How to fix the height of the details section in crystal reports.
hi all
How to fix the height of the details section in crystal reports.
Thanks for your reply
i didnt get the clear idea about your answer can you explain it once with example
why iam asking is when i add a new details section according to you answer maintaining same height of the two details sections and i see the preview the iam getting gap between each record. this is so because one record from details section1 and another empty space from details section2
like
Details section A-contains records
Details section B- no records
Details section A-contains records
Details section B-no records
Then how will i solve my issue
Thanks in advance
Similar Messages
-
hi so my payment was declined in itunes store and i dont know how to fix this problem,but all details entered correct....so whats the story?
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
How to stretch the height of the table dynamically?
Hi,
I am using JDeveloper 11.1.1.4.0.
I have created summary details page screen where i have to show the non-editable grid at the top portion and respective editable form fields at the bottom portion.
Requirement:
Based on the free form height, rest of the screen area should be occupied by the non-editable grid automatically.
Tried:
1. I have a vertical panel splitter. Also set the dimensionFromEnd to true.
2. Added panelStretchLayout inside both the first facet and second fact of panel splitter.
3. Placed the grid inside the first facet's panelStretchLayout (Inside centre facet)
4. Placed the free form inside the second facet's panelStretchLayout (Inside centre facet)
By having the above structure and setting splitter position, i am able fix the height for the free form and to get my grid occupied the remaining space.
Question:
How can i achieve the same without specifying the splitte position?
Thanks in Advance.
PerumalHi
can you check this
<af:panelStretchLayout id="psl1" styleClass="AFStretchWidth">
<f:facet name="bottom"/>
<f:facet name="center">
<af:panelTabbed id="pt1">
<af:showDetailItem text="#{edmsBundle.EMAIL}" id="sdi1"
stretchChildren="first" disclosed="true" <--------- this tab width is full but height is not
inlineStyle="height:9000.0px;">
<af:panelSplitter id="ps1">
<f:facet name="first">
<af:region value="#{bindings.emailconfig1.regionModel}" id="r1"/>
</f:facet>
</af:panelSplitter>
</af:panelTabbed>
</f:facet>
<f:facet name="start"/>
<f:facet name="end"/>
<f:facet name="top"/>
</af:panelStretchLayout> -
How can I manually change the height of the "Type ...
Hi all
Just got automatically installed the latest 6.22 version of skype few minutes ago and I got a few questions.
First and foremost, how can I MANUALLY change the height of the textbox, where I type the messages. I would like to make it larger, like in the previous versions of skype. I don't want to move my mouse cursor through the entire monitor to reach this tiny textbox.
And second, why you guys are trying constanly to ruin something that is working perfectly ? Going to revert to the previous version until you fix all these nuisances.
RegardsThere is no way to do this, it is designed to be strictly landscape with keyboard, portrait without - not the best thought-out phone on the market, mainly geared towards compulsive texters and e-mailers.
There's no way to know whetherNokia will change this with any future updates, perhaps you should make the recommendation to them directly using the 'contact us' link. -
I recently updated from FF28 to FF31. Totally different UI, I get that. I waited to update until I could psych myself to try something different. I have the Default Australis Theme and Noia Fox Theme, which is designed with larger icons/buttons for those with visual needs. On my screen at the moment I have the title bar, menu bar, tab bar, and url/addon bar with the "hamburger" menu to the right. I placed icons in the menu bar, kept the home icon on the addon bar, and then there are the default icons in the menu popup. When I enable the Noia Fox Theme, the icons look great on the url/addon bar, even in the menu popup; clear, large, easy to see. However, the icons in the menu bar (not the menu popup) are less than half their original/intended size. So I switch to default Australis Theme, restart, and same issue, though not quite as dramatic since Default theme is smaller to begin with.
My thinking then is that there is a setting within the menu bar which resizes the icons/buttons to a small default size. Can this setting be changed to allow the icons to retain their original size (or close to it) and if so, how? I like the location of the menu bar on my screen, below the title bar, above the tab bar. Works nicely with the new The Fox Only Better addon which attaches to the tab bar and hides the url bar, a "new" feature for me and I'm liking it. I know I can get CTR with an additional bar, and I did try that. The issue then is that the additional bar appears below the tab bar and is not movable to above the tab bar and below the title bar.
