How to do data migration between single node and multi node HANA systems ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

Similar Messages

How can we do the data migration between Oracle Applications and SAP R/3.

Hi All,
How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
Awaiting for best possible solution.
Thanks in advance.
Regards
Dharmaraju

the 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.

PLS-00497: cannot mix between single row and multi-row (BULK) in INTO list

Hi,
I have a requirement to send a table data through mail,
so am using execute statement after opening the connection and am using the following PLSQL code, which am failing to execute successfully.
My code goes like this.
    0            10            20           30           40            50
1 CREATE OR REPLACE PROCEDURE SEND_TABLE_DATA( FROMAD IN VARCHAR2,
2   TOAD IN VARCHAR2,
3   SUBJECT IN VARCHAR2,
4   MESSAGE IN VARCHAR2,
5   DOCID IN VARCHAR2,
6   DOCDT IN DATE,
7   PRODOAID IN NUMBER )
8   AS
9   BATCHNO VARCHAR2(32767);
10 PCSBOX NUMBER;
11 AMOUNT NUMBER;
12 SMTPHOST VARCHAR2(255) := 'XXX.XXX.X.XXX' ;
13 A UTL_SMTP.CONNECTION ;
14 BEGIN
15 A :=UTL_SMTP.OPEN_CONNECTION(SMTPHOST,25);
16 UTL_SMTP.HELO(A,SMTPHOST);
17 UTL_SMTP.MAIL(A,FROMAD);
18 UTL_SMTP.RCPT(A,TOAD);
19 UTL_SMTP.OPEN_DATA(A);
20 UTL_SMTP.WRITE_DATA(A, CHR(13) ||CHR(13) || CHR(13) );
21 UTL_SMTP.WRITE_DATA (A,'Date: '|| TO_CHAR(SYSDATE,'DD/MM/YYYY HH24:MI:SS') || CHR(13) );
22 UTL_SMTP.WRITE_DATA(A,'From: '||FROMAD|| CHR(13) );
23 UTL_SMTP.WRITE_DATA(A, 'To: '||TOAD|| CHR(13) );
24 UTL_SMTP.WRITE_DATA(A, 'Subject: '|| SUBJECT || CHR(13) );
25 UTL_SMTP.WRITE_DATA(A,MESSAGE||DOCID||' Documented on '||DOCDT||CHR(13) );
26 UTL_SMTP.WRITE_DATA(A,CHR(13) || CHR(13) || CHR(13) );
27 UTL_SMTP.WRITE_DATA(A,'This is for your information'||CHR(13) );
28 UTL_SMTP.WRITE_DATA (A,' BATCHNO '|| ' -- '||' PCSBOX '||' -- '||' AMOUNT '||CHR(13) );
29 EXECUTE IMMEDIATE
30         'SELECT
31       A.BATCHNO,B.PCSBOX,B.AMOUNT
32        FROM
33      SCHEMA1.TABLEX A,SCHEMA2.TABLEY B
34        WHERE
35       A.BATCHID=B.BATCHNO AND B.PRODOAID='|| PRODOAID
36     BULK COLLECT INTO BATCHNO,PCSBOX,AMOUNT;
37 FOR indx IN 1..BATCHNO.COUNT
38   LOOP
39    UTL_SMTP.WRITE_DATA (A,BATCHNO(indx)|| ' -- '||PCSBOX(indx)||' -- '||AMOUNT(indx)||CHR(13) );
40   END LOOP;
41 UTL_SMTP.WRITE_DATA( A,CHR(13) || CHR(13) || CHR(13) );
42 UTL_SMTP.CLOSE_DATA(A);
43 UTL_SMTP.QUIT(A);
44 EXCEPTION
45 WHEN OTHERS THEN
46 UTL_SMTP.QUIT(A);
47 RAISE;
48 END;
49 /
SELECT * FROM USER_ERRORS
NAME                       TYPE             SEQUENCE    LINE         POSITION        TEXT                                                                                                             ATTRIBUTE                 MESSAGE_NUMBER
SEND_TABLE_DATA
PROCEDURE
3
37
1
PL/SQL: Statement ignored
ERROR
0
SEND_TABLE_DATA
PROCEDURE
2
37
24
PLS-00487: Invalid reference to variable 'BATCHNO'
ERROR
487
SEND_TABLE_DATA
PROCEDURE
1
36
25
PLS-00497: cannot mix between single row and multi-row (BULK) in INTO list
ERROR
497
Thanks In Advance
Regards
Pradeep.

