How to do reassingment of the task from the workflow.

Hi,
I have two work flow one is approval workflow & another is reassignment workflow in which manager approval is need for reassignment, once manager will approve, task should be reassing to requested user in approval workflow. How can i reassign the task from process 2 to process1. Please suggest.
Thanks
Edited by: 949691 on Sep 27, 2012 6:27 PM

I haven't tried it for this, but try using a correlation.
Create the correlation in the process you want to notify -> add an event subprocess in that process who's start event is an interrupting Message event that takes a string as input that is the user id you want to reassign it to -> add an Update Task in the event in the event subprocess -> change the Update Task's operation to "Reassign" and assign it to the user id that the notifying processes sends in -> have the notifying process send the notification into this process with the user id you want to reassign the instance to.
In his blog post from about a year ago, Arun Pareek did an infinitely better job of explaining correlations than I have - http://beatechnologies.wordpress.com/2011/10/17/working-with-custom-correlation-in-oracle-bpm-suite-11g-ps4-feature-pack/.
Hope this helps,
Dan

Similar Messages

How do I remove an email address from a workflow notification?

Hi, I was wondering if you could help me please. Can you tell me how to remove an old email address from a workflow notification? The person's name and email address have already been removed from the list of Users in the Admin area, but some workflow notifications are still being sent to their email. Any ideas?
Many thanks for your help.

Thanks Liam, I'd previously looked at the also notify field and it didn't show any other email addresses. This time I clicked on the second of my two options in the Workflow Steps field, and then clicked back on the first one again, and hey presto, two email addresses appeared! The offending email address has now been removed.
Thanks again for your help. Cheers!

How do i pass a daqmx task from labview to matlab using the math interface toolkit?

I want to use DAQMX functions from Matlab using the Math Interface Toolkit (MIT). How can I have a labview function output (return) the DAQMX task to matlab via the MIT?
I want to do this so I can start a DAQMX task in Labview from a matlab function and return control to matlab without losing the task.

Hi Mark,
(I already posted this answer in your other thread, but let's keep THIS thread alive - it makes more sense here in the LabVIEW forum than in Instrument Control forum.)
Since the DAQmx Task is not a native data type that can be passed directly to MATLAB from LAbVIEW, try flattening the DAQmx Task to a string before passing to MATLAB. However, I doubt that you can access the task from within MATLAB, but feel free to give it a try.
Good luck!
- Philip Courtois, Thinkbot Solutions

How to change an already saved TASK in a workflow?

Can somebody tell me how to change the TASK of a workflow to "CHANGE" mode, after it's been saved? Here, I find that once I create and save a task, I am unable to edit it.
Thanks,
Max.

Hi Max,
what version are you on, I remember that using SWDD for workflow modeling is not advised for 4.6c or older versions. I even heard of workflows disappearing and other strange stuff. It's advised to use PFTC for it.
Kind regards, Rob Dielemans

How to exclude invoices matched to receipts from approval workflow (APINV)?

I am trying to exclude the approvals for invoices matched to receipts. is this something possible?
Thanks,

I set the value "NO" to exclude PO matched invoices attribute so that the workflow will consider sending approvals to PO matched invoices. But the requirement is, if an invoice is matched to a receipt then I don't want the workflow to be kicked off.

How to find ObjectKey for the workflow, or Task for a ObjectKey

Hi,
I am developing a custom workflow for a customer request,
I need to apply a condition like, If there is a open workflow request for this customer, then it should not start another workflow.
how do I do that ?
I tried to look into SWi6, it gives results till I keep the Object key Blank, if I use this with the object key then it gives no result.
I have also tried function module SAP_WAPI_WORKITEMS_TO_OBJECT, but still no success.
I have developed my own Business object for this with key fields.
thanks
Siddharth

Hi,
You can check in the table SWW_WI2OBJ, whether for the key and business object, there is workflow exist or not.
Get the last workitem based on the timestamp and pass that work item in SWWWIHEAD and get the top work item.
Now check whether the status is COMPLETED or INPROCESS or READY, based on which you can trigger or not.
Regards,
JMB

Forward a task from SharePoint workflow

Hi,
I have a workflow that has a Collect Data from a User action
and generates a task to a particular participant to complete the task. Now, is it possible that this user can forward this email notification to a particular user and that user can complete the task? Assuming he has contribute rights on task list?
Please confirm.

Hi,
The person has contributor right in SharePoint site can change the assignee name make himself as the task Assigned To. So it is possible.
Thanks

How to run GP process from ABAP Workflow

Hi All,
Can anybody tell me in detauls how can I run a GP process from ABAP workflow. What configuration are required for that in J2EE engine side as well as ABAP side.
Thanks
Chandan

Hi Chandan,
see <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/b1/259142d4d4b81ce10000000a1550b0/frameset.htm">here</a>, maybe this help.
Ciao
Luca

How can I move a task from a Summary Task to another Summary Task in the same task list?