At the moment, I have just the two themes, security addons added and The Fox Only Better. I've not added other appearance addons yet so as to keep potential conflicts/issues to a minimum. I've not tinkered with internal FF default settings other than to say don't track me (I think that's all I did). So to the best of my limited understanding, I've kept changes and customizations to a minimum. And yes, per your educated guess feature for questions posted, I am running Win 8.1 and FF 31.
I think I've offered enough detail so others can try to duplicate the issue. If not, let me know and I'll try to respond as soon as I can. Thanks so much for any help offered.
~ wkothlowYou can double the height of the menu bar area using a custom style rule. I couldn't immediately find an icon that would take advantage of the space so I'm not sure this will solve the problem, but you could try it.
The custom style rule could be as simple as:
@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
/* double height (from 2x to 4x the 13px base font size) */
#toolbar-menubar{
height:4em !important;
(Result shown in the screen shot, using the preview feature of the Stylish extension.)
You can apply custom style rules to Firefox's UI using either of these methods:
(1) Create or edit a userChrome.css file. This article has more information: http://kb.mozillazine.org/UserChrome.css
(2) Use the Stylish extension: https://addons.mozilla.org/firefox/addon/stylish/
Since I don't have this theme to test myself, if this doesn't work well, you might contact the theme author using the theme's support thread, which is on an independent forum: http://forums.mozillazine.org/viewtopic.php?f=48&t=2230157 -
how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).
The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them. -
My Ipad wont retrieve my new emails and if I try to check passwords in Settings, the settings window only stays open open for a second or two and the automatically closes. Any help on how to fix. I tried the turn off and on trick and that didn't work either. Thanks for any help.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I created a Pages document inserting 2 columns using 1) Inspector 2) Layout 3) columns. How do I decrease the height of the column. Have tried to use the cursor and drag down the top border, but that does not reset/decrease the top border.
Set your columns back to one for the moment. In layout mode, insert a Text box. Place it in the upper left corner of your document, and drag down and right to the size of the container for your two columns. Click inside the Text Box, and now bump up your columns to 2. Your two columns are now contained in this resizable Text Box.
-
I want to make the item text of the combobox to be aligned vertically(Centred) . Actually I increased the height
of the combobox and after the increasing the combobox height, the text is not centred vertically.The code
snippet for increasing the height is as follows,
m_SpecifyCombo.SetItemHeight(-1,20);//CCombobox m_SpecifyCombo
After increasing the height the text in the combobox is not in the centre as shown in the below image,
But I want the text to be centred as shown in the below image.
Code snippet for owner drawn combobox:
#if !defined(AFX_CUSTCOMBOBOX_H__F8528B4F_396E_11D1_9384_00A0248F6145__INCLUDED_)
#define AFX_CUSTCOMBOBOX_H__F8528B4F_396E_11D1_9384_00A0248F6145__INCLUDED_
#if _MSC_VER >= 1000
#pragma once
#endif // _MSC_VER >= 1000
typedef enum {FONTS} STYLE; //Why have I enumerated, Cos, Maybe I might want something other than Fonts here
class COwnerDrawCombo : public CComboBox
// Construction
public:
COwnerDrawCombo();
COwnerDrawCombo (STYLE);
// Attributes
public:
void SetHilightColors (COLORREF hilight,COLORREF hilightText)
m_clrHilight = hilight;
m_clrHilightText = hilightText;
void SetNormalColors (COLORREF clrBkgnd,COLORREF clrText)
m_clrNormalText = clrText;
m_clrBkgnd = clrBkgnd;
static BOOL CALLBACK EnumFontProc (LPLOGFONT lplf, LPTEXTMETRIC lptm, DWORD dwType, LPARAM lpData);
void FillFonts ();
int GetSelFont (LOGFONT&);
// Operations
public:
// Overrides
// ClassWizard generated virtual function overrides
//{{AFX_VIRTUAL(CCustComboBox)
public:
virtual void DrawItem(LPDRAWITEMSTRUCT lpDrawItemStruct);
virtual void MeasureItem(LPMEASUREITEMSTRUCT lpMeasureItemStruct);
protected:
virtual void PreSubclassWindow();
//}}AFX_VIRTUAL
// Implementation
public:
virtual ~COwnerDrawCombo();
// Generated message map functions
protected:
STYLE m_enStyle;
COLORREF m_clrHilight;
COLORREF m_clrNormalText;
COLORREF m_clrHilightText;
COLORREF m_clrBkgnd;
BOOL m_bInitOver;
void DrawDefault (LPDRAWITEMSTRUCT);
void DrawFont(LPDRAWITEMSTRUCT);
void InitFonts ();
//{{AFX_MSG(CCustComboBox)
afx_msg int OnCreate(LPCREATESTRUCT lpCreateStruct);
afx_msg void OnDestroy();
//}}AFX_MSG
afx_msg long OnInitFonts (WPARAM, LPARAM);
DECLARE_MESSAGE_MAP()
//{{AFX_INSERT_LOCATION}}
// Microsoft Developer Studio will insert additional declarations immediately before the previous line.
