How to enable archive at table level

Hello Everyone,
We are having performance issue when timesheet transfer job runs since the no of records in CATSDB table is more(4,013,039 Entries).
I would like to know how to enable archiving at table level.so that timesheet transfer job doesnt run for a long time.
Appreciate your response.
Regards,
Vadi

You can only archive data based on archiving objects and not based on individual tables as it has to maintain the consistancy within the database.
Following links might help you.
[http://help.sap.com/saphelp_nwpi71/helpdata/en/8d/3e4e0c462a11d189000000e8323d3a/content.htm]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d76f5301-0b01-0010-2a97-9938052ddf81]

Similar Messages

How to give user a table level access in database ?

Hi All,
I am working on SQL server managemnt 2012.
I need to provide access to one of the table in database.
How can we do it ?
Thanks in advance.
Regards
msbilearning.

Hi Bhanu,
Yes i want to give read acess to that particluar user.
Do i have to add that particular user to somewhere ?.
Because this simply doesn't work.
For ex- xyz\abc is user.
GRANT SELECT on [Table_Name] toxyz\abc
This wont work.
any solution.
regards
msbilearning.

How to apply Table level Break in the WEBi Report

Hi,
How we can apply the table level break in the WebI Report.
I know a bit bt i dont know its right or wrong.. Initally we normally create a table(with the values(which has 2rows(1: for naming and 2: for associating the object with it at down of it ie., one above and one below)) and at the top of that present table we will insert a "ROW ABOVE" to the naming row and then we insert a "Row below" to the object values and drag the first coloumn of the first row almost invisible(naming row) and then the same in next row(objects associating values for naming)... is this ryt.. if NO thn let meknow the various ways to do it..
Thank you in Advance....

Hi,
what is your requirement. if to show subtotal then create one table and select one column and apply break.
Thanks,
Amit

How to Archive a Table ( Z table) for which there is no Archiving Object

Hi folks,
We want to archive around 16 tables tables which includes some standard tables and some z tables. We want to archive them. But after cheking in SARA we found that, there is no Archiving Object available for those tables.
So how can we archive these table? Do we need to use some z program to explicitely archive these tables of there is some mechanism in SARA to archive them?
Thanks
PG

You have to create your own archive object, first take a look at some documentation like [Archive Development Kit|http://help.sap.com/saphelp_nw04s/helpdata/en/2a/fa0391493111d182b70000e829fbfe/frameset.htm] and then [Developing Archiving Solutions|http://help.sap.com/saphelp_nw04s/helpdata/en/2a/fa042d493111d182b70000e829fbfe/frameset.htm] .. then use SARA on your z_archive_object.
Regards,
Raymond

How to map lookup main table field in another main table using MDM 7.1?

We created a new SAP MDM 7.1 repository with multiple main tables. The first main table is called ProductMaster table which contains Products information. The ProductCode is the primary key and the only display field for the table during data loading process. The second main table is ProductByRegion table which has a main table lookup field ProductCode and a RegionId field. These two fields (ProductCode and RegionId) combine as the PK for this main table. Both main tables have key mapping enabled.
I was able to load ProductMaster table using Import Manager. But Iu2019m having trouble to load data into ProductByRegion table using MDM Import Manager. Although I have met all the 5 requirements below (excerpted from MDM Import Manager Reference Guide P.222), the ProductCode wonu2019t show up on the destination value pane. If I mapped all productCode to NULL field, ProductCode wonu2019t load. If I u2018Addu2019 all ProductCode to Destination Value pane, the Import Manager added duplicated rows to Product Master table while only loading 1 record to ProductByRegion table. I canu2019t get ProductCode show up in Matching Destination Field list. When I checked ProductMaster records in MDM Data Manager, I right-clicked on one of records, chose Edit Key Mappings, it didnu2019t show anything. However, if I right-clicked on one of those duplicated rows, Edit Key Mapping shows remote system and key correctly.
Where did I do wrong? How can I fix the problem?
Thank you for help in advance.
From: SAP MDM Import Manager Reference Guide:
Mapping to Main Table Lookup Destination Fields
Import Manager handles main table lookup fields (Lookup [Main])
differently than other MDM lookup fields. Specifically, Import Manager
does not display the complete set of display field values of the records
of the underlying lookup table. Instead, the values it displays for a main
table lookup field are limited by both the key mappings for the lookup
table and the values in the source file.
Also, Import Manager does not automatically display the values of a
Lookup [Main] destination field in the Destination Values grid when you
select the field in the Destination Fields grid. Instead, for a main table
lookup field value to appear in the Destination Values grid, all of the
following conditions must be met:
u2022 The lookup table must have key mapping enabled
u2022 The lookup field must be mapped to a source field
u2022 The source field must contain key values for the lookup table
u2022 The destination value must have a key on the current remote system
u2022 The destination valueu2019s key must match a source field value
NOTE ►► The current remote system is the remote system that was
selected in Import Manageru2019s Connect to Source dialog (see
u201CConnecting to a Remote Systemu201D on page 416 for more information).
Vicky

