How to empty out Olap Cache for a query?
Hi experts,
I think the olap cache for a query should be resetted to zero after a data load (right?), if i have understood well how it works. Where can i check the olap cache for the query? I'd like to ckeck the change of the Olap Cache for a specific query.
I checkt in the Cache Monitor but I haven't found any data.
Francesco
Hi
You can use the Transaction code RSRCACHE
Regards
N Ganesh
Similar Messages
-
Pre-fill the OLAP cache for a query on Data change event of infoprovider
Hi Gurus,
I have to pre-fill the OLAP cache for a query,which has bad performance.
I read a doc 'Periodic Jobs and Tasks in SAP BW'
which suggested sum steps to do this
i hav created the setting for Bex broadcasting for scheduling job Execution with data change in info provider
thereafter doc says "an event has to be raised in the process chain which loads the data to this InfoProvider.When the process chain executes the process u201CTrigger Event Data Change (for Broadcaster)u201D, an event is raised to inform the Broadcaster that the query can be filled in the OLAP cache."
how can this b done please provide with sum proper steps
Answers are always appreciated.
Thanks.Hi
U need to create a process chain or use the existing process chain which you are using to load your current solution, just add event change process type in the process chian and inside it add the info provider which are going to be affected.
Once you are done with this go to the broadcaster and create new setting for that query...you will see the option for event data chainge in infoprovider just choose that and create the settings.
hope it helps -
OLAP Cache for Query Performance
Hi Experts,
I have below 2 Questions before we implement OLAP Cache for our Queries:
1) We have 15 imporatant queries - which do NOT have any variable/selection screen.
(question here is will it work for those kind of queries which dont have any selection screen/ variant ? ) --> client wants to prime the cache for few queries which dont have variable screen.
In this case, say if data is later filtered on any CHAR , will it take the data from Cache?
2) I have a query which initially will have few characteristics in the drill down when we first execute and users would be drilling down on many other characteristics after that. So if I want to fill OLAP cache for this query then what is the best way so that each drilldown in the query gets data from cache.
Thank you,
-SuHi Raghavendra,
Thanks for your response.
For first Question, Do you mean , even if we do not have any Selection varaibale on Query--we still can fill OLAP cache for it for its all values (i.e. No selection means "*") ?
If this is the case, then what we need to defile in General Precalculation (Variable assignment) while creating a new setting for the query.
Thanks,
-Su -
Filling OLAP Cache for 3 Bex queries
Dear Experts,
Here, We would required to fill the OLAP cache for four bex queries using the Broadcaster Settings.
can any one please suggest for the following.
how to schedule the OLAP chache filling for 3 different queries at a time. do we need to perform this activity individually for three times for three different queries or can we club three queries and do schedule using only one varaint.
Request you to suggests the steps for performing this activity
Thanks in advance,
MannuHey,
this may be useful for you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f048c590-31a4-2c10-8599-bd01fabb93d4?quicklink=index&overridelayout=true
Regards,
Kiran -
How to find out the Tcodes for the exits
Hi All,
how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
Customer Exits: EXIT_RFEBBU10_001
EXIT_RFEKA400_001
EXIT_RFFOEXIT_100
User-Exits: USEREXIT_DELETE_DOCUMENT
USEREXIT_FIELD_MODIFICATION
USEREXIT_MOVE_FIELD_TO_VBAK
USEREXIT_PRICING_PREPARE_TKOMP
BADI: CUSTOMER_ADD_DATA_CS
HISTORICAL_VALUES
MD_ADD_ELEMENTS
MD_CHANGE_MRP_DATA
MD_PIR_FLEX_CONS
MD_PLDORD_POST
ME_REQ_POSTED
NOTIF_EVENT_SAVE
Can anyone help on this <urgency factor removed>.
Regards
Ksihore
Edited by: Suhas Saha on Feb 20, 2012 12:58 PMi have just started reading about all these-user exits ,customer exits etc.
i have read somewhere that:call to customer exits are triggered by function modules exits.
the structure of function modules are like this:
EXIT_RFEBBU10_001
MEANS
Keyword EXIT followed by program name fllowed by three digits.
and the call is like this:
call customer function 0001.
From above we can conclude that this customer exit must be used in program RFEBBU10.
GOTO SE38 andenter prog name RFEBBU10.check for above function module.
for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
using Where used lists.
please Tell me if i m wrong! -
How to find out the description for the given field?
Hi All,
How to find out the description for the given field?
I mean ETTYP Desription is VTEXT. This we can find in TVEPT Table. So, How canwe find this?
Thanks in Advance
Sri...Hi Avi,
If i want to disply the fields like AUART and 'Description of AUART',
Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
my question is if i have given T184-AUART and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
Thanks in Advance
Sri... -
URGENT: How to find out the Tables for Routines in BW.
Hi BW Gurus,
How to find out the Tables for Routines in BW.
I have this routine id <b>45XFAEI7LKIFIRDUKQG127YWW</b> and it is in inactive state and i want to activate it.
thanks in advance,
points will be rewarded.
Regards,
Maruthi.Hi Maruthi,
Check table RSUPDROUT using the routine id as input for the field CODEID. You will get the technical name of the update rule.