#endif //!defined(AFX_CUSTCOMBOBOX_H__F8528B4F_396E_11D1_9384_00A0248F6145__INCLUDED_)
// OwnerDrawCombo.cpp : implementation file
#include "stdafx.h"
#include "combobox.h"
#include "OwnerDrawCombo.h"
#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif
#define WM_INITFONTS (WM_USER + 123)
//I chose 123 cos nobody might use the same exact number.. I can improve this by use RegisterWindowMessage..
// COwnerDrawCombo
//Initial values of the text and highlight stuff
COwnerDrawCombo::COwnerDrawCombo()
m_enStyle = FONTS;
m_clrHilight = GetSysColor (COLOR_HIGHLIGHT);
m_clrNormalText = GetSysColor (COLOR_WINDOWTEXT);
m_clrHilightText = GetSysColor (COLOR_HIGHLIGHTTEXT);
m_clrBkgnd = GetSysColor (COLOR_WINDOW);
m_bInitOver = FALSE;
COwnerDrawCombo::COwnerDrawCombo (STYLE enStyle)
m_enStyle = enStyle;
m_clrHilight = GetSysColor (COLOR_HIGHLIGHT);
m_clrNormalText = GetSysColor (COLOR_WINDOWTEXT);
m_clrHilightText = GetSysColor (COLOR_HIGHLIGHTTEXT);
m_clrBkgnd = GetSysColor (COLOR_WINDOW);
m_bInitOver =FALSE;
COwnerDrawCombo::~COwnerDrawCombo()
BEGIN_MESSAGE_MAP(COwnerDrawCombo, CComboBox)
//{{AFX_MSG_MAP(COwnerDrawCombo)
ON_WM_CREATE()
ON_WM_DESTROY()
//}}AFX_MSG_MAP
ON_MESSAGE (WM_INITFONTS,OnInitFonts)
END_MESSAGE_MAP()
// COwnerDrawCombo message handlers
void COwnerDrawCombo::DrawItem(LPDRAWITEMSTRUCT lpDrawItemStruct)
//I might want to add something else someday
switch (m_enStyle)
case FONTS:
DrawFont(lpDrawItemStruct);
break;
//I dont need the MeasureItem to do anything. Whatever the system says, it stays
void COwnerDrawCombo::MeasureItem(LPMEASUREITEMSTRUCT lpMeasureItemStruct)
void COwnerDrawCombo::DrawFont(LPDRAWITEMSTRUCT lpDIS)
CDC* pDC = CDC::FromHandle(lpDIS->hDC);
CRect rect;
TRACE0 ("In Draw Font\n");
// draw the colored rectangle portion
rect.CopyRect(&lpDIS->rcItem);
pDC->SetBkMode( TRANSPARENT );
if (lpDIS->itemState & ODS_SELECTED)
pDC->FillSolidRect (rect,m_clrHilight);
pDC->SetTextColor (m_clrHilightText);
else
pDC->FillSolidRect (rect,m_clrBkgnd);
pDC->SetTextColor (m_clrNormalText);
if ((int)(lpDIS->itemID) < 0) // Well its negetive so no need to draw text
else
CString strText;
GetLBText (lpDIS->itemID,strText);
CFont newFont;
CFont *pOldFont;
((LOGFONT*)lpDIS->itemData)->lfHeight = 90; //9 point size
((LOGFONT*)lpDIS->itemData)->lfWidth = 0;
newFont.CreatePointFontIndirect ((LOGFONT*)lpDIS->itemData);
pOldFont = pDC->SelectObject (&newFont);
pDC->DrawText(strText, rect, DT_LEFT | DT_VCENTER | DT_SINGLELINE);
pDC->SelectObject (pOldFont);
newFont.DeleteObject ();
void COwnerDrawCombo::InitFonts ()
CDC *pDC = GetDC ();
ResetContent (); //Delete whatever is there
EnumFonts (pDC->GetSafeHdc(),NULL,(FONTENUMPROC) EnumFontProc,(LPARAM)this);//Enumerate
m_bInitOver = TRUE;
BOOL CALLBACK COwnerDrawCombo::EnumFontProc (LPLOGFONT lplf, LPTEXTMETRIC lptm, DWORD dwType, LPARAM lpData)
if (dwType == TRUETYPE_FONTTYPE) //Add only TTF fellows, If you want you can change it to check for others
int index = ((COwnerDrawCombo *) lpData)->AddString(lplf->lfFaceName);
