How to dynamically fix datagrid height by records in dataprovider?

i need to dynamically fix datagrid height by how many records
are contains in dataprovider (No Scrollbar), but when i attempt to
specific the row height, the row height is always out of i expected
and the scrollbar is appear, how can i do that?

You can set rowCount instead of height.
Tracy

Similar Messages

How do I fix bad Quality audio recording in Captivate 4

I am having trouble recording decent quality audio in Captivate 4.
What is happening is after I do the screen and audio recording when I play it back the audio is choppy.
It also kind of sounds like the audio is quickly echoed and then clipped.
Finally this clipping and choppiness seems random when it happens.
I tested this by recording 5 minutes of the demonstration (which recorded with only 1 glitch in the beginning).
When I just recorded the second half when I played it back in Captivate it was very choppy again throughout the audio making the complete session unusable.
I am doing full motion recording of an application at 1024x768. I have tried all audio recording bitrates and have even gone up to 128kbps 16bit mp3.
I am using a high quality Audio-Technica AT2020 USB microphone.
I am running Windows Vista Service pack 2 fully updated with 4GB of memory on an Intel xeon W3503 2.4Ghz in 64 bit mode.
I have installed the latest patch update http://www.adobe.com/support/captivate/downloads.html 4.4.0.1 hoping that it waould solve the audio bugs to no avail.
Please let me know what else I may need to do to get Captivate 4 working like it should.
Are there any other settings or tests I should perform to get audio recording working.
Why would I even want to pay for Captivate 5 if Captivate 4 has worked so randomly for me.
Using 3rd party software like Audacity and even Adobe Soundbooth seems absurd when Captivate has audio recording built in.
For the time being I have gone back to Camtasia on another system because it actually seems to work but need to get Captivate working on my own system.

Try "Rapid Recorder" from store....it works well.

How can we enter the data dynamically from datagrid to an arraycollection?

Hi All
                    How can we make datagrid fields editable when it is in empty position i mean the datagrid doesn't have any data to display.. and it must accept the data and update the arraycollection dynamically..
             Now in my Application the datagrid is empty and it is not accepting any values and it still remain ideal.. i am unable to edit the datagrid fields in the datagrid .....
Please some one tell me how can i achieve this...

Here is a very basic example.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="onCreationComplete()">
<mx:Script>
<![CDATA[
   import mx.collections.ArrayCollection;
   [Bindable] private var _dataProvider:ArrayCollection;
   private function onCreationComplete():void {
    _dataProvider = new ArrayCollection();
    for(var i:int = 1; i <= 100; ++i)
     _dataProvider.addItem({ROW:i,A:"",B:"",C:"",D:"",E:"",F:"",G:"",H:"",I:"",J:"",K:"",L:"", M:"",N:"",O:"",P:""});
]]>
</mx:Script>
<mx:Panel title="Editable DataGrid Example" height="472" width="584" horizontalCenter="0" verticalCenter="0">
<mx:DataGrid id="dg" width="100%" height="100%" rowCount="5" dataProvider="{_dataProvider}" editable="true" horizontalScrollPolicy="on" sortableColumns="false" draggableColumns="false">
   <mx:columns>
    <mx:DataGridColumn dataField="ROW" headerText="" width="30" sortable="false" draggable="false" editable="false" paddingLeft="0" paddingRight="0" textAlign="right"/>
    <mx:DataGridColumn dataField="A" headerText="A" width="100"/>
    <mx:DataGridColumn dataField="B" headerText="B" width="100"/>
    <mx:DataGridColumn dataField="C" headerText="C" width="100"/>
    <mx:DataGridColumn dataField="D" headerText="D" width="100"/>
    <mx:DataGridColumn dataField="E" headerText="E" width="100"/>
    <mx:DataGridColumn dataField="F" headerText="F" width="100"/>
    <mx:DataGridColumn dataField="G" headerText="G" width="100"/>
    <mx:DataGridColumn dataField="H" headerText="H" width="100"/>
    <mx:DataGridColumn dataField="I" headerText="I" width="100"/>
    <mx:DataGridColumn dataField="J" headerText="J" width="100"/>
    <mx:DataGridColumn dataField="K" headerText="K" width="100"/>
    <mx:DataGridColumn dataField="L" headerText="L" width="100"/>
    <mx:DataGridColumn dataField="M" headerText="M" width="100"/>
    <mx:DataGridColumn dataField="N" headerText="N" width="100"/>
    <mx:DataGridColumn dataField="O" headerText="O" width="100"/>
    <mx:DataGridColumn dataField="P" headerText="P" width="100"/>
   </mx:columns>
</mx:DataGrid>
</mx:Panel>
</mx:Application>
Hope this helps

My midi performances are being recorded at a velocity of 98 no matter how I play it. What's happening, how can I fix this? Thanks!

