How to enable JScrollPane in a cell of the JTable

Hi,
I am able to place the components into the cell of the JTable. But I am unable to interact with the components like JTable or JComboBox after inseting them into a cell of the JTable.
This was the one of the Scenario:
Step 1: I created One JTable named as "insertTable"and adding to JScrollPane
Step 2: I'm able to inserted the newly created JTable ("insertTable") in to a cell of another JTable(like table inserting a table) using TableCellRenderer.
here was the problem. I am able to insert the newly created table into the cell. the "insertTable" size is greater the Cell size. So, the "insertTable" is appering with Horizantal and Vertical Scrollbars because the "insertTable" is added to JScrollBar. but I am unable to move the scrollbars.
please any one help me for this.

you still didn't try to learn the difference between cellEditor vs cellRenderer - as you were advised to do more than once in recent posts.
If you do, the answer will be obvious (to you :-). As long as you don't there's nothing to help
Cheers
Jeanette

Similar Messages

How to get the coordinate of a cell in the jtable?

How to get the coordinate of a cell in the jtable?
How to get the point of a cell in the jtable?
Thanks for help!

getCellRect(...);

How can i add a MouseMotionlistener to the cells in the JTable?

hi !
how can i add a MouseMotionlistener to the cells in the JTable?

yes i have.but that is different from adding MouseMotionlistener to the cells for me .
i just want get the values where the mouse moves to .

How to enable hyperlink for a cell in excel thru OLE?

Hi,
Iam using OLE2 to download data from an internal table into excel sheet.I want to enable hyperlink for one cell in each line of the excel. Please advice how to go abt it?
Regards,
Shambu

To hyperlink to the specific sheet in your workbook, you need to first create the sheet and use the parameter #3 of the Hyperlink's ADD method.
Try like this:
*.....Hyperlink to another sheet
GET PROPERTY OF e_appl 'Range' = e_range
    exporting
    #1 = 'A1'
    #2 = 'A1'.
GET PROPERTY OF e_activesheet 'Hyperlinks' = e_hyperlink.
get property of e_work 'Sheets' = e_sheets.
CALL METHOD OF e_sheets 'Add' = e_work2.
CALL METHOD OF e_hyperlink 'Add'
    EXPORTING
    #1 = e_range
    #2 = ''
    #3 = 'Sheet2!A1'.   "Targeted Sheet & Cell
*.....Hyperlink to another sheet
Regards,
Naimesh Patel

How to insert textfield in a cell of a jtable ?

Hi,
i m not sure how to insert a textfield into a cell of a jtable which already contains some text in the cell .. Can anyone juz show mi a simple program to do this ??? thanks in advance =)

Hi Michael,
i get wad u r trying to say ermm actually i did that already. But wad i need to do is such that in a cell, there will b some text displayed (which i have done so) but i also need to add an additional box for user to enter the values n in this case i haf choosen to add the jtextfield box .. But i m not sure how to ... sorry for the misunderstanding ~~~ n thanks for ya reply =)

How do I simply add one cell to the spreadsheet?

How do I simply add one blank cell to the spreadsheet? The rest of the items will move down or to the right.
Can't find the answer anywhere. Can't be that difficult. What am I missing?

s,
Yes, Select the cells that need to be moved and "Mark for Move." Then, Select the cell where you want the upper left cell of your marked range to move to and "Move."
It's the same number of steps, roughly, as spreadsheet programs that allow inserting cells. When you insert a cell in those other programs, you must then define the direction of the move, so it amounts to about the same amount of work.
Jerry

How to center chars inside of cells of the comb field (text field)?

Hello gurus,
[Intro]
I'm working on preparation of the legal form for tax return. Due to sophisticated form structure and customer's demand to prepare return of enourmous size (more than thusand pages) I decided to remake obsolete form using "comb of" option in order to reduce size of the source and prevent memory allocation issues on customer side.
[Issue details]
Legal requirement is to have typeface Courier New 16pt-18pt and cells of the certain size.
This is how the form provided by tax authorities looks like:
Here you can see that chars are somehow centered inside of the cells but when I create comb in my livecycle designer it is not the case and I have different layout:
Look how letters are placed inside of the cells. After some research I've found out that there is a left margin which always exists in every cell of the comb, most probably triggered by the border. Tried to edit XML source but didn't achieve any significant success. The issue is not caused by the narrowness of the cells and reproductible even with extra wide ones.
Here is my current XML:
          <field h="5.7mm" name="STR_230_TOT_TX" w="60mm" x="4.264278in" y="4.458417in" anchorType="middleCenter">
               <ui>
                  <textEdit hScrollPolicy="off">
                     <border hand="right">
                        <edge stroke="dotted"/>
                        <corner stroke="dotted" thickness="0.176mm"/>
                     </border>
                     <margin bottomInset="0mm" leftInset="0mm" rightInset="0mm" topInset="0mm"/>
                     <para hAlign="left" vAlign="top"/>
                     <comb numberOfCells="15"/>
                  </textEdit>
               </ui>
               <font size="16pt" typeface="Courier New"/>
               <margin bottomInset="0mm" leftInset="0mm" rightInset="0mm" topInset="0mm"/>
               <bind match="dataRef" ref="N140_TAX_AMOUNT"/>
               <assist>
                  <speak disable="1"/>
               </assist>
            </field>
This is how comb field is supposed to be rendered (screenshot from the documentation):
Everything is centered and it is a behaviour I supposed to see.
Are there any possible solutions how to place chars at center of the cells?

