How to edit Integer numbers in a JList?

I need to edit Integer numbers in a JList when double clicked.
Anyone has any example how to do that?
It will be always Integer numbers (they are used to calculate future dates based on today date).
Appreciate any help

JList by default is not capable of handling editting of content like JTree and JTable. But with some customization, that is possible, see this site for more info: http://www.jroller.com/santhosh/date/20050607
ICE

Similar Messages

How to edit phone numbers in contacts for text messages

My number is blocked so others can't see my phone number. In order to unblock my number for friends and relatives, I added *82 in front of those phone numbers in my contact list to override the block and show my number. So here's the problem -- when I want to send a new text message to someone in my contact list (whose number is preceded by *82), I need to edit the number to remove those extra characters in order to be able to send a text message to them. Is there any way I can edit the phone number from within the messaging function?
Thanks.

I am havng a similar problem that I can't figure out. I have mutiple numbers for each contact. i.e. mobile with *82, mobile without *82 for texting, home number, work number etc... I would like for them to come up in a spicific order. The two mobile numbers first and then home and work. That way I can get to the mobile numbers first as those are most used. Also so to save time knowing that all contacts are in the same order. So far it has been random for each contact. Some come up mobile first either with or without *82, others come up home first and some come up work first. I have tried deleting the entire contact and starting over thinking that the first number you enter becomes the primary. That didn't work. Any suggestions?
Thanks in advance

How to display page numbers in report

hi all,
i would like to know how to display page numbers in this format " 1 of 5" in the report.
Any help would be much appreciated.
thanks
seema

Hi,
Check this too...
Page No. in ALV output
If you query is solved, kindly close the thread.
Regards,
Anjali
Message was edited by: Anjali Devi Vishwanathan

HOW DO I GET NUMBERS TO DO WHAT I WANT?

HELP PLEASE:
I FIND NUMBERS CONFUSING. THE OLD WORKS SPREADSHEETS WERE SO MUCH EASIER/SIMPLER.
I CAN’T SEEM TO GET THE FORMULAS & FUNCTIONS ENTERED CORRECTLY.
I DON’T KNOW WHAT THEY MEAN “PRESERVE ROW” OR “PRESERVE COLUMN”.. SO DON’T KNOW IF I NEED TO CHECK
ONE OF THEM OR NOT…AMONG OTHER THINGS.
I’M TRYING TO MAKE A SPREADSHEET FOR TWO INVESTMENT ACCTS.
ONE HAS A LARGE NUMBER OF STOCKS IN IT.
THE SECOND HAS ONLY A FEW STOCKS BUT THEY ARE THE SAME STOCKS WHICH ARE IN THE FIRST ACCT. AS WELL.
