How to do data validation after each load

Hi all,
How to do data validation after each load.
please send to : [email protected]
bhaskar

Hi Bhaskar,
Check these posts:
Re: Validation of data in BW?
Re: validate data
Bye
Dinesh

Similar Messages

How the CRM data is transferred (initial load) to TREX server in CRM EHP1

Hi Guru's
I am working on HV segmentation first time and would like to know, how the CRM data is transferred (initial load) to TREX server in CRM EHP1, if we create the 'Data source for HV - Attribute set / Inforset' will that transfer the data to TREX server or do we need to perform Initial load by execute by batch program / Transaction.
For the update (delta load) is the program : CRM_MKTTG_TREX_UPDATE to update the BP data, can we also add other objects (Transactional data) for delta load.
Regards,
Ajay Kumar

Hi Ajay,
Yes you are right the Report CRM_MKTTG_TREX_UPDATE is used for Full load (inital load) for HV segmentation data.
Both Full and Delta load is suggested to be performed in background. You can use the options "Business partners" and "Marketing permissions". For BP's you can use Delta upload with further options:
Synchonize Business Partners Beforehand
Force Update
Offset for Delta Table Entries (in sec.)
You can also "Define Delta Source Objects for High Volume Segmentation" in SPRO > MKT > HV segmentation.
Here you can set relevant data source objects that is available for delta upload.
For more details refer to documentation next to the customization entry.
Hope this information helps you.
Regards,
Anup

How to execute a method after page Load?

My question is very similar to what was discussed in following thread:
How to execute a method after page Load?
My requirement is that I want to run a method in backing bean of a page, immediately after the page gets loaded. In that method I want to invoke one of the method action included in the pagedef of this page, conditionally.
I tried using the approach given in the above thread, i.e to use <f:view afterPhase="#{backing_security.setPermPriv}">, but the problem is that our page is not using 'f:view' , so I explicitly added one f:view with afterPhase property set , but it is not working, page it self is not getting loaded, it is throwing the error:
Root cause of ServletException.
java.lang.IllegalStateException: <f:view> was not present on this page; tag [email protected]e8encountered without an <f:view> being processed.
     at org.apache.myfaces.trinidad.webapp.UIXComponentELTag.setProperties(UIXComponentELTag.java:108)
     at javax.faces.webapp.UIComponentClassicTagBase.findComponent(UIComponentClassicTagBase.java:733)
     at javax.faces.webapp.UIComponentClassicTagBase.doStartTag(UIComponentClassicTagBase.java:1354)
     at org.apache.myfaces.trinidad.webapp.UIXComponentELTag.doStartTag(UIXComponentELTag.java:71)
     at oracle.adfinternal.view.faces.taglib.UIXQueryTag.doStartTag(UIXQueryTag.java:41)
     at oracle.adfinternal.view.faces.unified.taglib.UnifiedQueryTag.doStartTag(UnifiedQueryTag.java:51)
     at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:50)
     at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:262)
     at oracle.jsp.runtime.tree.OracleJspNode.execute(OracleJspNode.java:89)
     at oracle.jsp.runtimev2.ShortCutServlet._jspService(ShortCutServlet.java:89)
     at oracle.jsp.runtime.OracleJspBase.service(OracleJspBase.java:29)
     at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:665)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:387)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:822)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:746)
Please help to resolve this issue, or am I doing anything wrong?

Hi,
I assume that your view is a page fragment and here - indeed - the f:view tag cannot be used. If you use ADF then one option would be to use a custom RegionController on the binding layer to listen for the render phase to invoke the method. Another option would be to use a hidden field (output text set to display="false" and have this component value referencing a managed bean property. The managed bean property's getter method can now be used to invoke the method you want to run upon view rendering
Frank

