How to draw filled polygons ?

Hi guys,
I would like to know how to draw filled polygons using CoreGraphics framework.
Here is example I am trying to draw:
I have A,B,C,D,E,F and G.
Can you suggest me ?
Thank in advance.

From CGContextDrawPath:
"Draws the current path using the provided drawing mode. [..] mode: A path drawing mode constant—kCGPathFill [etc.]"
Apparently, the accompanying QuartzDemo shows how to use it in practice.

Similar Messages

How to draw filled shapes quickly (especially from multiple strokes)?

Greetings. I'm making a comic for the 1st time and am using Inkscape. My problem is, on paper I'm way, way faster than with a vector drawing program (even when using a Wacom tablet) mainly because I find it difficult to draw shapes with 1 stroke and instead have to spend a lot of time joining multiple strokes into solid shapes.
Is there some features or plugins in Adobe Illustrator that can make this much faster? Or are there other drawing methods that would be much faster ?
I've attached examples of what I want to be done automatically.
The 1st case shouldn't be hard. The 2nd case of dealing with emergent shapes seems to be very difficult for a computer. I also have plenty of programming knowlege, so I would be glad to make a plugin to do this if someone can point me to the right idea.

Which version of Illustrator are you using?
In current versions there is Live Paint and the Shape Builder tool.

How to draw Overlapping transparent Polygons with different shades of color

I had been working with the Graphics package for some time now. I want to now draw multiple polygons without using the fill method i.e by shading a transparent color. The overlapping regions should have a thicker density of the colors. I am currently trying out by creating a Buffered image of the polygons. Let me know if there is any other easy approach..................

This may be a dumb quesiton and if so, I'm sorry, but why doesn't fill work for you?
I think that you may do well to create and post the smallest program possible that is compilable, runnable, demonstrates your problem, and has no extraneous code not related to the problem, an [SSCCE.|http://sscce.org] Please see the link for details on how to create one of these because trust me, if your SSCCE is compliant with the specs, you'll likely get a very helpful answer from someone here quickly.

Drawing a polygon on several maps

Hello,
I'm drawing a polygon on my map, in WPF. Everything's fine, but the problem is when i zoom out, i can see other maps, like if they're added after the principal and the polygon isn't drawn on those.
My questions are : Is it possible to draw on several maps at the same time? And how to do it?
Thanks
Max

I guess the second option is the one that i need, but it doesn't work for me. I took the exemple in the msdn page of "Adding shapes to the map". I modified it so it can do what i want, but it tells me that he can't load "Microsoft.Maps.MapControl.WPF.pdb".
I've searched everywhere but can't find any references to this error.
Here's the code:
MapTileLayer layer = new MapTileLayer();MapPolygon polygon = new MapPolygon();
polygon.Fill = new System.Windows.Media.SolidColorBrush(System.Windows.Media.Colors.Blue);
polygon.Stroke = new System.Windows.Media.SolidColorBrush(System.Windows.Media.Colors.Green);
polygon.StrokeThickness = 5;
polygon.Opacity = 0.7;
polygon.Locations = new LocationCollection() { new Location(47.6424,-122.3219),
new Location(47.8424,-122.1747),
new Location(47.5814,-122.1747)};
layer.Children.Add(polygon);
myMap.Children.Add(layer);

How to Draw table in SAPscript ???

Hi all Guru of SAPScript!
I want to draw a table with column and row in SAPscript. Who can help me step by step?
Thanks!
Edited by: kathy a on May 6, 2008 11:53 AM

