How to : enumerate mounted vhd's, mount non-system vhd to ntfs folder?

Hi,
I need to enumerate all mounted VHD's and mount VHD into ntfs folder.
I've tried DISM, but it requires VHD with system volume ( i guess \windows folder ) but mine dont have one (and its not an option in my case).
DiskUtils seems lack of this functionality.
Any ideas?
Thanks)

after search i found the links:
https://msdn.microsoft.com/en-us/library/windows/desktop/hh824731.aspx
https://msdn.microsoft.com/en-us/library/dn269511.aspx
https://discutils.codeplex.com/
https://discutils.codeplex.com/discussions?size=2147483647
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Similar Messages

How does one mount a VESA mount on a iMac 27"

How does one install a VESA mount on a 27" iMac and how long does it take to install it on the computer?

den.thed,
Thank you. I have 22 of these to mount on articulated arms and I had no idea of how long it would take to remove the leg and put the bracket on. Like almost everything Apple, they make it fairly simple.

IMac intel core, 10.6.8 - isn't mounting my partioned iomega drive. How do i get it to mount and stay mounted?

iMac intel core, 10.6.8 - isn't mounting my partitioned iomega drive. It was mounting one of the partitions, but not the other one for a while. Then they both stopped showing up. I can not select the drive in Time Machine. I verified and repaired the iMac hard drive with Disk Utility. Then tried to verify and repair iomega drive in Disk Utility. It appears briefly but then disappears. One partition might be bad, what do i do? Then name of the partition changed to something like disk1:3 when it was called MAC. I want to see what's on it and ideally continue to use it as our backup in Time Machine. How do I get it to mount and stay mounted?

The usage figure reported by the activity monitor is likely to include only the core progam, the APIs that are being called and space for variables. FCP moves huge amounts of data around the system but, in general, I would imagine these are handled by the OS so would not (except maybe momentarily) be included in the acitivity monitor total.
If you have very little memory and it "runs out" so to speak, the OS will start swapping files on and off the disc which will slow the system down to a crawl if you have a standard hard drive. So with 16GB you have loads of room for the data transfers to take place quickly and efficiently. So, I would say you had not wasted your money! A very wise investment.

