How to drill down into specfic row?

I am new to this website and to APEX, I have a question about having a report and when clicking on a row, it drill down to a page which only shows the row data about the clicked row.
Would be grateful if you tell me how to do that? I really need to know that..

Hi,
first i would create a master table and afterwords a detail table incl. foreign key (i.e. dept, emp). And then create a master detail form as i mentioned before. Further i recommend the documentation '2 Day + Developer's Guide' - see http://www.oracle.com/technetwork/developer-tools/apex/documentation/index.html
Regards,
Martin

Similar Messages

Drill down into a report

Hi!
I've been working on a report to be able to drill down into another "detailed" one, and I was able to do it but not exactly the way i needed.
I created an action link for the column values, but my problem is that for EVERY value, i always drill into the same exact report, and my idea is to drill into the same report for all of them, but with different parameters for each one
Example:
Sales representative revenue
John 230K
Mark 100K
Martin 500K
I've set a drill down for the revenue column, but all 3 values are obviously drilling into the same exact report, and I want to set it in a way I can tell the sub report "give me the detail report but only for the corresponding sales representative"
If i click on 230K, I want to see the "detailed report" only for John's oppties. If i click on 500K, I want to see the "detailed report" only for Martin's oppties. And so on...
That's the whole deal. I don't know how to do that.
Thanks for your help,
Martin

Hi, thanks for your answer
I'm navigating from a master to a detailed report, and i have already set the attribute as "is prompted" but Its not enough. Let me try to explain why
Lets say I have this example report:
Prompts: Primary position
Table:
Primary position | forecast
John | 768687
Paul | 200000
George | 923882
then I drill down on "Paul" to the next position level, so the report changes to something like this:
Primary position | secondary position | forecast
Paul | Jane | 100000
Paul | Martin | 100000
So, now... I want to drill into Martin's 100.000 forecast (drill into a detailed report) and despite I have the primary position set as "is prompted", I have no prompts for second, third, or n-position... So If I drill down from martin's 100000 forecast, I will only be able to pass the primary to the detailed report, and It will only be able to show Paul's 200000 forecast details
I want the detailed report to pull Paul for primary, Martin for secondary, and show only the detailed report for that 100000 forecast value
That's the issue
I hope I was clear enough
Thanks,
Martin

JDeveloper 2.0: Drilling down into a class

I can't drill down into a class by double-clicking on an object
node in the Structure pane. The Content pane should display the
source code for the ancestor class of that particular object.
Thanks in advance!
null

Hi
The doc for 'oracle.jdeveloper.servlet' can be found in the
JDeveloper Help System.
Launch the help system
and in the contents tab double click on 'JDeveloper 2.0 Reference
Documentation' book icon.
In the right hand frame select 'Oracle JBO Reference' link and
you can drill down further.
best regards
raghu
John Ritz (guest) wrote:
: Were can I find more detailed documentation for the classes in
: the 'oracle.*' packages? I'm specifically interested in how to
: use the classes in 'oracle.jdeveloper.servlet.*'
: and 'oracle.jdeveloper.html.*' packages. Some classes have a
: JavaDoc file but with little content, others have no
: documentation at all. Also Is the source code available for the
: classes in the oracle packages? Thanks for your help.
null

How to drill down and keep all my pivot table...

Hello experts!
I have a question about how to drill-down in pivot table. If I drill-down I can see the result in the same place...but it dissapear other bins or measures...
Example:
Pivot table:
A
B
C
If I click in A I can see:
a1
a2
a3
But I don't see B and C.
I would like to see when I click on A:
A
---a1
---a2
---a3
B
C
In my example I have a lot of bins to do drill-down...so it doesn't work for me to create three pivot tables and to do a union...
Is that possible? If you need more details you can post here...
Thank you!