THAT MEANS MOST OF THE CELLS IN COLUMNS F & G (BELOW) WILL BE EMPTY.
FOR THE PURPOSE OF MY EXAMPLE:
“A ACCT“ WILL SHOW ONLY 4 STOCKS & “B ACCT” WILL HAVE ONLY 2 STOCKS. I THINK THAT’S ENOUGH FOR YOU
TO SEE WHAT I’M ATTEMPTING TO DO.
LETS SAY THE COLUMN HEADINGS ARE:
A                 B                          C                D                  E                             F                 G                           H
SYM       DESCRIPTION       A ACCT#SH     CLOSE    A ACCT TTL VALUE     B ACCT#SH   B ACCT TTL VALUE   ACCTS A&B TTL
I WANT TO MULTIPLY ACROSS EACH ROW      THE # SH    TIMES    THE CLOSE — TWICE
COL C TIMES D SHOULD EQUAL E
COL F TIMES D SHOULD EQUAL G
THEN I’D LIKE TO ADD E + G AND HAVE THEIR TOTALS ENTERED IN COL H IN EACH ROW.
ONCE ALL THAT’S DONE, I’D LIKE COL. E TOTALED, COLUMN G TOTALED AND COL H TOTALED.
FOR EXAMPLE:
     A             B                         C                 D                  E                          F                        G                         H
1. SYM    DESCRIPTION       A ACCT#SH     CLOSE    A ACCT TTL VALUE     B ACCT#SH   B ACCT TTL VALUE    ACCTS A&B TTL
2. XYZ     XYZ STOCK               200             25.00           $5,000.00              150                  $3,750.00           $8,750.00
3. STU     STU STOCK               100             10.00           $1,000.00
4. PQR     PQR STOCK               500             20.00         $10,000.00             100                   $2,000.00         $12,000.00
5. MNO    MNO STOCK              100             12.75           $1,275.00
                                                                                =SUM (E2:E5)                               =SUM (G2:G5)      =SUM (H2:H5)
I THINK I KNOW HOW TO WRITE THE FORMULAS TO TOTAL THE COLUMNS. I CHOOSE “EDIT FORMULA” UNDER “FUNCTION” AT
THE TOP OF THE SPREADSHEET AND WRITE AS I’VE SHOWN ABOVE IN AN EMPTY CELL AT THE BOTTOM OF EACH COLUMN.
IS THIS CORRECT?
WHAT I HAVEN’T FIGURED OUT IS HOW TO GET THE MULTIPLICATION DONE ACROSS THE ROWS OR THE ADDITION FOR COL. H
I THINK I KNOW WHAT THE FORMULAS SHOULD BE BUT DON’T KNOW HOW TO GET THEM ENTERED OR WHERE….
I’M DOING SOMETHING WRONG BECAUSE I GET ONLY ONE NUMBER AT THE BOTTOM OF COLUMN E INSTEAD OF MULTIPLYING
ACROSS, THEN TOTALING THE COLUMNS
I THINK THOSE FORMULAS SHOULD BE:
COL E SHOULD BE:   =PRODUCT(C,D)         AND   COLUMN G SHOULD BE: =PRODUCT(D,F )        AND COL H SHOULD BE: =SUM(E,G)
CORRECT? IF NOT PLEASE ADVISE WHAT THEY SHOULD BE.
IF MY FORMULAS ARE CORRECT, HOW DO I GET NUMBERS TO DO IT? PLEASE PRETEND YOU’RE SPEAKING TO A 5 YR OLD…..
I’D SAY 1O YR OLD BUT THEY MAY BE MORE FAMILIAR WITH THE VOCABULARY AND HOW TO DO THIS THAN I AM.
THANK YOU.

