How to enable fastcgi on sun one web server 6.1 SP6

Hi, all
I fail to install fastcgi on sun one web server 6.1 SP6. When i access php page, the following errors are displayed in error log.
[18/Oct/2006:14:08:45] failure (21781): for host x.x.x.x trying to GET /chkwww.php, responder-fastcgi reports: FCGI1062: Stat failure
[18/Oct/2006:14:08:45] failure (21781): for host x.x.x.x trying to GET /chkwww.php, responder-fastcgi reports: FCGI1073: Unable to service the request even after trying 0 times
The following is the environment:
Web Server path: /i03_01/SUNWebSP6
PHP 4.4.2 installation path: /i03_01/php-fcgi
PHP library path: /i03_01/php-lib
PHP configuration: ./configure prefix=/i03_01/php-fcgi enable-fastcgi with-mysql=/i03_01/tmp/mysql-standard-4.1.12-sun-solaris2.8-sparc enable-mbstring=all enable-mbregex enable-exif with-gd with-png-dir=/i03_01/php-lib with-zlib-dir=/i03_01/php-lib with-jpeg-dir=/i03_01/php-lib with-t1lib=/i03_01/php-lib with-freetype-dir=/i03_01/php-lib
libfastcgi.so path: /i03_01/SUNWebSP6/bin
The following is my configuration:
In mime.types, add this line at the bottom:
type=magnus-internal/fastcgi exts=php,php3,php4
In magnus.conf, add this line at the bottom:
Init fn=load-modules shlib="/i03_01/SUNWebSP6/bin/libfastcgi.so"
In obj.conf, add these lines at the top.
<Object name="default">
Service type="magnus-internal/fastcgi"
fn="responder-fastcgi"
app-path="/i03_01/php-fcgi/bin/php"
min-procs="1"
app-env="PHP_FCGI_CHILDREN=1"
app-env="PHP_FCGI_MAX_REQUEST=200"
app-env="PHPRC=/i03_01/SUNWebSP6/https-www/config"
</Object>
Anyone can help me? Thanks.
Message was edited by:
polyuitjerry

Stat failure is caused when either Fastcgistub or app-path is not accessible.
Is "Fastcgistub" executable too in /i03_01/SUNWebSP6/bin directory ? If not, then copy it to that directory. Make sure it has exec permission.
Do you see Fastcgistub process ? If yes, then check the app-path (/i03_01/php-fcgi/bin/php). Is it accessible ?
And also, check "Fastcgistub.log" file under <webserver-temp-dir> directory for any error msgs.

Similar Messages

Core dump when stop sun one web server 6.1 SP6

Hi all,
I install the sun one web server 6.1 sp6 and run as FastCGI mode. Each time i stop the web server, the "core" file is generated. The following is the steps which I setup the web server:
Server Path: /i03_01/SUNTest
1. Install Sun One Web Server 6.1 SP6
2. Install FastCGI library
3. Install php4.4.2
./configure prefix=/i03_01/php-fcgi enable-fastcgi
make
make install
4. copy the php binrary to /i03_01/SUNTest/bin
5. vi magnus.conf
Init fn=load-modules shlib="/i03_01/fastcgisp4/plugins/fastcgi/libfastcgi.so"
6. vi mime.types
type=magnus-internal/fastcgi exts=php
7. vi obj.conf
<Object name="default">
Service type="magnus-internal/fastcgi"
fn="responder-fastcgi"
app-path="/i03_01/SUNTest/bin/php"
max-procs="20"
app-env="PHP_FCGI_CHILDREN=2"
app-env="PHP_FCGI_MAX_REQUEST=1000"
restart-interval="60"
app-env="PHPRC=/i03_01/SUNTest/https-www/config"
</Object
8. Start the Web Server
9. Open the browser, run any php programs. (the php process will be created at this time)
10. Stop the web server (* core file is generated at /i03_01/SUNTest/https-www/config)
Here are the error logs:
1. /var/adm/messages
Dec 15 15:05:54 hkpu30 genunix: [ID 603404 kern.notice] NOTICE: core_log: Fastcgistub[17146] core dumped: /var/cores/Fastcgistub.hkpu30.17146.core
2. Fastcgistub.log
<<<<<< ERROR LOG >>>>>>
Fastcgistub - version (1)
created child - 17492
clean stub
stopping child exit handler
stopping monitoring
terminating child - 17492
3. pstack core file
core 'core' of 17491: Fastcgistub -b /tmp/https-hkpu30.polyu.edu.hk-e7343eaa/Fastcgistub_174
fee07f70 fprintf (0, 18ef0, fee43a54, ffbef3c0, 0, 49db8) + 34
000172d4 __1cNserveRequests6F_v_ (9c, 0, 4c, 18ebc, 18f02, 0) + 260
00017aec main (bc, ffbef624, 0, 299bc, 18f35, 299b8) + 4f8
00012f34 _start (0, 0, 0, 0, 0, 0) + 108
Any one can help me?
Thanks.