Cheers,
Praveen. -
How to find out the link for the tables for sub contract PO
Dear All,
How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
Please provide the solution for the Table related to ABAP.
Thanks,
V.V.Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK. -
How to config a shared cache for multiple environments with C API
How to config a shared cache for multiple environments with C API? Just like Java edition. Chapter 2. Database Environments
I want to open large number of databases, at least 10,000. But as the counts of databases opened increase, the db->open operation become very slow. It almost cost 2 hours to 10,000 databases.
So I try to distribute these databases to multiple environments ( for example, 5 envs ). And in order to improve the efficient of memory use, I want to share cache between envs.Hi,
It is not clear what you meaning about multiple environments. Do you mean these environments are in different directories or in the same directory ? If you mean environments in different dirs share the same cache, it is interesting why you need that.
If you do not use DB_PRIVATE to open the environment, the created cache will be on disk, in the environment directory, so it can be shared by multiple processes and multiple threads. Currently, the cache file is in the environment directory, and we do not support specifying a separate directory for cache only.
Regards,
Oracle Berkeley DB. -
How do i clear java caches for Mac OS X, version 10.6.8?
how do i clear java caches for Mac OS X, version 10.6.8?
Sarah2565 wrote:
should i keep the "keep temp files" box checked after removing Java caches?
Yes. Always keep the default settings unless you have a specific reason not to.
If you are a heavy user of Java programs or applets, you may need to clear the cache files after Java updates because the old caches may interfere. -
How to find out responsibility attached for particular user through query
hi
How to find out responsibility attached for particular user through query
Regards
9841672839Hi,
Following sql will help you find the responsibilities associated with the users in oracle applications.
SELECT frt.RESPONSIBILITY_NAME, furg.end_date
FROM
fnd_user_resp_groups furg,
FND_RESPONSIBILITY fr,
fnd_responsibility_tl frt,
fnd_user fu
WHERE fu.user_name = ‘&&username’
AND fu.user_id = furg.user_id
AND furg.responsibility_id = fr.RESPONSIBILITY_ID
AND frt.responsibility_id = fr.RESPONSIBILITY_ID
ORDER BY 1
Cheers... -
How to find out the script for the table using SQL
Hi,
Could any one tell me that how to find out the script for the table using SQL.
Thanks,
kamalKamal,
You can find the SQL query in Advanced tab of Answers
Thanks,
Balaa... -
How to enable OHS compression/cache for OBIEE
Hi i have installed OHS (11.1.1.7) and webcache on OBIEE 11.1.1.7. Does any one know how to enable/configure compression/cache for OBIEE analytics? Also how to validate if compression is working?
Hi Anke,
all tables that have been created in V9.7 with attribute COMPRESS YES will be compressed statically .
db2 " select count(*) , rowcompmode from syscat.tables group by rowcompmode "
After the upgrade to 10.5 all tables created with attribute COMPRESS YES will get rowcompmode='A' but old tables created with V9.7 will stay with rowcompmode='S' .
You can change tables from rowcompmode='S' to rowcompmode='A' via ALTER TABLE . After this all new pages or old pages that are touched will be adaptively compressed. But old pages that are not touched will only be static compressed. To get all pages of an existinbg table adaptive compressed you need to move data. For example with DB6CONV.
Regards
Frank -
How to analyse the time taken for a query
Hey gurus ,
How to find the time taken for a query to execute .
Regards,
VenkateshHi,
Time taken to execute a query = FRONT END TIME + OLAP TIME + DB TIME.
front end time is time taken to do format in BEX.
olap time is time taken to aggegate data in OLAP buffer.
db time is tme taken to collect data at data target.
to fine all these information
goto RSRT -> give query name -> execute+debug -> it will display all the fields > check fields what ever u want.
Regards,
Haritha. -
How can we send read mode for a query..?
How can we send read mode for a query..?
thanks in advance
regardsHi Chaudhary.
I am not sure I understand your question correct?
Do you want to set a query to read only so it can not be changed? If so you should be controlling this with authorizations.
Hope it helps.
BR
Stefan
Maybe you are looking for
-
Am I the only person that took a performace hit after "Upgrading" from my 1.5GHz G4? My POS 2.16 GHz dual core takes 30 seconds longer to boot than my G4, not to mention it just seems so sluggish. Hopefully the apple dealer will take it back, if not
-
Bulleted list, type breaking to next line
I'm working in ID CS3. I set up a nested style sheet for a bulleted list. However, the type is breaking too soon--there is still space on the line for more text, but it is breaking it. When I backspace the type trying to bring it up, it will do it, b
-
How to take value of Total Compenations- >Basic -> Global Value in PLSQL Code. Thanks
-
Comparing two data records of same IDOC
Hi, In PI, we need to compare two data records of same IDOC to figure out if what type change occurred. For example, BENFIT3 IDOC contains data records tilted "E1BEN04". When there are multiple "E1BEN04" data records, then we need to compare the da
-
Home page loads fine but all othes pages load in no styleeven through it is set to basic page style
started today dident load home page right had to reload it sence then the home page has been loading fine all search pages have loaded in no style. i click view, go down to page style it set to basic page style