How to Enable Full text search in UCM with Oracle 10g

Hi,
Can you please guide me on how to enable full text search in UCM after I have installed it. My database is Oracle 10g. It would be great if you could guide me through the steps since I am very new to this product.
Regards
Ashish

Hi
Are you sure that your indexer is finishing without any errors? Check activeindex.hda under \search directory to see what is the variable set for activeindex variable? If Oracle Text is the indexer search enabled then the variable activeindex should either OTS1 or OTS2. If anything else then you have indexer problems that is not indexing documents.
Check the CS log file to see if indexer errors are shown there. If yes, then put it over here so that we can analyse it.
Hope it helps
Thanks
Srinath

Similar Messages

How to enable Full text search feature in Azure SQL DB - Web Edition

I have created an instance of Azure SQL DB web edition (basic), using the BizSpark a/c, for one of my global search feature, I need to enable/install full-text search , I don't find this option in Azure SQL DB web edition that I installed , would
appreciate any help on this.

Unfortunately full text search is not supported in Azure SQL DB.
Cotega - Azure SQL DB Monitoring, Notification and Scheduling service

Enable full text search

Hi,
Pls let me know whether we will face any ASE Server performance issues if we use full text search option on a bulk table which has more than 1 Crore rows after enabling "enable full text search" option.
Sample query is mentioned below.
select *
   frpm cust_text_search_tbl
where id_type = “PanCard”
    and CONTAINS ( id_no, 'X8036B' )
select *
   frpm cust_text_search_tbl
where and branch_code = “KL16”
CONTAINS ( fname, 'JOMY' )
select *
   frpm cust_text_search_tbl
where CONTAINS ( id_no, 'X8036B*' | “34 4173*” )
Regards
Jomy
Mob:91+9656622225

Just enabling the option should not affect performance.
Whether the performance of the feature meets your expectations depends on your expectations, I think you will just have to try it to see if it's performance is adequate for your needs or not.
The effect of using the feature on the performance of everything else on the system depends on how heavily you are using it and the resources you have (number of cpu cores, etc.).
-bret

Can we enable full text search using TOAD ?

Hi, i m new to oracle, i come from sql server background
There is a server in israel where oracle 10 g is installed. I stay in india. i want to connect to that database(with valid credentials) and want to know if i can enable full text search feature or any other related feature so that i can search a few keywords as i dont know what tables contain what data.
Plz guide

WhiteHat wrote:
923860 wrote:
Hi, i m new to oracle, i come from sql server background
There is a server in israel where oracle 10 g is installed. I stay in india. i want to connect to that database(with valid credentials) and want to know if i can enable full text search feature or any other related feature so that i can search a few keywords as i dont know what tables contain what data.
Plz guideyou want to be able to search all fields in all tables?
I don't think this is possible to do in any RDMS! to be a developer you must know the schema. When I was working with Toad it had such an option. I guess it is still there. And that was one of the things that was really really useful.
Of cause TOAD knows the schema. And you could choose where you want to search (include trigger code or not, include data, etc.).
But I'm not sure if there are any requirements for this option. The question should be better asked in a quest-TOAD forum.
Edited by: Sven W. on Mar 28, 2012 9:31 AM

Full Text Search In UCM

Currently we are looking at the integration of UCM and Webcenter. Can u please guide us in doing a full text search using UCM.
The steps we followed for full text search is
1. Stopped the Content Server service.
2. On the Content Server's file system, navigated to search folder in Content Server Installed Path and altered activeindex.hda with the entry change verity.1 to IdcColl1
3. Renamed all files under the following locations:
CS\search\lock
CSsearch\update
CS\search\rebuild
4. Started the Content Server service
5. Logged into CS and rebuilt the indexes from repository manager and restarted the CS from Admin Server Page
Please let me know if any of the steps is wrong or any more components need to be added.
We get no errors on doing fulltextsearch but we do not any result (displays "found 0 potential items").
Thanks in advance!

