How to enable the logs in applets

I have a signed jar which uses commons-logging all the logs are in debug mode how to set the debug on to view the logs in the java console.
i have tried the following things
jre/log properties is set to debug
applet debug is set to true
there is a SimpleLogFactory class which extends the Log Factory class.. i have set the levels to 2 here for debug mode
i am still not able to see the log.debug statements.

i have tried doing setting the run time params as well it does not work:(
i can see the applet debug but the applet calls other classes which uses log.debug stmts i am not able to see those debugs
in the init mrthod of my applet i have
public void init()
/*  40 */     if (log == null)
/*  47 */       if ((super.getParameter("DEBUG_ON") != null) && (!_initialized))
/*  49 */         SimpleLogFactory.setLogLevel(2);
/*     */       else
/*  53 */         SimpleLogFactory.setLogLevel(4);
/*  56 */       log = LogFactory.getLog(UploadApplet.class);
/*     */     }

Similar Messages

  • How to enable the Exchange 2010 Admin Audit logs in Event Viewer

    How to enable the Exchange 2010 Admin Audit(Mailbox Auditing) logs in Event Viewer.
    - Sivashankar. Please mark as answer/useful if my contribution is helpful

    Hi Siva,
    We could execute the command below to view Administrator Audit Logging settings:
    Get-AdminAuditLogConfig
    If it is not enabled, please run the command below:
    Set-AdminAuditLogConfig -AdminAuditLogEnabled $True
    In addition, here are some references for you to utilize this feature:
    Configure Administrator Audit Logging :
    http://technet.microsoft.com/en-us/library/dd335109(v=exchg.141).aspx
    Search the Administrator Audit Log :
    http://technet.microsoft.com/en-us/library/ff459262(v=exchg.141).aspx
    Regards,
    Rebecca Tu
    TechNet Community Support

  • HT3986 Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard? Many Thanks

    Hi All
    Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard - the standard wired apple keyboard works fine via this key but not the new wireless keyboard?
    Many Thanks

    Holy crap, this fixes the issue.  At least temporarily it has.  I should add that my issue was single finger forward/back swipe stopped working on the magic mouse in Firefox since Mavericks came along.  I have been fighting this since I upgraded to Mavericks a few months ago.  Thank you, tbirdvet.  You have no idea how much easier you just made using my iMac again.
    Message was edited by: wadems

  • How to create the log file in remote system using log4j.

    Hi,
    How to create the log file in remote system using log4j. please give me a sample code or related links.The below example i used for create the log file in remote system but it return the below exception.Is there any authandication parameter for accessing the remote path? Please help.
    public class Logging
    Logger log=null;
    FileAppender fileapp=null;
    public Logging(String classname)
    try
    log = Logger.getLogger(classname);
    String path=" [\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt|file://\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt]";
    fileapp = new FileAppender(new PatternLayout("%r [%t] %-5p %c %x - %m%n"),path, true);
    log.addAppender(fileapp);
    log.info("Logger initilized");
    }catch(Exception ex)
    ex.printStackTrace();
    java.io.FileNotFoundException: \\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt (The network path was not found)
    at java.io.FileOutputStream.openAppend(Native Method)
    at java.io.FileOutputStream.<init>(Unknown Source)
    at java.io.FileOutputStream.<init>(Unknown Source)
    at org.apache.log4j.FileAppender.setFile(FileAppender.java:290)
    at org.apache.log4j.FileAppender.<init>(FileAppender.java:109)
    at annwyn.logger.BioCapLogger.<init>(Logging.java:23)
    at sun.applet.AppletPanel.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Please help.
    Thanks in advance.
    Saravanan.K

    Sorry path is missing for the above request.
    path="\\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt ";
    please help.
    Saravanan.K

  • How to know the logged in username in BLS?

    Hi MIIers
    i know i can use this session variable( ) in HTML to get the logged in user name.
    But how to get the logged in user name in BLS? Is it the same way ?
    ( I might be duplicate  post but we have to bare with it..search results didn't get me proper answer ..)
    Thanks
    Hari

    Hari,
    Use it as a transaction property and enable the autobind property of XacuteConnector.
    Regards,
    Ajay.

  • How to enable JCo logging

    I know I've seen this somewhere, but now that I need it, I can't find it.  I've spent two hours searching all the forums.  Can someone tell me how I enable JCo logging?  I have a JCO/Java program that works fine from the command line, but doesn't work when I try to use it in a Tomcat servlet.  None of the log files that I can find have any errors in them, but it appears that the call to JCO.createClient fails in the servlet.  I've read all of the posts about putting the JCo jar file in the servlet's lib directory and copying sapjcorfc.dll to Tomcat's bin directory, but no luck.  I'm hoping that there is some way that I can get JCo to give me a log that will indicate what is going wrong.  Thank you for your help.

