located in the upper right top of the page near the 'search library' are gone.

How can I make GRID view the default view? The icons for view that used to be located in the upper right top of the page near the 'search library' are gone.

99jon wrote:
Perhaps it’s a design feature to speed up the Organizer launch.
I am sure it is.
- The normal use of the Organizer is not the folder view, it's the thumbnail view with an organization based on categories and folder. That way you should forget completely where your pictures are stored. Anyway, the folder view in the Explorer is not a map of the location of the different bits of your file, it's only a logical representation. That's easy to see when you are doing a defragmentation.
- The folder view is useful even for those using normally the thumbnail view, but that is only for rare cases when you must change the folder organization, for instance moving files to another drive. The folder view is here to prevent you from changing things from the explorer and outside of the Organizer.
- The new folder list view, which you find 'funny' is there to help better organizing using tags. Its huge advantage is that such a view is created extremely quickly by extracting the last subfolder in the media table : it's the way the database sees the folders, based on its own content, totally ignoring the complex folder organization of your disk with media files or any unrelated other kind of data. You should use it in many cases, the main purpose being assigning tags when you have assigned descriptive folder names. I had suggested such a solution to prevent the long standing bugs in the folder view of previous versions.
So yes, the purpose is:
- to speed up switching modes
- to help folder organization fans to migrate to tags organization
- to hopefully get rid of the old folder organization bugs

¿How can I see more than a day in the calendar view of the notification center?

Hi guys! I wanna know if there's any option to see more than a day in the calendar view of the notication center. I swear I saw a friend of mine who could see more than a day in the notification center.
Than

In Settings > Notification Center, try turning "on" all the six buttons under "Today View". Also turn "on" the top two buttons under "Access on Lock Screen". Doing that should show you "Tomorrow" at the bottom of Noticiation Center.

How to display the Component view in the Pop up

Similar Messages

Maybe you are looking for