Hi Michael,
Thank you very much for your response. I'm new to SAP MDM, I need some clarification and help regarding your solution.
I did use two maps to load ProductMaster and ProductByRegion separately. Here were my steps:
1. create main table ProductMaster with key mapping enabled at the table level and set ProductCode as unique and writable once (primary key).
2. create a map to load ProductMaster record from a staging table located an oracle database. But Key mapping didn't show anything when I looked at them using Data Manager.
3. create main table ProductByRegion with a lookup field looking at ProductMaster table. This field and RegionId combines as a unique field for ProductByRegion table.
4. create a map to load ProductByRegion table. But ProductCode records only shows on the source pane not destination pane and can't be mapped properly.
My questions:
1. How can I "Ensure that you add key mapping info for all ProductMaster records" besides enabling Key Mapping on the table level?
2. How can I define a concatenation of ProductCode and RegionId as a REMOTE KEY"?
Thanks a lot for your help!
Vicky

Enabling archive log

Hi all,
1) How to enable archive log in oracle 10g. Found a link in google. http://cuddletech.com/articles/oracle/node58.html
Is it the correct way, need to down the database.
2) Could the archive log affect the performance of the database, if i have average of 1 write transactions to the database? I have a database that have already switch on by my precessder. I notice that it generate a 40,000kb of file every 3 minutes.

The questions are, how often are your redo log switches, are the users noticing a performance issue, what level of service have you agreed to for backup and recovery?
There can be trade-offs made, depending on the exact circumstances. As Ed noted, not losing data is the prime directive. There are many ways to avoid losing data, someone has to decide which are most appropriate and which are just too expensive. Someone playing what-if scenarios with your projected budgets is going to have a different idea about that than someone who is in charge of millions of dollars of online orders. DW and DSS systems often have other places to get the data and may not require being able to point-in-time recover. It depends.
What you need to avoid is managers saying things like "we only care about restoring to last nights backup," when they don't understand what they are saying.
Some bulk-loading situations can benefit from nologging operations, and some (like a massive update in an app upgrade) can benefit from going out of and into archivelog mode, since such things can generate huge amounts of redo without a requirement to recover halfway through them. Just be sure and take an appropriate backup after such things. That also means, take a backup as soon as you go into archivelog mode.

Schema level and table level supplemental logging

Hello,
I'm setting up bi- directional DML replication between two oracle databases. I have enabled supplemental logging database level by running this command-
SQL>alter database add supplemental log data (primary key) columns;
Database altered.
SQL> select SUPPLEMENTAL_LOG_DATA_MIN, SUPPLEMENTAL_LOG_DATA_PK, SUPPLEMENTAL_LOG_DATA_UI from v$database;
SUPPLEME SUP SUP
IMPLICIT YES NO
-My question is should I enable supplemental logging table level also(for DML replication only)? should I run the below command also?
GGSCI (db1) 1> DBLOGIN USERID ggs_admin, PASSWORD ggs_admin
Successfully logged into database.
GGSCI (db1) 2> ADD TRANDATA schema.<table-name>
what is the deference between schema level and table level supplemental logging?