    <b>SAP Note 723562</b>
    2. Runtime loading mechanism
    When an application references a JCo class for the first time it will be loaded by the associated class loader. During this process JCo's static initializer will be executed. This routine will search and load the JCo JNI library by using the following algorithm:
    1. Try to load the sapjcorfc library from the same directory where the sapjco.jar file or the JCo class files are located.
    2. Search the sapjcorfc library along the directory path defined in the java.library.path system property from left to right and if found load it from there.
                Note: If this property is not set manually, the JVM will usually set the OS specific library path environment variable as the default java.library.path system property at startup.
    1. Let the JVM handle the loading of the sapjcorfc library by delegating this task to its System.loadLibrary(String) method.
    JCo's JNI library is linked with the native RFC library. So when it is loaded the operating system will try to resolve its dependencies by loading the native RFC library, too. Usually, this will be done by searching for the first occurrence of the rfccm | librfc32 library along the directory path defined by the OS specific library path environment variable from left to right and load it.
    If the sapjcorfc library and/or the rfccm | librfc32 library cannot be loaded, you will get an ExceptionInInitializerError from the JCO. <clinit> method saying that it could not load the middleware layer com.sap.mw.jco.rfc.MiddlewareRFC. This error message may be caused for one of the following reasons:
    The sapjcorfc library cannot be found by using the above described algorithm, because you unintentionally installed it to the wrong directory or forgot to specify its directory in the OS specific library path environment variable or alternatively in the java.library.path system property.
    The rfccm | librfc32 library cannot be found because you unintentionally installed it to the wrong directory or forgot to specify its directory in the OS specific library path environment variable.
    The version of the sapjcorfc library found via the sapjco.jar directory or the java.library.path system property is not the required version (the version numbers and dates of the JCo middleware and the JCo library must be equal).
    The version of the rfccm | librfc32 library found via the OS specific library path environment variable is too old (for example you forgot to copy the librfc32.dll to the <WinDir>\system32 directory and an older version is loaded from there).
    The sapjcorfc library, the rfccm | librfc32 library or both lack the execute permission flag.
    The sapjcorfc library, the rfccm | librfc32 library or both do not have the same bit width as the JVM.
    The sapjcorfc library, the rfccm | librfc32 library or both were from a different JCo distribution and are not for use with your operating system and/or your hardware processor.
    The sapjcorfc library, the rfccm | librfc32 library or both require a higher operating system version.

  • How to enable the S-Video port on a Satelite M30X-154?

    Hey does any one know how to enable the S-Video port on a Satellite SM30X-154 laptop?
    If I press the FN+5 keys the only options I get is LCD and no S-VHS option. My TV is set up for it as I watch DVD's through the cable.
    When I connect the cable to the laptop, nothing happens!!
    HELP

    Hi,
    Sorry, my Tosh A100 has a Geforce 7600, I don't know what your GA is.
    But on mine I have a NVidia Control Panel, where I can configure dualview,
    which normally lets me choose between the builtin LCD and the extern monitor (VGA-Port).
    When a TV is connected and not recognized, I can enforce recognition there.
    On the next start of the panel, the TV is then available too.
    Perhaps I could help you.
    If not, note that with windows settings your TV will not be available.
    Try to go to the User Interface of your graphics adapter...
    Matz

  • How to enable the EL in jsp page

    hi can u tell 'how to enable the EL in jsp page'?

    *I am getting below exception in tomcat when i inclued +<%@ page isScriptingEnabled="true" isELEnabled="true"%>+*
    org.apache.jasper.JasperException: /index.jsp(1,1) Page directive has invalid attribute: isScriptingEnabled
         org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
         org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
         org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:198)
         org.apache.jasper.compiler.JspUtil.checkAttributes(JspUtil.java:311)
         org.apache.jasper.compiler.Validator$DirectiveVisitor.visit(Validator.java:106)
         org.apache.jasper.compiler.Node$PageDirective.accept(Node.java:590)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2338)
         org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2388)
         org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2394)
         org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2338)
         org.apache.jasper.compiler.Validator.validate(Validator.java:1700)
         org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
         org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)

  • How to Enable the SAVE button in the Menu Bar of the Invoice Document.

    Hi.
    How to Enable the SAVE button in the Menu Bar of the Invoice Document as it is disabled for me.
    I would like to save the Invoice document in PDF  format.
    Regards
    Irfan

    Hi,
    Normally, for the archiving or generation of the invoice document in PDF format is handled by maintaining the output records through VV31/VV32 with the relevant printer, storage mode ( 3- print and archive or 2- archive only ), no. of messages ( means no of copies ) in the communication method.
    Then when you click the print button through VF03 in the print options pop-up you get a print at the physical printer and at the same time an archived copy ( PDF copy ) attached with the document.
    So, please make sure the output records are fine to allow a PDF copy generated and then try to print and check in VF03 by entering into the billing document.
    Hope this helps you.
    However, from the print preview you normally would not be allowed to save or print.
    Regards,
    Ram
    Edited by: Ramakrishna Peri on Apr 3, 2009 9:16 AM

  • How to Enable the Oracle BPM Worklist?