This has been fixed. But the plugin whch contains the fix (as part of Web Server 6.1) is not available for download yet.
Meanwhile, you can try using the FastCGI plugin bundled with Web Server 7.0 Techonology Preview ( http://www.sun.com/download/products.xml?id=446518d5 )

Poor Performance of Sun One Web Server 6.0 SP6

We are running on an E450 with 2GB of memory, Solaris 8 2/02 with Recommended and Security Patch Cluster from 31 Jul 03, Sun One Web Server 6.0 SP6, Macromedia ColdFusion 5, JDK 1.4.1_02. We are seeing intermittent (three or four times a day) performance problems, extremely poor response time.
A vanilla, �test� iPlanet web server was put up on port 2443 with https turned on and off. Repeated control tests on file operations (�copy link as�) showed similar results as those described in High Impact above. Changes to add KeepAlive parameters (in magnus.conf) showed no noticeable improvement.
Tests were conducted -- on the test server -- accessing the same file from two clients, one a thin client (TC), the other a Unix workstation (UW).
Results:
1) Sometimes process TC was started first and continued normally while process UW hung up; when this happened, only one httpd process was building cpu time;
2) Sometimes process UW was started first and continued normally while process TC hung up; when this happened, only one httpd process was building cpu time;
3) Sometimes both process TC and process UW continued normally regardless of which was started first; when this happened, two different httpd processes were building cpu time together;
Speculation on Process Management - speculation is that, in the case of the 3rd bullet above, iPlanet assigned different httpd processes to the two requests. In the case of the first two bullets, however, the belief is that iPlanet actually assigned the second request to the same process it had previously assigned the first request. In this case, the second request was left to wait. It appears that most of the work done by httpd children is performed by only two or three children, even when there are 10 available.
Questions;
Why are the other httpd children are not more fully utilized?
What about changing the number of Acceptor Threads?
Could turning on Native Polling help (UseNativePoll in magnus.conf)?
Any other thoughts about what is going on or how to fix the issue?
Thanks for any assistance
Excerpt from /etc/system
* Web Server and ColdFusion Setting
set shmsys: shminfo_shmmax = 2147483647
set shmsys: shminfo_shmmin = 1
set shmsys: shminfo_shmmni = 100
set shmsys: shminfo_shmseg = 50
set semsys: seminfo_semmns = 1750
set semsys: seminfo_semmni = 70
set msgsys:msginfo_msgmax = 65535
set msgsys:msginfo_msgmnb = 65535
set msgsys:msginfo_msgseg = 8192
set msgsys:msginfo_msgssz = 16
* Default is 512, which handles several thousand connections
*set tcp:tcp_conn_hash_size=262144
* Do not set to 0 in solaris 8 on Production Systems
*set sq_max_size=0
set rlim_fd_max=8192
set rlim_fd_cur=8192
* END of Web / ColdFusion Settings
Excerpt from /etc/rc2.d/S69inet
## Web Server and ColdFusion Settings
# Comment out tcp_slow_start_initial, because default is 4
#ndd -set /dev/tcp tcp_slow_start_initial 2
ndd -set /dev/tcp tcp_xmit_hiwat 32768
ndd -set /dev/tcp tcp_recv_hiwat 32768
ndd -set /dev/tcp tcp_conn_req_max_q 1024
ndd -set /dev/tcp tcp_conn_req_max_q0 4096
ndd -set /dev/tcp tcp_time_wait_interval 60000
ndd -set /dev/tcp tcp_keepalive_interval 900000
# Comment out next 4 to accept default
# - change only if tcp longer than 10 seconds expected
#ndd -set /dev/tcp tcp_ip_abort_interval 60000
#ndd -set /dev/tcp tcp_rexmit_interval_max 10000
#ndd -set /dev/tcp tcp_rexmit_interval_initial 3000
#ndd -set /dev/tcp tcp_rexmit_interval_min 3000
# Left out changing ephemeral (short lived) port
#ndd -set /dev/tcp tcp_smallest_anon_port 1024
# Keep default of 1480576
#ndd -set /dev/tcp tcp_cwnd_max 65535
## End of Web / ColdFusion Settings
Excerpt from magnus.conf
RqThrottle 1
MaxProcs 10
StackSize 131072
## Added for lightly loaded systems
KeepAliveQueryMeanTime 1
KeepAliveQueryMaxSleepTime 0