Can't mount oracle database on linux system

This is same as previous posting just added
e-mail and username info fo forum posting.
I am not able to mount an Oracle database.
I am new to Oracle and am working on an Oracle8i installation on an
Intel Linux Suse 6.3 platform. I am using only one harddrive and am
not using the 4 mount points as mentioned for efficiecy purposes in
the Oracle documentation..I am using the installation cd from Oracle8i
for Linux Starter Kit by Oracle Press. If anyone has this book they
can refer to pages 41-44 for the examples I followed.
As sysdba in sqplplus using the STARTUP command I can not Mount the
database -step 2 of the 3 stage process (Start, Mount and Open the
database) of opening an Oracle database.
I show the errors I encountered when I did the first 2 of the 3 steps
in the step-by-step mode (STARTUP NOMOUNT pfile=, ALTER DATABASE
MOUNT) in the sqlplus session and alert log respectively with startup
nomount and alter database mount for this sqlplus session.
Additionally I show the init.ora file lines referring to control file
which seem to be referred to by the sqlplus error messages and the
alert.log file. Perhaps some can give me some advice as what I can try
to fix this problem.
At the end of this e-mail I added several questions I had in regard to the control
files. Any help is appreciated.
Well, here are the sqlplus session results and its alert.log file:
Oracle sqlplus session usr/oracle as sysdba
oracle@CHESTNUT:~ > sqlplus
SQL*Plus: Release 8.1.6.0.0 - Production on Mon Mar 19 20:47:49 2001
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: usr/oracle as sysdba
Connected to an idle instance.
SQL> startup nomount pfile=/usr/oracle/dbs/init.ora ;
ORACLE instance started.
Total System Global Area 24989680 bytes
Fixed Size 69616 bytes
Variable Size 24637440 bytes
Database Buffers 204800 bytes
Redo Buffers 77824 bytes
SQL> alter database mount ;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying controlfile, check alert log for more
info
SQL> shutdown immediate ;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> exit
Disconnected
oracle@CHESTNUT:~ >
alert.log file for above session
Mon Mar 19 20:48:38 2001
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
LICENSE_MAX_USERS = 0
Starting up ORACLE RDBMS Version: 8.1.6.1.0.
System parameters with non-default values:
processes = 50
shared_pool_size = 3500000
control_files = ora_control1, ora_control2
db_block_buffers = 100
log_buffer = 32768
log_checkpoint_interval = 10000
db_files = 80
db_file_multiblock_read_count= 8
global_names = TRUE
db_name = DEFAULT
parallel_max_servers = 5
max_dump_file_size = 10240
PMON started with pid=2
Load Indicator not supported by OS !
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Mon Mar 19 20:48:58 2001
alter database mount
Mon Mar 19 20:48:58 2001
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Mar 19 20:49:01 2001
ORA-205 signalled during: alter database mount
Mon Mar 19 20:49:12 2001
Shutting down instance (immediate)
License high water mark = 1
Mon Mar 19 20:49:12 2001
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
archiving is disabled
init.ora control files
# define two control files by default
control_files = (ora_control1, ora_control2)
Here are my control file questions:
I need to know several points:
1) What are control files susposed to
contain and how would I recognize them?
I used the
unix find /usr/oracle \*ctl* -print
command to locate files with a ctl extension.
This resulted in about a dozen such files in
different directories as shown below:
./bin/lsnrctl
./bin/extractlib
./bin/agtctl
./bin/oidctl
./bin/lsnrctl0
./bin/agtctlO
./rdbms/demo/ulcase1.ctl
./rdbms/demo/ulcase10.ctl
./rdbms/demo/ulcase2.ctl
./rdbms/demo/ulcase3.ctl
./rdbms/demo/ulcase4.ctl
./rdbms/demo/ulcase5.ctl
./rdbms/demo/ulcase6.ctl
./rdbms/demo/ulcase7.ctl
./rdbms/demo/ulcase8.ctl
./rdbms/demo/ulcase9.ctl
./ldap/load/dn.ctl
./ldap/load/attr_store.ctl
./ord/ts/demo/tsquick/tsquick.ctl
./ord/ts/demo/usageutl/utildat.ctl
./ord/ts/demo/usage/stockdat.ctl
./ord/ts/demo/usage/stockinc.ctl
./ord/ts/demo/retrofit/sales.ctl
./ord/ts/demo/retrofit/sales2.ctl
./ord/ts/demo/applet/indexdemo.ctl
./javavm/admin/libjox8com_sun_jndi_ldap_ctl.so
./md/demo/examples/migctl.h
./md/demo/examples/migctl.c
2) On page 100 in the book Oracle 8i A Beginners's
by Oracle Press mention is made of a
CREATE CONTROLFILE command that can under
circumstances be used to re-create a control-file.
but that is all that is said about it. Perhaps
you might know something more about it.
3) Would you recommend any good text for
Oracle DBA's, especially for the problem of the sort
that I am encountering?
[email protected]
null

It's probably not supported on RHEL5/Centos5/etc., but...
You can get the installer to function using the following steps:
- extract the cal_linux_*.tar.gz, and cd into the OracleCalendar_inst directory
In there is the actual installer, cal_linux.
- the cal_linux is shell script wrapped around some binary blobs. The installer's
problem is that Oracle is setting the LD_ASSUME_KERNEL=2.2.5 environment
variable, which is a mistake on RHEL5. You need to make it not set that variable,
but you need to do so in a way that the size of the shell script does not change at all,
and none of the binary blobs are impacted.
- the approach I took was
mv cal_linux cal_linux.BAK
sed -e 's/LD_ASSUME_KERNEL=2.2.5/LD_ASSUME_KERNEL= /g' < cal_linux.BAK > cal_linux
chmod a+rx cal_linux
cal_linux -i gui
Note: you must have exactly 5 spaces in the substitution part of the sed command, because you're replacing 5 characters (2.2.5), and the size of the shell script must not change.
If you do that, the installer should run (one warning from awk still) and you should be able to install the product.
Tim