Schedule line date changes after each MRP run

Dear Experts,
Clarification needed on how the system plans the MM schedule lines.
Setting: Start in the past not allowed.
3 days for processing of order
The issue is after each MRP run the system is moving the schedule line to the current date + 3 days for processing + the planned delivery time.
If the schedule line is not firmed, after each MRP run ( which happens everyday) the system is moving the schedule line and then giving an alert saying the " order has to be rescheduled to the previous day"
on the second day after the mrp run the system moves the schedule line again by one more day and gives the rescheduling date as " -2 days from today"
this change is happening every day after the planning run. - because of this there are really no backorders ( schedule line in the past ) in the system. we were not able to know if the vendor is actually delayed in this case.
can you kindly suggest what went wrong here ??
we are using strategy 10 for the planning of procured parts. Let me know if more info is needed.
Note: we are also using stock transfer process for some procured parts. there too the PR date gets changed after each MRP run. There there is no lead time in this case. the order is placed on the same day as the requirement as both plants are nearby. There the PR date is changing everyday to the current date.
your advice would be of great help
thanks
Nagendra Kumar

Hi Caetano,
thanks for your suggestion
Yes, we use firm zone for few of the vendors. there the system don't change the schedule lines.
Also for the stock transfer PR's there is no firm zone and the lead time is one day. in this case it changes everyday after the MRP run.
the stock transfer PR's leads to the creation of Schedule lines from the source plant. Since this PR gets changed everyday. the alerts coming out of MD07 gets changed and we really did not know if this order is delayed or not. In the source plant we use the firm zone to avoid moving the schedule line. But then the alerts are always not correct.
is there any setting which helps in not moving the PR everyday without using " start in the past"
thanks
Nagendra Kumar

How to setup data validation mechanism

Hi, gurus,
Now our customer wants to do data cleansing before loading data into infocube or ods, the source system includes R/3, flat file, and some legacy systems. However the client wants to create a staging area to keep incoming data, and develop some programming to check data validation. The specific requirement is as following:
1. Provider a user interface to let biz man to correct the error record;
2. can code logic to check the data rejection reason, such as field type is wrong, master data doesn't exist, and etc, and can prompt these reason message to assist business guy correct;
They want to create a specific staging for data cleansing purpose, and because refer to my prior experience with some ETL tools, we can ask developer to write embeded program in informatica or datastage to check data quality and write down the rejection reason in a file to assist business man correct;
so if we want to use SAP BW PSA for this purpose, is it feasible? Can we modify PSA to add one column, 'rejection reason' and add some ABAP program here; or you guys have some other good options for this function.
and can we use PSA to keep all data for 5 years? because the annual delta data is not very big, just 4G.
Someone suggests to create Z table in BW system for staging purpose, however this solution can not use BW ETL tool to load data but need heavy ABAP programming, so any good solution on this?
BTW: can I modify PSA structure to add 1 or 2 column, such as reject reason?
and how to use abap program to access Characteristics master data? are there any function module to read master data directly rather than select data from P table or T table?
Regards, ls

I think if the business guy is given some basic BW training and some aspects about correcting PSA records or adding or loading missing master data,then it can work.
The BW monitor does give you good enough messages about the data load errors.
I do not think it is good to modify the PSA..because this is against purpose of having PSA.PSA has records in transfer structure format,as sent by source system.
PSA is often preserved for data reloads that might be needed some point in future.
As u r saying that annual record load is not big,u can preserve PSA and then later develop a custom program to delete PSA's older than..say 2-3 years..(there might a std program for this).
Modifying or adding columns to PSA is not general practice.
For reading master data maybe u can use this fn module..RSAU_READ_MASTER_DATA.

How to do date validation in Web Dynpro java

Hi
We have one requirement that One input field with date type is there.When we take Date type input field then in web dynpro Date navigater is appearing by default.Our requirement is if user enters the date manually in the input filed instead of chossing the date from the Date navigator then how we will do the following date validations manually:
a. If user is entering the date in any format then it should convert it to dd.mm.yy format.
b. How to do leap year validation?Suppose user is entering   29.02.20007 then it should display Invalid date.
c. How to do the follwing date validation:
    Let's say that current running hours(Text Vie
w) on a given engine is 100, entered on 10-Jun-2008(Running hour date-Text view)).
-On 15-Jun-2008(New Running Hour Date-input field), I try to enter a value of 300 hours(New running hour-input field).
-This is impossible, because only 5x24=120 hrs has passed from the previous update.
-Hence, in this case the maximum value I can enter is 100+120=220.
Can anybody help me in solving the above 3 date validation?

