How to retrive the Direct purchase entries from table level? S_ALR_87012050

Hi All
In our current project we need to retrieve the direct purchase report from table level. Can you please provide me the direct purchase related table? Normally we are executing the standard report S_ALR_87012050
to extract the direct purchase entries. We need to know which table has the direct purchase entries.
Regards
K.Gunasekar

K,
Your problem description is still insufficiently detailed.
It appears now that you are searching for asset numbers. Please confirm.
Your selection criteria "Inventory Number NE 0" doesn't appear to make much sense. Inventory number is not a quantity, it is the name of an object. I guess it is meaningful you have some inventory numbers named as '0'. I don't think this setting is causing your problem though.....
You didn't mention which table you accessed to discover that you had a perceived discrepancy. Which table did you browse to see the results you mentioned? Please describe the selection parameters for each table you reviewed, and the results for each table that you examined.
It is also the practice of many companies to archive asset data. If this is the case in your company, then the archived data will not reside in the 'A*" tables.
You mentioned that you used the same parameters to select the data. How did you select "Report Date" when you did the table extract? I am not aware of a field that is named "report date' in any of the tables mentioned.
Rather than slog through tables, you might want to try SE16, view "V_ANLAZ". This is a preconstructed linkage of ANLA and ANLZ that is used by S_ALR_87012050 as a starting point.
I really think you should consult with your ABAPers. In two minutes they can give you your answers. It will take me several messages and probably several days to get you the same answers.
Best Regards,
DB49

Similar Messages

How to retrive the deleted data in Z table

Hi Gyes,
How to retrive the deleted data in Z table.
Thanks & Regards,
Suresh

Hello Suresh
If you have not activated the technical setting "Log data changes" in the definition of your z-table (which is unlikely) then there will be no change documents available.
If you have downloaded your z-table entries sometimes you could use these data for recovery.
Otherwise your last change is to ask your basis team when the last backup has been made.
Regards
Uwe

How can we delete wild card entry from table

how can we delete wild card entry from table
i want adjust the seeting for order type print out form
like in 0id2 i have specified ordertupe nad print form in pm module
but in oid3 fro palnner group if i make star it is not taking specific defiend field

Hi....
Follow these steps....
1. Goto se16 and enter ur table name.. press F7 you can get selection screen now press F8...
2. Click one perticuler record that u want to delete.. and press Change icon in App'toll bar...
3. enter ?H at command field and again press enter...
4. switch into classical debugger...
5. write CODE at field ... it will gives EDIT as value...
6. Change that EDIT into SHOW and press pencel icon just beside the SHOW...
7. Now press F8...
8. you can get delete option over there...
Thanks,
Naveen.I

Urgent HELP - How to reduce the number of entries in table MESYBODY?

Does anyone know how to reduce the number of records in synchronization table MESYBODY and MESYHEAD? The reason I wanted to reduce these tables is because I believe they have so many duplicated entries that causes extremely slow performance everytime we sync. Currently, there are almost 50,000 records for approximately 100 users, and I believe it shouldn't be that much.
We are running into a problem that it takes approximately 25-30 minutes to sync.
Any advices would be highly appreciated.
Regards,
Dai

Hi Dai,
please try to run the middleware job WAF_MW_MAPPING. For some applications (Mobile Time and Travel for example) this helps to clean the tables.
Br, alex
alexander ilg
http://www.msc-mobile.com

Help! How to retrive the date and time from MySQL 'datetime' type

In my MySQL database, I have stored a data type 'DATETIME' as 20070412093012 which is interpreted as 2007-04-12 09:30:12, How to using Java method to retrive it from data base???
like resultSet.getDate('datetime')????or what is the method?

Have a look at the API documentation for ResultSet. Which of the methods documented there do you think might be what you need? If you can't tell which is the right one, then post your candidates here and ask a question about them.

How to Sync the Ringtone Purchased not from Itunes store to Iphone?

I purchased the ringtone from Amazon but after it was downloaded to the Itunes Library I could not transfer it to the Ringtone Icon in order to Sync it to the Iphone. Any ideas or advices. Thanks,

Have you converted the ringtone to .m4r format?

How to retrive the data from a sqlite file(.db3) in windows phone 8.1(runtime)

hey guys
i installed the sqlite and sqlite-net as requested in other answers i found, changed to x86, and add the .db3 file in my project.
but the problem is how to retrive the data that already in the file( i am not creating any table or data in the app, just read)
all the answer i found is to create a table first and then read the table, i tried to skip the step of creating a table, and read from the table directly, but failed with " no such table", by the way, i set the property of the .db3 file as "content",
"copy if newer"
can anyone please help? i appreciate that !

