How to edit UserInterface that only Limit-tests are shown

Hello,
i just tested the Simple-UserInterface in TS4.0 for Labview.
While running a sequence all steps are shown in a list.
What i want to do is:
How can i modify the USerInterface that not all steps are shown but only the tests that i specify. For example all steps with a special property.
Is this possible?
Thanks for your help

Hello,
I have a couple of ideas for you. First of all, are you viewing your
report from the user interface as well? You may want to consider modifying what
step results are added to the report, so that the operator will only see the
relevant results. You can do this by viewing the Properties of a step,
navigating to the "Run Options" category, and disabling the "Record Result"
checkbox.
You can also use UI messages to pass data back to your user interface from
your TestStand sequence, if you want these specific results to be displayed in a
different section of your user interface. This would require adding some
indicators to your user interface that will display your desired results, then
passing the relevant data back in UI messages to the user interface. From your
user interface, you can then update your customized indicators with the data
passed back from the UI messages.
Here are some links for further reading related to result recording and UI
messages.
Result Recording:
What are the Different Levels For Which I Can Disable Result
Recording?
UI Messages:
Using
Default and Custom UIMessages
Using
Non-TestStand UI Controls in a User Interface
User Interface Messages (UIMessages)
I hope that helps. BR
AmirG

Similar Messages

How can i arrange that movies and picts are stored only once?, how can i arrange that movies and picts are stored only once?

how can i arrange that movies and picts are stored only once?, i find them in thumbnail, i movie, imovie thumbnails, and some times in cache.mov or as imovie proyects

The movies themselves are stored only once. The other files you're seeing are small ones that are used to reference, display and access the main file. If you check the file sizes, you'll see that only one (the movie file itself) is large.
If you don't want anything saved but the main file, stop using iMovie.

I have iPhoto 11, 9.4.1 installed. When my library was upgraded, I got a message the photos couldn't be imported and I need to repair iPhoto permissions. How do I do that? My photos are there, but I can no longer drag them to the photo stream.

I have iPhoto 11, version 9.4.1 installed. When my library upgraded, I got a message that the photos couldn't be inported and I need to repair iPhoto permissions. How do I do that? My photos are there, but I can no oonger drag them to the photo stream.

Disable Photo Stream in iPhoto's preferences and then go back and reenable it. See if that will jump start the process. If that doesn't help try this: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto check its preferences to meka sure all is as you expect and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

How to medium and small subclasses Taxonomy table are shown on the Portal it? Currently only display subcategories

How to medium and small subclasses Taxonomy table are shown on the Portal it? Currently only display subcategories

From within OEM it doesnt look possible. User defined metrics (UDM) can only return number or a string. The alertlog fetch is done via alertlogViewer.pl while being passed a couple of parameters.
OEM does have a preliminary/rough api available at http://www.oracle.com/technology/products/oem/emx/index.html but I havent seen anyone make use of it yet.
If you use just a web connection then you will probably run into security issues as a web server can usually only view/access stuff under their htmldoc dir.
Seems like some non-OEM very custom code is what you seek..

Using Windows 7 and LR 5 when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showi

Using Windows 7 and LR 5, when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showing pictures that do not match the query

Dan,
Here's what's going on in the catalog you sent me, "Joel & Caitlin's Wedding". There is the keyword "gwenn", which is explicitly assigned to 7 pics. But keyword "schwartz" has a number of synonyms, including "gwenn", and it is assigned to 25 pics. There is no overlap between the two sets of pics.
I discovered these two occurrences by doing Metadata > Export Keywords, opening the exported file in an editor, and then searching for "gwenn". I found two occurrences of "gwenn":
gwenn
schwartz
{gwenn}
From this, you can see that the keyword "schwartz" has 9 synonyms, of which "gwenn" is one.
The filter criterion "Keywords Contain gwenn" will match the 7 pics that are explicitly assigned the keyword "gwenn", and it will also match the 25 pics assigned the keyword "schwartz", because that keyword has a synonym "gwenn".
This illustrates the behavior I mentioned above: The criterion "Keywords contains x" will match against any of a pic's assigned keywords, any of those keywords' ancestor keywords, and any of the synonyms of the assigned keywords and their ancestors.
So LR is operating correctly here, if not in a way that's easy to understand.
It appears that you are using the synonyms of "schwartz" to represent individual members of the Schwartz family. A better way of representing family relationships is to have a parent keyword "Schwartz", with subkeywords for each family member, e.g. "Gwenn Schwartz", "Joe Schwartz", "Jane Schwartz", etc. Repeating the family name in the subkeywords has a couple of advantages. LR usually only displays the "leaf" name of a keyword, so instead of showing you just "Joe", it will show you "Joe Schwartz", helpful when there are a number of different people whose first name is "Joe". Also, if you ever export your pics to other software, it may not understand the LR hierarchy and won't show the parent keywords, so again it's more informative to see a keyword named "Joe Schwartz" rather than "Joe".

HT3228 I have one of the origin iPads. Suddenly when I receive an email only the headings are shown - the body of the text is blank. Also previously received emails have also had the text body removed. Any suggestions as to what caused this?

I have one of the original iPads. Suddenly (from yesterday) when I receive an email only the headings are shown - the body of the text is blank. Also previously received emails have also had the text body removed. Any suggestions as to what caused this?

Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

How to edit a read-only file?

PDF files that I used to be able to edit to are now suddenly read-only. Across the top bar, it says "The file you have opened complies with the PDF/A standard and has been opened read-only to prevent modification." How do I change that so I can make edits? Under Security Properties, it says Signing and Filling Forms is allowed. I have Adobe Reader X.

Thanks. In case others have the same question, that mode is under Documents (in Preferences)

How to create table that is not scrollable but shown as pages?

Hi,
I'm using JDeveloper 11.1.1.3 and working on Fusion Web application (ADF BC and ADF Faces).
My client is demanding that tabels looks similar to those in ADF 10.1.3 with pages not scrollable.
Is it possible to create such tables in Fusion? How would I do that?
Best regards

Yes I have tried that but only found answers that explaining tunning query of VO with how much records are going to be fetched at one time.
I was thinking about option that you could actually chose to which page do you want to go and not with scroller.

Why is that only 2039 songs are copying when there are clearly more songs to be copied

i tried copying songs from my MUSIC Folder
in my USB to my itunes
and there are more then 4000 songs in it
but when i try copying the songs to Itunes
only 2037 songs are bieng copyed
i dont know why is this happpening
can you please give me advice how to goo on about this
please let me know asap

BLAZE999999RR wrote:
i tried copying songs from my MUSIC Folder
in my USB to my itunes
and there are more then 4000 songs in it
but when i try copying the songs to Itunes
only 2037 songs are bieng copyed
i dont know why is this happpening
What type are these songs?
Where did they come from?
Do they play in the Finder? (select one and press the space bar).

Why my tracks are not shown in Album view and Artist view, only Album Artworks are shown???

Dear,
I have not have this problem in the previous version of iTune. As soon as i upgraded it to iTunes 11, it happens.
The problem in here is all my songs, tracks are still here, i can see all of them in "songs view". However, when i change the view to Album View, and click into the Album artwork, there is no track there. When i double click into the Album Artwork, the first song of the album will be played normally.
Same story to the Artist View. Only the Album Artworks are shown and the rest is completely blank.
I have absolutely no idea what is going on here and obviously i am not satisfy with this new version.
Is there any way for me to fix this problem? Please help!
Otherwise i will need to use other software for music playing.
Regard,

Refer this article
The Microsoft.SharePoint.SPFieldCollection.AddFieldAsXml method
http://blogs.msdn.com/b/sharepointdev/archive/2011/01/20/why-do-my-new-list-fields-not-appear-on-the-new-edit-or-display-forms.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

How can I display multiple numeric limit test in operator interface

I am using Teststand 3 and I want to display additional information like the limits and the results in the sequence UI control. Adding new columns to this control is no problem, so it works good with any step type, that has a single result. But how can I display the information of a step that has multiple results ? The rows of the sequence UI control are limited to a single line.
Regards
Dirk Schüller-Möller

Dirk,
If you want to display several results for a single step, then you will need to either create a new column for each result or have an expression in your column that will format in a single string all the result that you want to display.
What you can not do is spawn the result of a single step across several rows (only one step per row).
Best Regards,
Alejandro del Castillo
Ni

How to edit text that is too fuzzy

I am trying to edit a psd doc that I received form someone else. It is supposed to be a diet guide that someone created for me. I need to edit it.
When I open it, it opens very small. In image size, it is 105*75. The doc is 7*5. The resolution is 15
I can zoom in on the doc, but when I do the text is so fuzzy that its impossible to make out so I can edit it.
I tried going into Image size and changing the res to 300. This increases the size of the image to 2100*1500
After it finishes resampling, the image is larger. I unzoom, but the text is stil way to fuzzy to edit.
What am I doing wrong?
Phillip

Should have is the opritive word. I am atatching a couple screen shots. The 1st one is as the doc looked when 1st imported. The 2nd one is zoomed in.

It's sending my messages as a text message when I'm texting another iPhone. How can I fix that? The messages are green and not blue. This just starting during half my conversation.

I was texting another iPhone when right it the middle of my conversation, it turned from blue to green. Now its sending all my messages as text messages and not iMessages. How can I fix this?

It could be that your signal dropped to GSM which is why it sent as a normal text. You need wi-fi, 3G or HSPDA to send as an iMessage. As does the receiver

How can I verify that pop-up upgrades are safe?

I am experiencing occasional pop ups asking that I upgrade Firefox -- ie- download and install the upgrade/update offered with the pop-up. Is this offering legit?

hello robfeimer, first you're right to be careful about such notices, since recently it has become a fairly often used tactic by malicious websites to try to trick users into downloading malware-infested versions of the browser. as a rule of thumb, when you are getting prompted to download and run a .exe file to update firefox, it will be a scam, since firefox handles updates internally...
you can always initiate a check for updates manually in the firefox ''menu > help (?) > about firefox''.

Keynote is auto scrolling how can I prevent that? My settings are "manual".

I use the iPad a lot for presentations. There are a couple classes I give where keynote will advance, up to four slides, with out me telling it to. The settings are set to manual. It's very frustrating! Need some help. Thanks!
Ed

Disable Power Nap in the Energy Saver pane of System Preferences. Uncheck the box marked Enable Power Nap... in each of the tabs.

How to edit UserInterface that only Limit-tests are shown

Similar Messages

Maybe you are looking for