Hi Susmita,
For your 3 rd requirement...
Initially you will be storing the first date entered by the user right???
Say that date is D1. and user entered hours is H1.
now after some days at day D2 user again trying to enter some hours say H2. Now you have to restrict user from entering hours which are
greater than 24*D2-D1....
so now you have to get D2-D1....
For this....
long l1=youdate1.getTime();   // This will convert your Date D1 into long...
then,
Date d=new Date(System.currentTimeMillis());
long l2=d.getTime(); //which is a long value of current date...
So Now l2-l1 will give you number of days between past date and today's date...
So On Save you check for
if((l2-l1)*24<(H2-H1))
message("Please enter valied number of hours");
Hope this will help you....
Regards,
Srinivas.

Text input - how set an automated space after each word?

When typing in text and using the qwerty assisted text - how can i get it to automatically add a space after each word? My Droid original did that automatically... Thanks

lovetennis7 wrote:
When typing in text and using the qwerty assisted text - how can i get it to automatically add a space after each word? My Droid original did that automatically... Thanks
I have confirmed that this feature was not included with the basic software package of the Incredible 2.

How to Extract Data from SAP and Load it into Essbase

Hi All,
Can you recommend some ways to extract data from SAP and load it into Essbase?. I have no knowledge about SAP, not sure how I can perform this task. Can I use ODI for this job?
Thanks

hi,
Not sure if this helps but give a try
you can create connection from EAS to SAP .. using a plug-in .. if you have access to oracle Support go for [ID 968961.1]
or
below are steps
1. In EASPATH\console, open components.xml in a text editor.
2. Under <PluginList>, enter <Plugin archiveName="SAP" packageName="com.essbase.eas.sap.ui"/> before the closing </PlugIn> tag.
3. Save and close the file.
4. In EASPATH\console\bin, open admincon.lax in a text editor.
5. Search for lax.class.path= and append ;..\lib\sap_client.jar;..\lib \sap_common.jar to the entry. Save and close the file.
6. In EASPATH\server\bin, open adminsvr.lax in a text editor.
7. Search for lax.nl.java.option.additional, and append -DRFC_INI=EASPATH\server\saprfc.ini. Save and close the file.
8. Create a new environment variable, RFC_INI, with a value of EASPATH\server\saprfc.ini
9. Copy librfc.dll andsapjcorfc.dll to EASPATH\server\bin. You may need to obtain these files from SAP.
let me know if it works :)

How to draw a line after i load a frame?

its simple to draw a line before i load the frame..
when i try to draw a line after i load the frame, i get a error in the last line of the lauchFrame method..
the error is "java.awt.Graphics is abstract; cannot be instantiated"
import java.awt.*;
class GraphArea extends Panel
    public void paint(Graphics g)
        g.setColor(Color.BLUE);
        g.drawLine(0,0,250,250);
    public void paint(Graphics g,int X1, int X2)
        g.drawLine(0,0,X1,X2);
class Grapherv1 {
private Frame f;
private GraphArea drawPanel;
public Grapherv1() {
    f = new Frame("Drawing Shapes:Lenin");
    drawPanel = new GraphArea();
public void launchFrame() {
      f.setLayout(new FlowLayout());
      drawPanel.setSize(950,550);
      drawPanel.setBackground(new Color(220,220,220));
      drawPanel.setLayout(null);
     f.setBackground(Color.white);
      f.add(drawPanel);
    f.pack();
    f.setSize(1000, 800);
    f.setVisible(true);
    drawPanel.paint(new Graphics(),100,100);
public static void main(String args[]) throws InterruptedException {
      Grapherv1 gui = new Grapherv1();
    gui.launchFrame();
}please tell me how to call this method ...
public void paint(Graphics g,int X1, int X2)
what argument i should pass for Graphics??
Edited by: Tall-Dude on Dec 3, 2007 4:33 PM
Edited by: Tall-Dude on Dec 3, 2007 4:33 PM