When checked the CS Log after changing metadata to fulltext and rebuilding indexes under collection rebuild cycle
helperservice: data exception in INDEXERSTATE.RECORDWEBCHANGE_SUB IndexerState.IindexerState Unable to find query 'IndexerState.IindexerState'. [ Details ]
An error has occurred. The stack trace below shows more information.
!$helperservice: data exception in INDEXERSTATE.RECORDWEBCHANGE_SUB IndexerState.IindexerState !csUnableToFindQuery,IndexerState.IindexerState
intradoc.data.DataException: !csUnableToFindQuery,IndexerState.IindexerState
     at intradoc.jdbc.JdbcConnection.getQueryDefAllowMissing(JdbcConnection.java:390)
     at intradoc.jdbc.JdbcConnection.getQueryDef(JdbcConnection.java:369)
     at intradoc.jdbc.JdbcWorkspace.execute(JdbcWorkspace.java:635)
     at helper.HelperUtils.execute(HelperUtils.java:1527)
     at helper.HelperService.doAction(HelperService.java:692)
     at helper.HelperService.doActions10g(HelperService.java:383)
     at helper.HelperService.doActions(HelperService.java:119)
     at helper.HelperUtils.executeService(HelperUtils.java:3185)
     at helper.HelperUtils.executeService(HelperUtils.java:3031)
     at helper.HelperUtils.executeService(HelperUtils.java:3027)
     at helper.HelperUtils.executeService(HelperUtils.java:3023)
     at helper.HelperFilters.doFilter(HelperFilters.java:1287)
     at intradoc.shared.PluginFilters.filter(PluginFilters.java:92)
     at intradoc.indexer.IndexerBulkLoader.createBulkLoad(IndexerBulkLoader.java:333)
     at intradoc.indexer.IndexerBulkLoader.doWork(IndexerBulkLoader.java:164)
     at intradoc.indexer.Indexer.doIndexing(Indexer.java:431)
     at intradoc.indexer.Indexer.buildIndex(Indexer.java:340)
     at intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1012)
     at intradoc.server.IndexerMonitor$4.run(IndexerMonitor.java:832)
Thanks!

How to do full text search in mobile apps?

Hi,
I want to be able to use the FTS module in sqlite to do leverage the powerful full text capability in it. But I was sad to learn that module are disabled in AIR (Has anybody gotten FTS module to work in AIR?)
Is there any way I can use the FTS module with SQLite. Android native developers use this all the time so I think not having this is a serious limitation for text based apps.
My alternatives right now are to:
Write my own indexer and scorer (lots of work)
Do full text search on the server side (breaks offline capability)
I hate both options. I am leaning toward righting my own indexer but what do you guys suggest I do?

I've got nearly the same concern. I want to add full text search on a mobile and desktop application, without any server.
I read in archived discussion that the FTS support was already considered before air 2.0.
Will we see it soon?

Full-text search in ucm10g with wc search taskflow

hi all,
I am using wc11.1.13 plus ucm10gr3.
I checked in a content with both Primary File and Alternate File , I used webcenter search taskflow to search word in alternate file, but search result show me the Primary File, how to resolve this issue?
I also opened a case in ucm forum.
Best regards

Hi Atrsams,
According to your description, you want to implement Full Text Search in Analysis Services Cube, right? Base on my research, there is no such a functionally to achieve Full Text Search in Analysis Services currently. And it seems that there is no any
solution or workaround for it. I recommend you to submit this at
https://connect.microsoft.com/SQLServer/ So that the product team can consider to solve it in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level
of service provided.
Thanks for your understanding.
Regards,
Charlie Liao
TechNet Community Support