For Oracle, ADD TRANDATA by default enables table-level supplemental logging. The supplemental log group includes one of the following sets of columns, in the listed order of priority, depending on what is defined on the table:
1. Primary key
2. First unique key alphanumerically with no virtual columns, no UDTs, no functionbased
columns, and no nullable columns
3. First unique key alphanumerically with no virtual columns, no UDTs, or no functionbased
columns, but can include nullable columns
4. If none of the preceding key types exist (even though there might be other types of keys
defined on the table) Oracle GoldenGate constructs a pseudo key of all columns that
the database allows to be used in a unique key, excluding virtual columns, UDTs,
function-based columns, and any columns that are explicitly excluded from the Oracle
GoldenGate configuration.
The command issues an ALTER TABLE command with an ADD SUPPLEMENTAL LOG DATA clause that
is appropriate for the type of unique constraint (or lack of one) that is defined for the table.
When to use ADD TRANDATA for an Oracle source database
Use ADD TRANDATA only if you are not using the Oracle GoldenGate DDL replication feature.
If you are using the Oracle GoldenGate DDL replication feature, use the ADD SCHEMATRANDATA command to log the required supplemental data. It is possible to use ADD
TRANDATA when DDL support is enabled, but only if you can guarantee one of the following:
● You can stop DML activity on any and all tables before users or applications perform DDL on them.
● You cannot stop DML activity before the DDL occurs, but you can guarantee that:
❍ There is no possibility that users or applications will issue DDL that adds new tables whose names satisfy an explicit or wildcarded specification in a TABLE or MAP
statement.
❍ There is no possibility that users or applications will issue DDL that changes the key definitions of any tables that are already in the Oracle GoldenGate configuration.
ADD SCHEMATRANDATA ensures replication continuity should DML ever occur on an object for which DDL has just been performed.
You can use ADD TRANDATA even when using ADD SCHEMATRANDATA if you need to use the COLS option to log any non-key columns, such as those needed for FILTER statements and KEYCOLS clauses in the TABLE and MAP parameters.
Additional requirements when using ADD TRANDATA
Besides table-level logging, minimal supplemental logging must be enabled at the database level in order for Oracle GoldenGate to process updates to primary keys and
chained rows. This must be done through the database interface, not through Oracle GoldenGate. You can enable minimal supplemental logging by issuing the following DDL
statement:
SQL> alter database add supplemental log data;
To verify that supplemental logging is enabled at the database level, issue the following statement:
SELECT SUPPLEMENTAL_LOG_DATA_MIN FROM V$DATABASE;
The output of the query must be YES or IMPLICIT. LOG_DATA_MIN must be explicitly set, because it is not enabled automatically when other LOG_DATA options are set.
If you required more details refer Oracle® GoldenGate Windows and UNIX Reference Guide 11g Release 2 (11.2.1.0.0)

Archiving customerown tables

hi,
does anyone how you normally archive customown tables?
e.g.
we have normal table bsec and we have created a bsec with some additional fields.
now we ann archive them.. together? or creating an own archive object?
Thanks a lot
Stefan

Hi Stefan,
To archive custom tables, you should use Archive Development Kit (ADK). you can create own archive objects for custom tables and corresponding archiving programs.
For modified standard with additional fields, maybe you need to modify the archive object and the archiving programs accordingly.
pls see the link for info on ADK:
http://help.sap.com/saphelp_nw04s/helpdata/en/2A/FA0391493111D182B70000E829FBFE/frameset.htm
hope this helps,
Naveen

How to retrive the Direct purchase entries from table level? S_ALR_87012050

Hi All
In our current project we need to retrieve the direct purchase report from table level. Can you please provide me the direct purchase related table? Normally we are executing the standard report S_ALR_87012050
to extract the direct purchase entries. We need to know which table has the direct purchase entries.
Regards
K.Gunasekar

K,
Your problem description is still insufficiently detailed.
It appears now that you are searching for asset numbers. Please confirm.
Your selection criteria "Inventory Number NE 0" doesn't appear to make much sense. Inventory number is not a quantity, it is the name of an object. I guess it is meaningful you have some inventory numbers named as '0'. I don't think this setting is causing your problem though.....
You didn't mention which table you accessed to discover that you had a perceived discrepancy. Which table did you browse to see the results you mentioned? Please describe the selection parameters for each table you reviewed, and the results for each table that you examined.
It is also the practice of many companies to archive asset data. If this is the case in your company, then the archived data will not reside in the 'A*" tables.
You mentioned that you used the same parameters to select the data. How did you select "Report Date" when you did the table extract? I am not aware of a field that is named "report date' in any of the tables mentioned.
Rather than slog through tables, you might want to try SE16, view "V_ANLAZ". This is a preconstructed linkage of ANLA and ANLZ that is used by S_ALR_87012050 as a starting point.
I really think you should consult with your ABAPers. In two minutes they can give you your answers. It will take me several messages and probably several days to get you the same answers.
Best Regards,
DB49

How to enable "top level navigation " in portal

Hi all,
I am unable to see the "top level Navigation" once I logged on to portal
Previously I was able to see that
I performed the following steps thats the reason why I am unable to see "top level navigation"
1 Logged on to portal
2 Content administration
3 Expanded Poratl Content
4 Expanded Content Provided by SAP
5 Expanded End User Content
6 Expanded Standard Poratl Users
7 Selected "Default Frame work Page"
8 In that selected Top Level navigation Iview and the iveiw properties I changed the property "Number of Display Levels " to "0" and choose save
As I have set "Number of Display Levels" to "0" I am unable to see "top level Navigation" Now,I want to change it to 2 for that I need to see the Content Administration role in the "Top Level navigation" Can anyone help me out how to enable "Top level Navigation"
Thanks in advance

undo the changes what you have done.
after you logon to the portal try the url below...this should take you to content admin directly from there modify the framework page and reset the property of TLN
http://yourserver:port/irj/servlet/prt/portal/prtroot/com.sap.portal.pagebuilder.IviewModeProxy?iview_id=pcd%3Aportal_content%2Fadministrator%2Fsuper_admin%2Fsuper_admin_role%2Fcom.sap.portal.content_administration%2Fcom.sap.portal.content_admin_ws%2Fcom.sap.portal.portal_content&iview_mode=default
Thanks
GLM

How to enable a check box using the table LVC_S_FCAT

hi,
I am working on reports. I have to have a check box and i am using the table LVC_S_FCAT to get the check box, i am getting the check box. how to enable it.