> 29 EXECUTE IMMEDIATE
> 30         'SELECT
> 31       A.BATCHNO,B.PCSBOX,B.AMOUNT
> 32        FROM
> 33      SCHEMA1.TABLEX A,SCHEMA2.TABLEY B
> 34        WHERE
> 35       A.BATCHID=B.BATCHNO AND B.PRODOAID='|| PRODOAID
> 36     BULK COLLECT INTO BATCHNO,PCSBOX,AMOUNT;
The variables BATCHNO, PCSBOX and AMOUNT are defined as scalar variables. Check there definition
> 9   BATCHNO VARCHAR2(32767);
> 10 PCSBOX NUMBER;
> 11 AMOUNT NUMBER;
You cannot use BULK COLLECT on scalar variables. The variables must be defined as a COLLECTION TYPE in order to perform bulk collect.

DIFFERENCE BETWEEN SINGLE LEVEL AND MULTI LEVEL COSTING

Sir,'
Please explain the difference between Single Level and Multi Level Costing in Detail
thanking You

While using material ledger, we can use the single level or multi-level price determination for valuation of inventory.
Procurement processes are used in Product Cost Controlling to determine procurement costs and to present those costs. Purchase Order, for example, is single-level procurement and Production is multilevel procurement.
Single-level material price determination calculates the periodic unit price for a material. The standard price and the cumulative single-level differences of the period are taken into account. Single-level material price determination takes into account the differences that arise directly when a material is procured.
Multilevel price determination calculates the periodic unit price for a material. The standard price, the single-level differences cumulated in the period, the differences between planned and actual prices, as well as input material differences (multilevel differences) are all taken into account.
Single-level material price determination is a prerequisite for Multi-level price determination.

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?
Many thanks for any advice.
David

You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

What is difference between local variable and property node ?

What is difference between local variable and property node ?
" 一天到晚游泳的鱼"
[email protected]
我的个人网站：LabVIEW——北方客栈 http://www.labview365.com
欢迎加入《LabVIEW编程思想》组——http://decibel.ni.com/content/groups/thinking-in-labview

To make things clear, here are two small examples that show how nasty locals and value properties can be to the naive programmer.
- Open the diagram of the race condition.vi before running it and try to predict what will be the values of the two counters after the third run.
- Use the Compare Locals Properties and Wires.vi to find out how slow locals and value properties can be (times 1000+).
This being demonstrated, I must add that I use globals and value properties quite often, because they are often very convenient
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Race condition.vi ‏9 KB
Compare Locals Properties and Wires.vi ‏18 KB

How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS

Hi
I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
Does anybody know where this file went or can somebody tell me an alternative place to get this file?
Jacob

Please open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
Hope that works!
Elise

Data reconciliation between R/3 and the BW Systems

How do we do data reconciliation between R/3 and the BW system for the following areas?
Purchasing
Controlling:
Project System:
COPA
SD
AP
Trgards,
Tony G

Tony
Have you looked these documents??
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20validate%20infocube%20data%20by%20comparing%20it%20with%20psa%20data
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Re: BW v. R/3 data reconciliation
Hope this helps
Thanks
Sat

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

I'm a Dropbox user and I migrate between my iMac and a Toshiba notebook. Is there Apple software that will work on the notebook allowing me to open Pages, Numbers or Keynote documents that I've placed in Dropbox?

I'm a Dropbox user and I migrate between my iMac and a Toshiba notebook. Anyone know if there is Apple software that will work on the Toshiba that will allow me to open Pages, Numbers or Keynote documents when I access them in Dropbox?
Maybe I should just always export from Pages into Word (and likewise for the other types) before I upload to Dropbox? I hope not!!

If you don't want to export files and consider the Microsoft formats to be your basic working format, then you need to consider either using MsOffice for Mac or LibreOffice instead of the iWork suite.
You could always run a virtualised OSX on the Toshiba, but I don't think Apple will appreciate me telling you how to do that.
Peter

How to Create Instances in the Transient Root Node and Sub Nodes from Root Node Query Method ?