Give me one query how to use full text search

fulltext catlog ,populating fulltext index one example
jitendra

fulltext catlog ,populating fulltext index one example
jitendra
Hello,
Please take a look at the following example:
CREATE DATABASE FULL_SEARCH_TEST
USE [FULL_SEARCH_TEST]
Create Table FullText_Search
Id Int Primary Key Identity(1,1),
Title Nvarchar(50)
GO
INSERT INTO FullText_Search VALUES(N'España')
SELECT * FROM FullText_Search
GO
CREATE FULLTEXT CATALOG FTSearch
GO
--Show all constraint names
SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
CREATE FULLTEXT INDEX ON FullText_Search
(Title) KEY INDEX PK__FullText__3214EC07558F517A
ON FTSearch;
ALTER FULLTEXT CATALOG FTSearch
REBUILD WITH ACCENT_SENSITIVITY = OFF
SELECT FULLTEXTCATALOGPROPERTY('FTSearch', 'accentsensitivity');
SELECT * from FullText_Search where contains(Title,'"España"')
GO
SELECT * from FullText_Search where contains(Title,'"espana"')
Regards,
Elvis Long
TechNet Community Support

Document Management / Full Text Search in Projects & SolMan Directory

Hello experts!
I want to implement Full Text Search in my SolMan and therefore need your help.
I have installed Trex 7.10 and am already able to search within my Solution Database (Problems/Solutions).
Now I want to be able to search within all documents in my SolMan Installation - e.g. Roadmaps, SAP Scenario Descriptions or my own uploaded documents.
In the IMG I already found the section Document Management but I cannot get the needed RFCs (IMSDEFAULT and IMSDEFAULT_REG) working.
There is already a RFC called IMSDEFAULT, which was created during the installation of Trex and runs the
Registered Server-Program: Trex_SOT_20080327090311
I tried to configure my RFCs according to the IMG but, as I said, cannot manage to get them working.
I hope anybody has an idea or an guide on how to implement Full Text Search!
Please be so kind and provide help - thanks in advance!
Best regards
Gerold

Gerold,
I am running into the same issues because we want to do full text search on project documentation within Solution Manager. The default RFC connections IMSDEFAULT_REG and IMSDEFAULT do not work with the standard settings.
We created one index for IWBSOLAR so maybe I also need to check IWBPROJ in SKPR06 for project documentation and create a new index for this one ?
The indexing for IWBSOLAR now fails although there seem to be over 6000 documents marked but none are put in the index. After indexing there is a list of the documents all with code 6401 but cannot find any where what this code means. It seems to be succesful as all entries are green.
Any help/suggestions on this topice would be greatly appreciated.

Kazehakase with full-text search in history using Hyper Estraier

A guide for Kazehakase with full-text history search using Hyper Estraier
I adopted qdbm and submitted hyperestraier in AUR, so you can enable full-text search frature by installing Hyper Estraier from AUR and rebuilding Kazehakase using srcpac or yaourt.
1. Install QDBM and Hyper Estraier from AUR. The easiest way is using yaourt. (If you prefer not to use yaourt, download tarball and do makepkg && pacman -U manually.)
yaourt -S qdbm hyperestraier
2. Rebuild Kazehakase using srcpac.
srcpac -Sb kazehakase
Of cource you can rebuild Kazehakase using yaourt.
yaourt -Sb kazehakase
You don't have to modify configure option in PKGBUILD of Kazehakase, because "--enable-hyper-estraier" is implied by default. If Hyper Estraier is installed successfully, you'll get "Hyper Estraier: yes" in configure messages.
3. Configure Kazehakase. To enable full-text search in history, run Kazehakase and go Edit>Preference>General and change UI Level to "Expert" and apply settings. Next, go Edit>Preference>History and set Search engine name to "hyper-estraier" and restart Kazehakase. Then you'll see "History Search" box next to "Internet Search" box.
Sorry for my poor English.

"ctxsrv" is no longer supported at version 10.1.
Instead PARAMETERS clause has SYNC option, and you can specify ON COMMIT for this.
If you created the database with DBCA and chose Oracle Text option, then you have no need to perform any further operations to configure Oracle Text.