It's incredibly hard to read a post when it's in ALL CAPS.
But the answer to your question is copy and paste. When you have a cell that contains a formula, and you copy and paste it into another cell, firstly, the formula gets pasted, not the value, and second, the formula uses relative cell values. What that means is, if your formula in E2 is C2 * D2, and you copy and paste that cell value into E3, it will by default become C3 * D3. (You CAN change a formula to use absolute cell values if it suits your spreadsheet - when you edit the formula, the drop down for each cell number includes a value like $C2 which will not change when you paste it into a lower row.)
by the way, it's usually faster just to use the equals sign when you enter a formula in a cell. eg, click into E2, press equals to start the formula, click into C2 to make that the first cell in the formula, type "*", then click into D2 and click the green tick to confirm the formula.
Matt

How to insert page numbers in a PDF document?

How to insert page numbers in a PDF document using Adobe Acrobat X Pro 10.1.2?
Thanks.

OK, I found it myself:
1. Tools - Pages - Edit Page Design - Header & Footer - Add Header & Footer.
2. Select the font and size, etc, place the cursor on the appropriate site to insert the page number, click the "Insert Page Number" button, and click OK.
That is!

How To edit Display ID/Monitor ID or erase Display ID/Monitor ID Windows 7

Hi !
Started a tread in the other "answers microsoft forum" bur got redirected here hence they thought that this was a developer-question...
My original Thread:
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/how-to-edit-display-idmonitor-id-or-erase-display/62eeace8-358c-4d65-8609-a3df7c3ac216?rtAction=1425277245844
question:
Have a problem that appears sometimes.
Setting up workstations at work with multiple Display-Monitors, its part of my job...
The Actual ID that the monitors get from Windows is usually not a problem, most programs can adapt to the windows settings and everything is fine.
BUT some of the systems we run sends commands and stuff to based on the actual number of the display, the number that appears on the screen when clicking the "identify button" in the desktop/display-settings from control-panel.
Lets call it the HardWare-ID of the Display
the computer, or windows remember display´s EDID and stores the monitors that has been connected in a list ?
If I installed the monitors/displays in correct order everything is good and works like we want it to.
So it happens that a display brakes or switch place for some reason, or maybe a driver-upgrade resets the display-list and windows now initiates the monitors in the wrong order.
the monitor that 1 want to have HW-ID 1 now has HW-ID 2, and everything is wrong, messages and commands now end up on the wrong display.
We have 3 options.
1 - Fix the display HW-ID
2 - Re-Configure the system and all that that includes, and hope that it wont change back at the next display-switch or driver-upgrade.
3 - re-install windows and hope that the displays get the correct ID and the continue with customer applications and so on.
I have found out that this is being stored somewhere in REG-Edit, but cant find the correct place
Having talked to HP, they don't support this kind of things... it must be a windows-problem, try with a clean install..... c-mon I switched a display !!
Tried clean driver-installs from AMD and Nvidia for the graphics cards, worked one time, until I rebooted the machine, the back to square one...
Then they ponited at Microsoft.
Having talked to Microsoft Support they dont support this kind of things....
I dont have the skills, but I cant se a problem with a scrips that deletes the reg-edit EDID list after a reboot ?
then it wouldnt be so complicated, simply:
unplug all but the display that you wan to be number 1
run script
reboot
plug in display 2 and so on ?
clearification:
Hi !
The question remains.
Not sure you guys understand my problem, doesent seem so...
I have the need to sweep the computers display-memory
The Application we are using is sending the commands to to logical screen number, not primary or secondary screen.
So It is Vital that I can decide or edit the logical numbers of the displays/screens
It doesent help me at all to switch sides in controlpanel och swtich witch is primary screen for desktop.
the application still sends the commands to teh logical numbers, and we dont want to reconfigure that if we changed a display that was faulty.
So:
I Need to disconnect displays så that I only have one connected
sweep the display-memory that is on the computer so that the disconnect monitor becomes number 2 when I reconnect it, if I dont get this memory swiped windows remembers the display and gives it the old number again.
can anyone help me `?
NOT connected to any Domain.
I realy cant understand how hard it can be to swipe the hardware ID of the displays and start over without having to to a clead install of windows !!

Hi Bobbyco57,
i've deleted my iCloud's mail ID in my iPhone 4 successfully so i've mentioned steps to delete iCould mail ID as below:
1. Select Settings icon.
2. Select iColud icon.
3. Click on Delete Account.
4. Enter new Apple ID and Password.
5. Click on Agree.
Thanks and Regards,
Suresh Balakrishnan

Problem with entering integer numbers from keyboard

I have written this simple code:
import java.io.*;
public class Simple{
     public static void main(String[] args)throws Exception{
          System.out.println("Enter two integer numbers: ");
          BufferedReader enter=new BufferedReader(new InputStreamReader(System.in));
               int first=Integer.parseInt(enter.readLine());
               int second=Integer.parseInt(enter.readLine());
          System.out.println("Result is: "+(first+second));
and it works fine if I type first number, press Enter, then type
second number and press Enter.
But if I type in one line: 2 3 (with space between) I get run-time error:
Exception in thread "main"...bla...bla at java.lang.Integer.parseInt(Integer.java)...
I know that error is coming from Integer.parseInt(string) in my code, but I
don't know how can I avoid it.
In C that is rather simple scanf("%d %d",&first,&second), but in Java it's much more
complicated.
Do you have any suggestions how to solve this problem?

store the user input in a string
use a StringTokenizer st
then
while(st.hasNext())
int first=Integer.parseInt(st.nextToken());
but you should really catch a NumberFormatException
walker

How to edit book/author on this template?

I've been working off of the BookPatch template for InDesign (6x9, download here) and as I'm kind of new with ID I'm having a problem. I can add pages and add the text to them fine, but there's these sections at the top of each page (the red arrows) that I'm not sure how to edit. Adding new pages numbers the correctly at the bottom (the blue arrow), so I'm guessing there's a way to edit it once somewhere and have it reflect over each page? I tried the text tool and direct selection tool but I'm stumped. Any help would be appreciated.

Thanks a bunch, all set.

