How to dynamically set a bounded value for a VO at runtime

Hi all,
I am working on a custom page for time card summary, the VO's query like this:
select Timecard_Id,.... from timecard_summary where supervisor_id = :1
There is a utility that can retrieve supervisor_id from system, but I don't know how I can set this supervisor_id before the query is execute, I think I need a controller to do that right after user clicks "Go" button in simpleSearch Panel, but I cannot find the way to determine if the "Go" button in simpleSearch Panel is clicked.
THanks
-Bill

Hi Sumit,
I had tried over riding the initquery and execute query to meet the same requirement but the where clause i was setting wasn being set since the execute query somehow was making it null.
When i did hard code the whereclause params in the the executequery(),it worked fine but then i couldn have passed any variables.
Then finally i went around the oaf guide and found something like ,
dic[]=getcriteriaitems.... and it solved the purpose for me.

Similar Messages

How do I set a NULL value for the parameter field

Hi
I've another question. I'm going to set single values for parameter fields.
// e.g. set today for StartDate parameter field
fc.setCurrentValue("", "StartDate", new Date());
It should be possible to set a NULL value for date parameter fields.
fc.setCurrentValue("", "StartDate", (Date)null);
But this do not work. How do I set a NULL value correctly?
Thank you in advance.
Best regards,
Thomas

First question - is it a stored procedure parameter?
You can't set a regular parameter field value to a null value.
There was an issue with old version of the JRC, where it was allowing null to go through, but had unexpected behavior at times.
Sincerely,
Ted Ueda

How to dynamically set max-rss size for a local zone?

Running solaris 10 05/08.
Following situation: Three local zones in a Veritas cluster. The zones
can fail over but normally not all three are on the same physical box.
I want to be able to restrict physical memory usage for the zones in
situations where certain combinations of them end up on the same
physical box. So, I need to be able to dynamically change memory
resources. I know how to do this with, for example locked memory:
prctl -n zone.max-locked-memory -r -v <mem> `pgrep -z <zone name>
init`
but i need to do this for physical memory and I can't see that there
is a zone resource for this? I thought this was added in 05/08?

Hi
You can do this by using rcapd from the global zone
- start rcapd from the global zone:
svcadm enable svc:/system/rcap:default
- set a physical memory caping value for each zone
rcapadm -z your_zone -m max_rss_value
- check the memory use for all the zone capped
rcapstat -gz
You can set the rss capping value in the zone configuration:
# zonecfg -z your_zone
zonecfg:busi-app-prod> add capped-memory
zonecfg:busi-app-prod:capped-memory> set physical=900m
zonecfg:busi-app-prod:capped-memory> end
zonecfg:busi-app-prod> verify
zonecfg:busi-app-prod> commit
zonecfg:busi-app-prod> exit
This will be take in account at the next reboot of this zone.
Have a also a look to rcapadm to tune rcapd
Bye
Fred

How can I set a specific value for a field, according to the option selected in a previous drop-down menu?

Eg.: I have a drop down menu with the following options: "1,2,3,4,5". What I want to do is the followin: If the option selected is "1" the field "Color" must be filled with "Green", if "2" the field color must be filled with "Red", etc

You can use something like this as the custom calculation script of the color field:
var v = this.getField("Dropdown1").valueAsString;
if (v=="1") event.value = "Green";
else if (v=="2") event.value = "Red";
// etc.
else event.value = "";

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set a new value for formula field in crystal reports xi?

How to set a new value for formula field in crystal reports xi?//formula{@description} exemplo in VB6crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" orcrxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"How to in JRC? 

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

HOW TO SET A DEAFULT VALUE FOR A FIELD?

hi friends
i have doubt..how to set a default value for a field..say like in local printer field i always want lp01 to be displayed defaultly..when i click F1 in that field i get the parameter id ..i know there is something dealt with that parameter id..how can i set that default value ..in the case of the default printer value i made in own data settings as lp01 but how to do it normally for other field which has parameter id ??????
thanks and regards
prince

Hi Prince,
u can set the default value in abap as given below
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
PARAMETERS : S_BUKRS TYPE BSID-BUKRS OBLIGATORY DEFAULT '1000'.
PARAMETERS : S_BELNR TYPE BELNR_D OBLIGATORY DEFAULT '1600000070'.
PARAMETERS : S_GJAHR TYPE GJAHR OBLIGATORY DEFAULT '2008'.
PARAMETERS : ASON TYPE BUDAT OBLIGATORY DEFAULT SY-DATUM.
PARAMETERS : S_KUNNR TYPE KUNNR MODIF ID GP1.
PARAMETERS : S_LIFNR TYPE LIFNR MODIF ID GP2.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN : END OF BLOCK B1.
or
u can give the default value in INITIALIZATION also.
vlue = '1000'.

