How to Edit Source File?

I understand, in the source file, my home page
<title> says "home" nothing else. I've been told to
change it to "Richard Lange - Artist" or something
similar. Same idea for all my other pages since they
are vital part of the search engines search
patternings.
It's debatable point. Your site is #1 listed in Google as it is.
I also understand it can not be done in iWeb. And,
that were I to republish from iWeb, the changes would
need to be redone. (Unless - I imagine - I publish to
my desktop folder and then using Lunarpages file
manager, upload only the page(s) that have been
modified.)
You can change pages title in iWeb by changing the page name in iWeb.
But some hosts' server won't accept special characters, such as space in file name during uploading process.
So you have to stick with some plain file name and edit <title> tags
Will doing so affect the design or visable content of
my pages?
No.
Might I be able to edit the code with the c/panel
file manager at Lunarpages, my server?
You have to check with your host.
If not, how do I find and edit and upload this data?
if ➊ you are running 10.4.x ➋ your system language is English ➌ you published to a folder, then you may want to try my 'Set Pages Title' script. it can be found here:
http://www.geocities.com/[email protected]/iWeb_utils/
Be sure to read the iWebScripts.rtf file, I tried to explain on how to configure the script to your iWeb environment.

Similar Messages

How to edit a file

Ok I probably realise that I've missed something in the literature on installing arch somewhere along the way, but I've spent the last 3 hours trying to find how get past this stage to no avail.
I've managed to realise I have a dhcp connection.
For DHCP IP
For this option, you need the dhcpcd package (already available on most installations). To make use of it, edit /etc/rc.conf like this:
eth0="dhcp"
INTERFACES=(eth0)
ROUTES=(!gateway)
but when i type "edit /etc/rc.conf" I get a colon
I presume I'm in some kind of editor, but I can't see what I'm supposed to change and what commands to use inside the editor.
Any help gratefully received

bzzzz Arch is for competent Linux users - not knowing how to edit a file suggests that you do not fall into this category. If you wish to persevere and use Arch as a learning tool, then you need to be aware that you will be required to do most of the work yourself.
See the wiki: https://wiki.archlinux.org/index.php/FA … se_Arch.3F

How to Archive Source Files with error in XI ?

Hi,
How to archive source files where a permanent error occurred duing processing? and how to set it?
Thank you in advance.
Yinglak

Hi,
What exactly u want to do.........If u want to Archive ur sender file then give Archive directory path and if u process the file with error data or success data it will store in Archive directory.
Archive Directory is used to store the sender files what ever data ur sending ........not for only error records.
Regards,
Phani
Reward points if Helpfull

How to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 using ftp

how to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 device using ftp through Ethernet

Hello
For using FTP function in LabVIEW, I recommend you to check this document: FTP Basics
Also, take a look at FTP Browser.vi, which is available at the Example Finder.
To edit a XML file, try to use VIs in XML palette. Maybe Write to XML.vi helps you.
Post your current VI if possible.
Regards
Mondoni

Hi, somebody knows how to edit a file that I created in corel draw 11 and I need to edit like PDF!!!! is so simple and nobody knows howwwwwwwwwwww!!!!

Hi, somebody knows how to edit a file that I created in corel draw 11 and I need to edit like PDF!!!! is so simple and nobody knows howwwwwwwwwwww!!!!

See your other thread.

How to edit *.folio files in Folio builder

Hi,
I have list of .folio files and I want to edit those files and copy the text from the .folio fiile.
Can any tell me how to edit .folio files.
Is it possible to edit the .folio files in Folio panel. Or if any other application can able to open the .folio files, please guide me on this.
Thanks,
Krish

You could, but you won't get what you want.
The .folio file simply contains flattened images/pdfs of the page. So thus, you can't copy the text as though it's XML or part of some sort of word document. I suppose you might be able to try to copy and paste the text off of the PDF, if it's a PDF folio. But.. yick.
From folio builder, preview the folio on your machine using the desktop Content Ciewer. (Or Export it via Folio Producer after publishing it privately.)
On your mac, then navigate to \Users\{username}\Library\Application Support\com.adobe.dmp.contentviewer\Local Store\FolioCache\{Folio Name}\{Article Name}\StackResources.
This should get you to the PDF files for each article.