my midi performances are being recorded at a velocity of 98 no matter how I play it.
What's happening, how can I fix this? Thanks!
Frank

my midi performances are being recorded at a velocity of 98
Do you use "Caps Lock" cause your description reminds me of its default velocity setting?
If yes, keep in mind that your computer keys are note velocity sensitive! There are a few keys in the "Caps Lock" which can be used to set the velocity output to some fixed dynamic values like "pp", "mf", "FF". Another scenario is to patch a Transformer between the Logic Physical Input & the Sequencer and set the Transformer to randomize the velocities, but it is not the same like using an external midi hardware controller which is velocity sensitive.
A.G
www.audiogrocery.com
Author of: Logic GUI Deluxe(Free),
Vox De Bulgaria - s.a.g.e vocal pack for RMX,
Logic Snapshot Console,
RMX Power CTRL - Logic Environment Midi editor for Stylus etc.

How to fix the height of the details section in crystal reports.

hi all
How to fix the height of the details section in crystal reports.

Thanks for your reply
i didnt get the clear idea about your answer can you explain it once with example
why iam asking is when i add a new details section according to you answer maintaining same height of the two details sections and i see the preview the iam getting gap between each record. this is so because one record from details section1 and another empty space from details section2
like
Details section A-contains records
Details section B- no records
Details section A-contains records
Details section B-no records
Then how will i solve my issue
Thanks in advance

HT4314 I have 4 iPads and one apple Id. Two the devices record clash of clans and dragonvale individually and the other two are tied to the other two. Drives my kids nuts. How do I fix this?

I have 4 iPads and one apple Id. Two the devices record clash of clans and dragonvale individually and the other two are tied to the other two. Drives my kids nuts. How do I fix this?

Also, I'd prefer to keep the same ID on both so I will keep access to my calendar/contacts/etc on both devices. Would I be able to share reminders and voice memos and the like as well? And how often would they update each other? If I edit a contact on the 5, and the 4 is in wifi, assuming they're both on my same ID, will the contact update on the 4?

How do i fix the following message that appears when i open my computer :- Apple Sync Notifier.exe Entry Point not found the procedure entry point sqlite3_wal_check point chould not be located in the dynamic link library SQLite3.dll

Apple Sync Notifies,exe.Entry point not found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have uninstalled Itunes 10.4 shut down and installed Itunes 10.4 and still get this message on opening? How do i fix this problem?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

When plugging in the iphone to itunes it says the pairing record is not there. How do i fix this

When plugging in iphone to itunes it says the pairing record is not there. This was an existing phone in the software before. How do I fix this

Try rebooting your computer first.

When i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

when i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

I need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll HOW DO I FIX THIS?

i need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll HOW DO I FIX THIS?

Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy

When I start up the computer, the dialogue box opens and saying that the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I redownload itunes, but the problem still persists. How can I fix this?

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Error message states iTunes could not connect because paring record is missing, how do I fix?

Error message states iTunes could not connect because paring record is message is missing, how do I fix?

Sometimes rebooting your PC can clear this error message. You might also want to try plugging the iPod into a different USB port as well.
Others have been able to fix it by unplugging their iPod from their PC, signing out their Apple ID on their iPod Touch, signing back in and reconnecting it.
B-rock

How do i fix pairing record is missing

I have the latest iTunes and the latest iPod Touch OS. I connected my iPod to the computer for the first time and got the message "iTunes could not connect to the iPod "Larry's iPod" because the pairing record is missing.
How to I fix that problem.
Also, when I connect the iPod to the computer using the USB cable connection tothe computer, it does not sync the songs.
How do Ialso fix that.
My computer OS is Windows 7.

NushNush18, did you notice that the post is over 1 1/2 years old. I do not think the poster is still waiting for a solution.

Connecting Garage Band to Mbox. It's now in input/output, but no sound, recording or visual gain in volume. How do I fix this?

That's it. I followed instructions in a PDF provided by avid (pro Tools) that was very helpful for GB and 3rd party. If you need the link let me know.
But....
Even though "digidesign Mbox 2" shows up now in the input & output...there is still no sound from the headset on the MAC, no visual peaks or volume showing on the recording gain meter and when I hit record, nothing records. How can I fix this????
Seems like a lot of questions regarding the mbox. I would think there would be a "how to" that's easy to follow, as we're all in the same boat. Any leads on this too?
G

In garageband preferences choose the mbox as input and the computers built in output for output. Use a real or guitar track. Choose the correct input channel and turn on monitoring in the track info window. Make sure track is record enabled.
Make sure the gain is turned up enough on the mbox.

Itunes has message no pairing record how do i fix this please

Just upgraded iphone software to latest version
pluged into pc itunes opens and has a message NO paired file available for sues iphone
any clkues as to how i fix this please
itunes has message no pairing record how do i fix this please

Might help to start by providing the exact wording of the message. What is provided above simply is not what iTunes is saying, no such message appears in iTunes.

How to dynamically fix datagrid height by records in dataprovider?

Similar Messages

Maybe you are looking for