Hey, I tried to move tasks through the SP UI from one Summary Task to other in the same task list, but I didn't find possibility for it.
Then I spent time to learn the SP Client Object Model and now I can read tasks form the list. I see every task has a "FileRef" and a "FileDirRef" field. If I think right these fields show the relation between list elements for example between
a Task and a Summary Task elements.
I changed these fields' values and I tried to Update the ListItem but I got this error message: "Invalid data has been used to update the list item. The field you are trying to update may be read only."
I really need to move tasks what were created below a wrong Summary Task so please explain a method or pattern how I can do this. (I can create a new Task below to any Summary Task and I can set field values but I hope there is a way to really move tasks (I
mean I should change the right field values somehow.).
I can reach the Task List both on the server and client side so I'm very interested in every solution. PowerShell solution is also good for me.
I'm using SharePoint 2010 SP2.
Thank you for your answer and your time. :)
Csaba Marosi

Hi,
According to your post, my understanding is that you want to move a task from one summary task to another in the same task list.
We can do it like this:
We can create a Gantt View for this task list, then copy your tasks inside a summary task, then navigate back to the other summary and paste, then go back to original and delete.
Here is another way for your reference:
SharePoint vs Powershell – Moving List Items between folders
http://sharepointstruggle.blogspot.in/2010/07/sharepoint-vs-powershell-moving-list.html
Best Regards
Dennis Guo
TechNet Community Support

How do you copy/move the ASU Toolbox task list from one system to another

We are upgrading from 3.5 to 7.01 and have maintained the the task list in /n/asu/upgrade in our sandbox. I would like to be able to move the task list to our other systems so I don't have to reenter the tasks again. I know the base tasks are in an xml file but I don't know which one.
Does anyone know how to move/copy the tasks from one system to another?

I agree with Antonio, but since we don't know if the Mail app on the Mini is the same version as the one on your new iMac, I'd err on the side of caution and allow Mail on the new iMac to set up; additionally, I'd prefer to start with a new preference file. In order to make it easier, you could take screenshots of all the account windows on the Mini. You can then use those to enter the info when setting up Mail on the new iMac.
After Mail is set up, quit Mail. Go to the location outlined by Antonio (Users-Library-Mail) and compare the folders with the folders from the old Mail app; i.e. the new Inbox folder should be empty -> remove that (drag to trash) and replace it with your old Inbox folder (same with Sent, etc). If you have old folders not found in the new location, add them.
When done, open Mail and your folders and emails should all be there.

How to disable an out of the box disable User process task from resource?

How should I disable the out of the box disable User process task that is assigned to a particular resource? If I disable this disable User process task, when the user is provisioned to the same resource will I be able to stop this disable User process from running?
My requirement: I need to disable the disable user process task from three resources x, y and z. Whenever a user is provisioned to one of these resources I should stop this disable user process task an out of the box process task from running. How can this be accomplished?? Please help me out on how to configureto remove the process task in the OIM Admin console to stop the process task.

You can avoid the disable task from triggering by removing the Disable Process Or Access to Application from the task effect drop down in the process task. But this task is triggered once the user is disabled. But still I didn't understand the exact scenario.
By the way the disable task is triggered when the user gets disabled and not when the user is provisioned.
Edited by: vindla on Aug 1, 2011 10:26 PM

How do I move all my files from one User Profile (account) into another? I needed to create a new account and want all of my files accessible in the new one.

How do I move all my files from one User Profile (account) into another?
I needed to create a new account and want all of my files accessible in the new one.

ok, what you're learning right now is 101 unix, which is good. Unix is a good thing
now: the way unix works, and macos (which uses unix underneath) the files and folders work like a hierarchy.
the start of that tree is /
so, if you were to do:
cd /
(cd means change directory)
it will bring you at the highest branch of the file system.
cd /Users
will bring you to where all the users are.
to see whats in /Users you can use your friend ls command
ls means list files/directories
so:
cd /Users
ls -la
(the -la here means show all (even hidden) and long format (very verbose)) this flag is very optional.
you will see
fred
user2
for example.
if you want to see the desktop of user2 you would change directory to it then list the files.
for example:
cd /Users/user2/Desktop
Note that the files and directory are case sensitive, so, desktop is NOT the same as Desktop, or DESKTOP
ls -la
you should then be able to see everything in users2 desktop
you could have done as well the same thing in smaller steps, for example:
cd /
cd Users
cd user2
cd Desktop
this is the equivalent of cd /Users/user2/Desktop
So, for your file, i don't know where it was, but know that if you log in as user2, it will directly put you in
/Users/user2
which most likely the file you had created from the other user was in /Users/user1
if you copied all the files from /Users/original_user to /Users/secondUser
most likely yes, all your mail, bookmarks etc would be copied over.
so in your case.
sudo chown -R seconduser:staff /Users/secondUser
should work
Remember that if you start a path with the character / it means start from the root of the file system, at the highest top you can ever get.
so
cd /Users/fred
is not the same as
cd Users/fred
unless you were in / already
i know it may be confusing at first but it's actually very logical if you play with it.
to simplify, think of it that / means C:\ on windows
you can't go any higher than C:\ (in a way)
if you're unsure which directory you're currently in, you can always type:
pwd
it will tell you where you are.
for example:
cd /
pwd
this shows /
cd Users
pwd
this now shows /Users
cd /System/Library
pwd will show /System/Library
cd /
cd /Users
cd fred
cd Library
pwd will show /Users/fred/Library
unix can look very scary but it's actually vital and very necessary to do tasks sometimes that would take for ever to do via the windows. This is good learning.
so for the myfile you had created, i can't tell you where it is, at the time you created, if you can do a pwd command you'll know the path,
ls -la (this shows all the files where you are)
if you see myfile in the list
do a pwd
whatever is return, the real location of the file would be:
whatever pwd returned / myfile
I hope that makes sense.