Hi All,
I am Creating a BOPF BO with 3 Nodes,
Node 1) ROOT -- > contains a query,
using Root Node I have created Search UIBB Configuration in FBI.
In testing -- > when i enter Data in the Search Criteria Fields am able to get the details in to the query method
from Imporing parameter : 'IT_SELECTION_PARAMETERS'.
HERE I am fetching data from a standard table and trying to fill the data in the Node : 'MNR_SEARCH_RESULT'.
How to Append data to the Sub node 'MNR_SEARCH_RESULT' when there is no Node instance created in the ROOT Node ?
For This I have created an instance in the ROOT Node and Using that I tried to create Instance in the Sub Node 'MNR_SEARCH_RESULT'.
Below is my code which i have placed in the Query method ..
DATA : LR_DATA TYPE REF TO ZBO_S_ROOT1.
DATA : LR_SEARCH_RES TYPE REF TO ZBO_S_MNR_SEARCH_RESULT.
DATA : LO_CI_SERVICE_MANAGER TYPE REF TO /BOBF/IF_TRA_SERVICE_MANAGER,
        LO_TRANSACTION_MANAGER TYPE REF TO /BOBF/IF_TRA_TRANSACTION_MGR.
   LO_CI_SERVICE_MANAGER = /BOBF/CL_TRA_SERV_MGR_FACTORY=>GET_SERVICE_MANAGER( IV_BO_KEY = ZIF_BO_TEST_PO_C=>SC_BO_KEY ).
   LO_TRANSACTION_MANAGER = /BOBF/CL_TRA_TRANS_MGR_FACTORY=>GET_TRANSACTION_MANAGER( ).
CREATE DATA LR_DATA.
LR_DATA->KEY = LO_CI_SERVICE_MANAGER->GET_NEW_KEY( ).
LR_DATA->ROOT_KEY   = IS_CTX-ROOT_NODE_KEY.
LR_DATA->PIPO_MAT_ID = '100100'.
LR_DATA->PIPO_MAT_DESC = 'MATERIAL'.
LR_DATA->PIPO_SPRAS = 'E'.
LR_DATA->PIPO_MATL_TYPE = 'ZPMI'.
LR_DATA->PIPO_MATL_GROUP = 'ZKK'.
     DATA lt_mod      TYPE /bobf/t_frw_modification.
     DATA lo_change   TYPE REF TO /bobf/if_tra_change.
     DATA lo_message TYPE REF TO /bobf/if_frw_message.
     FIELD-SYMBOLS: <ls_mod> LIKE LINE OF lt_mod.
    APPEND INITIAL LINE TO lt_mod ASSIGNING <ls_mod> .
    <ls_mod>-node        =   ZIF_BO_TEST_PO_C=>sc_node-ROOT.
    <ls_mod>-change_mode = /bobf/if_frw_c=>sc_modify_create.
    <ls_mod>-key         = LR_DATA->KEY.
    <ls_mod>-data        = LR_DATA.
DATA : LT_CHG_FIELDS TYPE /BOBF/T_FRW_NAME.
DATA : LS_CHG_FIELDS LIKE LINE OF LT_CHG_FIELDS.
DATA : LV_KEY TYPE /BOBF/CONF_KEY.
CALL METHOD IO_MODIFY->CREATE
   EXPORTING
     IV_NODE            = ZIF_BO_TEST_PO_C=>sc_node-ROOT
     IV_KEY             = LR_DATA->KEY
     IS_DATA            = LR_DATA
     IV_ROOT_KEY        = IS_CTX-ROOT_NODE_KEY
   IMPORTING
     EV_KEY             = LV_KEY .
CREATE DATA LR_SEARCH_RES.
LR_SEARCH_RES->KEY           = LO_CI_SERVICE_MANAGER->GET_NEW_KEY( )..
LR_SEARCH_RES->PARENT_KEY    = LV_KEY.
LR_SEARCH_RES->ROOT_KEY    = LV_KEY.
LR_SEARCH_RES->MATNR    = '123'.
LR_SEARCH_RES->ERSDA    = SY-DATUM.
LR_SEARCH_RES->ERNAM    = SY-UNAME.
**LR_SEARCH_RES->LAEDA    = .
**LR_SEARCH_RES->AENAM    = .
**LR_SEARCH_RES->VPSTA    = .
*LR_SEARCH_RES->LVORM    = .
LR_SEARCH_RES->MTART    = 'ZPI'.
LR_SEARCH_RES->MBRSH    = 'ZTP' .
LR_SEARCH_RES->MATKL    = 'MAT'.
**LR_SEARCH_RES->BISMT    = ''
**LR_SEARCH_RES->MEINS    =
CALL METHOD io_modify->create
           EXPORTING
             iv_node            = ZIF_BO_TEST_PO_C=>sc_node-MNR_SEARCH_RESULT
             is_data            = LR_SEARCH_RES
             iv_assoc_key       = ZIF_BO_TEST_PO_C=>sc_association-root-MNR_SEARCH_RESULT
             iv_source_node_key = ZIF_BO_TEST_PO_C=>sc_node-root
             iv_source_key      = LV_KEY
             iv_root_key        = LV_KEY.
I am Unable to set data to the Node . I did not get any error message or Dump while executing . when i tried to retrive data I got the details from the node but am unable to view those details in the FBI UI and BOBT UI while testing .
Please provide your valuable Suggestions.
Thanks in Adv.
Thanks ,
Kranthi Kumar M.