Hello,
From your description, you want to read data from available sqlite file. When you add the sqlite file into your project, you need to change the sqlite file build action to content. After deploying to device, the sqlite file is located in installation folder,
you need to copy that file into storage folder before reading data. Please try the following code snippets.
private async void Button_Click_9(object sender, RoutedEventArgs e)
//check if file exists in storage folder, and then copy to local storage
bool flag = await FileExistsAsync("Data.db3");
if (!flag)
var folder = await Package.Current.InstalledLocation.GetFileAsync("Data.db3");
await folder.CopyAsync(Windows.Storage.ApplicationData.Current.LocalFolder);
// open sqlite and read data
public async Task<bool> FileExistsAsync(string fileName)
try
await Windows.Storage.ApplicationData.Current.LocalFolder.GetFileAsync(fileName);
return true;
catch (FileNotFoundException)
return false;
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

Can you please how to retrive the new netprice from the new validity period

Hi,
When you display a contract using ME33K and you click on a item and view its conditions(shift+F6), there might be 2 validity periods for a given item.
and each period will have different netprice in it.
One will be old date before the PO was created and the other new one which has validity till 31.12.999..We want to fetch the netprice for the new validity date but currently the program is fetching this data from the table EKPO which is having the netprice of the old date only..
Can you please how to retrive the new netprice from the new validity period

