How to draw an array of imageIcons in java

Hi,
I am working on a UI in which i need images taken from a local path to be listed out in the panels .
I have two panels one left and one right .
half set of images shuld get listed in left panel and the other half shuld get listed in the right panel.
Right now i am using to functions called List and List1 and adding List to left panel and List1 to the Right panel both the functions are in one class called DrawClass.
My problem is how can i write this as a single funtion to reduce my lines of code.
thanks
swathi.

it was help ful but have still some doubt...
This is my piece of code where i am getting some images, creating image icons for them , adding these to a jlist and then to a scroll pane.
void DrawListOfImages()
           filepath=new ListClass();
           imagefiles = new ImageIcon[filepath.filename.length];
           images = new Image[filepath.filename.length];
           Integer[] intArray = new Integer[filepath.filename.length];
           for(int i=0;i<filepath.filename.length;i++)
                intArray[i] = new Integer(i);
                imagefiles[i] = new ImageIcon( filepath.filename[i] );
                images[i] = imagefiles.getImage();
               images[i] = images[i].getScaledInstance(100, 100, Image.SCALE_SMOOTH);
               imagefiles[i].setImage(images[i]);
          imagefilesList = new JList(imagefiles);     //first list
          imagefilesList1=new JList(imagefiles);          //second list
          rightpane = new JScrollPane(imagefilesList);     for now i am adding same files on both sides
          leftpane=new JScrollPane(imagefilesList1);
          rpane.setSize(100, 100);
     }i want to sort out these files with there extension for example " .amr " files on left pane " .jpg " files on right pane
how can i do that .....?????????????????
thanks
swathi

Similar Messages

How to draw a directed 2D graph in java

how to draw a directed 2D graph in java?-if anybody can suggest some tutorials about this topic or can suggest the way to draw the graph.......how can i do that.......if the nodes of the graph has X and Y co-ordinate.........and the neighbours of each node are known.......suppose
node1 has neighboures node2,node3 and node4.....node2 has node5 and node3 as neighbours.....in this way....so directed edge from node1 to node2,node3,and node4......
or if u can suggest other way out......plz reply....

prometheuzz wrote:
JosAH wrote:
If you can draw a line between two points (x,y) and (x',y') you can draw an edge.
If you can draw one edge you can draw all edges of a graph.Proof by induction!
; )Yep, I copied/pasted exactly the same answer I gave this poster in another forum; I recognized him by his 'plz'-es and the abundance of punctuation ;-)
kind regards,
Jos

How to draw symbol for avalanche diode in multisim ?

Hello all,
I have to include a symbol for diode array in multisim... SP0503BAHT, can anyone please suggest how to draw it? I am very new to multisim...
thanks,
Now on LabVIEW 10.0 on Win7
Solved!
Go to Solution.

Hi,
The easiest approach to do this is to copy the symbol of a diode from the Master Database and then edit the symbol to fulfill your needs.
In the Component Wizard, when you are prompted to Enter symbol information, click on Copy from DB and choose a diode symbol that you like. Click on Edit and then you can edit the symbol.
Hope this helps.
Regards,
Tayyab R,
National Instruments.

How to draw a simple little line.

I have a JApplet that loads images from a jar file. This applet can scale the images, and move them left right, up and down.
I just want to be able to draw a line on top of the images and then erase it if needed. How do I do this?
Currently, I have a the jpg images loaded into an Image, which is then converted to an ImageIcon, which is then used to create a JLabel, which is used to create a JScrollPane which finally gets added as a tab on a JTabbedPane.
I was told to use BufferedImage but that didn't help me. Here is what I have currently:
private void draw()
//Get the current image to draw on
JScrollPane jsp = (JScrollPane)m_tabbedPane.getSelectedComponent();
JViewport port = jsp.getViewport();
GrabAndScrollLabel gnsLabel = (GrabAndScrollLabel) port.getView();
ImageIcon ii = (ImageIcon) gnsLabel.getIcon();
BufferedImage bi = new BufferedImage (ii.getIconWidth(),
ii.getIconHeight(),
BufferedImage.TYPE_INT_RGB);
Graphics2D g2 = bi.createGraphics();
g2.setPaint(Color.blue);
g2.drawLineRect(100, 200, 300, 500);
g2.drawImage(ii.getImage(),null,null);
ImageIcon newIcon = new ImageIcon(ii.getImage());
gnsLabel.setIcon(newIcon);
port.setView(gnsLabel);
jsp.setViewport(port);
getRootPane().revalidate();
getRootPane().repaint();
Please help. I can't believe it has to be this difficult to draw a little line.
Thanks.