Because the security context is set as a process context, the NSAPI thread locks the process prior to setting the security context. The older NASPI plugin that we are using is not reentrant, it will not work with the mulitthreading model. Under multithreading each thread would have access to the security context of each thread.

How do I configure a Sun One Web Server 6.1 to run JSP pages

I have a Sun One Web server version 6.1 running on Solaris 10.
The web server is not configured to run JSP pages. When I try and run a JSP page, I get an HTTP 405 error.
Can somebody please point me to the configuration directions, including changes to the obj.conf, magnus,.conf, etc.
Thanks

Web Container is enabled by default.
Here are my config files
$tail -1 magnus.conf
Init fn="load-modules" shlib="/export2/ws6.1sp11/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"$cat obj.conf
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
<Object name="default">
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
NameTrans fn="ntrans-j2ee" name="j2ee"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/export2/ws6.1sp11/ns-icons" name="es-internal"
NameTrans fn="document-root" root="$docroot"
PathCheck fn="unix-uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index" index-names="index.html,home.html,index.jsp"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service method="(GET|HEAD)" type="magnus-internal/imagemap" fn="imagemap"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="index-common"
Service method="(GET|HEAD|POST)" type="*~magnus-internal/*" fn="send-file"
Service method="TRACE" fn="service-trace"
Error fn="error-j2ee"
AddLog fn="flex-log" name="access"
</Object>
<Object name="j2ee">
Service fn="service-j2ee" method="*"
</Object>
<Object name="cgi">
ObjectType fn="force-type" type="magnus-internal/cgi"
Service fn="send-cgi" user="$user" group="$group" chroot="$chroot" dir="$dir" nice="$nice"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>JAVA settings in server.xml:
<JAVA classpathsuffix="" debug="false" debugoptions="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n" dynamicreloadinterval="-1" envclasspathignored="true" javahome="/export2/ws6.1sp11/bin/https/jdk" nativelibrarypathprefix="" serverclasspath="/export2/ws6.1sp11/bin/https/jar/webserv-rt.jar:${java.home}/lib/tools.jar:/export2/ws6.1sp11/bin/https/jar/webserv-ext.jar:/export2/ws6.1sp11/bin/https/jar/webserv-jstl.jar:/export2/ws6.1sp11/bin/https/jar/ktsearch.jar">
        <JVMOPTIONS>-Djava.security.manager</JVMOPTIONS>
        <JVMOPTIONS>-Djava.security.policy=/export2/ws6.1sp11/https-alamanac.india.sun.com/config/server.policy</JVMOPTIONS>
    <JVMOPTIONS>-Djava.security.auth.login.config=/export2/ws6.1sp11/https-alamanac.india.sun.com/config/login.conf</JVMOPTIONS>
    <JVMOPTIONS>-Djava.util.logging.manager=com.iplanet.ias.server.logging.ServerLogManager</JVMOPTIONS>
    <JVMOPTIONS>-Xmx256m</JVMOPTIONS>
    <SECURITY anonymousrole="ANYONE" audit="false" defaultrealm="native">
      <AUTHREALM classname="com.iplanet.ias.security.auth.realm.file.FileRealm" name="file">
        <PROPERTY name="file" value="/export2/ws6.1sp11/https-alamanac.india.sun.com/config/keyfile"/>
        <PROPERTY name="jaas-context" value="fileRealm"/>
      </AUTHREALM>
      <AUTHREALM classname="com.iplanet.ias.security.auth.realm.webcore.NativeRealm" name="native">
        <PROPERTY name="jaas-context" value="nativeRealm"/>
      </AUTHREALM>
      <AUTHREALM classname="com.iplanet.ias.security.auth.realm.ldap.LDAPRealm" name="ldap">
        <PROPERTY name="directory" value="ldap://localhost:389"/>
        <PROPERTY name="base-dn" value="o=isp"/>
        <PROPERTY name="jaas-context" value="ldapRealm"/>
      </AUTHREALM>
            <AUTHREALM name="solaris" classname="com.iplanet.ias.security.auth.realm.solaris.SolarisRealm">
              <PROPERTY name="jaas-context" value="solarisRealm"/>
            </AUTHREALM>
    </SECURITY>
    <RESOURCES>
        </RESOURCES>
</JAVA>