Disable UCM Full-Text search (11.1.1.3.0)

Hi All,
We are having Oracle ECM module with IPM, UCM in 11.1.1.3.0 version.
We are pumping data to UCM via IPM.
We have configured our UCM as Full-Text search enabled. That is SearchIndexerEngineName=ORACLETEXTSEARCH
But now we want to disable that feature.
If we directly change SearchIndexerEngineName=DATABASE.METADATA will it fine ??
Is there any additional configurations to be done in UCM??
Or any additional parameters to be changed in the config files??
Thanks in advance.....

Hi Nir,
Yes, this configuration is fine. after that you have to restart the UCM Managed Server and run the "Collection Rebuild Cycle".
Regards
Ram

UCM Full-Text Search

Hi,
I have a problem with UCM (10gR4) full-text search. I does not return any results.
In the Repository Manager applet, Indexer tab, I have run the indexer (under Collection Rebuild Cycle) and waited until it finished. It said that it has indexed 5424 files as full-text.
Under *"Configuration for Stellent"*, I have the following data:
Search Engine:: DATABASE.FULLTEXT
Index Engine Name: DATABASE.FULLTEXT
Active Index: IdcColl1
So, I think everything looks fine. Does anybody know why it doesn't work?
Thanks in advance

During installation have to executed fulltextindex.sql that is available under oracle\ucm\server\database\oracle\admin folder?
If not kindly exectute it..

Full-Text Search is Enabled But It Is Not Working.

I Have Already Installed SQL SERVER 2008 ANd Full Text Search Is Also Running I Check It Via Query It Is Also Return !. Now What i M DO?????

Hello,
What's the database role of the current user? If it is not a a member of the db_owner, or db_ddladmin,
you must have CREATE FULLTEXT CATALOG permission on the database, or have REFERENCES permission on the full-text catalog and ALTER permission on the table or indexed view.
For example:
GRANT REFERENCES ON FULLTEXT CATALOG :: Catalog_name TO User ;
Reference:GRANT Full-Text Permissions
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

How to Use FULL TEXT Indexing Search on file names with brackets

I would like to use a FULL Text Seach query to find Files on a windows file system
The Problem is when the case comes up where there is a parentheses"()" in the file name. This example was created from a file copy being pasted in the same folder location as the original a few times.
Here is my code:
DECLARE
@SearchWord VARCHAR(50)
SET @SearchWord = '"KAP1556PP_P01(2).jpg"'
SELECT [FileName], [FilePath] FROM [dbo].[tblLegalPlan] WHERE CONTAINS(*, @SearchWord)
When I use Double quotes for the @Searchword I recieve no results.
SET
@SearchWord = '"KAP1556PP_P01(2).jpg"'
When I remove the Double Quotes for the @Searchword I recieve an error message:
SET
@SearchWord = 'KAP1556PP_P01(2).jpg'
Msg 7630, Level 15, State 2, Line 8
Syntax error near '(' in the full-text search condition 'KAP1556PP_P01(2).jpg'.
When I search for files containing TEXT up to the bracket i Get undesrired results obviously:
SET
@SearchWord = '"KAP1556PP_P01*"'
Results
FileName FilePath
KAP1556PP_P01(1).jpg BC\EPP\KAP
KAP1556PP_P01(2).jpg BC\EPP\KAP
I would like results where I can search for the file name and only one file is found matching the search word.
Thanks

Is this a SQL Server Reporting question? You maybe better off posting this in a more relevant forum.

***** in Full Text Search : Exception

Hi Everybody,
I have enabled the Full Text Search option in Oracle UCM but when I try to enter '*****' the system gives me an exception with full query generated and a failed message.
Could I get rid of the Lenghy error message by catching the exception or by wrinting a javascript validation.
Can someone let me know how can we go about both these options or if there is a ready fix.
Thanks in advance.

You can override the standard error page. Template for this page is identified by 'ERROR_PAGE'.
Jakub

How to Enable Full text search in UCM with Oracle 10g

Similar Messages

Maybe you are looking for