Tall-Dude wrote:
please tell me how to call this method ...
public void paint(Graphics g,int X1, int X2)just past the new x1 and x2 and repaint no need to pass the graphics.
e.g.
import java.awt.*;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
class Grapherv1 {
    private Frame f;
    private GraphArea drawPanel;
    public Grapherv1() {
        f = new Frame("Drawing Shapes:Lenin");
        drawPanel = new GraphArea();
    public void launchFrame() {
        f.addWindowListener(new WindowAdapter() {
            public void windowClosing(WindowEvent e) {
                System.exit(0);
        f.setLayout(new BorderLayout());
        drawPanel.setSize(950,550);
        drawPanel.setBackground(new Color(220,220,220));
        drawPanel.setLayout(null);
        f.setBackground(Color.white);
        f.add(drawPanel);
        f.pack();
        f.setSize(1000, 800);
        f.setVisible(true);
        drawPanel.redraw(300,400);
    public static void main(String args[]) throws InterruptedException {
        Grapherv1 gui = new Grapherv1();
        gui.launchFrame();
    class GraphArea extends Panel {
        int x1, x2;
        public void paint(Graphics g) {
            g.setColor(Color.BLUE);
            g.drawLine(0,0,x1,x2);
        public void redraw(int X1, int X2) {
            x1 = X1;
            x2 = X2;
            repaint();
}

Sharepoint 2013 and SSRS how to send reports on date schedule after dw load completes

Certainly with subscriptions we can generate a SSRS report on a schedule like say every Monday morning at 5 AM PT. My problem is I want to run those reports but I want to make sure the Datawarehouse completed its load first. Example if
for some reason the DW breaks at 4 AM and does not finish the load the Reports should not run. ONce the DW is finished then reports should run. The 5 AM is really a place holder for 1st attempt to send reports. It should keep trying until
it can send them or Tuesday comes around.
the only approach I can think of is via the DW with a job and stored procedure you could have it exec anything you want. Is it possible to exec the reporting services report from sql? Is there a way from within sharepoint?
Ken Craig

Hi Ken,
According to your you want to fire the SQL Server Reporting Services after the Data Warehouse load data completed, right?
By default, when a subscription is created, a corresponding SQL Server agent job is created meanwhile. The SQL Server agent job has the same schedule with the shared schedule or report-specific schedule that is using by the subscription.
The corresponding SQL Server agent job calls stored procedure AddEvent to add an event in SSRS. Then the SSRS notification service fetches the event from SSRS database to deliver the subscription.
That, we can configure regular shared schedule or report-specific schedule based on the irregular schedule. So in your scenario, you can configure the job steps to fire the subscription after the Data Warehouse load data completed. For the details, please
refer to the links below.
http://social.msdn.microsoft.com/Forums/en-US/32bc6d2d-5baa-4e27-9267-96a4bb90d5ec/forum-faq-how-to-configure-an-irregular-schedule-for-report-subscription?forum=sqlreportingservices
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

How syncronize with the data base after pre-loading the data

Hi,
I have pre-loaded the data from the database table into the cache.
If the key is not found in the cache i want to it to connect to database and get the value from the table. How to achieve this?

Hi JK,
I have pasted my cache loader code, config file and the main class in the other post but i m not sure what is the issue with it. Its not working. Please can you tell me what might be the issue with that piece of code. I m not getting any exception either but the load() or loadAll() method is not at all getting triggered on invoking cache.get() or cache.getAll() method. What might be the cause for this issue?
Can you give me the coherence-cache-config.xml contents?
I m not sure whether its the issue with the config file because i have read some where that refreshaheadfactor is required to trigger the loadAll() method.
Edited by: 943300 on Jul 4, 2012 9:57 AM

Data recovery after "replace" load

Hi all,
we have lost data in HFM application by loading data using "replace" mode.
Is it possible to recover lost data? If yes, how?
Thanks,
Vlado