How to deploy .war on Sun ONE Web Server 6.0?

Hi Everyone
I have been trying unsuccessfully to deploy a .war application using Sun One Web Server 6.0.
I only installed Sun ONE for the first time this morning and don't know much about web servers - yet.
I deployed the web application from the web-based admin console. I'm not sure exactly what to put in the URI field. I just deployed it on the only existing "virtual server". I don't really know anything about virtual servers.
Also: I installed with the defaults, what port should I try to access my app from?
The documentation doesn't help much - so please don't give me a URL to some docs i won't understand.
I miss the autodeploy offered by other tools. I have deployed this app before on other servers.
thanks in advance

The URI is the "virtual path" at which the web application is accessible. For example, if you deploy a web application at the URI /foo, you would access the web application by requesting http://server.example.com:port/foo/.
Unfortunately, I can't tell you what port your Web Server instance is listening on as that's configured at install time. If you don't remember the port you selected, check the server.xml configuration file. The port is recorded in that file.

Sun one web server 6.0 SP6 crashed

Hi,
I get the error message when accessing the web server instance all the time: "the page cannot be displayed" and the error log file says "[29/Dec/2003:09:28:34] catastrophe (12932): Server crash detected (signal SIGBUS) [29/Dec/2003:09:28:34] info (12932): Crash occurred in NSAPI SAF NSServletNameTrans "
Im running on HP-UX 11. Am I supposed to get a default web page from the web server instance? Please help.
thanks

Yes, you will get a default page(index.html) if the webserver instance starts up correctly. It seems the instance is not starting correctly for you, so no pages will get served.
Looks like a problem with JVM initialisation. Try to disable Java for that instance using the Admin-server and then apply the changes and start the instance. To disable Java for that instance:
From Admin Gui: select the instance that is having this problem, mange that instance. Use Java tab and disable Java for that instance. Apply the changes, restart it and test.
If it comes up fine, then it will confirm that you have a problem initialising the JVM for that instance. In that case you will have to check release notes to see if you have the required OS patches etc. If you still need further assistance, perhaps you should open up a support case to Sun Services.
Thanks
Manish

How to run servlets n sun one web server 6.1

hi guys,
did u know any ony one help me , I deployed n server but at calling time some error how to call at url tell me bye
bye

Stop spamming.
http://forum.java.sun.com/thread.jspa?threadID=622182

Access Log format for Sun One Web Server 6.0 SP6

Is it possible to add the Process Id to the access log? If so, what is the proper format for the access log entry in magnus.conf. We would like to be able to see which process each request used, just like in the error log.
Thanks

User agent and referer information can be logged. Refer to following docs(see under Table 7-1):
http://docs.sun.com/source/816-5686-10/07_magnu.htm#33046
Thanks,
Manish

Sun one web server 6.0 admin instance

Hi,
After installing Sun one web server 6.0 sp6 on HP-UX, the admin server instance seems to work fine (i.e. I can bring up the admin web page). However, I cannot bring up web page from other web server instance. it gives me this error "the page cannot be displayed". Am I supposed to get a default webpage from this web server? How can I tell if this web server is working properly? Please help.
thanks,
Paul