Hi,
Use BOx Syantax How to Draw table in SAPscript ??? Pls Read the description
Syntax:
1. /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
2. /: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
3. /: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each parameter (XPOS, YPOS, WIDTH, HEIGHT and FRAME), both a measurement and a unit of measure must be specified. The INTENSITY parameter should be entered as a percentage between 0 and 100.
XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH: Width of the box.
Default: WIDTH value of the SIZE command.
HEIGHT: Height of the box.
Default: HEIGHT value of the SIZE command.
FRAME: Thickness of frame.
Default: 0 (no frame).
INTENSITY: Grayscale of box contents as %.
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP/4 numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measure: The following units of measure may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
Examples:
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION
Syntax:
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words as a value which specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN: Origin of the coordinate system.
WINDOW: Sets the values for the left and upper edges to be the same of those of the current window (default setting).
PAGE: Sets the values for the left and upper edges to be the same as those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
Examples:
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE
Syntax:
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT: Dimensions of the rectangle or line.
WINDOW: Sets the values for the width and height to the values of the current window (default setting).
PAGE: Sets the values for the width and height to the values of the current output page.
Examples:
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
Reward Helpfull Answers
Regards
Fareedas

Can anyone teach me how to draw this photorealistic picture?

Dear all,
Is there anyone that could teach me how to draw the "photorealistic" detail in the picture attached?
Monetary compensation is available.
Thank you very much
David

It is essentially simply paths created with the Pen tool. Then filled with colos and/or gradients. There's nothing special about it.

How to draw and modify double lines with Adobe Illustrator?

I need tot draw roadmaps. This should be easy using the pen tool, but my problem is that I cannot find a way to draw double lines with this tool. I have seen many fancy border styles and patterns. Some do have double or even quadruple lines, but the problem is than that they have an offset from the vector line and the space in between the two lines (the edges of the road) cannot be filled. Somewere I also found some pens called 'Double line 1.1' to 'Double line 1.6' but they also had an offset from the vector and I could not chance the size of the lines and the interval in between them independently.
What I am looking for is a way to draw two lines in parallel and have the option tot fill the space in between with a color or even a pattern.
The color and size of the lines should be changeable to make a distinction between several types of road.
Is there an existing set of pencils for this purpose? It would be nice to be able to draw not only roads, but also railways and rivers!
I am surely not the first person who needs to do this?
I use AI version 6

Jacob,
Thanks for the answer. I have been searching for a solutions for a long
time, but today I found the solution on a forum (not on this one). That
solution is exactly as you described below, i.e. using a coloured line and a
narrower white line on top of the first one. My problem was that I did not
know how to create a custom brush based on the two lines. Now I know how to
do that. However, I still have the problem. I can now draw double lines and
I can change the color of the background line (the coloured one) but I
cannot change the white colour of the narrower line. I assume that I have to
completely redefine a new brush when I need to change that colour too.
Regards,
Rob Kole
Van: Jacob Bugge [email protected]
Verzonden: donderdag 28 maart 2013 17:04
Aan: RKOLE
Onderwerp: How to draw and modify double lines with Adobe
Illustrator?
Re: How to draw and modify double lines with Adobe Illustrator?
created by Jacob Bugge <http://forums.adobe.com/people/Jacob+Bugge> in
Illustrator - View the full discussion
<http://forums.adobe.com/message/5186535#5186535

How to draw a globe with lines of lattitude and longitude?

I'm using CS4 on a Mac.
Can anyone tell me how to draw a globe with a grid? I need 7 lines of latitude and 40 lines of longitude (i.e. separated by 9 degrees). I would like to have each segment of the grid defined as shape so I can fill each one with a different color.

Maybe this way can help.....

HT1438 dont i have to submit a slip before giving back in my ipod for fixing? what do i do? how do i fill in the form?

how do i fill in the form to give back my ipod and get a new one? whats the website i go to and what do i type in? can i change the color of my ipod from black to white?

Follow the instructions here:
Apple - Support - iPod - Service FAQ
I do not think you can change the color but you can ask.