How to edit NTFS file permissions in Windows PE 3.0

Does anyone know how to edit NTFS file permissions from Windows PE 3.0?

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to edit pdf file

How do I edit a PDF document on my IMAC using OS X Mountain Lion 10.8.4?

vakilwala,
I agree with try67. Acrobat will sometimes add megabytes to the file size after several simple text edits. I don't know why this happens but it is annoying and unreasonable. Why give users a tool whose down side is that it enlarges the file size so much?
Edit the PDF only as a stopgap measure, for example, to correct the date on your title page or one typo if you are pressed for time. Always go back and correct the source file and then recreate the PDF file when you have the time.
Yours,
Michael F
~~~~~~~~

How to find source files for an exe?

I have an exe that has eben built by someone else. How do I know which files are being used as source files?

Depending on what version of LabVIEW you are using, you can find out the names of all source files. In versions 7.1 and earlier, you can rename the EXE to LLB and LabVIEW will recognize the EXE as an LLB, and you can browse the VIs in the EXE. You may not be able to open them, as most will have their front panels removed, but you will at least be able to see the list of all the files (but no paths to the original source). On newer versions of LabVIEW, it appears that this no longer works.
Also don't forget that if the person built the EXE with a small EXE and a supportting llb, there may be a data.llb (default name, the user could rename it) that will have almost all of the VIs in it (again, you may not be able to open them, but would be able to get a list).
Have you not been able to find a .bld file (for v7.1 and earlier) or a .lvproj (8.0 and later) file? This would be the definition of the EXE build and will give you a list of everything with paths.
Message Edited by Matthew Kelton on 10-16-2007 12:18 AM

** How to get Source File Name thru XSLT Mapping

Hi friends,
We require source file name after message processing (SXMB_MONI) in the output structure. We understad from Forums and blog 2664, this is possible thru UDF - DynamicConfiguration class. This UDF will work if we use message mapping. But, in our case we are using XSLT mapping. So, how do we call the same from Java Pacakage ? (Imported Archives). For writing java class separately, what are the changes to be made in the program?
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Kindly reply, friends.
Kind Regards,
Jeg P.

Hi,
This is the example in this similar manner u have to call the method in which u have to write the code for picking the source file name.
<name>
   <xsl:if test="function-available('javamap:concat')">
    <xsl:value-of select="javamap:concat($first, $last, $inputparam)"/>
   </xsl:if>
</name>
for reference check the Link,
http://help.sap.com/saphelp_nw04s/helpdata/en/73/f61eea1741453eb8f794e150067930/frameset.htm
Regards,
Phani

Lightroom won't ask how to edit a file when I select "edit in Photoshop CS6"

Yesterday Lightroom suddenly stopped asking how I want the file edited when I select "edit in Photoshop". I opens the file directly in Photoshop without asking do I want to "edit with Lightroom changes", "edit a copy", or "edit original".
I've tried finding a setting to turn this on or off and found nothing. I've tried shutting down. I've even tried removing and reloading both Photoshop and Lightroom. As far as I can tell it has defaulted to always opening with LR edits.
I'm using Lightroom 5.3 and Photoshop CS6 extended version 13.0. I ran updates on both after reloading yesterday. I'm using the Mac versions of the software.
Please help!
Message was edited by: Jon Beverly in Homer AK

Is it possible that you've switched to using Raw (or DNG) files? There is a different process when using a Raw file versus using a rendered file such as Jpeg, Tiff, PSD....and it's only the latter file-types which will prompt the "Edit a copy, Edit original, etc" question. If the ACR levels are compatible (which they will be if your ACR plug-in for PS CS6 is up-to-date) then there will be NO question when using "Edit In...." on a Raw/DNG file, the file is rendered automatically in the background by Photoshop's ACR plug-in, when you then "Save" in PS the now-rendered file (Tiff or PSD, depending on your external editing preference setting) will appear back in Lightroom.

How to Edit PSD Files In Flash Template

Hi Everyone,
I am new to flash and I am trying to create my first flash site using a template that I have downloaded. I can edit the first page fine, but when I click the "about us" or any other section, the standard template text, Which isn't even in english, appears. I believe that these are psd files, and I have tried to edit them, saved and replaced file on my computer, but still I get the same unchanged text on this site when I preview. Could someone please tell me how to edit and replace these files within the flash movie?