Thank you so much.
But I need more help specific to my problem.
Let me describe the same.
Suppose the PO creation date is 04.07.2007
The conditions for an item in a contract for the PO are as follows;
1. Validity from 04.07.2007 validity to 04.07.2007 Netprice = 100.00
2. Validity from 05.07.2007 validity to 31.12.9999 Netprice = 200.00
We need to always fetch the netprice from the validity period which always matches with the PO creatio date. here the value 100.00 should be the correct netpr as the PO creation date matches with the first validity period.
But the program is fetching the netprice 200.000 which belongs to the second validity period. That is beacuse the select statement which fetches the data for contracts collects on the basis of EKKO-kdate and ekko-kdtab.the fields kdate and kdtab retrieves the validity period of the contract which is from 04.07.2007 to 31.072007. This data is then used to retrieve the netpr data from EKPO and it fetched 200.00 as it retrives the netprice of current data in contract validity and h not with respect to PO creation date.
This data is then used to fetch the get the netpr data from EKPO.
what we need is the netprice for that validity period of item(Conditions) that matches with the PO creation date..
Below is the code where I'm selecting the data from ekko and ekpo for the contracts data..Can you please add the code snippet to the below attachesd subroutine to get the required data from KONV and KONP so that we can retrieve the correct Netprice.
FORM select_contracts USING p_s_cebeln LIKE s_cebeln[]
 p_c_k_bstyp TYPE ebstyp
 p_p_bukrs TYPE bukrs
 p_p_ekorg TYPE ekorg
 p_p_ekgrp TYPE bkgrp
*Begin of Mod-004
 fp_p_cernam type ty_r_ernam
 p_p_cernam TYPE ernam
*End of Mod-004
 p_s_werks LIKE s_werks[]
 p_s_matnr LIKE s_matnr[]
 p_s_lifnr LIKE s_lifnr[]
 p_s_val_dt LIKE s_val_dt[].
*mod-002
 data : l_amount type BAPICURR_D, " Net price
 l_waers TYPE waers, " Currency Key
 l_eff_amount type BAPICURR_D. " Effective value
 data: l_v_netpr type bprei.
*mod-002
SELECT ebeln
 bukrs
 bstyp
 aedat
 ernam
 lifnr
 zterm
 ekorg
 ekgrp
 waers
 wkurs
 kdatb
 kdate
 inco1
 INTO TABLE i_ekko
 FROM ekko
 WHERE ebeln IN p_s_cebeln
 AND bstyp EQ p_c_k_bstyp
 AND bukrs EQ p_p_bukrs
 AND ekorg EQ p_p_ekorg
 AND ekgrp EQ p_p_ekgrp
*Begin of Mod-004
 AND ernam EQ p_p_cernam
 AND ernam IN fp_p_cernam
*End of Mod-004
 AND lifnr IN p_s_lifnr
 AND ( kdatb IN p_s_val_dt OR kdate IN p_s_val_dt ).
IF sy-subrc EQ 0.
Populates internal table i_ekpo using EKPO table.
 SELECT ebeln
 ebelp
 loekz
 txz01
 matnr
 werks
 ktmng
 menge
 meins
 bprme
 netpr
 peinh
 webaz
 mwskz
 uebto
 untto
 erekz
 pstyp
 knttp
 repos
 webre
 konnr
 ktpnr
 ean11
 effwr
 xersy
 aedat
 prdat
 INTO TABLE i_ekpo
 FROM ekpo
 FOR ALL ENTRIES IN i_ekko
 WHERE ebeln = i_ekko-ebeln
 and aedat = i_ekko-aedat
 AND werks IN p_s_werks
 AND matnr IN p_s_matnr.
LOOP AT i_ekpo INTO rec_ekpo.
 MOVE rec_ekpo-ebeln TO rec_contr-ebeln.
 MOVE rec_ekpo-ebelp TO rec_contr-ebelp.
 MOVE rec_ekpo-loekz TO rec_contr-loekz.
 MOVE rec_ekpo-txz01 TO rec_contr-txz01.
 MOVE rec_ekpo-matnr TO rec_contr-matnr.
 MOVE rec_ekpo-werks TO rec_contr-werks.
 MOVE rec_ekpo-ktmng TO rec_contr-ktmng.
 MOVE rec_ekpo-menge TO rec_contr-menge.
 MOVE rec_ekpo-meins TO rec_contr-meins.
 MOVE rec_ekpo-bprme TO rec_contr-bprme.
 MOVE rec_ekpo-netpr TO rec_contr-netpr.
 move l_v_netpr TO rec_contr-netpr.
mod-002
 read table i_ekko into rec_ekko with key
 ebeln = rec_ekpo-ebeln.
 l_waers = rec_ekko-waers.
CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
EXPORTING
 currency = l_waers
 amount_internal = rec_contr-netpr
IMPORTING
 AMOUNT_EXTERNAL = l_amount.
 rec_contr-netpr = l_amount.
mod-002
 MOVE rec_ekpo-peinh TO rec_contr-peinh.
 MOVE rec_ekpo-webaz TO rec_contr-webaz.
 MOVE rec_ekpo-mwskz TO rec_contr-mwskz.
 MOVE rec_ekpo-uebto TO rec_contr-uebto.
 MOVE rec_ekpo-untto TO rec_contr-untto.
 MOVE rec_ekpo-erekz TO rec_contr-erekz.
 MOVE rec_ekpo-pstyp TO rec_contr-pstyp.
 MOVE rec_ekpo-knttp TO rec_contr-knttp.
 MOVE rec_ekpo-repos TO rec_contr-repos.
 MOVE rec_ekpo-webre TO rec_contr-webre.
 MOVE rec_ekpo-konnr TO rec_contr-konnr.
 MOVE rec_ekpo-ktpnr TO rec_contr-ktpnr.
 MOVE rec_ekpo-ean11 TO rec_contr-ean11.
 MOVE rec_ekpo-effwr TO rec_contr-effwr.
mod-002
 CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
 EXPORTING
 currency = l_waers
 amount_internal = rec_contr-effwr
 IMPORTING
 AMOUNT_EXTERNAL = l_eff_amount.
 rec_contr-effwr = l_eff_amount.
*mod-002
 MOVE rec_ekpo-xersy TO rec_contr-xersy.
 APPEND rec_contr TO i_contr.
 CLEAR: rec_ekpo,rec_contr.
mod-002
 CLEAR : rec_ekko,l_amount, l_eff_amount,l_waers.
mod-002
 ENDLOOP.
Modifying i_contr using i_ekko.
 SORT i_ekko BY ebeln.
 LOOP AT i_contr INTO rec_contr.
 READ TABLE i_ekko INTO rec_ekko WITH KEY
 ebeln = rec_contr-ebeln
 BINARY SEARCH.
 MOVE rec_ekko-bukrs TO rec_contr-bukrs.
 MOVE rec_ekko-bstyp TO rec_contr-bstyp.
 MOVE rec_ekko-aedat TO rec_contr-aedat.
 MOVE rec_ekko-ernam TO rec_contr-ernam.
 MOVE rec_ekko-lifnr TO rec_contr-lifnr.
 MOVE rec_ekko-zterm TO rec_contr-zterm.
 MOVE rec_ekko-ekorg TO rec_contr-ekorg.
 MOVE rec_ekko-ekgrp TO rec_contr-ekgrp.
 MOVE rec_ekko-waers TO rec_contr-waers.
 MOVE rec_ekko-wkurs TO rec_contr-wkurs.
 MOVE rec_ekko-kdatb TO rec_contr-kdatb.
 MOVE rec_ekko-kdate TO rec_contr-kdate.
 MOVE rec_ekko-inco1 TO rec_contr-inco1.
 MODIFY i_contr FROM rec_contr.
 ENDLOOP.
ENDIF.
REFRESH: i_ekko,
 i_ekpo.
CLEAR : rec_ekko,
 rec_ekpo,
 rec_contr.
ENDFORM. "select_contracts
Thanks.