Forcing Disk to mount at consistent mount point

I want to put users home on a partition named UserData.
I have removed the /Users directory and made it a link to /Volumes/UserData
periodically at boot UserData decides to mount at "/Volumes/UserData 1" then the users home directory is not there so they get a new one when the login, the workstations are bound into AD.
How can I force UserData to mount at /Volumes/UserData consistently? /etc/fstab.hd says not to use it. Better yet I would like to mount it at /Users...

made a fstab file with these contents:
# Warning - this file should only be modified with vifs(8)
# Failure to do so is unsupported and may be destructive.
LABEL=UserData /UserData hfs rw 1 0
changed the /Users link to point to UserData it appears to mount under /UserData every time now, found out that the /Volumes/UserData\ 1 problem mostly occured after the machine went to sleep. which it should not have been doing anyway.

Mounted to a Series i5 System and Folders are Missing

I set up a folder on a IBM i5 system with 65 subfolders in it. I connect to the i5 thru Connect to Server and mount it just fine. When I open it folder it only shows 29 subfolders. I connect with an old Cube and the same thing, only 29 subfolders. I mapped the drive with PC's and all 65 folders show up on the PC's. Anyone has any ideas what is causing this?
MacBook Pro Mac OS X (10.4.8)

You will have to use Terminal.app to ssh or telnet to your IBM. You should see all folders that way.
There is probably some bug with afp on the IBM. (if that's how you're connecting) We have a linux box that uses a older version of afp and we have issues where 10.4 clients will try to connect but then be unable to. The fix was copying a working shorcut (connecting to the linux box) from a 10.3 or Mac OS 9.2 machine and then connecting that way. I don't think that this would work in your case because you have no trouble connecting.
PowerBook G4 Mac OS X (10.4.8) MacBook Pro

How to get selected row from a non-bind ADF table

Hi,
I have an ADF table that is based on a collectionModel built programmatically. The collectionModel is this:
model = new SortableModel(new ArrayList<ArrayList>());
Hence, it is not a binding table. My question is how to get the selectedRows from a non-bind table.
I am used to building binding ADF table and I know we can get it from voiterator.getCurrentRow, since the selectionListener is set to the binding....collectionModel.makeCurrent
<af:table value="#{bindings.ItasLookupTypesVO1.collectionModel}"
selectedRowKeys="#{bindings.ItasLookupTypesVO1.collectionModel.selectedRow}"
selectionListener="#{bindings.ItasLookupTypesVO1.collectionModel.makeCurrent}"
</af:table>
I am thinking maybe I need to write my own selectionListener, but need more advice/ideas of what's the codes in the customer selection Listener to get it from my SortableModel.
Please help.
Thanks
-Mina

I'm not sure if this works in your case, but check out the selection listener I write in this blog http://wp.me/pcBZk-eu
You should use the selection event and check the added set. This should give you access to the selected row.
Timo

How many lines we can print using Non-alv report list ?

Hi Experts,
How many lines we can print using Non-alv report list ?
regards
vishnu

Hi,
It depends on the page size according to the page size we can set the no. of lines as follows,
REPORT program_name NO STANDARD PAGE HEADING
LINE-SIZE 290
LINE-COUNT 65.
Hope it helps you,
Regards,
Abhijit G. Borkar

