Dynamic File Name for Receiver File Adapter

Hi All,
How can we use dynamic name for Receiver file adapter?
Can anyone help.
Thanks in Advance
Chemmanz

Hi Chemmanz,
The dynamic filename generation concept is as follows.
In your filename field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Regards,
Bhavesh

Similar Messages

How to give a dynamic File Name for Receiver File/FTP Adapter.

Hi Experts,
    I have one scenario in which we are creating a flat file of IDOC which is coming from R/3 & sending it to FTP location. For this we have configured Receiver FTP adapter with File Name Scheme as "NT.out" & in File Consturction mode i have given as "Add Time Stamp".
    therfore while creating a file it is creating as NTyyyyMMdd-HHmmss-SSS.out
where as my requirement is only to to add Time & not the Date. (NThhmmss.out)
    How to do this ?
    for your info we are using ABAP Mapping.
    Pl help me
Regards,
Umesh

Hi Umesh,
      Add one more field to your target structure for your file name and populate that field as per your requirement like NTyyyyMMdd.out. In receiver communication channel use Variable subtiution option and give the refrence of Payload and file construction mode set as create.
And refer the below weblogs for Variable Subtiutuion File Name Scheme
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
Hope this way would be solve u r problem.
Cheers
Veera
>>>Reward points, if it is needful

Error dynamic File Name in Receiver File Adapter

Hi all,
Dynamic file name for Receiver file Adapter Problem
my multi mapping look like this in design mode
messages
     message1
          SD01_E
               FileName
               row
     message2
          SD02_E
               FileName
               row
by processing the xml look like this:
<ns2:SD01_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
or
<ns2:SD02_E xmlns:ns2="urn:lsv.de/SAP/XXX">
<FileName>L40SA939.xiConstant</FileName>
- <row>
in file receivere adapter i have try this but it dos not work
payload:SD01_E,1,FileName,1
Error:com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 0(:main:, row:1, col:0)
is there any way to have access to Filename in different root elements??
regards
Ralf

Hi Ralf,
i think, you need for each XML msg (each different root element) a new adapter -> a new IF determination, new rec agreement and a new channel.
Regards,
Udo

Payload as File name at Receiver File Adapter

Hi All,
I have a requirement for a PROXY to File Scenario where Receiver files has to be named dynamically with a value from the Payload that I get. Also the particular field that has the file name should be unmapped with the Receiver.
For Example,
   <row>
      <Name>Alex</Name>
      <DOB>27062014</DOB>
      <City>Delhi</City>
   </row>
If this is the Payload I get, I want the Receiver file name to be "27062014.txt". At the same time this particular field should not be mapped at the Receiver end.
I have tried a few links which confuse me further.Kindly help me,
Thanks in advance,
Sree Ram

Hi Sree,
Please check if the case is correct. refer the below discussion
Problem in variable substitution
reference blog for variable substitution
Variable Substitution for Directory or File name.
regards,
Harish

Unique file name for saving file on server.

Hi
I am having a servlet which will be used to save a file from client machine to server.
Now, this servlet can be used with multiple users through web at same time.
All user will be uploading files.
There will be cases where 2 users from different location will upload files with same name.
Thus, it is important for me that I append some string in uploaded file name, so that file name stands unique.
How can I get this unique number.
Is there no instance number for generated class !!.
Thanks

A few years ago I found this code on the Internet. I have forgotten where, but I'ven been using it since then and until now it always generate the unique number.
      * Generates unique ID based on timestamp, thread ID, random seed and random
      * double. Each part is converted to hexadecimal, padded left with zeros to
      * a length of 8 chars and then concatentated to each other.
      * @return Unique 32-char hexadecimal string.
     public static synchronized String getUniqueID() {
          final String pad = "0";
          final int padLength = 8;
          final int padDirection = StringX.PAD_LEFT;
          String timestamp = Integer.toHexString(Long.valueOf(System
                    .currentTimeMillis()).intValue());
          String threadHashCode = Integer.toHexString(Thread.currentThread()
                    .hashCode());
          String randomInt = Integer.toHexString(RANDOM.nextInt());
          String mathRandom = Integer.toHexString(new Double(Math.random()
                    * Integer.MAX_VALUE).intValue());
          // You may remove this try block if you want to increase performance by
          // 1ms.
          // But the generated ID might not be fully 100% guaranteed to be unique.
          // If you want to keep this block, then you can "almost" safely remove
          // the
          // randomInt and mathRandom parts of the UniqueID.
          try {
               Thread.currentThread().join(1); // System.currentTimeMillis()++
          } catch (InterruptedException e) {
               // Do nothing. However very, very, very rare. Haven't seen it
               // earlier.
          return StringX.pad(timestamp, pad, padLength, padDirection)
                    + StringX.pad(threadHashCode, pad, padLength, padDirection)
                    + StringX.pad(randomInt, pad, padLength, padDirection)
                    + StringX.pad(mathRandom, pad, padLength, padDirection);
     }