Instance names are the reference names that you give to the individual items on the stage. Only movieClip and button symbols can have instance names.
When you import a photoshop file to Flash you will get individual bitmap objects on the stage and in a folder in the movie's Library. You will need to select each item, one at a time, on the stage and convert each one to a symbol. When you make that conversion the name that you give to that new movieClip or button is the name that you will see in the Library.
When you select that new symbol on the stage, look at the Properties window. You will now see a space at the top where you can give that item an instance name. The instance name is what you will use in Actionscript to control that object on the stage.
When you look in the movie's Library, you will see the original bitmap and the symbol that you created that contains that bitmap.
Does that help?

How to edit PSD files on Photoshop Creative Cloud

Hi there,
I am new to Creative Cloud and just downloaded the Photoshop App to my desktop. However, I can't seem to find the options where I can edit my psd files. Can someone please help me? I would like to know how I can start editing PSD files on the Photoshop Creative Cloud App.
Thank you so much!

HI Resumeboston16,
Which version of Photoshop are you using? Photoshop CC?
You'll probably still want to save you PSD files locally to the computers hard drive. You can upload them to the Creative Cloud files page here https://creative.adobe.com/files through the browser.
Then you could download it on another computer to work on it there.
-Dave

Need help on How to edit RDF file to see fields

Hi all ,
Thank you all for being helping
could please someone explain where and how to edit the RDF file to view the code and fields, sometimes we need extra fields to add in the RTF templates.
And if I get XML file from EBS, on top of the page of xml file tags says <RAXINV>
how can i able to see this RAXINV short name in EBS on particular application to view fields and other info reg report,that way I can see columns and tablenames by using Help- ->record history, and Diagonise that particular report.
any help please
vasu

Hi Srinuk, I'm not sure what you mean?
An EBS report (RDF) "root" tag will always start with the "module" name in the property pallete of the report itself. Your XML tags and nestings are a direct result of your data model groupings combined with whatever your layout is defined as?
Looking at a record history within EBS only tells you what table the form is looking at and I can't see what this has to do with an EBS report definition unless I'm missing something in your question.
You need to open the RDF to getting the data model to understand the XML tags.
Rob.
http://www.scnet.com.au

How To Divide Source File Into Smaller Files Without Exporting?

Hello Everyone,
I'm a beginner with PPro CS4 and to video editing in general. I've done a lot of Googling and searching of these forums to get an answer to this question, but I haven't found a clear answer. Here's my problem:
I have many hours of HDV footage shot over the past few years with a Canon HV30. This footage is on dozens of DV tape cassettes. I want to capture most of it to disk.
When I capture a tape to disk, I get a single large mpeg4 file. (PPro captures all HDV footage to mpeg4.) "Scene select" doesn't work with the HV30, so my only other way to make smaller capture files would be to set In/Out points with batch capture. But this would mean hours of fast-forwarding and reversing with the VCR-like controls on the camera to review all the tapes and set the points. I thought it might be FASTER to simply capture an entire tape in one operation, THEN review the captured tape within PPro (it's much faster using the scrubber), and dividing that file into smaller files within PPro, thereby avoiding all the mechanical fast-forwarding and rewinding on the camera itself.
But the only way I can find to do this seems to involve EXPORTING clips. Am I wrong to think that exporting a clip to a new file involves a degradation of the original mpeg4 source file? Or will there be no loss to the quality if I simply export to mpeg4 format?
It seems there should be an easy way to simply divide the original capture into smaller source files for later editing, without putting the footage through another generation of processing (exporting), which might entail some loss of quality. Or am I wrong about this?
(CS4 Master Suite, i7 3630k, 16GB RAM, C: 256GB SSD, D: 1T Setpoint F3, E: 1T Setpoint F3)

HDV footage is mpeg2 (whats in a number ). CS4 does not do scene detect you need to use HDV split for that.
http://strony.aster.pl/paviko/hdvsplit.htm.
You can run your already captured files through hdv split and it will chop the file into clips and off you go.

How to Edit Source File?

Similar Messages

Maybe you are looking for