How to enable the variant button in my report

Hi experts,
How can I enable the variant button at the top menu bar of my report?

Hi Miv,
In the above post of mine I didn't give info. on creating variant.
Here is how to create a variant:
On the Selection screen after giving INPUT. Just press ctrl+S.
to create a variant.Give the variant name and save it.

Reward all helpful answers
One request, i.e., don't forget to close the thread by giving points if your problem.
Regards,
V.raghavender.

Similar Messages

How to Enable the SAVE button in the Menu Bar of the Invoice Document.

Hi.
How to Enable the SAVE button in the Menu Bar of the Invoice Document as it is disabled for me.
I would like to save the Invoice document in PDF format.
Regards
Irfan

Hi,
Normally, for the archiving or generation of the invoice document in PDF format is handled by maintaining the output records through VV31/VV32 with the relevant printer, storage mode ( 3- print and archive or 2- archive only ), no. of messages ( means no of copies ) in the communication method.
Then when you click the print button through VF03 in the print options pop-up you get a print at the physical printer and at the same time an archived copy ( PDF copy ) attached with the document.
So, please make sure the output records are fine to allow a PDF copy generated and then try to print and check in VF03 by entering into the billing document.
Hope this helps you.
However, from the print preview you normally would not be allowed to save or print.
Regards,
Ram
Edited by: Ramakrishna Peri on Apr 3, 2009 9:16 AM

How to enable the Save button in ALV_GRID_DISPLAY function module

Dear experts,
                I Created a ALV report by using ALV_GRID_DISPLAY functional module ,i need to enable the SAVE button ,my reqirement is to trigger some event in save button, then if i created own PF status existing icon are hidden, mention in below screen shot.
suggest me
Thanks
sivashankar k

Hi sivashankar,
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
*   I_INTERFACE_CHECK              = ' '
*   I_BYPASSING_BUFFER             =
*   I_BUFFER_ACTIVE                = ' '
       i_callback_program             = sy-repid
       i_callback_pf_status_set       = 'SET_PF_STATUS'
        i_callback_user_command        = 'USER_COMMAND'
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
   SET PF-STATUS 'MENU'.
ENDFORM.
""Handle use action
FORM user_command USING r_ucomm     LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
   CASE r_ucomm.
    WHEN 'SAVE'.
   ENDCASE.
ENDFORM.
PF STATUS : MENU (copied STANDARD(gui status) from SAPLKKBL, do changes as per requirement)
Regards
Sreekanth

How to enable the add button in worksheet properties in OLAP

Hi
After Changing the time to Pacific, im able to manage the catalog..But still im not able to share any of my olap worksheets.
I have also granted the BISM and D40 objects from ' user_objects table ' to the user from whom im trying to share the report..
but in my OLAP report..the worksheet properties shows me the add priveleges button in a disabled form..pls can any body help me out..it is an urgent issue and cud'nt enable the add button..
please give some guidance...
Thank you,
S. Kokila

Hi,
Normally, for the archiving or generation of the invoice document in PDF format is handled by maintaining the output records through VV31/VV32 with the relevant printer, storage mode ( 3- print and archive or 2- archive only ), no. of messages ( means no of copies ) in the communication method.
Then when you click the print button through VF03 in the print options pop-up you get a print at the physical printer and at the same time an archived copy ( PDF copy ) attached with the document.
So, please make sure the output records are fine to allow a PDF copy generated and then try to print and check in VF03 by entering into the billing document.
Hope this helps you.
However, from the print preview you normally would not be allowed to save or print.
Regards,
Ram
Edited by: Ramakrishna Peri on Apr 3, 2009 9:16 AM

How to enable the "Cancel button" so you can stop a report while loading ...

I have seen that some reports have a Cancel button located just below "the loading ..".
How can I enable that button in MS Reporting service 2005?

The following mechanism responds to any of the following events: <Esc> key, Close icon ('x'), Cancel button
JavaScript part:
function popupClosedListener(event){
 var source = event.getSource();
 var popupId = source.getClientId();
 var params = {};
 params['popupId'] = popupId;
 var type = "serverPopupClosed";
 var immediate = true;
 AdfCustomEvent.queue(source, type, params, immediate);
}JSF part:
 <af:popup ....>
 <af:clientListener method="popupClosedListener"
 type="popupClosed"/>
 <af:serverListener type="serverPopupClosed"
 method="#{myBean.serverPopupClosedMetod}"/>
 </af:popup>Finally, Java part:
public void serverPopupClosedMetod(ClientEvent event){
}

How to enable the 'FIND' Button in Module Pool Screen. Logic please

Hi All,
   I am writing one Module Pool Program. I have one requirement like I have to put FIND, FIND+ buttons on different screens.
   I am able to do the code for normal FIND. According to my requirement I have to display one Popup when the user click on FIND button. Once he entered some value it should find all the records and all the fields and display the list of hits in another popup. This whole process should as same as in SE11 Transaction functionality.
   Example: SE11 ->Table Entries -> and click the FIND Button. I need the same functionality in my Program.
   Please let me know ASAP. If you provide some code sample it will be Great.
Thanks & Regards
Kiran

Hi
If you have just implemented the code for FIND I believe u need to add some little modifications for FIND+.
U need only to manage the position of the last found value, so u need to go on from that position for FIND+.
The position should have the two coordinates X (the position in the record) and Y (the number of the record):
- FOUND should start for postion = 0, 0
- FOUND+ should start for position = X, Y
Max

How do I enable the power button to hang up calls?

i don't know how to enable the power button to hang up phone calls. I would really appreciate the help.

