How to drop those CDC entries where CAPTURED_VALUES='UNKNOWN'

Hello,
I am using change data capture,
when I query :
select subscription_handle, subscription_status from procede_etl.HIG_CDC_VW where CAPTURED_VALUES='UNKNOWN';
SUBSCRIPTION_HANDLE SUBSCRIPTION_STATUS
22 ACTIVE
23 ACTIVE
24 ACTIVE
43 ACTIVE
42 ACTIVE
44 ACTIVE
41 ACTIVE
21 ACTIVE
How can I drop those entries which have CAPTURED_VALUES='UNKNOWN'?
Thanks
Jerry
Edited by: jerrygreat on Aug 18, 2009 10:47 AM
Edited by: jerrygreat on Aug 18, 2009 10:47 AM

jerrygreat wrote:
Hello,
I am using change data capture,
when I query :
select subscription_handle, subscription_status from procede_etl.HIG_CDC_VW where CAPTURED_VALUES='UNKNOWN';
SUBSCRIPTION_HANDLE SUBSCRIPTION_STATUS
22 ACTIVE
23 ACTIVE
24 ACTIVE
43 ACTIVE
42 ACTIVE
44 ACTIVE
41 ACTIVE
21 ACTIVE
How can I drop those entries which have CAPTURED_VALUES='UNKNOWN'?
Thanks
Jerry
Edited by: jerrygreat on Aug 18, 2009 10:47 AM
Edited by: jerrygreat on Aug 18, 2009 10:47 AMIf you see the rows you want to delete with
select  . . .  from procede_etl.HIG_CDC_VW where CAPTURED_VALUES='UNKNOWN';Then why would you not delete those rows with
delete from procede_etl.HIG_CDC_VW where CAPTURED_VALUES='UNKNOWN';

Similar Messages

  • I DON'T SEE FIREFOX ICONS OR FOLDER IN START MENU, DESK TOP OR TASK BAR. HOW CAN I INSTALL THOSE? OR WHERE I CAN START FIREFOX BROWSER?

    I DON'T SEE FIREFOX ICONS OR FOLDER IN START MENU, DESK TOP OR TASK BAR. HOW CAN I INSTALL THOSE? OR WHERE I CAN START FIREFOX BROWSER?
    How can I start or open Firefox?

    HI SBPARK,
    When you installed Firefox, did you uncheck the option to create a short cut?
    In order to pin to the toolbar, when you have Firefox open, right click on the icon in the bar and select "Pin to task bar".

  • I dropped my iPhone 4S and when I went to pick it up, the screen was black how do I fix it or where can I take it to get fixed in Adelaide South Australia?

    I dropped my iPhone 4S and when I went to pick it up, the screen was black how do I fix it or where can I take it to get fixed in Adelaide South Australia?

    Look under service
    https://locate.apple.com/au/en/
    https://locate.apple.com/au/en/service/?pt=1&lat=-34.92862119999999&lon=138.5999 594

  • I imported different trips to different catalogs on different external hard drives.  Later renamed external HDs.  I want to combine catalogs and have my source (NEF) files all together on one drive.  I'm not really sure how to get those source files back

    I imported different trips to different catalogs on different external hard drives.  Later renamed external HDs.  I want to combine catalogs and have my source (NEF) files all together on one drive.  I’m not really sure how to get those source files back and get rid of the extra long path to where the source files are now located. If I re-link files to their current catalog (many different paths to files in same catalog) can I merge (import catalogs) into one master catalog?  Will the new (Master catalog) have the correct link to the source file?  If not, how or can this be done?
    I have tried to explain my situation as clearly as I can.  Do you understand my situation?
    This maybe something you don’t have time to help me with.  If not can you suggest somewhere I can get an answer?  I really need help.  PLEEEZZZ HELP ME.
    Bruce Schuerman
    Norman, OK
    405_514-4875 (call collect)
    [email protected]

    Is there any solution (other than buying
    I really think 'buying' is the best solution on this one.  Ideally, you would have at least five internal hard drives.
    System
    Projects
    Cache/Scratch
    Media
    Exports
    Use externals and network drive only for backup.