Dynamic File name in Receiver File adapter

Hi,
My Scenario is Proxy to File.
I must create filename dynamically in the receiver file adapter by taking the sales order number and divison from the source.
How can i create a dynamic filename? i searched the forum, but i could not get the correct answer,
Please help me out.
Regards
Srinivas

Hi Srinivas,
> My Scenario is Proxy to File.
> I must create filename dynamically in the receiver file adapter by taking the sales order number and divison from the source.
public String targetFileName(String Sono, String Div, Container container) throws StreamTransformationException
DynamicConfiguration conf = (DynamicConfiguration)container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String MyFileName = sono + div + "<filename>"+".xml";
conf.put(key, MyFileName);
return MyFileName;
File name you can format according to your requirement.
And one more thing for this you have to specify the ASMA properties. For this check the below link step-1 and step-2.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards
Ramesh

Setting dynamic file name in Receiver file adapter - not from payload

Guys I just remember reading a weblog but can't find it now that I need it, on how to set the file name in message mapping dynamically but not using any payload field.
Please let me know if you remember this.
Thanks a lot,
Viktor Varga

also u can check in
<a href="/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II</a>
<a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14: The same filename from a sender to a receiver file adapter - SP14</a>

Variable substitution not working for dynamic file name in Receiver File CC

Hi Experts,
I am doing the scenario of Proxy sender to File receiver and my purpose is to Create the text file
as per the filename available in Source Message payload.
I am using the Variable Substitution method for this as shown below.
Source Message Structure:-
     <Row>            -
having Cocurence 1.1
         <Filename>     -
having Cocurence 1.1
         <Item>            -
having Cocurence 1.Unbounded
          <Field1>
          <field2>
         <Item>
         <Item>
          <Field1>
          <field2>
            <Item>
     <Row>
Target structure is same as the source structure and i have mapped the Filename field of the Source
with the Target structure Filename.
In ID the following is the File receiver CC Configuration.
File Name Scheme:- %Dyn_filename%
In Advance tab, I have selected the Enable option and added one row as Variable name %Dyn_filename%
and Reference as payload:Row,1,Filename,1
In testing I am getting the Error as 'variable Dyn_filename is not found in Message payload'.
Please suggest me.
Regards,
Jagesh

Hi Pooja,
Hi Pooja,
Thanks for your valuable reply..
I tried with the same. but still Filename is appearing in Output file.Giving you some details regarding my Receiver File Configuration settings.
Target Message Type:-
          <MT_Target_Struct>
                <Row>----
1.1 occurence
                        <Filename_test>----
1.1 occurence
                        <ITEM>----
1.unbounded occurence
                              <Field1>
                              <Field2>
                        <ITEM>
                        <ITEM>
                              <Field1>
                              <Field2>
                        <ITEM>
                <Row>
          <MT_Target_Struct>
Recordset structure:- Row,Filename_test,ITEM
Row.fieldSeparator----
>'nl'
Filename_test.fieldFixedLengths----
>0 (Zero)
Filename_test.fixedLengthTooShortHandling----
>Cut
ITEM.fieldSeparator----
>,
ITEM.endSeparator----
>'nl'
I want only ITEM node to be written in the output file.
Please suggest.
Regards,
Jagesh

Dynamic directory name in Receiving File adapter

Hi,
In File to File senario, In receiving system i want to create directory name dynamically. In my mapping there is a field called name, the directory name in the receiving system will be value in the name field. Any one can help me how to do this one...
Thanks
Rao

Hello,
Please follow the below to achieve the same.
input - Store number,
UDF
String dynaname = input;
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION );
DynamicConfigurationKey key = DynamicConfigurationKey.create(
"http://sap.com/xi/XI/System/File","FileName");
conf.put(key,dynaname);
return "";
UDF mapping
Source[input] -
> UDF --> Rootnode of target structure.
Hope it helps.
best regards,
raj.

How to keep same sender file name for receiver mail attachement

Hi,
i am working with File to Mail scanario. There i want to pick a flat file from native file system and then send it as email attachment. Now i am able to send the file but the flat is getting converted as an xml file. is there any method to keep the same sender file name and type for receiver mail attachment. i am not using any mail package. i am using XI payload and keep attachments.
Thanks in advance.
-Siva

Hi,
Yes,With out using the mail package u can send the Mail Attachments to the receiver side,
In that case no need of Integration Repository objects.
Chck this links.
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
/people/community.user/blog/2006/09/07/email-reporting
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
If u dont get ur requirement then let me know ur Mail id i will send u a Doc.
Regards,
Phani
Reward points if Helpful

Dynamic attachment name in receiver mail adapter for 1 attachment?