Alex, this isn't another question. It looked like you were asking something different. That's why I said to start another thread. The bottom line is that OBIEE can't do what you are looking for.
But I think what is more important is not necessarily how to do what the OP wants, but what is the best way (read: most efficient, simplest, viable) to achieve the goal.
In this case, I think a better approach to your reporting is to use to Dashboard prompts. The first would be like Vehices (which has Cars, Trucks, Motorcycles, etc. in the drop-down window) and the second, constrained on the first, called Models/Brands (which has values dependent on what is chosen in the first prompt). With "All Choices" checked off in the prompt design, you have all the combinations a user needs to see in the pivot table. If the user chooses "Cars" from the first prompt, and "All Choices" in the second, then he/she will get all the car models displayed in the pivot table. Or, the user could select one particular moded from the start.
In fact, this is how many product web sites are set up. This gives the flexibility to the user and the report looks clean and efficient. You can have the drill down on the particular model (value interaction) if you wish to supply extra data on the particular model chosen.
I think this is the "correct" answer, Alex, though not the answer to the question you posed. Good luck.

How to Drill Down Between Queries

Hi Experts,
I am fairly new to developing reports, so at the current system there are 2 queries Summary(on a Cube) and Detail(on ODS). These are independent queries rt now. I want to pass Cost center and fiscal Period as parameters from Summary to Detail queries and make it a drill down report so that for each cost element we can get the document details. I have read the other posts relavant to how to drill down while passing parameters but dint understand much out of those.
Can anyone please lay down a step - step approach in doing this? Or share any kind of explanatory documents.
Thanks
Sarah

Hi Sarah,
Each response you have received so far is recommending the Report-Report Interface (RRI). It is a powerful and useful technique. It is simple to do (minutes) and it works in all current and future front-end environments.
The problem with using is that users need a little bit of training. And the results they get are ALWAYS exactly as the "receiver" query is displayed in its Global Definition.
If your users are using Excel and you want them to use a standard template workbook for the receiver, this is difficult (not impossible) to obtain because you need to "touch" each of their PCs and ensure that they have the correct settings on their PC each time you have an upgrade of the front-end (either BW upgrade or PC upgrade).
In most peoples' opinion, the benefits of RRI outweigh the disadvantages.
There is another option if you are using Excel. You can put both queries in a single workbook and use the Business Explorer Analyzer's API functions to create a "Jump" from query 1 to query 2.
You can set this up to occur every time that query 1 is refreshed. Or, your user can select one (or several) results from query 1 to make the jump to query 2.
The great disadvantage of this alternative approach is that it requires use of both Visual Basic and the BEx API functions. Not very many people are good at either one of these. But, they are simple to learn and once you do, there is no end to the amount of customization that can be obtained.
If you want more information about this approach, post again. Or, do a search on previous posts that I have made (from these you will find the names of others who are very knowledgeable in this approach as well.)
Also, here is a link to some examples of BEx API functions that accompany an article written by Joerg Boeke
http://www.bwexpertonline.com/downloads/boeke04.doc
- Pete

How the Drill down functionality works if the source is Bex Query

Dear All,
How the Drill down functionality works if the source is Bex Query through the query browser in Dashboard 4.1
Please let me know process.
Thanks
Regards,
Sai

Hi sai,
Drill down can be done by two ways.
1. you need to bring all the data in one shot to the spreadsheet and then by using the components you can achieve it. Below given link explains in detailed about that.
Filtering Through Combo Box
2. you can use different set of query to pass the value from one set to another to fetch the data using the prompt. please check the below which explain them.
Difference between "When value Becomes & When value Changes"
Revert any clarification required on this.
--SumanT

Drill-down into AWR reports

Hi experts,
any can help me in this topic Drill-down into AWR reports.

A typical AWR report - produced in html format- includes its main categories(for example Top 5 timed events) hyperlinked. By clicking on each one , you can navigate to a thorough analysis of all db parameters regarding it......
Anyway....Can you more specific of what exactly do you want...?????
Greetings...
Sim

Drill down into va22

It's a drill down into va22, I've done it the standard way, but
it fails:
set parameter id 'AUN' field t_tab-vbeln.
call transaction 'VA22' and skip first screen.
The set parameter executes okay, and if you F1, F9 on the
quotation field in va22 it says the parameter id is AUN.
However, it doesnt appear that it is AUN. If you set that
parameter id to '123' and then go to va22, it's still got the
last quote you used. If you then go to VA03, it's got '123' in
the order field.
I can only assume that sap's incorrectly reporting that AUN is
the parameter ID for VA22, would anyone know what it actually
is?

Hi,
AUN is displayed because this is specified in the data dictionary for
the used data element.
When defininte a dynpro field, based on this data element, the parameter
id AUN is proposed.
However, in the PBO of the dynpro, the actual Parameter id AGN is used.
Cheers,
Chaitanya.