How to update Location numbers of customers using BAPI_CUSTOMERCRM_CHANGE

Hi everyone,
I would like to ask how to update location numbers 1 and 2 and check digit using this bapi,
BAPI_CUSTOMERCRM_CHANGE and what are the significance of the following parameters.
CALL FUNCTION 'BAPI_CUSTOMERCRM_CHANGE'
EXPORTING
    I_UPLOAD_ID             =
    I_DESTIN                =
    I_SFA_REL               =
    I_KEYWORD_IN            =
    I_CUSTOMER              =
    I_ADDRESS               =
    I_ADRCHANGE             =
    I_SALESORG              =
    I_TAXDATA               =
I_BANKCHANGE            =
    I_TRANS_MODE            =
I_ORIGIN                =
I_CUSTCHANGE            =
I_SALESCHANGE           =
IMPORTING
E_STATUS                =
TABLES
    TI_STDTEL               =
    TI_STDFAX               =
    TI_STDTTX               =
    TI_STDTLX               =
    TI_STDMAIL              =
TI_BANK                 =
TI_LOADING_POINTS       =
    TI_ROLES                =
TI_BANKCHANGE           =
TI_ROLECHANGE           =
    TI_EXTENSION            =
    TI_SFA_KEYS             =
Thanks for helping!
Regards
Jay Ags
Moderator Message: Welcome to SCN. But please search for SAP Documentation and/or sample codes.
Edited by: kishan P on Apr 6, 2011 12:09 PM

I was facing the exact same issue and just figured out the solution: the issuing storage location is only accepted if the supplying plant is passed at the same time (in the header structure). That solved the issue for me!

How to add integer value of two buttons?

how to add integer value of two buttons (any button) in VI and display it in output text box? i have attached example program, but i know its wrong.. please help
Solved!
Go to Solution.
Attachments:
add.vi ‏8 KB

thanks for reply. i am trying to assign an integer value to a button and the button should send the assigned integer value to TCP/IP write, only when the button is pressed. i am able to send data using string control (as shown in the attachment) but i want to replace it with several buttons. for example, if i enter 2 in string control, this data will be sent to a robot (robot has wifi card) through tcp/ip protocol, it moves front. 3 will make it to move back, 8 is left, 6 is right. this numeric data is already burnt into blackfin processor of the robot. so just by entering numbers in labview can make my robot move in specified direction. can you please help me to create a button with value and convert it into string and send it to tcp/ip write. this should happen only when the button is pressed. because, if i enter numbers in string control, it dosent looks good..... if i have buttons... i think my VI will look good and hitech.
Attachments:
robo.vi ‏9 KB

How to append the data list bod (JList)

how to append the data list box (JList)
Message was edited by:
raju_2reddy

For this you will need a nested internal table. such that each column of the internal table should be declared as another internal table.
Try something like this :
" Lets say that the type of table that will be returned by the function BOM is ty_ret_tab, then declare as follows
types begin of ty_tab,
c1 type table of ty_ret_tab,
c2 type table of ty_ret_tab,
end of ty_tab.
data gt_tab type standard table of ty_tab,
gwa_tab like ty_tab.
Now the question is how many columns should you declare ? Because you said that in a loop you intend to call a function which will return a internal table and this internal table you need to store in a column of another internal table. And if this is not fixed, you would need to do some dynamic programming to achieve this.
But if we assume that there are fixed number of columns and fixed number of loops, then within the loop, you wiill have to simply move the data from the returned table to each of the columns. Then append the work area outside the loop.
data field(30) type c.
data c_tabix(10) type c.
field-symbols <fs> type ret_tab. " this should be
Loop at itab.
call function BOM...
exporting...
importing.....
tables ret_itab.
c_tabix = sy-tabix.
concatenate 'C' c_tabix into field.
condense field.
assign component (field) of structure gwa_tab to <fs>.
<fs> = ret_tab. " Pass data to each column
endloop.
append gwa_tab to gt_tab. " Now a single record with all columns containing an internal table is built.
Hope this pseudo code helps.
BR,
Advait

How to edit phone number in contact?

I'm using Skype 5.1.0.968 on latest Mac OS and cannot figure how to edit/change/delete a phone number that I have created in the contacts list. I've tried everything I can think of!!!

Snowcreative gives a perfect description of the problem that Mac users of Skype version 5.3.x are facing. Here's some additional detail. If you type in a number to place a Skype-Out call and then wish to add that number to your Skype Addresses, you right click the number that appears in the left column and select "Show Profile". The profile appears with a button in the upper right corner that says "Add Contact". If you click that button Skype automatically creates a contact and the default action is: the contact is created and given the phone number as its name (in the top section of the profile, weird, but can be edited by a click), and in the second section of the profile the same PHONE number appears and is automatically labeled "Skype". This number CANNOT BE EDITED. THIS IS THE PROBLEM!! If I right click the word "Skype" nothing happens. If I right click the phone number the option that appears is "Copy" which is not helpful for editing. If I right click the chat icon, nothing happens. If I click on "Add Number" which appears in blue under the telephone number that has been labeled "Skype" then I can add another number. This is no help though because I already have added the number I want!! P.S. I checked my Address Book and none of the numbers that I add in Skype appear in my address book - so that is NOT the way around this. Skype grabs numbers from the address book, but does not add anything in the opposite direction. That would be a real mess!