  • How to delete the NULL entries in nest table

    Hi,
    After I used a loop and open/fetch cursor populated the object table
    I found there are random NULL entries in my object table (nest table)
    The data look like this
    NULL NULL           NULL
    NULL NULL           NULL
    123     03-MAY-04     ACTIVE
    NULL NULL           NULL
    NULL NULL           NULL
    234     21-MAY-04     ACTIVE
    NULL NULL           NULL
    345     11-MAY-04     ACTIVE
    NULL NULL           NULL
    How can I get rid of those NULL entries in my nest table? So it can become
    123     03-MAY-04     ACTIVE
    234     21-MAY-04     ACTIVE
    345     11-MAY-04     ACTIVE
    Additional info:
    create type myType as object
    (id NUMBER (10,0),
    eff_date date,
    status VARCHAR2(17)
    create type myNestTab as table of myType;
    I have tried Delete procedure in following two ways.
    Version 1:
    FOR i IN l_my_nest_tab.FIRST..l_my_nest_tab.LAST
    LOOP
    IF l_my_nest_tab(i).id IS NULL THEN
    l_curr_event_tb.DELETE(i);
                   END IF;                         
    END LOOP;
    Version 2:
    FOR i IN l_my_nest_tab.FIRST..l_my_nest_tab.LAST
    LOOP
    IF l_my_nest_tab(i) IS NULL THEN
    l_curr_event_tb.DELETE(i);
                   END IF;                         
    END LOOP;
    Both of them give me the error “no data found.” And only left me the first NOT NULL entry in the table.
    123     03-MAY-04     ACTIVE
    Thanks in avdance.

    Hi Vishnu,
    u can write a report program for this and in that use the event  :
    AT NEW <field-name> ( use primary key)
    your statements
    ENDAT
    for eg.
    loop at itab ( herfe itab must be of type of table for which u want to track new entries)
    at new matnr
    write:/ new record
    endat
    endloop.
    schedule this report in background to run in every 5 or 10 mins as per your requirement and hence changes can be tracked.
    regards
    Vinod

  • How to delete the total entries in ztable

    Hi ,
    How to delete the total entries in ztable...
    code pls.
    regards,

    Hi Venkat,
    pls see below records,
    Plant  Material                       Alternate material
    3770  00000000000126875          2020202
    3770  000000000005999335        2020202
    3770  117196                           2020202
    3780  00000000000126875           2020202
    3784  00000000000126875         2020202
    3784  000000000002809336       2020202
    3784  000000000005999335        2 020202
    3789  00000000000126875            2020202
    if  i write below syntax ,
    delete from ztable where matkl = '2020202'.
    all records contains  matkl = '2020202' will be deleted ??
    pls. reply.

  • How to get those Char Description when i record please give a solution

    Hi Experts
    when i try to extend using BDC the meterial all data is getting copied to new plant but in MRP3 Configure varients is not getting copied in bdc i am getting all the values from parent plant but these values are not getting displayed in new plant for only *MRP3 Configure varients
    how to get those values please give a solution
    and
    when i am trying to make the BDC recording of creation of meterial in this process
    in MRP3 when i give configurable meterial  = Lamp  or CT or VOLTMETER and when
    i go for configurevariants button it's not displaying any Char Description  for the perticular meterial
    but in general when i creat a material process  there Char Description  are coming where i can give the values
    how to get those Char Description when i record please give a solution

    Hi Maen Anachronos
    i am Getting popup where i can give any value
    but in creation of meterial for a perticular config meterial there is will be 1 templete in which we will get some constant  Char Description where we'll have some options to give the value
    but when it 's done in BDC Recording  it's not displaying any values Char Description then how can we decide the values to what to give when Recording

  • Best way to port all Windows XP files, applicaitons and data form my PC over to iMac and how to run those Windows apps on Mac?ns on Mac?

    I have a Windows XP machine with apps, files and data.  I want to get all that over to my Mac, and also run those apps under Windows XP or even Windows 7 on my Mac.  Im wondering:
    1.  How best to get those files over to my Mac
    2.  How to run those apps and use my Windows based files/data on my Mac
    3.  How best to run Windows on my Mac....either partitiion my Mac's hard drive and boot up either Windows or MAC OS, or run some other program where I can easily switch back and forth form Windows to MAC OS, or perhaps get it all on an external hard drive, maybe partition that Windows/MAC OS and boot from that?
    Thanks!