How to drill down another one report on one field value of one row

Hi,
I have two reports that can link together on one field of respective database query command. The effect i want to reach is that when user clicks this field value on some row of one report, which i call source object, another report, target object, would use this value as input parameter and the page would jump to this linked report. I can see Format Editor provides Hyperlink feature when one field is edited, but i don't know how to associate another report as what i described here.
What if one the following conditions is met:
1.one of two objects, source object, is one chart object
2.target object is one chart object
3.two objects are both chart objects
Note: two objects is separately from different reports.
Additionally, is it possible to code for hyperlink functionality under both .NET WinForm and WebForm? what if under RDC?
Thank you
Zhi
Edited by: zhi li on Sep 24, 2008 11:53 AM
Edited by: zhi li on Sep 24, 2008 11:57 AM
Edited by: zhi li on Sep 24, 2008 11:58 AM

I don't know if you can use the hyperlink to call a subreport but the following has worked for me in Crystal 10:
1. In your main report create a group on the field you want to pass to the subreport.
2. In the Group Footer, use the "Insert Section below" menu command so that you have a Group Footer 1a and a Group Footer 1b.
3. Put your table fields in the Group Footer 1b section (this would be similar to your Details data).
4. Put the sub report in the Group Footer 1a section. Set up the links to the subreport from a table field in your main report.
5. Right-click on the sub-report, select "Format Sub-report". Click on the "x-2" button to the right of the Suppress option and enter "DrillDownGroupLevel = 0" in the "Formula Workshop-Formula Format Editor-Suppress" window and save it.
When you double-click on your data field (i.e. the field in Group footer 1b) it should drill-down and run your subreport.

How to drill down from summary report to detail report using RRI?

Dear all:
A problem about RRI. Please help me!
1.I create a BEx query 'Q1' to show summary data.
2.I create a BEx query 'Q2' to show detail data.
3.In Q1, all the products are shown each row.
       The 1st coulmn is 'Balance in the begin', it shows how many customer claim cases are opened before this week.
       The 2nd coulmn is 'New', it shows how many customer claim cases are initalized in this week.
       The 3rd coulmn is 'Close', it shows how many customer claim cases are closed in this week.
       The 4th coulmn is 'Balance', it shows how many customer claim cases are still opened now. And this column is calculated by this fomula as follow:
         'Balance in the begin' + 'New' - 'Close'
   4.In Q2, it lists each customer claim case. Include ClaimNo, Sold-To Party, ProductNo...
   5. I set Q1 as sender, Q2 as receiver.
   6. If I focus on the value of 'New' or 'Close' and then go to 'Q2', the correspond detail calim information in 'Q2'. But it is fail if I focus on the value 'Balance'.
   Why?
Thanks,
Jolin

I don't know if you can use the hyperlink to call a subreport but the following has worked for me in Crystal 10:
1. In your main report create a group on the field you want to pass to the subreport.
2. In the Group Footer, use the "Insert Section below" menu command so that you have a Group Footer 1a and a Group Footer 1b.
3. Put your table fields in the Group Footer 1b section (this would be similar to your Details data).
4. Put the sub report in the Group Footer 1a section. Set up the links to the subreport from a table field in your main report.
5. Right-click on the sub-report, select "Format Sub-report". Click on the "x-2" button to the right of the Suppress option and enter "DrillDownGroupLevel = 0" in the "Formula Workshop-Formula Format Editor-Suppress" window and save it.
When you double-click on your data field (i.e. the field in Group footer 1b) it should drill-down and run your subreport.

Dvt:pivotTable question how to drill-down?

Hello All,
How can I implement drill down functionality in <dvt:pivotTable>
with drillingEnabled=true
I need to know, when these get called
drillAction
drillRequestingListener
drillRequestedListener
get called
Thank you all

Can anyone please help here, how to implement drilling functionality with pivotTable,
<pivotTable IterBinding="InvoiceView1Iterator"
id="InvoiceView11"
xmlns="http://xmlns.oracle.com/adfm/dvt">
<pivotTableDataMap>
<columns>
<data>
<item value="EnteredAmt"/>
<item value="RetAmt"/>
<item value="RetTaxAmt"/>
</data>
</columns>
<rows>
<item value="CompCode"/>
<item value="BName"/>
</rows>
</pivotTableDataMap>
</pivotTable>
also, its not accesible in backing bean,
somebody please put some light on this dvt component
Thank you

How format drill down column?