How to Delete Non-System State Backups in Windows 2008R2

Hello,
I am running a Windows 2008R2 server which uses Windows Server Backup to do the backups. We are using the backup-tool to create non-system state backups of the data-directories on this machine. The backup is done on a dedicated disk connected through iscsi
(to a Synology box). This backup disk has become too small and we have now replaced the Synology box with a bigger one. Here i created a new LUN again for the backup purposes.
Now for my question; The wbadmin.exe tool supplied with W2008R2 does not offer a way to delete the old backups. I know that in Win2012 (which we we also have running) I could add the new iscsi location and then (when enough backups are available on the new
target) use wbadmin.exe delete backup to delete the old non-system state backups; e.g.
wbadmin delete backup -version:08/07/2013-21:00
This (very undocumented) feature of Windows 2012 and higher works quite nice and is exactly what i am searching for on the W2008R2 machine; a way to delete the old backups (and under the hood delete the corresponding snapshots)
I've done quite a bit of research and it should be possible to do something similar in 2008 but then manually, The howto is described in the following link: http://blogs.technet.com/b/filecab/archive/2009/06/22/backup-version-and-space-management-in-windows-server-backup.aspx .
Basically it describes that you should use DiskShadow.exe to remove e.g. the oldest snapshot with a command like :
Delete shadows OLDEST \\?\Volume{7fc1871b-2e1f-11dd-a339-001e4fb7af35}
Windows Server backup (wbadmin) should then on the next run 'see' this deletion and update its list of available backups:
"You can perform the same steps manually to delete backups on demand. However, the backup catalog update cannot be done manually and it will happen instead during
the next backup."
I've done this on our box and it indeed removes the shadows from the list. However, in the Windows Backup 'dashboard' it still lists the backups as available. Also after a new backup has finished (according the the article this is when it should 'update'
its backup catalog). When I try to restore a backup from a date that i just removed it gives a nice message that this is impossible because the snapshot is not available (duh :)) ;
Unable to browse Local disk. The shadow copy of the backup stored on the backup destination cannot be found.
So it seems that the aforementioned method works; it removes the snapshot and frees diskspace, but it doesn't update the Windows Backup catalog. As a result the management tool (GUI) still lists the backups which are no longer available! How can i change
this? Is there any way to do this? I found one article which mentions that the Dashboard bases its screen on the Windows Logs and not on the actual VSS snapshots available:
http://forum.wegotserved.com/index.php/topic/23757-start-afresh-with-server-backup/ (WHS) In my situation however this seems unlikely because i don't have any logs that date back as far as my backups go.
In my opinion this is a real bug and it leaves us with a in-consequent backup schema. Does anyone have similar situations or even a solution to my problem?
Kind Regard, Martin

Hi Mandy,
Yes! I think i got my answer and I now get how windows backup works in Windows 2008 :-) It turns out that I dismissed some suggestions a bit too soon. The answer lies in the command mentioned earlier :
Wbadmin delete catalog
This command does delete all the backups from a perspective of the Windows Backup UI, but leaves the VSS snapshots intact. This means that the backups are still available, but you just can't restore them with the User Interface. In order to 'update' the
UI with the current available snapshots (which you can list with diskshadows list shadows all), you have to re-add the existing media on which the backups took place using the Wizard of the UI. It will then inform you that existing backups are available and
if you want to keep these for restore purposes. If you click 'yes', and THEN perform a backup ... All the current available backups will be shown in the User Interface :-)
So for my steps taken to change from one iscsi (iscsi1) to another (iscsi2):
- Add the 2nd iscsi target with the Windows Backup UI
using Backup schedule , Modify backup -> [desired options] => Add more backup destinations -> iscsi2
- Remove the 1st iscsi target with the Windows Backup UI
using Backup schedule , Modify backup -> [desired options] => Remove current backup destinations -> iscsi1
- Run some backups on the new destination. Old restore points are now still available. When enough restore points are available on the new volume iscsi2 start deleting old data from iscsi1 as follows:
- Run diskshadow
diskshadow
- list all the current snapshots
list shadows all
- remove all the snapshots of iscsi1 (repeat until all shadows are gone of iscsi1)
delete shadows oldest \\?\volume{yourvolumeid}\
- delete the windows backup catalog
wbadmin delete catalog
- Restart the windows backup UI and re-add your schedule on the new volume iscsi2. It will now ask if you want the keep the existing data for restore purposes; click yes.
- After the next backup only the backups of volume iscsi2 will be listed and everything is fine !
I Hope my post will help others with similar questions. It was quite a search before I understood the way it works. Basically as long as your VSS snapshots are still available and listed by diskshadow you still have the backups and you will be able to get
this in sync with the steps above (delete schedule and re-add originating targets containing the snapshots). After the next backup the UI will update itself.
(In my case someway along the way I lost my originating snapshots, but because I already had my new backup set it didn't bother me; It kept me from having to delete all 510 old backups :) with diskshadow)
Regard, Martin