Hi Igor,
It's the font that you are using that causes the problem.
I found it weird, your problem, so I quickly made a form with a text field with a comb. I did not have the problem.
So I took your snippet and added it to my form, then I have the same problem. You are using Courier New, a font that has the same width for all characters. I don't know why the problem is there as for me it should be in the center as with all other fonts. I would report this as a bug to support.
I know it's not a solution for you, but that seems to be the root of the problem. Maybe you can look for another font, similar to Courier New, but that does not have a fixed width. I looked it up and it appears that there's a font called Hellschreiber, that uses the same letterforms, but is proportional. The font is not freely downloadable, so I cannot test for the moment. Another page says this: "There is a proportional font that kinda looks like Courier. It is called American Typewriter. " Again, I have not tested.
Hellschreiber Serif is a proportional typeface using Courier letterforms as a basis.
http://en.wikipedia.org/wiki/Courier_(typeface)

How to enable a ipod when you forgot the icloud you used to set it up ?

I had my friend charge my ipod because my charger broke and when I got it back she said that her cusin disabled my ipod on "accident" . So I was like okay cool like whatever I thought it was going to be easy to enable it but when I connected it to itunes it said to type in the icloud you use as well as the password to reciver your ipod and I dont remember it. If I go to the apple store they wont believe that this ataully happened and I have no idea where the recipt is please help this my first time ever having a device linked to apple please please help me !!!!

Hey ther Jadabigs11,
It sounds like you either need to find the Apple ID email address that you registered the iPod Touch with, or need to reset the password associated with that email address. If you need to find the email outright, this article will help you do that:
Apple ID: How to find your Apple ID - Apple Support
if you need to reset the password, use this article instead:
Apple ID: Changing your password - Apple Support
Thank you for using Apple Support Communities.
Regards,
Sterling

HOw can I handle event at Cell level in JTable

I am having this problem. I want to handle the double click and selection change event at individual cell level or row level in JTable. The FoccusListener and MouseLIstener I am adding are working only at Table level.
By onSelectionCHange I mean when a user momves from one cell to another cell.
How can I get a handle to individual cell and handle evetns on it.
Please help
Thanks.

javax.sing.table.AbstractTableModel.addTableModelListener(TableModelListener l)

Need detailed instructions on how to enable " Check for Updates" option on the Firefox installation directory for Windows XP.

I have Firefox 2.0 (running Windows XP) and want to update it to 3.6, but the "Check for updates" option on the Help menu is grayed out and need to enable this option by changing permissions on the Firefox installation directory. I need detailed instructions on how to access the Firefox installation directory and change the permissions.
Can someone please assist?
Thank you.

See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

I jailbroke a phone and don't really care if it is jailbroke anymore. So i want to go to 5.1 and I can't figure out how to enable bonjour which seems to be the problem

I jailbroke a phone and no longer want it that way I would rather upgrade to 5.1 software and the problem seems to be because it disabled bonjour from i tunes . ,
How do i enable bonjour or just how do I get 5.1 software on a jailbroke phone?

Bonjour has nothing to do with this.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup to get rid of that garbage which removed all built-in secuirty included with iOS on your iPhone.
If your iPhone is not recognized by iTunes, check this link.
http://support.apple.com/kb/TS1538
http://support.apple.com/kb/TS1591?viewlocale=en_US

How to enable "Tap to Capture" option on the camer...

I recall disabling the "touch to capture" photo setting, where by tapping the screen the camera takes the picture. How do I re-enable this feature?

Try 'Settings', Swipe left and the scroll down to Photos+Camera. First option

How to enable Chase Referral? After doing the same how to verify that part?

Hi,
Please guide me on enabling chase referral on my Active Directory server. Also after enabling the same how to verify it?
Setup info:
Forest1:
root.com(PDC)
child.root.com(Child)
Forest2:
test.com(PDC)
ind.test.com(child1)
us.test.com(child2)
Both these forests has two way transitive trust enabled.
We have product where we can add LDAP settings so that AD users can be mapped to that server. I have added Forest1->PDC to that settings where I am able to retrive the objects during LDAP search. Chase Referral option is available, when I enable the option
and try to search for a user present in Forest 1-> child domain no object is returned.
Is there any thing that needs to be done on AD servers. Please help.

Hi Arun,
I suggest you check this blog below to see if it helps:
Referral Chasing
http://blogs.technet.com/b/ad/archive/2009/07/06/referral-chasing.aspx
Best Regards,
Amy

How do I refer to a cell in the last row of my table?

The subject says it all, really. I have a table which will have rows added to it over time; I'd like to be able to refer to a value in the bottom-most row.
Let's say table 1 has ten rows. In a cell in table 2 I'd like to get the value in Table1::C10
Now I add five rows to Table 1. I'd like the cell in Table 2 to now show the value in Table1::C15
Is that possible? It's the iPhone version of Numbers, if that makes a difference.

In Numbers for OSX, it may be achieved with :
=OFFSET(Table 2 :: $A$1,ROWS(Table 2 :: $A)-1,2)
But if my memory is right, it's one of the features which failed in the first version of Numbers for iOS.
I never had opportunity to test upon new version.
Yvan KOENIG (VALLAURIS, France) mardi 26 juillet 2011 16:52:14
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to enable firefox to start quickly? The way it does today, it sucks!

It's frustrating the way Firefox browser starts. Are there any settings that can be done that enable it to start quick?

It's frustrating the way Firefox browser starts. Are there any settings that can be done that enable it to start quick?

How to enable JScrollPane in a cell of the JTable

Similar Messages

Maybe you are looking for