Hi,
thanks for your prompt reply Joe. No, I don't get anything in the access log but I got some error messages in error log. It looks like the error indicates the web server crashed. Please help. I've been struggling to get this web server running and it's going nowhere.
"[24/Dec/2003:08:40:19] catastrophe ( 8291): Server crash detected (signal SIGBUS)
[24/Dec/2003:08:40:19] info ( 8291): Crash occurred in NSAPI SAF NSServletNameTrans
[24/Dec/2003:08:40:26] failure ( 8290): Child process admin thread is shutting down
[24/Dec/2003:08:40:26] info ( 8326): Installing a new configuration
[24/Dec/2003:08:40:26] info ( 8326): [LS ls1] http://hpusam20, port 1040 ready to accept requests
[24/Dec/2003:08:40:26] info ( 8326): A new configuration was successfully installed
[24/Dec/2003:08:40:26] warning ( 8326): Port directive ignored
[24/Dec/2003:08:40:26] warning ( 8326): The server configuration may require more file descriptors than the operating system provides. If you encounter PR_PROC_DESC_TABLE_FULL_ERROR errors, you may wish to increase the operating system hard file descriptor limit from 1024 to 5763 (see your operating system documentation) or decrease one or more of the following settings: MaxFiles in nsfc.conf and ConnQueueSize, RqThrottle, and MaxKeepAliveConnections in magnus.conf."

Sun ONE Web Server & Remote User field

Hi,
I look for a tip to my Sun ONE Web Server 6.1 SP2 configuration.
I have:
- OS: Sun Solaris 8
- Apache 1.3 (listen port :80)
- Sun ONE Web Server 6.1 SP2 (listen port :81)
- Weblogic 8.1 SP4 (listen port :8001)
The 3 applications are in the same server.
My first configuration works:
- Apache works with basic authentification by password file (generate with htpasswd) and communicates with Weblogic
- Weblogic listens http requests and work with the remote user id (use method HttpServletRequest.getRemoteUser())
My second configuration doesn't work:
- Apache works with basic authentification by password file (generate with htpasswd) + reverse proxy mode (use VirtuaHost) and communicates with Sun ONE Web Server
- Sun ONE Web Server works with no authentification mode and communicates with Weblogic
- Weblogic listens http requests and works with the remote user id (use method HttpServletRequest.getRemoteUser())
The HttpServletRequest.getRemoteUser() returns null in my second configuration.
How I can configure my Sun ONE Web Server to foward the remote user id ?
Thank you.
Christophe.

Can you send your obj.conf?
I do not have a 6.1 Web Server installed, by guess work try
NameTrans fn="redirect" from="/index.html" url="/"
Also remove find-index or any such SAFs if you have in your obj.conf
PathCheck fn="find-index" index-names="index.html,home.html,index.jsp"Why do you need this?

Sun One Web Server 6.1 Eclipse Plugin?

I have Eclipse 3.1 with WST tools and Visual Editor plug-in installed. I am a
noob to this IDE and web solution. I want ot use Sun One Web Server for my web
application testing and implementation. I want my Dynamic Web Application
projects to build and use the Sun One Web Server I have installed and running on
my machine. The only server options I see are some Generic WebLogic servers and
JBOSS or Tomcat/Jakarta servers. How do I get the Sun One Web Server to show up
as an option when building a web application in Eclipse using WST?

I am look for the same like you did quite ago but I need free Eclipse Plugin for Sun One Web Server 7/8 and let me have ref if you could.

How Do I enable gzip compression on Sun One Web Server 6.0

How Do I enable gzip compression on Sun One Web Server 6.0

Hi,
Sun ONE webserver 6.0 is over 5 years old and is reaching end of support life. Please consider upgrading to webserver 6.1sp5 which is free:
http://www.sun.com/download/products.xml?id=434aec1d
or else the preview version of WebServer 7.0 (also free)):
http://www.sun.com/download/products.xml?id=446518d5
For webserver 6.1, the docs for setting up compression are at:
http://docs.sun.com/source/819-0130/agcontnt.html#wp1019634
and
http://docs.sun.com/source/817-6252/npgnsapi.html
Hope this helps

Enabling end - user access in Sun One Web Server 6.1 SP2

Hi,
I am new to Sun One Web Server 6.1 SP2 and I can't figure how to enable the end user access so that the end users can change their password.
On iPlanet 6.0 SP2, in the Distributed Admin page, I could enable Distrubuted Administration as well as end user access on the webserver. The end users could then change their own password. I can't find a similar feature in Sun One Web server 6.1 SP2.
Could anyone out there tell me how to get this done?
Thanks in advance!