Hi all,
We can format the column in report , but when drill down to another column2, how can i format column2?
Thanks!

Bring the second column into the Criteria Tab and Edit the Column format as per your needs. Once you ar done at the bottom Save the column 'as the system wide default for that column'. After saving remove the column from Criteria tab.
Next when u drill down to column 2 the formatting would appear automatically. Hope this helps!
Regards,
Bhavik
Edited by: bkjatania on Jul 15, 2010 9:15 PM

How to drill down the cause of "SQL*Net message from/to client"

Pretty frustrated with my tune up using suggestions from many papers for Oracle 10g R2 on AIX 5.3 L system. My users told me that the system (including Baan 5c) still responds slowly in some processes, some even worsen.
Using both queries such as
SELECT sid, schemaname, status FROM gv$session ORDER BY 2;
SELECT inst_id, seq#, event, p1, p2, p3, wait_time FROM v$session_wait_history WHERE sid=<sid from above>
INST_ID SEQ# EVENT P1 P2 P3 WAIT_TIME
1 1 SQL*Net message from client 1413697536 1 0 6419
1 2 SQL*Net message to client 1413697536 1 0 0
and others similar, I found very large numbers (almost 97%) of the sessions have events as “SQL*Net message to client” and “SQL*Net message from client” on their wait_time even the sids are in inactive status. After checking the meaning of those messages in Oracle Performance and Tuning document, the document states that mainly they are probably network problems. So How can I drill down to what status of network from my client (the users) to server by Oracle or AIX? In Baan, it has its own parameter sets in its db_resource file controlling the connectivity. In average, there are 4000 “opened cursor current”, but most of them inactives.
So my colleague asked me rollback all th changes I did on OS level such as minperm%=5
maxperm%=90
maxclient%=90,
lgpg_regions lgpg_size,
sys0 maxuproc=512,
aio0 maxservers='260'
and many ioo parameters to system defaults.
I even removed the mulitplex copy of the redo log.
I tried to proof them that there maybe the problem of the Baan/Oracle connectivity, ie due to message above,

http://docs.oracle.com ... read them for configuration information.
http://tahiti.oracle.com ... read them for recommendations.
http://otn.oracle.com ... find the best practices docs.
http://metalink.oracle.com ... look for similar issues to yours.
People that change things, on production boxes, without first determining that metrics indicate they are a good idea, and then determining their impact on a test box, should be sold to zoos as leopard food.
PS: Slowly likely has absolutely nothing to do with anything you touched. First you tune the application. Then you tune the database. Then you tune the operating system. Get out of the way and make the DBAs do their job.

How to drill down and stay on the dashboard

Hi:
OBIEE 11.1.1.6
I created an Action Link that calls another Answers report, and I display the report on a dashboard. The drill down works, but the target report opens in a new window. How can I provide this simple drill functionality but remain on the dashboard?
Thanks!

Hi,
by selecting "Drill in place" then it work as your expected way.
steps: just to edit that dashboard --> your dashboard page object section --> properties -->set it as "Drill In Place" save it and then test it.
Thanks
Deva

How to drill down when chart data = 0 ? (link to image attached)

Hi,
I've been trying to solve this issue for several time now: when i have a chart that contains additional data but the top-level data=0, the user is unable to click/hover to drill down and extract the 2nd level data.
https://docs.google.com/drawings/pub?id=1m30dxKe3PlMOJSIOV7CYsk_P1aLBRFqcVd2P1Xj_too&w=960&h=720
In the example above, the value boxes contain the 2nd level data that was drilled from the chart (The issue is with product E)
thanks
Edited by: Yair Gat on Dec 2, 2010 3:32 PM

Download this Drill Down.xlf file from here
[http://boprofessionals.com/posts/xcelsius/2/Drill%20Down.xlf]
rename it to xlf if its been as zip.
run it into your xcelsius
click on the chart Category labels (A, B, C, D, E)
good luck
Amr

How to drill down into specfic row?

Similar Messages

Maybe you are looking for