How to print page numbers in adobe form

Hi,
Can anybody tell me how to print page numbers in adobe form.
Thanks in advance
Chaitanya

Hi,
Yes the field page n of m is used normally for printing page numbers. But it won't display the current page of total pages by itself. You have to set the run time property to n (current page ) and m (Total number of pages). Carefully select the # (current page ) and ## (Total number of pages). Hope this works for you.
My requirement is to have the user control on current page. For Example:
Example for a Invoice with 5 PO items (stands on 2 pages) :
1st page is the letter : no page number
2nd page is the 1st page of the 1st copy of the invoice : we should read u201C1 / 2u201D
3rd page is the 2nd page of the 1st copy of the invoice : we should read u201C2 / 2u201D
4th page is the 1st page of the 2nd copy of the invoice : we should read u201C1 / 2u201D
5th page is the 2nd page of the 2nd copy of the invoice : we should read u201C2 / 2u201D
Presently i cam getting the current page number for page 4th as 3 / 2 and for 5th page 4 / 2. I could able to control the total number of pages from print program. But when i am printing the second copy (4th and 5th pages), I couldn't able to control the current page number. I need to initialize the Current page count (4th page ) as 1.
I have used the follwing java scripting:
this.rawValue = wv_pages - xfa.layout.page(this)
where wv_pages is total no of pages calculated from print program.
Please help me in this regard with some formcal or java scripting conditions.
Thank You,
Regards,
Naresh.

How to edit a PDF in Photoshop CS4

Hi there,
I'm having some real trouble trying to figure out how to edit a PDF in photoshop cs4. So i need to edit/change text, move things around, that type of thing.
I work in Windows.
Could someone give me a bit a low down on how this is done?
Much appreciated,
Victoria

You can open them but you will totally rasterize everything.
PDFs are not intended to be edited. They are a final format but as
mentioned you can use Acrobat for some minor text edits or use it to
extract the images to Photoshop for further editing.
Bob

How to edit JVC/Panasonic/Canon .mod video in Windows Movie Maker then upload to YouTube for sharing