LPLOGFONT lpLF;
lpLF = new LOGFONT;
CopyMemory ((PVOID) lpLF,(CONST VOID *) lplf,sizeof (LOGFONT));
((COwnerDrawCombo *) lpData)->SetItemData (index,(DWORD) lpLF);
return TRUE;
int COwnerDrawCombo::OnCreate(LPCREATESTRUCT lpCreateStruct)
if (CComboBox::OnCreate(lpCreateStruct) == -1)
return -1;
// TODO: Add your specialized creation code here
if (m_enStyle == FONTS)
//SetItemHeight(-1,30);
PostMessage (WM_INITFONTS,0,0);
return 0;
long COwnerDrawCombo::OnInitFonts (WPARAM, LPARAM)
InitFonts ();
return 0L;
void COwnerDrawCombo::OnDestroy()
if (m_enStyle == FONTS)
int nCount;
nCount = GetCount ();
for (int i = 0; i < nCount; i++)
delete ((LOGFONT*)GetItemData (i)); //delete the LOGFONTS actually created..
// TODO: Add your message handler code here
CComboBox::OnDestroy();
void COwnerDrawCombo::FillFonts ()
m_enStyle = FONTS;
PostMessage (WM_INITFONTS,0,0); //Process in one place
int COwnerDrawCombo::GetSelFont (LOGFONT& lf)
int index = GetCurSel ();
if (index == LB_ERR)
return LB_ERR;
LPLOGFONT lpLF = (LPLOGFONT) GetItemData (index);
CopyMemory ((PVOID)&lf, (CONST VOID *) lpLF, sizeof (LOGFONT));
return index; //return the index here.. Maybe the user needs it:-)
void COwnerDrawCombo::PreSubclassWindow()
// TODO: Add your specialized code here and/or call the base class
//Tried to do what Roger Onslow did for the button.. Did not work..?? Any R&D guys around :-)
Can anyone please let me know how can I achieve this.
Any help can be appreciated.
Thanks in advance
SivaVHi sivavuyyuru,
I cannot find a easy way to make this.
I think you may need to draw your own Combo Box control. And you could change the edit control more like static text. Check the article:
http://www.codeguru.com/cpp/controls/combobox/fontselectioncombos/article.php/c1795/Owner-Drawn-Font-Selection-Combobox.htm
In the resource editor, Owner draw -> variable , Has string->true, type->drop list.
The result:
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. This occurs in the internet explorer and chrome browse but not in foxfire
How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. This occurs in the internet explorer and chrome browse but not in foxfire
-
Fixing the height of the maon area of a table in the main window in smartfo
hi all,
I have a requirement where I need to fix the height of the main area of a table in the main window in a smartform.Hi,
If you need to fix the height of the main area of a table on a page.
Then use a loop node to loop the table with 1 to 6 rows and under the loop node make us of a template for displaying the fixed no of rows.
Regards,
Ram -
How to increase the height of the text field in Adobe Central
How do I increase the height of the text field in Adobe Central? I know how to change the font size but visually the height of the text field (<0.5cm) looks too small.
I want to be able to print the form and fill it out by hand. But the text field height is too small.
Please help.
Thanks
GenHi;
Are you saving your form as a PDF from FormsCentral to distribute the PDF form?