How do I fill an Excel spreadsheet with the contents of a DataTable? (C#, OleDb)

The following fills a DataTable with the contents of an Excel spreadsheet.
    oledbCmd.CommandText = "SELECT * FROM [" + stSheetName + "$]";
    DataTable dtDataTable = new DataTable();
    using (OleDbDataAdapter oledbAdapter = new OleDbDataAdapter(oledbCmd))
    oledbAdapter.Fill(dtDataTable);
How do I fill an Excel spreadsheet with the contents of a DataTable?
bhs67

You can try this Excel library, it can help u to
export datatable to excel to Database.
After add the reference to your project ,add the following code:
private void button1_Click(object sender, EventArgs e)
//connect database
OleDbConnection connection = new OleDbConnection();
connection.ConnectionString @"Provider=""Microsoft.Jet.OLEDB.4.0"";Data Source=""demo.mdb"";User Id=;Password="
OleDbCommand command = new OleDbCommand();
command.CommandText = "select * from parts";
DataSet dataSet = new System.Data.DataSet();
OleDbDataAdapter dataAdapter = new OleDbDataAdapter(command.CommandText,connection);
dataAdapter.Fill(dataSet);
DataTable t = dataSet.Tables[0];
//export datatable to excel
Workbook book = new Workbook();
Worksheet sheet = book.Worksheets[0];
sheet.InsertDataTable(t, true, 1, 1);
book.SaveToFile("insertTableToExcel.xls");
System.Diagnostics.Process.Start("insertTableToExcel.xls");
http://www.e-iceblue.com/Tutorials/Spire.XLS/Spire.XLS-Program-Guide/Data-Export-/Import-Export-Datatable-to-Excel-from-Database.html

How to draw horizontal line in smartform after end of the all line items

Hi Friends,
I am working on the smartform. I have created TABLE node in Main window.
i want to draw a horizontal line after end of the main window table node. i mean after printing all the line items of the table, I need to print one horizontal line.
Could you please help me how to resolve this issue.
FYI: I tried with the below two options. But no use.
1. desinged footer area in the table node of the main window.
2. tried with uline and system symbols.
please correct me if i am wrong. please explain in detail how to draw horizontal line after end of the main window table.
this is very urgent.
Thanks in advance
Regards
Raghu

Hello Valter Oliveira,
Thanks for your answer. But I need some more detail about blank line text. i.e thrid point.
Could you please tell me how to insert blank line text.
1 - in your table, create a line type with only one column, with the same width of the table
2 - in table painter, create a line under the line type
3 - insert a blank line text in the footer section with the line type you have created.

How to draw text vertically, or in an angle

please help me how to draw text vertically, or in an angle

I robbed the framework from Dr Las or 74phillip (don't remember which) ...
import java.awt.*;
import java.awt.geom.*;
import javax.swing.*;
import javax.swing.event.*;
public class AngleText extends JPanel {
private int      degrees = 16;
private JSpinner degreesSpinner;
public AngleText () {
    setBackground ( Color.WHITE );
} // AngleText constructor
protected void paintComponent ( Graphics _g ) {
    super.paintComponent ( _g );
    Graphics2D g = (Graphics2D)_g;
    g.setRenderingHint ( RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON );
    AffineTransform at = AffineTransform.getRotateInstance ( Math.toRadians ( degrees ) );
    Font f = g.getFont();
    g.setFont ( f.deriveFont ( at ) );
    g.drawString ( "Rotating Text!", getWidth()/2, getHeight()/2 );
    g.setRenderingHint ( RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_OFF );
} // paintComponent
public JPanel getUIPanel () {
    SpinnerModel degreesModel = new SpinnerNumberModel (
                                  degrees // initial
                                 ,0        // min
                                 ,360      // max
                                 ,2        // step
    degreesSpinner = new JSpinner ( degreesModel );
    degreesSpinner.addChangeListener ( new DegreesTracker() );
    JPanel panel = new JPanel();
    panel.add ( degreesSpinner );
    return panel;
} // getUIPanel
// DegreesTracker
private class DegreesTracker implements ChangeListener {
    public void stateChanged ( ChangeEvent e ) {
      Integer i = (Integer)((JSpinner)e.getSource()).getValue();
      degrees   = i.intValue ();
      repaint();
} // DegreesTracker
// main
public static void main ( String[] args ) {
    JFrame f = new JFrame ( "AngleText" );
    f.setDefaultCloseOperation ( JFrame.EXIT_ON_CLOSE );
    AngleText app = new AngleText();
    f.getContentPane().add ( app );
    f.getContentPane().add ( app.getUIPanel(), BorderLayout.SOUTH );
    f.setSize ( 200, 200 );
    f.setVisible ( true );
} // main
} // AngleText

