How to do frequency division to a external signal use the api with vc
i use the api and vc do frequency division.
and i choose the function DAQmxCreateCOPulseChanTicks
the problem is the parameter of sourceTermianl in DAQmxCreateCOPulseChanTicks
i just do not how to use it, please help me ,thanks
I can`t see your VI cause i've a lower version. I hope this VI to do what you want.
But now i have one question: Somebody knows why i get this message when i enable the disable diagram of the this vi? The message is attached, version is 8.0, winxp.
Paul
Mechatronic engineer
Lima-Perú
Attachments:
FOURIER_TIME_SCALING.vi 25 KB
msg.JPG 31 KB
Similar Messages
-
How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?
No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.
-
How do I access my external drive over the web with my iPhone. The drive is attached to my Time Machine. I am new to Apple and am trying to get all my stuff working together.
This is not a supported feature of iPhone or Time Capsule.
-
Cross Reference within external Database using XREF API
Hi Experts,
Can we do Cross Reference within external Database using XREF API uses JDBC to access the Oracle Database Stored Procedures in SAP PI? How to use a JNDI Data source to access the DB and how to do the Connection Pooling will be done by the SAP J2EE server? Kindly let me know step by step proceedings.
Regards
ArchanaHello Archana,
It can be done with a Lookup call in a mapping.
Here's a little article about the topic in the SAP wiki:
http://wiki.sdn.sap.com/wiki/display/XI/HowtouseCrossReferencewithinexternal+Database
With kind regards
Sebastian -
How Do I Use the API to Abbreviate?
How do I use the ACE API to limit the output field length and properly abbreviate the output field?
Using the pwace command-line application, I get abbreviated output that looks like this for a 30 byte field:
nnnnn GEORGE WASHNGTN MMRL HWY
However, when using the API, I end up with a truncated field:
nnnnn GEORGE WASHINGTON MEMORI
This is from the PRIM_ADDR field.
How do I use the API to get the same field value as the command-line application?
Thanks,
Rob
Edited by: rriggs on Jun 30, 2010 11:36 PMRob,
The jobfile product has intelligent truncation built into the product. However, with the API this would be up for the user to code around.
Thanks,
Brandon -
My iPad has to be really really close to the router for it to have internet. How can I make it so I can go around the house with it? My iPad has been like this for a couple of months, and it has really irritated me. My friend came over and he had to download iTunes for something on the computer. He needed my iPad, he tried it and it wasn't really near the router.
I'd begin by reviewing the following:
http://support.apple.com/kb/TS1398 -
How can I set up an older airport express using the newest airport utilities?
How can I set up an older airport express using the newest airport utilities? Seems like there isn't an option to set this up. Normally you could add/set up this in the airport setup assistant- but that doesn't exsist any longer.
Thanks for any suggestionsHow can I set up an older airport express using the newest airport utilities?
Unfortunately you can't, since Apple dropped support of the older AirPorts with AirPort Utility 6.x.
Using some workarounds....not supported by Apple.....you might be able to download and install an older version of AirPort Utility that would allow you to administer the older AirPort.
See this thread for more details and instructions:
https://discussions.apple.com/message/21397085#21397085 -
How do I scan multiple pages into one document using the CanoScan LiDE 200?
How do I scan multiple pages into one document using the CanoScan LiDE 200?
I can't seem to find a way to get them to scan continuously, or a way to stitch them together afterwards.Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
I just downloaded ios7 now i can only use the phone with the speaker, how can i fix this?
I just downloaded ios7 now i can only use the phone with speaker, how can i fix this?
x
-
How can i add custom attributes to a new Class Object using the API ?
Hello everyone,
Here is my problem. I just created a subclass of Document using the API (not XML), by creating a ClassObjectDefinition and a ClassObject. Here is the code :
// doc is an instance of Document
ClassObject co = doc.getClassObject();
ClassObjectDefinition cod = new ClassObjectDefinition(ifsSession);
cod.setSuperclass(co);
cod.setSuperclassName(co.getName());
cod.setName("MYDocument");
ClassObject c = (ClassObject)ifsSession.createSchemaObject(cod);
Everything seems to be OK since i can see the new class when i use ifsmgr. But my question is : how can i add custom attributes to this new class ? Here is what i tried :
AttributeDefinition value = new AttributeDefinition(ifsSession);
value.setAttribute("FOO", AttributeValue.newAttributeValue("bar"));
c.addAttribute(value);
But i got the following error message :
oracle.ifs.common.IfsException: IFS-30002: Unable to create new LibraryObject
java.sql.SQLException: ORA-01400: impossible d'insirer NULL dans ("IFSSYS"."ODM_ATTRIBUTE"."DATATYPE")
oracle.ifs.server.S_LibraryObjectData oracle.ifs.beans.LibrarySession.DMNewSchemaObject(oracle.ifs.server.S_LibraryObjectDefinition)
oracle.ifs.beans.SchemaObject oracle.ifs.beans.LibrarySession.NewSchemaObject(oracle.ifs.beans.SchemaObjectDefinition)
oracle.ifs.beans.SchemaObject oracle.ifs.beans.LibrarySession.createSchemaObject(oracle.ifs.beans.SchemaObjectDefinition)
void fr.sword.ifs.GestionDocument.IFSDocument.createDocument(java.lang.String)
void fr.sword.ifs.GestionDocument.IFSDocument.main(java.lang.String[])
So, what am i doing wrong ?
More generally, are we restricted in the types of the attributes ? (for example, would it be possible to add an attribute that would be an inputStream ? Or an object that i have already created ?).
