How to do a FTP from one system to another
Hi,
I have a program which creates a file from the master data in one system (Logistics), and I have another program in another system (HR) which writes the contents from this file to a custom table.
I want to the avoid manual movement of the file among the systems. One option would be to create a common location on the file system which is accessible from both these systems.
But, could someone help me on doing a FTP of this file to HR system.
Appreciate your inputs.
Thanks
M
Mark,
Check if this can give you any lead.
data:host(64) TYPE c VALUE 'ip address here',
dest LIKE rfcdes-rfcdest VALUE 'ZFTP',
User and password can be harcoded in the program
*CONNECT TO SERVER
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
user = user
password = pwd
host = host
rfc_destination = dest
IMPORTING
handle = hdl
EXCEPTIONS
not_connected = 1
OTHERS = 2.
K.Kiran.
Similar Messages
-
How to transport CU02 objects from one system to another?
Hi,
How to transport CU02 objects from one system (Development) to another (Quality)?You need to set up the object dependency IDOC in the partner profile.Message type is KNOMAS. The transaction to send is CLD2.
-
How to copy a webi from one system to another system? l
like from production system to another develop system
thanksYou should use Import Wizard to transfer the WebI report from one system to another, say, from DEV to PRD, but if you have also distinguish the DEV data source and the PRD data source, you will also have to modify the underlying universe connection after you transfer the report itself.
If you're on BusinessObjects Enterprise XI 3.1 or above, you may also look at the free tool BusinessObjects Life Cycle Management which can 'promote' contents from one system to another. -
How to copy a table from one system to another system
Hi all,
can any one say how to copy table from one system(sys1) to another system(sys2).
regards,
nagarajThere are many ways.
1. Use the already existing transaport request number for that table to do the transaport (Active)
2. Create mannual transport request from SE01 and in the object list enter following
R3TR -- TABI -- <Table Name>
And do the transaport.
3. Ask your basis consultant to do the transaport from oracle layer.
Thanks, -
How to send doc files from one system to another using XI
Hi All,
I have a requirement to pick the word doc files from one file system and send these word document files to ECC system place in ECC application server.Can we achieve this requirement using XI. If so how we can do this. also let me know can we convert these doc files into proxy and send to ECC?. Please let me know. Thanks.
Regards,
RajeshYes You Can
XI Converts Unstructured data(That is non -XML)Type- in your case word doc and maps it to Target structure.
You can either use content conversion
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
You can either built a adaptermodule for the same(U nedd to have Some Java knowledge)
You can also convert without creating any objects in integration directory link for the same is
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
***********Please Reward Points If find Helpful********* -
How can we copy FSV from one system to another system
Hi Gurus,
I was created FSV in sand box, i want to creat same in Dev system also
like this i have to create 5 fsv s in dev system which already created in sandbox
is there any way to copy from sandbox to Devsystem
Kindly guide me on this
Thanks in advance
KumarYou don't mention which operating system you have so it's difficult to provide an answer since the mac and Windows stores the files differently.
The other thing you can do is just re-download the apps from the iTunes Store. Just login to the iTunes Store on the other computer using the same Apple ID. On the right-hand side of the iTunes Store page you will see a 'Purchased' link. Clicking on that will take you to a page that will list your past purchases which you can re-download to the new computer. -
How to transfer data from one system to another by datamart please give de
how to transfer data from one system to another by datamart please give details
Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK. -
How to use utl_ftp package to transfer files from one system to another
Hi all,
How to use utl_ftp package to transfer files from one system to another using plsql procedure .
I failed to find the appropriate document ,kindly help me .
Thanks,
P Prakashprakash wrote:
I am sorry tell you, this blog is not enough to for me.It's not a blog, it's Chris' website where you download the package from. Once you download the package and unrar it, then the package spec gives instructions (and I think there's instructions on how to install it too).
Kindly let me know if there is any oracle documentation for this .It's not an Oracle created package, it was created by Chris. It's based around the UTL_TCP package if you really want to get into the nitty gritty of how it works, but I don't think you do. -
How do you copy/move the ASU Toolbox task list from one system to another
We are upgrading from 3.5 to 7.01 and have maintained the the task list in /n/asu/upgrade in our sandbox. I would like to be able to move the task list to our other systems so I don't have to reenter the tasks again. I know the base tasks are in an xml file but I don't know which one.
Does anyone know how to move/copy the tasks from one system to another?I agree with Antonio, but since we don't know if the Mail app on the Mini is the same version as the one on your new iMac, I'd err on the side of caution and allow Mail on the new iMac to set up; additionally, I'd prefer to start with a new preference file. In order to make it easier, you could take screenshots of all the account windows on the Mini. You can then use those to enter the info when setting up Mail on the new iMac.
After Mail is set up, quit Mail. Go to the location outlined by Antonio (Users-Library-Mail) and compare the folders with the folders from the old Mail app; i.e. the new Inbox folder should be empty -> remove that (drag to trash) and replace it with your old Inbox folder (same with Sent, etc). If you have old folders not found in the new location, add them.