    I agree you would benefit by using virtualizaiton software. Virtual Box is one alternative the commercial apps for doing virtualization are Parallels and VMWare Fusion which you also might be interested in for their support and updates.
    Also you may benefit by book marking and using:
    Mac 101 , Switch 101 & Find Out How Video tutorials
    For your MS Office apps then I'd STRONGLY recommend using the native Office For Mac versions, you can find these on Amazon for less than $100 and then you can run the apps natively rather than having to lean on MS Windows. Also for your Financial and Tax software you also may want to use OS X apps too, for example I used Quicken for over 20 years (PC mostly and some Mac) but switched to iBank. Also for tax software I have used Quicken's Turbo Tax, this also runs natively on OS X.
    In other words for your stated needs I don't see much reason to stay with MS Windows. You may have other considerations, if you do please state them, some may be real issues and some may be easily overcome.

  • How to use CASE stmt in Where clause

    Hi,
    How to use CASE stmt in WHERE clause?. I need the code. Please send me as early as possible..........

    Hi,
    1004977 wrote:
    Hi,
    How to use CASE stmt in WHERE clause?. There's no difference between how a CASE expression is used in a WHERE clause, and how it is used in any other clause. CASE ... END always returns a single scalar value, and it can be used almost anywere a single scalar expression (such as a column, a literal, a single-row function, a + operation, ...) can be used.
    CASE expressions aren't needed in WHERE clauses very much. The reason CASE expressions are so useful is that they allow you to do IF-THEN-ELSE logic anywhere in SQL. The WHERE clause already allows you to do IF-THEN-ELSE logic, usually in a more convenient way.
    I need the code.So do the peple who want t help you. Post a query where you'd like to use a CASE expression in the WHERE clause. Post CREATE TABLE and INSERT statements for any tables used unless they are commonly available, such as scott.emp). Also, post the results you want from that sample data, and explain how you get those resuts from that data.
    See the forum FAQ {message:id=9360002}
    Please send me as early as possible..........As mentioned bfore, that's rude. It's also self-defeating. Nobody will refuse to help you because you don't appear pushy enough, but some people will refuse to help you if you appear too pushy.

  • How to identify manual journal entries

    Hello,
    In the GL tables, GL headers and GL Lines, how can we identify if a journal entry is an automated entry or a manual entry.
    That is, entries can be made into the General ledger through Interface programs or other import methods. We describe them as Automated.
    And if journal entries are made directly into the GL, how to identify them against the automated ones.
    I need to know from a backend perspective, i.e which column in which GL table specifies if an entry is a manual or an automated journal entry.
    For Ex: In the GL_JE_Headers table, the JE_Source and the JE_Category mentions from where the source is.
    Like, JE_Source is Payables and Je_Category can be Purchase Invoices or Payments.
    Looking at the above line, we can identify that this is an automated entry from Payables.
    How to identify the manual entries.
    Your help is greatly appreciated.
    Thank you
    Bob

    Hi Bob,
    In the GL_JE_HEADERS table, column JE_SOURCE would have value as "MANUAL", this indicates that journal is created manually in General Ledger module and not imported from subledgers ....There is no indicative column for us to identify whether it is Automatic or Manual .... values such as MANUAL and RECURRING indicates entries that were created directly in General Ledger Module...
    Also in the GL_JE_LINES table, for GL_SL_LINK_ID and GL_SL_LINK_TABLE coumns, the column values would be NULL/Blank, since these columns normally contains reference to the base transaction in the subledger ....for a manual transaction there wont be a reference to subledger, hence they would remain as blank ..
    Regards,
    Ivruksha

  • How revaluation works? What entries will be posted?