HT201272 How do I download previously purchased albums from iTunes when the album has either disappeared from my computer or the tunes are not playable? The album shows as purchased on the iTunes store, but not available to download to my authorized devi

How do I download previously purchased albums from iTunes when the album has either disappeared from my computer or the tunes are not playable? The albums show as purchased on the iTunes store, but not available to download to my authorized device. I also have albums that appear in my library, but are not able to be added to my iPod from my computer

When you download something from the iCloud, it is a brand new licensed copy. Your iCloud account just contains a notation that you have this app. It isn't storing an actual copy of the app from your Mac.

Re:How can we delete the concurrent node entry from the FND_NODE table

HI ,
11.5.10.2 on Oracle Solaris on SPARC (64-bit) .
How can we delete the concurrent node entry from the FND_NODES table without running Autoconfig.
Currently we are having 3 nodes RAC and we are deciding to remove one node from the RAC and all 3 nodes are registered as concurrent node with application but concurrent manager is running only on one node.
Lot of the custom configuration we did it at application web tire level. If we run the Autoconfig at that time we need to redo those changes again that we are trying to avoid.
Regards .

we are trying to avoid to run FND_CLONE.setup_clean because it will delete all the nodes entries from the FND_NODES.If those entries are invalid then they should be deleted.
Running AutoConfig after purging the table will populate it with the correct entries.
In order to populate the nodes entries again we need to run autoconfig and it will change the server id in fnd_nodes and then we need to redo the ADI client configuration on users PC and redo all the changes that we made in jserv and webserver.For ADI Clients, you should use the correct server ids which will be populated in the table for you once you run AutoConfig.
For jserv configuration, you can refer to (Customizing an AutoConfig Environment [ID 270519.1]) to make the preserve all your custom setup/configuration after running AutoConfig.
If there any custom script to delete only one node from the fnd_node so that we don't need to run autoconfig after that, then I really appreciate.No.
Thanks,
Hussein

How do I get my purchased movies from iTunes to show in my Library without storing all the GBs on my hard drive? [I want to show the Cloud Purchases.]

Hey Hey!
Running OSX 10.9.4 and iTunes 11.3
I am pretty sure that this has been addressed somewhere, but I could not find it - so thanks up front!!!
How do I get my purchased movies from iTunes to show in my iTunes Library without storing all the GBs on my hard drive? I want to show the Cloud Purchases without having hundreds of GBs taking up my HD space.
Thanks!

Deborah,
You cannot import contacts from your Nano to your PC via iTunes. The syncing process is only one way. However, if you enable disk mode on your iPod, open it up in a Windows Explorer window, you should see a Contacts folder. From there you can copy them back over to your PC.
Even though this article is talking about adding contacts to the PC, it should walk you through some of the steps mentioned above.
http://support.apple.com/kb/HT2419?viewlocale=en_US
B-rock

HT204370 How do I download a purchased movie from the cloud to my iPad I?

How do I download a purchased movie from the cloud to my iPad I?

You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.

I got a MacBook Pro for the first time and just install iTunes.... how to I get my purchased songs from my Windows 7 to my new MacBook Pro

I got a MacBook Pro for the first time and just install iTunes.... how to I get my purchased songs from my Windows 7 to my new MacBook Pro..... please try to make it easier for me since im new to the Mac OS

1) Copy all music files to a thumb drive / external hard drive.
2) Open iTunes on your MacBook Pro (congrats!)
3) Under the File Menu, select "Add to Library." Navigate to the folder with your music in it and click "Open." Bam! Music.

How to retrive the deleted entries in the ztable

please let me know how to retrive the deleted entries in the ztable.

>
Naseer uddin wrote:
> Hi,
>
> While creating a table have u activated the buffering (full).
> if not then it is not possible to retrive the lost data, and if u have activated the full buffering of table then it is possible to retrive data, up to some extent, using transaction Code se14.
Complete Nonsense.*
buffering doesn't mean that it will buffer the records back in database ,once you deleted.it means it will allow the buffer the table to memory only while read access.

What can I do to get back to a point that I can directly purchase Apps from my itouch via wi-fi. I was able to before I purchased an app on my PC and loaded it into the device via the sync cable.

What can I do to get back to a point that I can directly purchase Apps from my itouch via wi-fi. I was able to before I purchased an app on my PC and loaded it into the device via the sync cable. My itouch 2G was bought 2nd hand, so when trying to get Apple support I was unable to register my device because I didn't know it's original purchase date. Note: I am still able to download the apps to my computer and load/sync them into the device.

Why can you not buy from the ipod?
What happens when you try?
Error message?
What does it say?
Any info?

How to retrive the Direct purchase entries from table level? S_ALR_87012050

Similar Messages

Maybe you are looking for