Hi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
Dirk

Hi,
seems to be a tricky thing....
The sender interface (file) picks up an xml file and a pdf document.
The receiver wants to get the xml file as a txt file and the pdf, both sent together by mail.
We are following this thread:
"Sending multiple attachments winthin a single Receiver Mail adapter in required format".
So far we are able to generate the txt file and send it together with the pdf to the recipient.
The txt file gets its name from the payload of the xml file.
Unfortunately the pdf should be renamed to the same name as the txt file.
And here we are stuck.
We generate the filename for the txt file in the mapping to the mail message (as usual ximail30.xsd).
But for the pdf we are only able to set a static name in the channel module page using
Transform.ContentDisposition.
Any ideas how to solve this are really welcome!!!!
(Solutions that do not talk about using a new module to be written are prefered.)
Regards
Dirk

How can i get message id as file name in Receiver Mail Adapter

Hi All,
We are working on file to mail scenario. Client requirement is " Attached file name should be the message id" How can we achieve this.
Thanks & Regards,
Purshothamm

Hi,
To have the file name as message id, I think the below blogs can help you
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
Regards,
Vijay N

Dynamically generating file names for 2 File ( 1: 2 mapping transformation)

Hi ,
I have a scenario Proxy to File(FCC) with 1:2 transformation in message mapping ie 1 sender and 2 receiver interface ....
1 Message mapping
1 Operation mapping
1 RD , 1 ID and 2 file receiver channels and 2 receiver agreements.
I need to dynamically generate the filename say abc.(first 9 characters of mesg id) and xyz.(first 9 characters of mesg id)
I used dynamic configurations with ASMA settings, created 2 UDF assigned each of these to header node of r receiver message types.
Here, I guess the second dynamic configuration is over writing the first dynamic configuration and hence creating only one file with xyz.(first 9 characters of mesg id)
name .
Need your valuable inputs
Thanks and regards,
Pavithra

As dynamic configuration doesnot work in case of 1:n mapping what you need to do is
Create a field Filename in your source data structure
Create a1:1 mapping between your source structure and source structure
In that 1:1 mapping on the target structure assign UDF for file name
Now this target structure will be used as a source structure in your next 1:2 mapping
Under operation mapping add first the 1:1 mapping for source and then the multimapping
regards
Ninad

Renaming attachment file name in receiver mail adapter

Experts,
I have a file to mail scenario where an xml file is picked up and transformed into the target format in XI which has to be sent as an attachement in an email on the receiver side.
I am getting the mail with the attachement. But I would like to rename the attachment as the name of the picked up file.
I am using Adapter specific message attributes on both sides but the attachment is named as untitled.xml.
Please advise. Can this be achieved by using the swap bean or the message transform bean?
Regards,
Shobhit

Hi Shobhit,
The module tab of your mail adapter will look like this.
Processing Sequence
Module Name                                                            Type                                      Module Key
localejbs/AF_Modules/MessageTransformBean   rename LocalEnterpriseBean
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail     Local EnterpriseBean
Module Configuration
   Module Key               Parameter Name             Parameter Value
      rename      Transform.ContentDescription                      File
      rename Transform.ContentDescription attachement;filename="yourfilename.ext"
      rename            Transform.ContentType                 application/text;name="yourfilename.ext"
Thanks
Amitanshu

Counter in file name in receiver file adapter

Hi,
I am using FTP, my requirement is to add counter in the file name i.e XYZ001.
And added to this i can increment the counter till XYZ020, after this i am supposed to start again from XYZ001.It will be some how handled that when i place XYZ001 for the second time , it will not overwrite the earlier one as it will be proccess by that time.
I could have used addcounter but it doesnt work for FTP:(...also have seen /people/shabarish.vijayakumar/blog/2009/10/05/pixi-maintaining-sequence-numbers-in-file-name-scheme
Do we have any new feature added in PI 7.1 for handling this.
Regards,
Abhi

thanks shabz..
Request you to please let me know how to proceed with the first option which you have mentioned i.e,how to create tables and will i be able to start the counter again from xyz001 once i reach xyz020? is there any abap code to be written (wiil be asking SAP counterpart ) or we need to do it in the dynamic configuration udf? Please let me know how to do the same.
1. Maintain a table in SAP. Use/Code a RFC call to look up the sequence number from this table, incrementing the value after it is read. The result is then used in a dynamic configuration code, and the file name can be generated at that point.
Will this impact performance ?..mine is a credit card authentication interface and response time is imp...
Regards,
Abhi

Dynamic File Name for Receiver File Adapter

Similar Messages

Maybe you are looking for