    Hi experts,
    How revaluation(G/L) works in SAP Business One? E.g.
    System Currency:SGD
    Invoice dated on 1st of December 2009, USD 100.00 with rate of 1.40 = SGD 140.00
    Company needs to revalue the outstanding invoice at 31st of December 2009 year end rate 1.5. Can SAP Business One takes in unrealized gain or loss, what is the standard procedure to perform this year end revaluation?
    Upon payment on 1st of February, the rate is 1.60. So, what would happen to next those unrealized entries that might be posted in SAP?
    Please advice.
    Thank you.
    Regards,
    Lim
    Edited by: Tou Lead Lim on Feb 26, 2010 8:37 AM

    Hi Tou,
    Normally you would use the Exchange Rate Difference functionality under Finance.
    This will revaluate any oustanding transaction for the BP and post the difference. You can do this on the report date. You have the option for an automatic reversal of this posting as it only fills a purpose on the reporting date. When the Invoice is paid the exchange rate will be posted automatically if you are using a version that is 2007 or higher.
    Again, as the exchange rate will be posted when the payment is done the transaction you posted on the reporting date should be reversed, this can be done with the automatic option, else the system will take this posting into consideratuion next time you run the exchange rate function so that the total balance in LC is correct.
    I hope it is somewhat clear.
    Jesper

  • How to create a service entry sheet based from the PO

    how to create a service entry sheet based from the PO
    Gurus,
    I am creating a service entry sheet from the PO but I am getting an error of u201CPlease maintain services or limits Message no. SE029- Diagnosis(You cannot enter data until the PO item has been maintained correctly) u201C
    The document type of the PO is standard NB, account assignment category is Q- (Proj make to order) and the item category is D(service). Then I am trying also create a PR using account assignment category is Q- (Proj make to order) and the item category is D(service) but still cannot proceed, a message asking me to enter a service entry number. What I know the process is create a PO(maybe based from PR) then post the GR then create a service entry sheet in ML81N but I cannot proceed. Just creating a PR or PO using those mentioned account assignment and item category and getting an error of need to enter a service entry sheet number.
    Please help.thanks!

    HI,
    Process for Creating Service Entry Sheet
    Transaction Code :    ML81N
    1)To open the respective Purchase Order, Click on the u2018Other Purchase Orderu2019, then enter the Purchase Order No.
    2)Click on the u2018Create Entry Sheetu2019 icon(3rd Icon on Top-Left)
    3)Give Short Text (e.g. R/A Bill No. 1) and top service entry sheet number also generated.
    4)Click u2018Service Selectionu2019 Icon on the Bottom of the Screen.
    5)For the 1st Time, when we are making Service Entry Sheet for a respective Purchase Order, we need to u201CAdopt Full Quantityu201D by clicking the Check box next to it, then Enter.  (*For the next time, no adoption is required, just continue)
    6)Select the respective Services by clicking on the Left Hand Side, then Click u2018Servicesu2019 (Adopt services) icon on the Top.
    7)Give the completed Quantity, then Click u2018Acceptu2019 icon(a green flag on the top)
    8)Save .
    9)Service Entry Sheet is SAVED and account posting made.
    Hope, it is useful for you,
    Regards,
    K.Rajendran

  • How to delete the Red Entries of EWA

    Hello All,
    I have some red entries of EWA which had failed during initial Setup of EWA. Now, everything is fine. How to delete those entries from Solution Monitoring-> EWA ->Operations page. It islooking messy

    Hi,
    You can delete the EWA sesision reports as per below
    On EWA screen ...Go to Menu
    GO TO >Sessions>Re-Oraganise-->Select required entries
    Execute and choose which all entries you want to delete.
    Regards,

  • How to retrieve the deleted entries

    Hi all
    I deleted some standard entries in the sand box related to item category determination in sand box.They are not stored in a change request. How can I revert back those deletd entries back into the system.
    Thanks
    Sonali

    No . I dont have IDES.
    I want to get back those deleted entries.
    Any help is appreciated.
    Thanks
    Sonali

  • How to clear previous data entries in sm30 transaction for table maintainen

    Whenever i maintain 8-10 records in sm30 for table maintenanace  and again when  I go to SM30 for entering new records i am able to view previous entries .
    then i click on new entries where data is cleared.
    Now what i need is i want to clear the data before clicking  "new entries".
    means for user it should appear as a fresh screen.
    is it possible if yes HOW?
    please anyone suggest me  way to do it immediately

    hi Nilesh,
    when u r clicking new entries data is not cleared but u r going to other screen,so it will apppaer as blank screen.If u want to delete all the records ,then write the logic in ur code.
    CASE SY-UCOMM.
    when 'NEWENTRIES'
    USe delete dbtable statemnt...then commit work.it will delete all the entries.
    ENDCASE.
    regards,
    Nagaraj

Maybe you are looking for