When done, open Mail and your folders and emails should all be there. -
BOPF, how to transfer BOs from one system to another using ZSAPLINK.
Hi,
Is there a ways to transfer the local objects created using BOPF from one system to another using ZSAPLINK?
Thanks and Regards,
Vineet.Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK. -
How to move files from one system to another in plsql
Hi all,
I want to move file from one system to another using plsql procedure .
Kindly let me know what package i have to use for doing this .
Thanks,
P Prakash
Edited by: prakash on Jul 27, 2011 2:20 AM
Edited by: prakash on Jul 27, 2011 2:59 AMBluShadow wrote:
That's ok if you want to diet. ;)Ooh look, the strange punctuation is back. Can it be true that the forum software has caught up with the '80s?
I almost feel like connecting to the internet using a 9600 baud modem to celebrate.
http://upload.wikimedia.org/wikipedia/commons/5/5d/TeleGuide-terminal.jpg
Colon dash right bracket.
(Old habits die hard) -
File transfer from one system to another system
How can I use ODI to do file transfer from one system to another system ?
Do I need to create Models or I have to simply use Jython procedure/script to do the same ? Kindly help. I have done DB to DB using Knowledge Modules. But I am not able to understand this piece.
Kindly help.If you are asking about file transfer use ODI FTP tool to do it. If you are asking about file transformation..
You can not do file transformation directly in ODI like we do in any other ETL tool like data stage or Ab Initio.. File transformation in ODI can be done using staging database in an interface(i.e ELT way).
Create source and target data stores for the file to be transformed. Create an interface using File to SQL LKM to load the file into staging database and then use SQL to File Integration knowledge module.
Thanks,
D -
How can i copy apps from one computer to another?
how can i copy apps from one computer to another?
You don't mention which operating system you have so it's difficult to provide an answer since the mac and Windows stores the files differently.
The other thing you can do is just re-download the apps from the iTunes Store. Just login to the iTunes Store on the other computer using the same Apple ID. On the right-hand side of the iTunes Store page you will see a 'Purchased' link. Clicking on that will take you to a page that will list your past purchases which you can re-download to the new computer. -
How can I transport data from one client to another client?
How can I transport data from one client to another client?
Regards,
Subhohmmm, CTS = cutomizing transport?
If you have a customizing table, there are still two possibilities.
1. customize in DEV system and transport
2. customize right there where you need it.
this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2. -
How can we transfer stock from one vendor to another vendor?
Dear Gurus,
How can we transfer stock from one vendor to another vendor?
pls tell the steps to follow..
Thanks..This is the Normal Third Party Sub Contracting
Follow these steps
If components to be provided to a vendor are supplied not by your company but by a third-party, you can order the components from the third-party and specify the subcontractor in the purchase order as the delivery address. At goods receipt the components are posted directly to the stock of the material provided to vendor.
Entering a Purchase Order for Components
To order components for a subcontract order from a vendor and have them delivered direct to the subcontractor, enter a standard purchase order with a different delivery address:
From the Purchasing menu, choose Purchase order ® Create ® Vendor known.
Maintain the data on the initial screen. Make sure you enter the vendor of the components and the plant concerned.
Enter the items.
Then choose Item ® More functions ® Delivery address.
A dialog box appears in which you enter the delivery address.
In the field Vendor enter the number of the subcontractor and select the SC vendor box.
Selecting the box causes the components at goods receipt to be posted directly to the stock of the material provided to vendor when the goods receipt is posted.
Save the purchase order.
Posting the Goods Receipt of the Components
If the subcontractor lets you know that the components have arrived, you can enter the goods receipt for the purchase order. The components are posted directly to the stock of the material provided to vendor.
Stock Update
A goods receipt posting has the following results in the system:
the stock of material provided to vendor at plant level is increased. The stock of material provided to vendor is not managed at storage location level, since the stock is no longer stored at your company.
Valuated stock at plant level increases.
Documents
An accounting document is created for the material document.
After this normal subcontracting order for finished product.
Maybe you are looking for
-
I have an applet embeded in a JSP page. In this applet I have some text feilds for data entry. After the each data entry this field get validated . If the entered data is wrong then it popup a message using the JOptionPane. Now the problem. :- after
-
Getting the Lync 2010 client to use 2013 Persistent Chat
We are migrating to Lync 2013 from 2010 and just testing the 2013 environment right now with a few users. Only thing left I need to configure is getting the Lync 2010 client to connect to the 2013 Persistent Chat server. Most of our users are Windows
-
Ipad screen broken....internally?
Ok so here's what happened. I accidentally dropped my ipad yesterday on the ground. When it landed on the ground, the glass on my screen looked just fine, but then i noticed an internal crack. On the side with the internal crack, my sensor will not w
-
hi, we have batch determination in delivery but the delivery are able to pick the same batch which the quantity already been allocated to other deliveries, causing error when goods issue of the delivery. We are using the ATC check group of daily
-
Stock Transfer delivery pending for Invoice (ZF8) Type
Hi How i can see pending delivery for invoice type ZF8. Please tell a T code for the same. Thanks Karamvir Kauhsik