You can't. Too many people would accidentally hang up on people, then they'd come here to complain about it.

UMX - Enabling the Remove button on User Role Management screen

Hi,
I tried looking everywhere on how to enable the Remove Button on the UMX Role Screen. Please advice me if anyone knows about this. Appreciate it.
Navigation
1 User Management Responsibility
2. Users tab -> look for any user -> click on update button on the search result
3. on the Roles tab , you will see a list of role assigned to the user , on the far right , there will be a Remove column with all the icon grey out. (How do i enable this???)

Laurent wrote:
Hi,
I tried looking everywhere on how to enable the Remove Button on the UMX Role Screen. Please advice me if anyone knows about this. Appreciate it.
Navigation
1 User Management Responsibility
2. Users tab -> look for any user -> click on update button on the search result
3. on the Roles tab , you will see a list of role assigned to the user , on the far right , there will be a Remove column with all the icon grey out. (How do i enable this???)You cannot remove a role and you will have to end-date it (click on the plus sign with the "Show" text > Set "Active To").
To revoke a role from the user, you must end-date the role. If the role is an inherited role, you can only remove it by removing the role from which it originates in the role inheritance hierarchy. You can view a role's inheritance hierarchy by clicking on the Show hyperlink next to the role.
Assigning Roles to or Revoking Roles from Users
http://docs.oracle.com/cd/E18727_01/doc.121/e12843/T156458T156460.htm#366082
Thanks,
Hussein

Control the *GO* button in interactive report

How to control the GO button in interactive report using dynamic action?
i have to press the GO button automatically using dynamic action when page item get focused.
Is it possible?
thanks and regard,
skud.

Hi skud,
Your dynamic action can capture the "Get Focus" event of your page item and then you could try creating a true action to submit the page with a specific request. Create a branch to a URL with the condition of request being equal to the one you specified before, and as target select URL and make use of the filtering of an IR by URL when linking. This is just an idea, hope you can get the result you need.
Regards,
Sergio

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :(

How do I enable the bookmarks button in Fennec?

Every screen shot of Fennec I find has a bookmarks button to the left of the address bar, but I've installed it on my Nexus One, and while I can add bookmarks, I can't view them. How do you enable the bookmark button on Fennec?
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

Fennec support is over here:
http://mobile.support.mozilla.com/en-US/kb/

How to enable the "update file" button to update the data template

We have an escalated customer bug that the chinese character does not display correctly on report. We want to update the data template xml file on customer site to test the fix. However, when the customer login using "XML publisher Administrator" responsitility, select function "Data Definitions", search and then update the definition, on the update page, the button "update file" next to "Data Template" is disabled. Anyone know how to enable the button?
screenshot at:
ftp://bugftp.oraclecorp.com/upload/bug6649637/CannotUpdate.doc
Thanks,
Wei

Unless until it is a Manual Journal, SLA page doesn't give you the provision to change them.
Even for Manual Journal, it won't allow you to change, if that is transferred to GL.
Only option is to UNDO the accounting and correct the setup to create correct journals. You may contact Oracle Support.
By
Vamsi

How to enable the print & archive button that appear in the smartform outpu

How to enable the print & archive button that appear in the smartform output.....

Hi,
I agree with the details which has been given above, but still if you want to default option 3 "Print & Archive" in drop down, it is possible.
All you need to do is to set the value of output_options structure field "TDARMOD" as "3" while passing the parameters to dynamic function module of smartform.
That will select "Print and Archive" in background and display to user.
Sumit

HOW TO MAKE THE SAVE BUTTON IN GREY MODE IN QA32 INTIAL SCREEN

Dear friends,
How to make the save button , in the tcode QA32 intial screen in GREY MODE.
As i don't want the screen variant created by me should not be seen by the user.

Hi
There is one option ,You can protect yor varient but not hide it.
To protect>QA32>Mydefault>Varient Attibute>click on protect varient.
If you select the field Protect variant, the variant can only be changed by the person who created it or last changed it.
I hope this can be one of the solution
Regards
Sujit

How to enable the submit data is smart view?

how to enable the submit data in smart view? i entered the data and select the row and column
i connection is ok...
please hlep me out

hi
I have two sheets one sheet1 and sheet2. inthe sheet1 is i entered the data and reflected in sheet2 through scripts (given below)
HsSetValue(('Sheet3'!D3*1000),$D$1,""&$C$2&""&$D$2&";"&$C$3&""&$D$3&";"&$A$7&""&C$7&";"&$F$3&""&$G$3&";"&$I$1&""&$J$1&";"&$I$2&""&$J$2&";"&$A$6&""&$B$6&";"&$I$3&""&$J$3&";"&$A$1&""&$B$1&";"&$A$8&""&$A9&";"&$F$1&""&$G$1&";"&$F$2&""&$G$2&"")
then the submit data button is disable....
any idea of this to sove the issues i checked the shared service i am entering in admin access.. excel versions is 2002 and hyperion system 9 v
please help me out

How to enable the variant button in my report

Similar Messages

Maybe you are looking for