Hi Preethi,
try to set default the check-box with the
value '0', '1', '-', ' ' and 'X' (0/1 -> only display,
'-' field is not shown, ' ' and 'X' is normal)
and see the differences.
Hope it helps.
Regards, Dieter
Sorry, i thought you meen enable not editable.
Message was edited by: Dieter Gröhn

How to achieve this tree table (displaying/modifying non leaf level details) ?? Image inside

Region
location
Dept
Budget Available
Allot Budget
Unused Budget
Decision for unused budget
US
200$
User Input
NY
100$
User Input
CA
100$
User Input
HR
50$
User Input
IT
50$
User Input
---------30$--------
20$
LOV
Add to Location
Use for Future Project
Add to Region
Spend as Bonus
How to achieve this tree table ?
My client wants that they should also be able to manage budge at Location or region level not only at the leaf(Dept) level.
I did a lot of research and finally found out that the details can only printed at the leaf(Dept) level.......
We can not hard code Region, locations and departments in table rows. When table tree is displayed we will only show all the regions... (US, UK, SA, IND, AUS, CAN,RUS, JPN.... etc..)
For Example:
Locations for US (NY, CA, OKH, WC...... etc.)
Locaitons for UK (SC, ENG, WL..... etc) and so on......
Departments for CA (HR, IT, ADMIN, FIN, TRVL, OPRN........ etc. ..)
Thanks in advance... It will be really great help if I get some breakthrough...
-Rahul

Hi,
what if you add a transient attribute to those view objects? This way you don't need to change the table structure.
Frank

How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.

How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.
for this responsibility i need to have teh sets enabled. how to do teh same.
similar to OM ADMIN as shown below:
Kindly advice on teh steps. i believe its some menu /function inclusion can you pl share teh pointer.
regards,
bala

AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

How can we archive Partioning in parent child tables in Normalised way.

Hi Friends.
Could you please suggest me
How can we archive Partioning in parent child tables in Normalised way.
Bill_parent(
Bill_no number,
Bill_date date .-- I want to create Partition on this column
customer_id
Bill_Child{
bill_no number,
Bill_c_no number,
Item_code number
Qty number
Bill_Acsry{
Bill_c_no number,
acsry_it_code number,
qty number
Now for there Child Table I have also create a Bill_date column that is against Normalization
i.e
Bill_parent(
Bill_no number,
Bill_date date.
customer_id
) Partion by Range (Bill_date).......................
Bill_Child{
bill_no number,
Bill_c_no number,
Item_code number
Qty number,
Bill_Date date,-- against normalisation
}Partion by Range (Bill_date).......................
Bill_Acsry{
Bill_c_no number,
acsry_it_code number,
qty number,
Bill_Date date,-- against normalisation
}Partion by Range (Bill_date)....
with regards
Siddharth Singh([email protected])

Looks like the new Reference Partitioning feature in 11g is what you want. In previous versions I think you're stuck with the denormalisation.

How to Enable All rows in Table

Hi Friends,
I have to create table in firstview. My requirement is I will give 4 or 5 inputs at a time then click on save button that input data will be saved in ECC system
So in First View I have to create table by using apply template that time I have to pass all u201Cinput filedsu201D.
In that time the table having only first row editable and remaining rows will be disable. I need all rows in enable in that Table.
Or
My Requirement is how to enter multiple input detals at a time. At a time customer enter 4 or 5 inputs click on submit buttion that data will be saved in ECC System.
How to do this work.
Regards
Vijay Kalluri
Edited by: KalluriVijay on Mar 5, 2010 12:34 PM

Hi Vijay,
The number of editable rows in the table would be equivalent to the number of elements the node to which the table is bound contains. In your case, it might be only having one element for the node as so you can only see that row enabled while the rest of the rows are disabled. So, in case you want even the rest of the rows to be enabled then, you should just create more elements for the same node (with or without setting any of the attribute within).
Then, when you need to use the values in the table (existing or modified or new values), then loop through the table node and check if all the attributes within the node or the mandatory field value for the table entry is not nul, otherwise, ignore the corresponding table node element.
Rather, I would suggest you to have a button say "Add Rows" and within the action of the node, I would like you to create one more element for the table at the end. This way, you wont have any unnecessary element in the table to be checked for not holding any value.
Regards,
Tushar Sinha

How to enable archive at table level

Similar Messages

Maybe you are looking for