Hi,
I just found from release notes that End user administration feature (which was under Distributed Administration ) is no longer supported in Sun One Web Server 6.1. [Problem ID 4865295 in release notes]
Could anyone provide a workaround to get over this and allow the end users to change their passwords?
Many thanks in advance,
auporna.

Enable secure session cookie on Sun ONE Web Server 6.1

How can I enable secure session cookie (JSESSIONID) on Sun ONE Web Server 6.1?.
For 6.0 is <session-cookie is-secure="true"/> inside the <web-app> tags in web-apps.xml but I'm not able to find this setting for 6.1.

There is a fix in 6.1sp5 that enables the session cookie to be marked as secure.
See the release notes and search for 6262885 under Issues Resolved in 6.1sp5:
http://docs.sun.com/app/docs/doc/819-2479/6n4p1bdea?a=view

How do you get Sun One Web Server to read white spacing in a url

Hi guys,
I am currently using Sun One Web Server and this is the problem that i am currently facing.
The url which is i am trying to read from the Sun One Web Server is http://test:8000/test/Testing%20A%20B
The error which i am getting is java.lang.RuntimeException: java.net.URISyntaxException: Illegal character in path
The reason why this is happening is because the original url is http://test:8000/test/Testing A B It has spacing in between the url. I cannot get rid of the spacing thru the code where its bound to a Content Management System. So the only way is to get the Sun One Web Server to be able to read this kind of url. There are about 300 to 400 of this types of url as they are dynamically generated.
I was looking at the obj.conf and magnum.conf file to see whether i can manipulate this url to work for this situation. But with no luck.
Can anyone please let me know if they have came across this problem.
Thanks.

Hi,
This is the stack Trace:
Error 500--Internal Server Error
java.lang.RuntimeException: java.net.URISyntaxException: Illegal character in path at index 29: /models/Sportwagon/Sportwagon SS V-Series
     at au.com.holden.cs.assembler.FriendlyURLAssembler.getInputURI(FriendlyURLAssembler.java:329)
     at au.com.holden.web.mvc.ViewUtil.getInputModelAndView(ViewUtil.java:29)
     at au.com.holden.web.mvc.navigation.ModelNavigationController.handleNoSuchRequestHandlingMethod(ModelNavigationController.java:17)
     at org.springframework.web.servlet.mvc.multiaction.MultiActionController.handleRequestInternal(MultiActionController.java:375)
     at org.springframework.web.servlet.mvc.AbstractController.handleRequest(AbstractController.java:153)
     at org.springframework.web.servlet.mvc.SimpleControllerHandlerAdapter.handle(SimpleControllerHandlerAdapter.java:45)
     at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:820)
     at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:755)
     at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:396)
     at org.springframework.web.servlet.FrameworkServlet.doGet(FrameworkServlet.java:350)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.net.URISyntaxException: Illegal character in path at index 29: /models/Sportwagon/Sportwagon SS V-Series
     at java.net.URI$Parser.fail(URI.java:2809)
     at java.net.URI$Parser.checkChars(URI.java:2982)
     at java.net.URI$Parser.parseHierarchical(URI.java:3066)
     at java.net.URI$Parser.parse(URI.java:3024)
     at java.net.URI.(URI.java:578)
     at au.com.holden.cs.assembler.FriendlyURLAssembler.getInputURI(FriendlyURLAssembler.java:326)
     ... 26 more
This is the path which was access by me using Sun One Web Server: http://poll:8006/models/Sportwagon/Sportwagon%20SS%20V-Series
As you can see that Sun One Web Server dont like spacing between url.
Does anyone know how to fix this problem thru configuration in Sun One Web Server?

How to enable fastcgi on sun one web server 6.1 SP6

Similar Messages

Maybe you are looking for