How to draw vertical lines in SMART FORMS

Hi Guys,
Can anyone please let me know how to draw vertical and horizontal lines in smart forms, i have to do this in the secondary window.
thanks,
Ramesh

Hi Ramesh,
In the window output options you have option of check box to get lines.
Then you need to give the spacing for vertical and horizontal.
Another option is putting a template on window and getting the boxes, but it is quite little bit complex.
Put the cursor on the WINDOW in which the lines you want.
Right click on it>create>complex section.
In that select the TEMPLATE radio button.
Goto TAB TEMPLATE.
Name: give some name of line.
From: From coloumn.
To: To coloumn
Height: specify the height of the line.
Next give the coloumn widths.
Like this you can draw the vertical and horzontal lines.
If the above option doesnot workout then u can try the below option also
any how you can draw vertical and horizontal lines using Template and Table.
for Template First define the Line and divide that into coloumns and goto select patterns and select the required pattern to get the vertical and horizontal lines.
For table, you have to divide the total width of the table into required no.of columns and assign the select pattern to get the vertical and horizontal lines.
if this helps, reward with points.
Regards,
Naveen

How can I fill a table of objects from cursor with select * bulk collect???

Hi All, I have a TYPE as OBJECT
create or replace type dept2_o as object (
deptno NUMBER(2),
dname VARCHAR2(14),
loc VARCHAR2(13));
I can fill a table of objects from cursor with out select * bulk collect...., row by row
declare
TYPE dept2_t IS TABLE of dept2_o;
dept_o_tab dept2_t:=dept2_t();
i integer;
begin
i:=0;
dept_o_tab.extend(20);
for rec in (select * from dept) loop
i:=i+1;
dept_o_tab(i):=dept2_o(
deptno => rec.deptno,
dname => rec.dname,
loc =>rec.loc
end loop;
for k IN 1..i loop
dbms_output.put_line(dept_o_tab(k).deptno||' '||dept_o_tab(k).dname||' '||dept_o_tab(k).loc);
end loop;
end;
RESULT
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
But I can't fill a table of objects from cursor with select * bulk collect construction ...
declare
TYPE dept2_t IS TABLE of dept2_o;
dept_o_tab dept2_t:=dept2_t();
begin
dept_o_tab.extend(20);
select * bulk collect into dept_o_tab from dept;
end;
RESULT
ORA-06550: line 6, column 39;
PL/SQL: ORA-00947: not enough values ....
How can I fill a table of objects from cursor with select * bulk collect???

create or replace type dept_ot as object (
deptno NUMBER(2),
dname VARCHAR2(14),
loc VARCHAR2(13));
create table dept
(deptno number
,dname varchar2(14)
,loc varchar2(13)
insert into dept values (10, 'x', 'xx');
insert into dept values (20, 'y', 'yy');
insert into dept values (30, 'z', 'zz');
select dept_ot (deptno, dname, loc)
from dept
create type dept_nt is table of dept_ot
declare
   l_depts dept_nt;
begin
   select dept_ot (deptno, dname, loc)
     bulk collect
     into l_depts
     from dept
   for i in l_depts.first .. l_depts.last
   loop
      dbms_output.put_line (l_depts(i).deptno);
      dbms_output.put_line (l_depts(i).dname);
      dbms_output.put_line (l_depts(i).loc);
   end loop;
end;
/

I would like to know how to draw up a list in a cell (like a pull-down menu) to ease data capture, but I don't know how to do that ! Do you get the idea ? Thanks !

I would like to know how to draw up a list in a cell (like a pull-down menu) to ease data capture, but I don't know how to do that !
Do you get the idea ?
Thanks ever so much !

the numbers manual can be downlaoded from this website under the Apple support area...
http://support.apple.com/manuals/#numbers
What your looking for is written out step by step for drop downs and all other special types of user input starting around page 96 in the '09 manual.
Jason

How to draw filled polygons ?

Similar Messages

Maybe you are looking for