How Can we get the data from Non-SAP to SAP in WebDynpro

Hi,
I hope u understand my query, How can we get the data from Non-SAP to SAP thru WebDynpro Programming.
Help out with the steps for getting the data or procedure.
Regards,
Mutyapu

You can expose the APIs in the Non-SAP backend as Web Services, and consume them in SAP by creating an Enterprise Proxy. Then these can be called just like normal class methods from Web Dynpro.
Regards,
Nithya

TS1646 How to remove credit card details? "None" option not there

How to remove credit card details? "None" option not there

Same here I can't update or download anything

How can I print from ipad to non wireless printer?

How can I print from ipad to non wireless printer.
....been trying to save document to pc to print.... but cant find a way to do so.....?

Actually you can print to a non wireless printer if you have apps on the iPad and your computer that will do this and as long as you can set up a WiFi network or the iPad and the computer are already on the same network.
I Am running an old OSX version on my iMac at work (Tiger OSX 10.4.11) and I have an app on my iPad called Save2 pdf. I downloaded a helper app on the Mac called WePrint. I do not have WiFi at work, but I create a WiFi network using the Ethernet connection to the Mac that my iPad can also join. As long as I can send the file/text/document to the Save2pdf app, I can print it on my old HP LaserWriter1012 which is not a wireless printer. This uses the Mac as the print server and the WePrint app on the Mac sends the doecument to the printer.
It's not a very elegant solution, and it is a little convoluted, but it does work.

Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

Hello.
I have a problem with OEL 6.5 and ocfs2.
When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
fstab:
UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
#UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
#UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

What is the output of:
# chkconfig --list o2cb
# chkconfig --list ocfs2
# cat /etc/ocfs2/cluster.conf

How can I get report of only non compliant clients via Fileshare or to admin mailbox each day?

I need to figure out how to get a daily report of non compliant clients in SCCM2012 to admin email or fileshare.
Is there any built-in report that returns only non compliant clients I could use to accomplish this,
and create alert subscription or exchange server connector to receive the message / file once a day ?
Do I need to use SQL Server Reporting Services for this ? New to SCCM and getting confused with all those reports,
sorry ;-)

Yes you need SSRS for this.
This will help.
http://be.enhansoft.com/post/2013/08/27/How-to-Set-up-a-Windows-File-Share-Subscription.aspx
http://be.enhansoft.com/post/2013/08/14/How-to-Set-up-an-Email-Subscription-in-SSRS.aspx
Non compliant for what?
http://www.enhansoft.com/

How can we do the validation for non visible records in table control.

Hi Experts,
I have a table control which displays list of material details. I have a button to upload the material details from excel file to table control directly. I have to validate all the customers which are exist in the table. But my item (Material) table control displays only 5 rows i.e only 5 entries are visible in module pool screen. The validation is done for 5 records only in PAI event, but i need to do validation for rest of the records too (Which are not visible on items table), if validation fails then needs to display error message.
How can we do the validation for non visible records in table control.
Regards,
Bujji

Hi,
try validating material before displaying it in table control...'
Rgds/Abhhi

How to : enumerate mounted vhd's, mount non-system vhd to ntfs folder?

Similar Messages

Maybe you are looking for