How can I use a Lookup task to lookup from my SQL Result set and have a join

So in my Control Flow, I have an Execute SQL Task which gets my Table result set. I then have a Foreach Loop Container that iterates through the result set and a Data Flow. The first task in the Data Flow is an OLE DB Source SQL Command that retrieves data
columns associated with my result set. I then do a Derived Column so I can SUBSTRING from one of my data columns and now I want to perform a Lookup to my Application Database.
How do I code my Lookup task to utilize my SQL Result set variable and match on it? I cannot use the GUI for the Lookup task as my Lookup has to have some JOINS in it.
Thanks for your review and am hopeful for a reply.

Can you expand on that? I'm sorry but I am new and a novice to the SSIS world and I want to do this as best I can and as efficiently as I can. Are you saying that Rajen's way suggested above is the way to go?
A little background....external data from a 3rd party client. I'v staged that external data to a SQL Server staging table. I have to try and match that data up to our database using SSN, DOB, and Gender...and if I can't match that way then I have to try
and match by Name. I need to make sure that there is only one and only one account for that match. If I cannot match and match one and only one, then I'll create rows on a DataAnomaly Table. If I do match, then I have to check and make sure that there is only
one and only one Member span for that match. Similarly handle the data anomaly and then check and make sure there is a "Diabetes" claim and similarly handle the DataAnomaly accordingly.
That's where I'm at. Sooooo are you saying to use Rajen's suggestion? I don't think I can do that because I need multiple SQL tasks and I cannot connect multiple OLE DB Source tasks.
Any help and suggestions are greatly appreciated.
Thanks.

How to set password in the form, request is coming from SPML with no pwd

Hi ,
Im using SPML request to create and modify users? I have 2 problems
1) Does anyone know, how to customize the form to call 2 different workflow depending on the request meaning, if SPML request is ADD, then it should call Create User workflow, and SPML request is MOD then it should call Update User workflow.
Right now, i don't know who to do it and currently it is working for create users only.
2) Im not getting password field from SPML request, so i have to set password with value 'password' in the form. Can i do that and How?
Appriciate any response

Hi,
According to your post, I know you want to add a custom field to Task form. When vale is Yes, send the email to the assigned person. When the value is No, item update and user can approve the task without the email sending out.
Doubt you have already create an approval workflow which associated with Task list in SharePoint Designer.
1. To add new fields to Task Form, click New button in Task Form Fields section. Name the “Send the email or not” of choose type. See the below image:
Then, save and publish the workflow to make it effect. You can visit the following article for details:
Updating List Item with Task Form Custom Field in SharePoint Approval 2010 Workflow
http://blogs.msdn.com/b/kishore/archive/2012/01/15/updating-list-item-with-task-form-custom-field-in-sharepoint-approval-2010-workflow.aspx
2. In SharePoint Designer, create another workflow which associated with Task list.
a. Click workflows > List Workflow and choose Task list.
b. Add the condition, if the current item: “Send the email or not” is equals to yes. Then, add the action “Send an email”.
c. Publish the workflow.
Thanks.
Tracy Cai
TechNet Community Support

How can I add a direct refrence to a task from an email

Hi, I use a work flow to notify a user when a task is opened, how can I send with this task email notification a direct link to task itself? (same goes with opp/SR)
Thanks, David

This is a link to an Opty record on the DSA pod:
https://secure-ausomxdsa.crmondemand.com/OnDemand/user/OpportunityDetail?OpptyDetailForm.Id=ABJA-XXXXXX
To reuse this for any other record type or another system do the following:
Open a record that you want to link to i.e. SR for DSA Demo and you get this URL at the top
https://secure-ausomxdsa.crmondemand.com/OnDemand/user/ServiceRequestDetail?ServiceRequestDetailForm.Id=HU15-XXXXX&OMTGT=ServiceRequestDetailForm&OMTHD=ServiceRequestDetailNav&OMRET0=ServiceRequestHomepage&OCTYPE=Other&ocTitleField=Abstract&ocTitle=Send+copy+of+Annual+Report&ocEdit=Y
As you can see the URL starts the same except it references ServiceRequestDetail instead of Opty detail.
From the OnDemand screen copy everything from http:// to ServiceRequestDetail? ServiceRequestDetailFormID= and paste it into your workflow email.
Click the Fx button and add the Row ID.
Voila you now have a link in an email that will open the record that triggered the workflow.

How to do reassingment of the task from the workflow.

Similar Messages

Maybe you are looking for