I have a little more insight into my problem.
I built a sample form Sun (the Map_Line sample). It looks like this:
public class Map_Line extends Applet
private BufferedImage bi;
public Map_Line()
setBackground(Color.white);
Image img = getToolkit().getImage("bld.jpg");
try
MediaTracker tracker = new MediaTracker(this);
tracker.addImage(img, 0);
tracker.waitForID(0);
catch (Exception e)
int iw = img.getWidth(this);
int ih = img.getHeight(this);
bi = new BufferedImage(iw, ih, BufferedImage.TYPE_INT_RGB);
Graphics2D big = bi.createGraphics();
big.drawImage(img, 0, 0, this);
public void paint(Graphics g)
Graphics2D g2 = (Graphics2D) g;
int w = getSize().width;
int h = getSize().height;
int bw = bi.getWidth(this);
int bh = bi.getHeight(this);
g2.drawImage(bi, null, 0, 0);
g2.setColor(Color.white);
g2.setStroke(new BasicStroke(5.0f));
g2.drawLine(10, 10, bw - 10, bh - 10);
public static void main(String[] s)
WindowListener l = new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
Frame f = new Frame("Map_Line");
f.addWindowListener(l);
f.add("Center", new Map_Line());
f.pack();
f.setSize(new Dimension(350, 250));
f.show();
Note how the drawing is done in paint. This applet works just fine for me.
The difference is that I'm trying to use the BufferedImage to get my Graphics2D object where as this one gets it from paint (casts Graphics to Graphics2D).
This applet works just fine, but if you try to use the Graphics2D that comes back from the BufferedImage, it doesn't work!.
For example, if I create a member variable:
Graphics2D big;
And then in paint do this:
//Graphics2D g2 = (Graphics2D) g;
Grahics2D g2 = big;
It no longer works!
So, it looks like I need to use something other than the
BufferedImage.createGraphics() to get the Graphics2D object I need.
Does this seem right?
Thanks!

How to draw horizontal line in smartform after end of the all line items

Hi Friends,
I am working on the smartform. I have created TABLE node in Main window.
i want to draw a horizontal line after end of the main window table node. i mean after printing all the line items of the table, I need to print one horizontal line.
Could you please help me how to resolve this issue.
FYI: I tried with the below two options. But no use.
1. desinged footer area in the table node of the main window.
2. tried with uline and system symbols.
please correct me if i am wrong. please explain in detail how to draw horizontal line after end of the main window table.
this is very urgent.
Thanks in advance
Regards
Raghu

Hello Valter Oliveira,
Thanks for your answer. But I need some more detail about blank line text. i.e thrid point.
Could you please tell me how to insert blank line text.
1 - in your table, create a line type with only one column, with the same width of the table
2 - in table painter, create a line under the line type
3 - insert a blank line text in the footer section with the line type you have created.

How to draw text vertically, or in an angle

please help me how to draw text vertically, or in an angle

I robbed the framework from Dr Las or 74phillip (don't remember which) ...
import java.awt.*;
import java.awt.geom.*;
import javax.swing.*;
import javax.swing.event.*;
public class AngleText extends JPanel {
private int      degrees = 16;
private JSpinner degreesSpinner;
public AngleText () {
    setBackground ( Color.WHITE );
} // AngleText constructor
protected void paintComponent ( Graphics _g ) {
    super.paintComponent ( _g );
    Graphics2D g = (Graphics2D)_g;
    g.setRenderingHint ( RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON );
    AffineTransform at = AffineTransform.getRotateInstance ( Math.toRadians ( degrees ) );
    Font f = g.getFont();
    g.setFont ( f.deriveFont ( at ) );
    g.drawString ( "Rotating Text!", getWidth()/2, getHeight()/2 );
    g.setRenderingHint ( RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_OFF );
} // paintComponent
public JPanel getUIPanel () {
    SpinnerModel degreesModel = new SpinnerNumberModel (
                                  degrees // initial
                                 ,0        // min
                                 ,360      // max
                                 ,2        // step
    degreesSpinner = new JSpinner ( degreesModel );
    degreesSpinner.addChangeListener ( new DegreesTracker() );
    JPanel panel = new JPanel();
    panel.add ( degreesSpinner );
    return panel;
} // getUIPanel
// DegreesTracker
private class DegreesTracker implements ChangeListener {
    public void stateChanged ( ChangeEvent e ) {
      Integer i = (Integer)((JSpinner)e.getSource()).getValue();
      degrees   = i.intValue ();
      repaint();
} // DegreesTracker
// main
public static void main ( String[] args ) {
    JFrame f = new JFrame ( "AngleText" );
    f.setDefaultCloseOperation ( JFrame.EXIT_ON_CLOSE );
    AngleText app = new AngleText();
    f.getContentPane().add ( app );
    f.getContentPane().add ( app.getUIPanel(), BorderLayout.SOUTH );
    f.setSize ( 200, 200 );
    f.setVisible ( true );
} // main
} // AngleText