Hi Vlado,
It's possible but only if you have backup.
Regards,
Marcin Kuzdra

How to apply Date condition for each month in 12 month period to my SQL query

I am trying to retrieve all Outstanding Problem tickets in my Trendline SSRS report.
I need to pull the OpenDate <= Last day of last month And CloseDate >= 1st day of current month
for each month in the Last 12 months. How do I accomplish this in my query?
I must also need to pull the oustanding tickets for the next 11 months in the same query
where it will automatically pull the outstanding tickets for when a new month comes
in out of the 12 month period?
Here's a sample of my query to pull July 2013 Outstanding Problem tickets:
Select OpenDate, CloseDate, Ref_Num, Type, status
From Call_Req
Where OpenDate <= '2013-07-31 00:00:00' And CloseDate >= '2013-08-01 00:00:00'
And Type = 'P'
My Results:
OpenDate
CloseDate
Ref_Num
Type
status
6/13/2013 7:41
8/26/2013 12:41
P1726456FY13
P
CL
6/13/2013 8:17
8/23/2013 12:31
P1726612FY13
P
CL
6/13/2013 10:17
9/6/2013 16:54
P1727352FY13
P
CL
7/12/2013 10:46
9/6/2013 10:23
P1812568FY13
P
CL
7/18/2013 10:17
9/6/2013 8:53
P1830452FY13
P
CL
7/29/2013 15:54
9/6/2013 16:16
P1862906FY13
P
CL
5/17/2013 20:51
8/22/2013 9:09
P1653380FY13
P
CL
5/30/2013 13:29
8/26/2013 7:33
P1685693FY13
P
CL
7/15/2013 14:14
9/7/2013 9:42
P1818874FY13
P
CL
6/7/2013 15:49
9/6/2013 16:46
P1712265FY13
P
CL
7/18/2013 10:25
9/7/2013 9:18
P1830516FY13
P
CL
7/24/2013 16:30
8/12/2013 18:26
P1849909FY13
P
CL
Talitha Davis

Would this Work?
DECLARE @now DATE = GETDATE();
WITH months(lvl, daydate)
AS (
SELECT
1,
@now
UNION ALL
SELECT
lvl + 1,
DATEADD(MONTH, -1, daydate)
FROM months
WHERE lvl < 12
), dateranges(period, opendate, closedate)
AS (
SELECT
CAST(YEAR(daydate) AS CHAR(4))
+ '-'
+ RIGHT('0' + CAST(MONTH(daydate) AS varCHAR(2)), 2),
DATEADD(DAY, 0-DAY(daydate), daydate),
DATEADD(DAY, 1-DAY(daydate), daydate)
FROM months
SELECT
b.period,
a.OpenDate,
a.CloseDate,
a.Ref_Num,
a.Type,
a.status
From Call_Req a
INNER JOIN dateranges b
ON
a.OpenDate <= b.opendate
AND
a.CloseDate >= b.closedate
WHERE Type = 'P';
Microsoft Certified Trainer & MVP on SQL Server
Please "Propose as Answer" if you got an answer on your question, and vote for it as helpful to help other user's find a solution on a similar question quicker.

How to save a chart after each iteration in a for loop?

Hello,
I have written code which initializes a spectrometer. Once initialized, if the "Capture" button is pushed, the spectrometer takes a new spectrum three times (see for loop) every second. This spectrum is displayed as a chart in my front panel. My code runs fine...it will update the spectrum every second.
However, I want to be able to save each of these three iterations as separate graphs. Basically, I want to click "Capture" and have my code save three charts to a specified folder. How do I go about doing this?
I've attached my VI.
Thanks.
Solved!
Go to Solution.
Attachments:
Spectrometer Iteration.vi ‏444 KB

Use Build Array to make a 2D Array of your X and Y data and use Write To Spreadsheet File to save the data.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to do data validation before the submit by email

I am developing an offline interactive form. There is submit button inside, which should check all data and submit the form by email if checking passes.
My problem is that I can not cancel the submit event when the checking failed.
I use Adobe LiveCycle Designer 7.1.3284.
If I use Email Submit Button, I can do validation in presubmit event. But I can not cancel the event. Even there is error in validation, form is submitted anyway.
If I use normal button, I can do validation in Click event. But I can not submit form with code.
Is there anyone who has experience on this issue?
Best Regards,
Jun

in that case, you can code just one line in the change event of all fields of the form
xfa.form.form1.....button_validation.presence = "visible"
xfa.form.form1.....button_submit_by_email.presence = "hidden"
After click of validate button,
if validation is successful,
xfa.form.form1.....button_validation.presence = "hidden"
xfa.form.form1.....button_submit_by_email.presence = "visible"

How to do data validation after each load

Similar Messages

Maybe you are looking for