How to enable viewing of payload for receiver RFC adapter in RWB

HI All,
We can see the payload of all adapters in RWB by clicking on the message link under component >> adapter monitoirng. However when i click on message link for receiver RFC adapter, it does not show any payload. How can I enable this payload?
Regards

Hey
Sync messages are Cached rather than persisted in RWB to save memory.
You need to change the following parameter in Visual admin to see sync messages in RWB
Service SAP XI AF Messaging:
messaging.syncMessageRemover.removeBody = false
its set to True by default hence it does not stores the messages.
You may have to restart the Java stack after the changes (but first try without restarting the Java stack).
Thanks
Aamir
Pl:You will see the sync messages in Message Monitoring in RWB (not sure if it will show up in Communication channel monitoring as well)

Similar Messages

How to use XML Anonymizer Module for receiver mail Adapter?

Hi All,
I would like to know how to use XML Anonymizer Module for receiver mail adapter so as to change the namespace to http://sap.com/xi/XI/Mail/30 from my original namespace? Thank you all in advance?

Hi,
This may help u:
Replacing one namespace with another using XML Anonymizer Module
Thanks
Amit

Dynamic User for Receiver RFC adapter

Hi,
I have a soap to rfc scenario. Any solution to use PI login user as RFC user to connect SAP backend?
Thanks

YOu might want to know about the concept of principal propagation.
http://help.sap.com/saphelp_nw04/helpdata/en/45/0f16bef65c7249e10000000a155369/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/808d3048-638c-2a10-35a6-faa48e50ad59
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1a65a5a7-0d01-0010-1b9d-df02d5666791
Regards,
Ravi

Dynamic File Name for Receiver File Adapter

Hi All,
How can we use dynamic name for Receiver file adapter?
Can anyone help.
Thanks in Advance
Chemmanz

Hi Chemmanz,
The dynamic filename generation concept is as follows.
In your filename field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Regards,
Bhavesh

Receiver RFC Adapter

Hi All,
I am getting this error in communication channel monitoring for receiver RFC Adapter.
Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling Z_CRM_LEAD_CREATEMULTI in remote system (RfcClient[S10440_RFC_CallOutComes_Out]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Illegal move of the field symbol of a LOOP ... ASSIGNING.
Have gone through lots of links on SDN but not able to solve it out.
Any inputs will be greatly appreciated.
Thanks,
Venkat

Hi,
this one seems pretty simple
>>illegal move of the field symbol of a LOOP ... ASSIGNING.
this suggests that your error is inside FM Z_CRM_LEAD_CREATEMULTI
so correct the code (probably the table you try to loop is empty)
and try once more
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder
Regards,
John

Hi,
Please try to setting Folder Permissions on Web Publish, and then deploy it with Web Deploy, as far as I know, if we do that, Web Deploy will use the SetAcl operation to change permissions. Please have a look at the article below.
#http://sedodream.com/2011/11/08/settingfolderpermissionsonwebpublish.aspx
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to enable file size 2GB for linux RHEL4.0

Hi
I am on oracle 9.2.0.6 on linux RHEL 4.0. How do i enable large file size for filesystems.
When i query ulimit -a ulimit -f it is returning me unlimited.
But my database listener crashed as listener log file reached 2gb in size.
I couldnt find how to enable the largefile size for the filesystem.
Thanks
SV

Are you sure that the filesystem is limiting your listener log file size?
Please try to concatenate some lines into the logfile and see if the filesystem prevents it. I expect you to find out that the limit is only with the listener.
In any case, run a weekly/monthly job that creates an empty log file.
If the problem is with ext3 then you should check with someone more experienced because it does not sound to me like the proper (or default) behavior of ext3.

HOW to enable oracle advance compression for EXIST partitioned table

Hi All,
I have to enable oracle advance compression for existing table which PARTITION BY RANGE then SUBPARTITION BY HASH.
ORacle version: 11.2.0.2.0
Please provide me any relevant doc or any exp.
Thanks in advance.

could not see any text for how to enable oracle advance compression for EXIST partitioned table.RTFM.
From the resource above:
How do I compress an existing table?
There are multiple options available to compress existing tables. For offline compression, one could use ALTER TABLE Table_Name MOVE COMPRESS statement. A compressed copy of an existing table can be created by using CREATE TABLE Table_Name COMPRESS FOR ALL OPERATIONS AS SELECT *. For online compression, Oracle’s online redefinition utility can be used. More details for online redefinition are available here.
"

How to enable OHS compression/cache for OBIEE

Hi i have installed OHS (11.1.1.7) and webcache on OBIEE 11.1.1.7. Does any one know how to enable/configure compression/cache for OBIEE analytics? Also how to validate if compression is working?

Hi Anke,
all tables that have been created in V9.7 with attribute COMPRESS YES will be compressed statically .
db2 " select count(*) , rowcompmode from syscat.tables group by rowcompmode "
After the upgrade to 10.5 all tables created with attribute COMPRESS YES will get rowcompmode='A' but old tables created with V9.7 will stay with rowcompmode='S' .
You can change tables from rowcompmode='S' to rowcompmode='A' via ALTER TABLE . After this all new pages or old pages that are touched will be adaptively compressed. But old pages that are not touched will only be static compressed. To get all pages of an existinbg table adaptive compressed you need to move data. For example with DB6CONV.
Regards
Frank

HT3986 Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard? Many Thanks

Hi All
Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard - the standard wired apple keyboard works fine via this key but not the new wireless keyboard?
Many Thanks

Holy crap, this fixes the issue. At least temporarily it has. I should add that my issue was single finger forward/back swipe stopped working on the magic mouse in Firefox since Mavericks came along. I have been fighting this since I upgraded to Mavericks a few months ago. Thank you, tbirdvet. You have no idea how much easier you just made using my iMac again.
Message was edited by: wadems

Adapter Module for receiver IDOC adapter?