How to draw vertical lines in SMART FORMS

Hi Guys,
Can anyone please let me know how to draw vertical and horizontal lines in smart forms, i have to do this in the secondary window.
thanks,
Ramesh

Hi Ramesh,
In the window output options you have option of check box to get lines.
Then you need to give the spacing for vertical and horizontal.
Another option is putting a template on window and getting the boxes, but it is quite little bit complex.
Put the cursor on the WINDOW in which the lines you want.
Right click on it>create>complex section.
In that select the TEMPLATE radio button.
Goto TAB TEMPLATE.
Name: give some name of line.
From: From coloumn.
To: To coloumn
Height: specify the height of the line.
Next give the coloumn widths.
Like this you can draw the vertical and horzontal lines.
If the above option doesnot workout then u can try the below option also
any how you can draw vertical and horizontal lines using Template and Table.
for Template First define the Line and divide that into coloumns and goto select patterns and select the required pattern to get the vertical and horizontal lines.
For table, you have to divide the total width of the table into required no.of columns and assign the select pattern to get the vertical and horizontal lines.
if this helps, reward with points.
Regards,
Naveen

I would like to know how to draw up a list in a cell (like a pull-down menu) to ease data capture, but I don't know how to do that ! Do you get the idea ? Thanks !

I would like to know how to draw up a list in a cell (like a pull-down menu) to ease data capture, but I don't know how to do that !
Do you get the idea ?
Thanks ever so much !

the numbers manual can be downlaoded from this website under the Apple support area...
http://support.apple.com/manuals/#numbers
What your looking for is written out step by step for drop downs and all other special types of user input starting around page 96 in the '09 manual.
Jason

How to draw horizontal line at the end of table for multiple line items

Dear Experts,
                   Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
Thanks
Ramesh Manoharan

Hi
   I tried as per your logic but it is not solving my problem . when i am gone to table painter it is showing line type 1 and line type 2
is below format.. if u see here line type 1 bottom line and line type 2 top line both are same.. so how to avoid this ?
                          line type 1
                         line type 2

How to draw table in layout in module pool

how to draw table in layout in module pool with wizard or table control

Hi
Goto Screen Painter .
here we can create table in 2 ways,
with wizard and without wizard.
with wizard it will step by step...
for without wizard (its quite easy)
Click Table control and Drag into ur screen.
then --> click input box and place into to that table control
for two column do this two times.
then for header click the text icon in left side and drag into
correspoding places .. then ur table is ready..
then give names using double clicking the elements
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
Reward if useful.

How to map an array to fixed fields using Biztalk mapper

I need to remap an array of objects like this:
<Root>
<ListOfObjs>
<Obj>
<Attr1>0000</Attr1>
<Attr2>Hello!</Attr2>
</Obj>
<Obj>
<Attr1>1111</Attr1>
<Attr2>Hello1!</Attr2>
</Obj>
</ListOfObjs>
</Root>
in an output like this:
<Root>
<Obj1_Attr1>0000</Obj1_Attr1>
<Obj1_Attr2>Hello!</Obj1_Attr2>
<Obj2_Attr1>1111</Obj2_Attr1>
<Obj2_Attr2>Hello1!</Obj2_Attr2>
</Root>
So in my XSD schema I have something like this:
Schema Input
<xs:element name="Root">
<xs:complexType>
<xs:sequence>
<xs:element name="ListOfObjs">
<xs:complexType>
<xs:sequence>
<xs:element name="Obj">
<xs:complexType>
<xs:sequence>
<xs:element name="Attr1">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Attr2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
Schema output
<xs:element name="Root">
<xs:complexType>
<xs:sequence>
<xs:element name="Obj1_Attr1">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Obj1_Attr2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Obj2_Attr1">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Obj2_Attr2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
In addiction I have to evaluate every single value because when I found some conditions (like if value=0000 output should be NULL).
What would be the best way to do it? I'm thinking to develop a custom functoid but I'm not sure it would be the best way, probably it could be done even using XSLT inline transforms, can you point me in the best direction?
Thank you