Any help would be appreciated. Thanks in advance.
Guillaume
PS : i'm using Oracle iFS 1.1.9 on NT4 SP6 and Oracle 8.1.7
nullHi Guillaume,
you're welcome. Don't know exactly, but assume that ATTRIBUTEDATATYPE_UNKNOWN
is used to check for erronous cases only
and it shouldn't be used otherwise.
Creating your own objects could be simply done via
ClassObject ifsClassObject;
DocumentDefinition ifsDocDef = new DocumentDefinition(ifsSession);
// get class object for my very own document
ifsClassObject = ClassObject.getClassObjectFromLabel(ifsSession, "MYDOCUMENT");
// set the class for the document i'd like to create
ifsDocDef.setClassObject(ifsClassObject);
// set attributes and content for the document...
ifsDocDef.setAttribute("MYFOO_ATTRIBUTE",....);
ifsDocDef.setContent("This is the content of my document");
// create the document...
PublicObject doc = ifsSession.createPublicObject(ifsDocDef);
null -
I cannot read or write I have been using the iPad With the accessibility icon Is there a video to help teach me To learn how to use this accessibility more efficiently
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x? -
How can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?
Hi!
I have a OSB cluster. I need to read a view with the DBAdapter. I use SequencingPollingStrategy to implement the adapter.
Then I import it into OSB and make it work and the service works normally in the single node.
But if I import it into OSB cluster, the service always read the duplication records from the view.(the Distrbute polling is not worked in SequencingPollingStrategy )
So how can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?
Thank you!Nope. Version 5 is a fashion accessory: it looks like software, but it doesn;t actually do anything. Sort of like a sports car with a lawn-mower engine. Looks snzzy. Doesn't really work. (And given how buggy it is, I should further specifiy that the lawn-mower engine comes with a blade: it chews up your old templates, produces files that cannot be sent as email attahcments [yes, really], and—this just in—doesn;t play well with the new SMB facility of Mavericks. In short, as one reviewer put it, "un unmitigated disaster."
-
I bought a used iPhone and found him email iCloud does not affect me so how can I deleted this email in order to use the device freely and privacy
help me pleaseYou can't. Return the phone for a refund, if you can, because without the previous owner's Apple ID/Password, you will not be able to re-activate the phone. It will be useless to you.
Apple can't/won't help you with this. -
How to use the namespace with a parser?
I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>I want to use the namespace in my project. For this reason, I use a sample
from
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/sax/7b_pe.html
http://java.sun.com/xml/jaxp/dist/1.1/docs/tutorial/dom/5_ns.html
to test my understanding.
The slideshow2.dtd refer to the definition in 'xhtml.dtd'. Because in these
two files, they all use the 'title' as the element names. To solve these
conflicts, The namespace is used to qualified the one in slideshow2.dtd.
But the parser still complain that the 'title' in slideshow2.dtd is declared
more than once.
I use apache's Xerces.
I want to know if Xereces realy support namespace spec. now, or how to use
the namespace with a parser. Can anyone kindly tell me where to find some
material that demo the use of namespace in Java program.
Thanks for any help!!!
#############FILE: slideshow2.dtd ###############
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT slideshow (slide+)>
<!ELEMENT slide (title?, item*)>
<!ENTITY % xhtml SYSTEM "xhtml.dtd">
%xhtml;
<!ELEMENT title (#PCDATA)*>
<!ATTLIST title
xmlns CDATA #FIXED "http://www.example.com/slideshow"
>
<!ELEMENT item (#PCDATA)>
##############FILE: xhtml.dtd #########################
<?xml version='1.0' encoding='us-ascii'?>
<!ELEMENT html (head)>
<!ATTLIST html
xmlns CDATA #FIXED "http://www.example.com/xhtml"
>
<!ELEMENT head (title,style*)>
<!ELEMENT title (#PCDATA)>
<!ELEMENT style (#PCDATA)>
#############FILE: slideshow.xml ####################
<?xml version='1.0' encoding='utf-8'?>
<!DOCTYPE slideshow SYSTEM "slideshow2.dtd">
<slideshow>
<slide>
<title xmlns="http://www.example.com/slideshow">Wake up to
products!</title>
</slide>
</slideshow>
Maybe you are looking for
-
How can I see my email attachments on top of the mail rather than bottom of the email
Hi, I always see the attachments in the bottom of my email where it becomes difficult to scroll down to look to the attachment. Sometimes it gets wired if the mail is long. I am also using Android where the attachment is viewed at top and same was th
-
TCP/IP portrange for local Debugging
How can I restrict the TCP/IP ports used to connect from the server to the client when locally debugging with JDeveloper 10g? I'm talking about this command (executed by JDeveloper): call dbms_debug_jdwp.connect_tcp(ip-address, port) Thanks.
-
I have Lightroom 4.4. When I try and select Book Module, I get the follwoing error: (unknown C ++ exception). Only this module creates this message. Does anyone have any ideas how to correct this?
-
I have a photo book that I have created here in Australia, of my cousin's wedding. My uncle in NZ wants to pay for the book with his NZ c/card and have it delivered to him. I can't seem to change the delivery address to another country. What are m
-
[SOLVED] Monitor sponteanously goes into irrecoverable powersave
I've been using Arch Linux on a new computer setup for about 4 days, and twice recently my monitor has gone into powersave, and I can't get out. It won't let me restart X or switch to a terminal. If I unplug and plug in my monitor, it goes right into