In the FormsCentral form authoring tools you do not have control over the size of the field. If you are using a PDF however you can edit that PDF in Acrobat after saving from FormsCentral and can edit the size, border, color etc of the fields.
If you want to edit a FormsCentral PDF you'll want to review this FAQ:
http://forums.adobe.com/docs/DOC-3661
Thanks,
Josh -
How to repeat a background image to cover the height of the page?
Hi
I have a page with an image alinged to the top in a table and
I have a pattern in the background of the cell in the same table
I need that background of the cell to repeat it self along
the height of the page, so when someone views the page at a higher
resolution, the background image will repeat it self to cover the
extra space.
I've tried setting the height of the table to percentage, but
the table doesn't cover the height of the page.
I could also make the table really long so when viewed at
higher resolution there wont be any blank space at the bottom, but
this makes an unnecessary and long scroll when viewed at lower
resolution.
Someone told me to use css but i have now idea how to
implement that.make sure you have set your page margins to 0 if you don't
want the default
margin top left. Cut and paste the following into the head of
your document
just before the closing </head> tag.
then if you want to repeat a background image in a cell, you
need to create
a rule to do this:
.cellback {
/*this repeats the image across the page horizontally*/
/* if you want to repeat down the page, then change to
repeat-y */
background: url(pics/whatever.gif) repeat-x;
you can combine this background image rule with the other
margin setting so
you have:
<style type="text/css">
<!--
body {
margin: 0;
padding:0;
.cellback {
background: url(pics/whatever.gif) repeat-x;
-->
</style>
You then apply to the class to your cell
<td clas="cellback">
Examples here:
http://www.dreamweaverresources.com/tutorials/pagebackgrounds/cellbackground.htm
this shows how to use a background image for your entire
page:
http://www.dreamweaverresources.com/tutorials/pagebackgrounds/examplehor.htm
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.perrelink.com.au
- Web Dev
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.adobe.com/devnet/dreamweaver/css.html
> I have a page with an image alinged to the top in a
table and I have a
> pattern
> in the background of the cell in the same table
> I need that background of the cell to repeat it self
along the height of
> the
> page, so when someone views the page at a higher
resolution, the
> background
> image will repeat it self to cover the extra space. -
How can I change the height of the input box in a...
How can I change the height of the input box in a new version of Skype?
Solved!
Go to Solution.
Attachments:
Skype_input_box.png 4 KBlucasbgme wrote:
I've tried 6.1.0.129
6.1.0.129 version is disabled. All Skype versions older than 6.14 are now retired and can no longer be used. You can try to install the 6.21.0.104 version:
http://download.skype.com/msi/SkypeSetup_6.21.0.104.msi -
How can i increase the height of the navigation toolbar to make my persona more visible?
adding toolbars puts them all below the navi bar and it looks weird.
i know this has been asked many times but the answer's always "add toolbars".Look here.
http://support.apple.com/kb/index?page=answerlink&url=http%3A%2F%2Fsupport.apple .com%2Fkb%2FHT1495&answerid=16777216&src=support_site.home.search
Maybe you are looking for
-
Sales Group field should come in to S_ALR_87012178 AR report
Hi, 1.Is it possible to bring the *Sales Group field from billing document to S_ALR_87012178 AR report. Actually we have pulled Sales group field from billing document to FBL5N report.But client dont want that.He wants Sales group field in S_ALR_8701
-
Hi All, i am working on the concepts of archiving.I wanted to know whether I can create the archive files on my local machine by creating a logical path mapped to a a local path and file name in FILE Transaction. Thanx in advance.
-
Multiple payment terms for receivables
Hello dear SAP experts, I need anysorta solution for my payment term setting problems (erp 4.6 / 6.0). For one of our area need set up this payment terms: due date - 60 days, terms are 6% discount in case of payment in 10 days, 5% discount in 20 d
-
Prog for debit memo in payment method
hi what is the program to be used for the debit memo in the payment method configuration? Is it different for different countries or it is standard for all countries? Normally there are 3 programs i.e., RFFOUS_C , RFFOAVIS & RFFOEEDI1. In this firs
-
Procedure to Assign Inspection Plan and to Execute it
Dear All, pls explain me the step by step procedure to ceate an inspection plan and assigning it to an manufactured item and also explain me how to clear the goods from QM after the production confirmation. Regards, Srini