Hi,
You cannot directly map an array output to any single field in BizTalk mapper.
Couple of options :
1) create
the Xslt or inline C# code
Refer:
http://seroter.wordpress.com/2008/10/07/splitting-delimited-values-in-biztalk-maps/
2) Shankycheil has
provided a solution to similar requirement in the below link, u can also refer that.
https://social.msdn.microsoft.com/Forums/en-US/55ec472d-4f34-4057-b1c6-0e50740f0f6e/how-to-itterate-string-array-values-in-biztalk-mapper?forum=biztalkgeneral
Rachit
Thank you, I already seen both posts, but I'm not sure they are what I need or I can't understand well how to use them.
Speaking about the first solution, as I told before, in the example I should have an array already formed and delimited by a char (something like "obj1attr1-obj1attr2-ob2attr1-obj2attr2". In this situation probably this example could be a good
point to start from, but how to transform my complex input object in a similar formatted string?
About the second I don't understand well what is the working solution that they have adopted. Is the 4 steps solution suggested by Shankycheil? If yes, how can I loop between all array elements and extract all their values?

How to Draw 3-D scatter plot in J2ME?

HI all
I am new in J2ME And I need to draw a three dimensional scatter plot in J2ME application. Can any body help me how to do so? It's urgent and I am eagerly waiting for your response. Even if you can tell me how to draw a 3-D point like (x,y,z)=(3,5,8) in J2ME?

I've removed the thread you started in the Java3D forum.
db

How to build a array with high sampling rates 1K

Hi All:
Now I am trying to develop a project with CRio.
But I am not sure how to build a array with high sampling rates signal, like >1K. (Sigle-point data)
Before, I would like to use "Build Arrary" and "Shift Register" to build a arrary, but I found it is not working for high sampling rates.
Is there anyother good way to build a data arrary for high sampling rates??
Thanks
Attachments:
Building_Array_high_rates.JPG ‏120 KB

Can't give a sample of the FPGA right now but here is a sample bit of RT code I recently used. I am acquiring data at 51,200 samples every second. I put the data in a FIFO on the FPGA side, then I read from that FIFO on the RT side and insert the data into a pre-initialized array using "Replace Array subset" NOT "Insert into array". I keep a count of the data I have read/inserted, and once I am at 51,200 samples, I know I have 1 full second of data. At this point, I add it to a queue which sends it to another loop to be processed. Also, I don't use the new index terminal in my subVI because I know I am always adding 6400 elements so I can just multiply my counter by 6400, but if you use the method described further down below , you will want to use the "new index" to return a value because you may not always read the same number of elements using that method.
The reason I use a timeout of 0 and a wait until next ms multiple is because if you use a timeout wired to the FIFO read node, it spins a loop in the background that polls for data, which rails your processor. Depending on what type of acquisition you are doing, you can also use the method of reading 0 elements, then using the "elements remaining" variable, to wire up another node as is shown below. This was not an option for me because of my programs architecture and needing chunks of 1 second data. Had I used this method it would have overcomplicated things if I read more elements then I had available in my 51,200 buffer.
Let me knwo if you have more qeustions
CLA, LabVIEW Versions 2010-2013
Attachments:
RT.PNG ‏36 KB
FIFO read.PNG ‏4 KB

How to draw 2D shapes on the image generated by JMF MediaPlayer?

Hello all:
IS there any way that we can draw 2D shapes on the image generated by JMF
MediaPlayer?
I am currently working on a project which should draw 2D shapes(rectangle, circle etc) to
mark the interesting part of image generated by JMF MediaPlayer.
The software is supposed to work as follows:
1> first use will open a mpg file and use JMF MediaPlayer to play this video
2> if the user finds some interesting image on the video, he will pause the video
and draw a circle to mark the interesting part on that image.
I know how to draw a 2D shapes on JPanel, however, I have no idea how I can
draw them on the Mediaplayer Screen.
What technique I should learn to implement this software?
any comments are welcome.
thank you
-Daniel

If anyone can help?!
thank you
-Daniel

How to set an array element in an object type of array??

Hi,
I have set attribute as follow:
Color[] colors;
Color[] colors = new Color[20];
colors[0] = "Red";
colors[1] = "blue";I can't compile this code. It said:
"Incompatible type -found java.lang.String but expected Colors
Could you tell me how to set an array elements when the array type is an object?

in your case, the array shouldn't be Color[] but String[] since you re intending to put strings into it
by the way, you could also use a hashmap to map a string to a color:
HashMap<String, Color> hm = new HashMap<String, Color>();
hm.put("Red", Color.RED);
hm.put("Blue", Color.BLUE);
etc.

How to draw an array of imageIcons in java

Similar Messages

Maybe you are looking for