Hi Kranthi,
For your requirement you need only two nodes. Root Node and Result node. Use the same structure for both.
To create Instance while search.
Create Query method with input type which has the required fields for selection criteria.
Fetch the data and create instance in the root node.
Pass the new instance key as exporting parameter form Query Method.
To Move data from ROOT to Result.
Create a action at root node.
Write a code to create new entries in Result node.
Then configure the Search UIBB and display result in List UIBB. Add button and assign the action MOVE_MAT_2_RESULT.
Create another List uibb to display data from Result node.
Connect the UIBBs using wire schema. SEARCH -> LIST(ROOT) ---> LIST(RESULT).
Give src node association for ROOT to RESULT Configuration.
Regards,
Sunil

Migration between ISOCORS directory and vendor supported directory

How can we migrate between ISOCORS directory and vendor supported directory?

You can use a few products, such as iPlanet Meta Directory, or ISOCOR Meta
Directory. These provide 2 way synch between diff LDAP products. Or, you can go
to http://mozilla.org and write some scripts to do this yourself, using PERLdap.
--Will
Vijay Patil wrote:
How can we migrate between ISOCORS directory and vendor supported directory?

How to calculate the ratio between the maximum and minimum peaks of the two waves using two looping to find the value of SPO2?

hello everyone,
i'm rai from indonesia
I have a final project about pulse oximetriy, I have some problems,
how to calculate the ratio between the maximum and minimum peaks of the two waves using two while loops to calculate SpO2 ?
My program image can be seen below predicament ?
Attachments:
spo2 akusisi data with filter lpf hpf smoot nilai max min ir merah.vi ‏249 KB
spo2 akusisi data with filter lpf hpf smoot nilai max min ir merah.vi ‏249 KB

Hi rai,
I would appreciate it as kind of respect for forum participants if you would clean up your VI before uploading it (or images of its block diagram)…
That being said:
- Your inner while loops each run exactly twice. Replace them with FOR loops!
- Lots of unneeded operations, mainly induced by ExpressVI usage. Is there a reason to convert to DDT and immediately convert back to 1D array?
- You already calculate some Min/Max values. Ratio is just a division of two values…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to calculate the ratio between the maximum and minimum peaks of the two waves using two while loops?

hello everyone,
i'm rai from indonesia
I have a final project about pulse oximetriy, I have some problems,
how to calculate the ratio between the maximum and minimum peaks of the two waves using two while loops to calculate SpO2 ?
My program image can be seen below predicament ?
Attachments:
spo2 akusisi data with filter lpf hpf smoot nilai max min ir merah.vi ‏249 KB

Hi Rai,
You should post this into the LabVIEW forum rather than Real-Time since this isn't a Real-Time application. Your post will see more replies in the LabVIEW forum.
As far as your question is concerned, you can write the max and min from the respective loops to a local variable to send the data out of the loops to a third loop or just do the calculation in one of the loops. This would be ideal if you're trying to do this while the loop is running.
-Jayk
Applications Engineering
National Instruments

How to do data migration between single node and multi node HANA systems ?

Similar Messages

Maybe you are looking for