Hi,
I have a scenario where i need to do some custom logging in the receiver adapters. For all receiver file adapters, i have written an adapter module which fulfills this custom requirement but how will i do this in the receiver IDOC adapter as its on the ABAP stack? I cannot write a java adapter module for this.
Is there anyway by which i can write a ABAP adapter mosule and deploy it in the IDOC adapter? Or any other way to achive it. the scenario is such that i need to do the logging before the idoc is posted into R/3 system by the idoc adapter.
Please advice.
Regards,
Yash

Hi Chirag,
Yes i have seen that the module tab is disabled for idoc adapter. I have a fin interface where i need to split a incoming file into an idoc and a file. For this purpose i need to log how many records are received by each adapter and the sum of the line items for audit perspose.
any othr way to do it apart from doing it in message mapping. The req is to do in the adapter engine.

Idoc packaging for Receiver Idoc adapter in 7.11

We are using PI 7.11. And, I have a File to Idoc scenario. I am trying to find an Idoc packaging option for Receiver Idoc adapter. Any suggestions on how to do configure thi scenario?
Thanks
abhinaya4321
Edited by: abhinaya4321 on Dec 3, 2011 12:15 PM

hi,
We are using PI 7.11. And, I have a File to Idoc scenario. I am trying to find an Idoc packaging option for Receiver Idoc adapter. Any suggestions on how to do configure ?
that is possible with message packaging concept it is suitable for you requirement
go through below links:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10b54994-f569-2a10-ad8f-cf5c68a9447c.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10b54994-f569-2a10-ad8f-cf5c68a9447c?QuickLink=index&overridelayout=true
thanks,

How to increase the waiting time for response in Adapter Engine not in IE

Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.

Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

Structure for Receiver Jdbc adapter for multiple tables

Hi,
For Receiver JDBC adapter,Standard structure
structure as
Statement
   Tablename(TABLE1)
        Action
        Access
Can i make a structure like
Statement
     Tablename(TABLE1)
        Action
        Access
            fields....
     Tablename(TABLE2)
        Action
        Access
            fields......
As i am using tables and I want to insert or update both of them or one based on some conditions.
Will Insert be possible in single Statement or I have to create separate statements for each table. Can you please help me on this?
Thanks in advance
Best Regards,
Harleen Kaur Chadha

Hi Harleen,
        As already said by Dharanveer, all that you need to do is replicate the Statement level, so, istead of using this structure:
Statement
Tablename(TABLE1)
   Action
   Access
     fields....
Tablename(TABLE2)
   Action
   Access
     fields......
        You will construct something like this:
Statement1
Tablename(TABLE1)
   Action
   Access
     fields....
Statement2
Tablename(TABLE2)
   Action
   Access
     fields......
       And this structure will be created in a single Data Type, that will be used to create a single Message Type, that you will use in your Message Mapping, and, the 2(or more tables that you need to manipulate) will be inserted/updated without problems using this approach.
       Thank you, and best regards,
       Wilson

Receiver RFC Adapter -Advance Mode option

Hi Experts
I want Execute the commite transaction after Trigeering the Standred BAPI through XI.
We haveAdvance Mode option in Reciver RFC Adapter . Any one explain me how to implment this.
Regards
Upendra.V
Edited by: upendra v on Jan 26, 2009 1:47 PM

Hmmmm.. I guess you are just practising & exploring all the featers of RFC.. isn't it?
Anyway upto what I know is here..
>If you want to use this communication channel to call BAPIs as remote-enabled function modules that change data in the database, set the indicator.
First of all you need to write an ABAP program in R3, there you will call your RFC/BAPI to update the database entries.
In XI, under your receiver RFC adapter check the box "Commit Handiling for Single BAPI Calls". Once you click you will get another check box called "BAPI Advanced Mode".
>If executed successfully, the transaction is written to the database by calling the function module BAPI_TRANSACTION_COMMIT explicitly. If an error occurs, the transaction is rolled back by BAPI_TRANSACTION_ROLLBACK.
Once you send the data from XI to R3, then in R3 function module BAPI_TRANSACTION_COMMIT will be called explicitly (you need to define/call this BAPI after the ABAP code for database update). This will commit the work and return the result success or failur in a parameter called RETURN.
And after this BAPI you should call BAPI_TRANSACTION_ROLLBACK, so that in case of errors the transaction will be rolled back.
>The result is determined by the value of the field TYPE in parameter RETURN. If successful, the tables are empty and the values u201Cu201D, u201CSu201D, u201CIu201D, and u201CWu201D are displayed. All other values are regarded as errors.
As described above.
>To change this setting, set the indicator BAPI Advanced Mode.
In the Successful RETURN-TYPE Values table, enter the values that should lead to a successful execution.
Once you check the box "BAPI Advanced Mode" a table will appear, there you can write your own values e.g.u201Cu201D, u201CSu201D, u201CIu201D, and u201CWu201D.
I can not provide a better solution then this... you have to do a work around, but above are the basic steps which can be considered before implementing the solution.
Regards,
Sarvesh

How to enable viewing of payload for receiver RFC adapter in RWB

Similar Messages

Maybe you are looking for