How to set the Default values for Info Objects in Data Selection of InfoPac

Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CV

Hi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha

How to set the default values for print options

Hi all,
We can set the default value for print options, just like Logical destination、numbers of messages、print immediately and so on, so where we should to maintain these default?

Hi Sandy,
This can be done by an abaper by making changes in the driver program. The Driver program feeds all the data which u have mentioned for printing.
if the driver program is standard. copy to an z type and make modification on printer settings on the driver program code.
this will surely solve the issue.
Regards
Gunaseelan

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How do I set ical default values in lion?

I have just upgraded to Lion and so far, so good. In the new iCal, how do I set the default values? In the old version, when you clicked on the calendar, the default value was a 1 hour meeting around the current time of day. The new version defaults to an all-day meeting. I like the old way better, or best would be to have it as a preference.
Is there a way to set this that I'm not seeing?

Mike,
It sounds to me like you are using the "Month" view for that entry.
Default event creation in Month view results in an all day event.
Lion iCal Help (Add events to a calendar) says: "Add a new event in Month view by double-clicking within the day you want the event to appear. Enter a name and time duration for the event in the event’s title field, and then press Return."
Try entering "Meeting at 9am"...that will create a one hour event named Meeting.

Setting default field values for multi-line text fields in lists?

For the multiple lines of text field in a list, I'm using SharePoint Designer 2013 to set a default
value for the field, but I need that default value to include rich text formatting (the default value includes a formatted table). Is this possible without having to delve into JavaScript? And if so, how?

Yes, we can :)
You can do it with powershell
$web = get-spweb <yourweb>
$list = $web.lists["<yourList>"]
$field = $list.fields["<yourField>"]
$field.DefaultValue = "place your html code here"
$field.update()
hope that helps

How do you set the font color for a specific entire row inside a JTable?

How do you set the font color for a specific entire row inside a JTable?
I want to change the font color for only a couple of rows inside a JTable.
I've seen some ways to possibly do this with an individual cell.
Clarification on changing the font color in an individual cell would be helpful too if
there is no easy way to do this for a row.

hai,
Try out with this piece of code.Create your table and assign the renderer to each column in the table.
CellColorRenderer m_CellColorRenderer = new CellColorRenderer();
for(int i=0;i<your_JTable.getColumnCount();i++)
your_JTable.getColumnModel().getColumn(i).setCellRenderer(m_CellColorRenderer);
class CellColorRenderer extends JLabel implements TableCellRenderer
CellColorRenderer()
setOpaque(true);
setHorizontalAlignment(LEFT);
setVerticalAlignment(CENTER);
setBackground(Color.white);
setForeground(Color.black);
protected void setValue(Object value)
 setText((value == null) ? "" : value.toString());
public Component getTableCellRendererComponent(JTable table,Object value,boolean isSelected, boolean hasFocus, int row,int column)
 if(isSelected == true)
 setForeground(Color.red);
 else
 setForeground(Color.black);
 setValue(value);
 return this;
regards,
bala

How to dynamically set column name in Answers

Hi.
How to dynamically set column name in Answers, for example I want to put presentation variable in column header. Is this possible?
Regards,
Goran Ocko
http://108obiee.blogspot.com/

May be a rude way .. but it works.
Add narrative view and use Java script to change the column headings based on the variables.
<script language="javascript" type="text/javascript">
var a = document.getElementById('idResultsTableParent');
var rows= a.getElementsByTagName('tr');
rows[1].cells[1].innerText ="@{Presentation Variable}";
</script>
Editing the same post to remove irrelevant information.
- Girish

How to dynamically set a bounded value for a VO at runtime

Similar Messages

Maybe you are looking for