    Hi!
    Newbie here.
    So how do you enable the Oracle BPM Worklist?
    Sure there a tutorial for this found in http://docs.oracle.com/cd/E21764_01/doc.1111/e17366/chapter16.htm#BABHCICI
    and in section "16.2 How to Enable the Oracle BPM Worklist" it says
    "By default, Oracle BPM Worklist functionality is disabled. You can enable this functionality in AIAConfigurationProperties.xml.
    To enable the Oracle BPM Worklist:
    -Access AIAConfigurationProperties.xml located in <AIA_HOME>/aia_instances/$INSTANCE_NAME/AIAMetaData/config.
    -Set the EH.INVOKE.HWF property value to true.
    -Reload updates to the AIAConfigurationProperties.xml file."
    However upon searching for the file "AIAConfigurationProperties.xml" or even the directory "aia_instances" in our servers, I could not find them. Please help me!

    If you are talking about 11g Worklist app, then you won't be able to do that, since the source code is not shipped with the product. The better way is to create the custom worklist application using the Worklist APIs. Refer to the SOA Developers Guide.
    In case of 10g, you can access the source code of Worklist app, even in that case, you can do your requirement using the exposed APIs.

  • How to enable the comment option in the pdf file

    Hi,
    How to enable the comment option in the pdf file using acrobat sdk[IAC, javascript],
    Give me idea on this to automate.
    If not leave it.
    Regards,
    jkrishnanvenkat

    jkrishnanvenkat,
    I can also do this from Acrobat Pro. Click Comments - Enable for Commentingand Analysis in Adobe Reader. This can not be done through the DSK or JavaScript.
    Gregory

  • How to download the log history for batch session?

    Anyone know how to download the log history from SM35?

    Hi ONG ,
    first u have to get the Q.ID , then u can use there Fms to get the Log of Sessions.
    CALL FUNCTION 'RSTS_OPEN_RLC'
      EXPORTING
        NAME         = LOG_NAME
        CLIENT       = LOG_CLIENT
        AUTHORITY    = 'BATCH'
        PROM         = 'I'
        RECTYP       = 'VNL    '
      EXCEPTIONS
        FB_CALL_HANDLE =  4
        FB_ERROR       =  8
        FB_RSTS_NOCONV = 12
        FB_RSTS_OTHER  = 16
        NO_OBJECT      = 20
        OTHERS         = 24.
    CALL FUNCTION 'RSTS_READ'
      TABLES
        DATATAB  = LOG_TABLE
      EXCEPTIONS
        FB_CALL_HANDLE =  4
        FB_ERROR       =  8
        FB_RSTS_NOCONV = 12
        FB_RSTS_OTHER  = 16
        OTHERS         = 16.
    CALL FUNCTION 'RSTS_CLOSE'
      EXCEPTIONS
        OTHERS = 4.
    <b>check the same steps how sap doing in SM35P</b>
    Regards
    Prabhu
    Message was edited by: Prabhu Peram

  • How to get the logged in userId value in adf task flow OIM11g R2

    Hi,
    I have created an adf task flow. Now I want to run some query in that based on the logged in userId.
    Could you please help me in knowing how to get the logged in userID value in adf TaskFlow so that I can run a parameterized query.
    Thanks

    3 different ways to retrieve the username (not sure what you mean by user ID) :
    http://mahmoudoracle.blogspot.be/2012/06/adf-get-current-logged-user-name.html#.USI_c-h8zIo
    Also provide your JDev version.
    Basicly, you should use the groovy expression in a view criteria (it's the fastest and easiest way) and call that view criteria whenever you need it.
    That's if you are using ADF BC of course.

  • How to enable the full list of developer options on A806?

    How to enable the full list of developer options
    Moderator note:Moved from http://forums.lenovo.com/t5/Lenovo-Android-based-Tablets/No-Animation-speed-options/td-p/1359241
    Edited & created a new thread.

    -Go to menu, settings,
    -about phone
    -scroll to the bottom and find "build number"
    -tap it 7 times (upon completion, it will say that you're a developer)
    -the menu is now near the bottom of the main settings menu (just above about phone)

  • How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific WebApplication or Sitecollection?

    How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
    Vishal Goyal

    Hi Vishal,
    I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
    look article on below link to enable developer dashboard on specific master pages
    https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    Let me know if this helps.
    Thanks
    Bhism 

Maybe you are looking for

  • Balance sheet customization

    Hi Frnds..   I can see the balance sheet(for India) using F.01 transaction. But my client is not satisified with the format given by us.  She needs it in a format where it shows expenses on one side & income on other side as a typical sheet that they

  • How do i make my payment with a money order

    how do i make my payment with a money order

  • "Please select another location to extract the installer to " ?????

    I had beeta version of the weblogic 6.0. I uninstalled the beta version. Removed all entries from the registry. Removed all the weblogic created directories. While i install the actual weblogic 6.0, the installer is giving this problem. "Please selec

  • How setting contentStyle in a external CSS File

    Hello, I want setting any contentStyle properties in an external css file. Something like: <af:selectOneChoice id="gotoPg" contentStyle="width:60px;" I tried this, but doesn't work: <af:selectOneChoice id="gotoPg" styleClass="classCss" Inside the ext

  • IPad not linking to correct Skype account

    I have a premium Skype account and just purchased a new iPad and downloaded the Skype app but it did not link to my premium account and I can't seem to correct this even when I log in with the correct user information.  I spent over 90 minutes on cha