Quick View:
Part 1: How to import .mod video to Windows Movie Maker
Part 2: How to edit the video with Windows Movie Maker
Part 3: How to upload your video to YouTube
Know More:
1. Which Camcorders record video in .MOD type?
2. What file types are supported by Windows Movie Maker?
3. What file types are supported by YouTube?
Part 1: How to import .mod video to Windows Movie Maker
Step 1: Load files
First copy the MOD file from your video camera to your hard drive, then download, install and run MOD Converter, click the "Add Files" button to browse your computer hard disc and load the MOD/TOD video files you want to convert to the program.
Step 2: Output Setting
In the bottom of the main interface, select an output format supported by Windows Movie Maker for each video file and specify a directory on your computer to save the output files.
Step 3: Start convert
Click "Start" button on right bottom of the main interface, you are allowed to start conversion.
Step 4: Import converted video to Windows Movie Maker
Click on "File". Then click on "Import". A window will appear. In the window, navigate to the video clip you converted just now. Then double click on the file. You'll see the icon for the file in your Windows Movie Maker "Collections".
Part 2: How to edit the video with Windows Movie Maker
Step 1: Add transitions and special effects
In the Movie Tasks pane, under Edit Movie, click View video transitions.
Preview transitions by double-clicking them and watching the Preview Monitor. Once you've found a transition you like, drag it from the Video Transitions pane, under Edit Movie pane to the box between two of your clips. This inserts the transition between the two clips.
Step 2: Add titles and credits
If you want to add a title before, after, or on top of a clip, click the clip on the storyboard or timeline.
In the Movie Tasks pane, under Edit Movie, click Make titles or credits.
Step 3: Add Music
In the Movie Tasks pane in Movie Maker, under Capture Video, click Import audio or music.
In the Import File dialog box, click the name of the song you want to use in the background. Then click Import. This adds your song to your collection but does not add it to your video. Drag the song from the collection to the video clip where you want the music to start playing.
Step 4: Add narration
If you have a desktop computer, connect a microphone. Microphones are available from most electronics stores. If you have a portable computer, you can use the built-in microphone. However, you will get a better-quality recording if you connect an external microphone. In Movie Maker, click the Tools menu, and then click Narrate Timeline. On the timeline, click the clip you want to narrate. You can narrate clips one at a time, or you can narrate the entire movie all at once. If you narrate individual clips, you can rearrange them later and keep your narration synchronized. If the narration is too loud or too soft in comparison to the movie, right-click the narration on your timeline, and then click Volume.
Step 5: To save your movie to your computer
In the Movie Tasks pane, under Finish Movie, click Save to my computer.
The Save Movie Wizard appears. On the Save Movie File page, type a name for your movie. You can also choose a folder to save it in by clicking the Browse button, but My Videos (the default) is usually the best place to save your movie. Then click Next. On the Movie Setting page, click Next to accept the default setting of Best quality for playback on my computer.
Movie Maker saves your movie, which might take several minutes. On the Completing the Save Movie Wizard page, click Finish. If Play movie when I click Finish was selected (it is selected by default), the movie will automatically play in Windows Media Player. Now you can watch your videos anytime by opening your My Videos folder and double-clicking your movie.
Part 3: How to upload my video to YouTube
A video file should meet the following requirements so that it can be uploaded to YouTube site.
1. In an acceptable format: WMV, MPEG4, MOV, AVI and MPEG.
2. Video length is shorter 10 minutes.
3. File size is smaller than 1GB.
Step 1: Sign up a YouTube account or Gmail account, then click the Upload button on any YouTube web page. See the figure below:
Step 2: Type in the information of your video file, including Title, Description, Category and tags. To increase the chances that your video can be easily found, you should put as much information as possible.
Step 3: Set this video to be public or private.
Step 4: Click the "Upload a video" button. When you see the next window, click the "Browse" button to select the video file you want to upload. Then click the "Upload Video" button to upload it. After the upload is finished, you will see the completion page. See the figure below:
Step 5: Click "My Videos" and you will see the video.
Know More:
1. Which Camcorders record video in .MOD type?
MOD is the video file type used on many digital camcorders, such as the JVC Everio, the Canon FS100 and the Panasonic D-Snap SD-card camcorders. Accompanying the MOD video file, there exists MOI file that stands for the index file for MOD.
2. What file types are supported by Windows Movie Maker?
You can import files with the following file name extensions into Windows Movie Maker to use in your project:
Video files: .avi, .wmv, .mpeg, .mpg., .asf, m1v, .mp2, .mp2v, .mpe, , .mpv2, and .wm.
Audio files: .mp3, .wav, wma, .mp2, .aiff, .aif, .aifc,.asf, .au,.mpa, and .snd.
Picture files:.jpeg, .jpg, .jpe, .png, .bmp, .dib, .emf, .gif, .jfif,.tif, .tiff, and .wmf
3. What file types are supported by YouTube?
YouTube accepts a wide range of video file formats.The video files below are all accepted by YouTube. Some video formats work best and are most compatible with certain computers, software or devices. Windows Media Video (.WMV)
.3GP (cell phones)
.AVI (windows)
.MOV (mac)
.MP4 (ipod/psp)
.MPEG
.FLV (adobe flash)
.SWF (shockwave flash)v
.MKV (h.264) If you do not think your current video file format is recognized by YouTube, you may get the best uploading results from converting your file to MPEG4 video with MP3 audio.

I prefer this
iPad Manager software, with the assistance of iPad Manager, you can make iPhone ringtone, connect your PC to iPad to backup iPad files to Computer directly, import computer file or folder to iPad.
Furthermore, it's easy to convert DVD/video to iPad.
This versatile iPad Manager can help you transfer videos, songs, photos from computer to iPad and from iPad to PC in fastest speed. Have a try with this tool and manage your iPad, iPod, iPhone in a much easier way.
* Convert DVD/video to iPad
* Backup iPad files to PC
* Import computer file or folder to iPad
iPod Manager
iPod Video Converter
DVD to iPhone Converter
iPod Mate

How to edit Integer numbers in a JList?

Similar Messages

Maybe you are looking for