How to escape sql keywords

Hi,
I have this query which runs perfectly fine in sql
TextSelect Upper(SubString(f_name,1,1)) +
SubString(f_name,2,Len(f_name)) fname from xxx order by fname
But when I run this through coldfusion cfquery tagI get a
error "SubString. Incorrect Select List,".
I believe this error bcz coldfusion has the keyword substring
too.
Is there any way to escape the sql keywords and execute the
query.I tried [ ] but it escapes only tables and fieldnames not
this.
Ty for ur help..
Regards
AL

I suggest baby steps.
start with
select substring(f_name, 1, 1) fname
from yourtable
then this
select substring(f_name, 1, 1) fname, len(f_name) thelength
from yourtable
and keep adding to your query until it crashes. By the way,
don't you have to quote your alias names in ms sql? I rarely use it
so I don't know for sure.

Similar Messages

How to escape a single quotes from a string of dynamic sql clause?

if a single quotes exist in a dynamic sql clause for a string,
like
v_string :='select tname from tab where tabtype='table'',
there tabtype='table' will conflict with the single quote ahead.
could somebody tell me how to escape this single quotes?
thanks for your tips,
frederick

fredrick,
To represent one single quotation mark within a literal, enter two single quotation marks. For example :
v_string :='select tname from tab where tabtype=''table'''
Regards,
Srinivas

How to escape the special character ' (ascii 39) in a select query?

Hi,
does anybody know how to escape the special character ' (ascii 39) in a select query?
I've tried a lot of ways but nothing seems to work, for example I try to get all
names in table foo where coloumn name contains a '-sign (ascii 39)
select name from foo where name like '%\'%';
select name from foo where name like '%{'}%';
select name from atg_horse where name like '%chr(39)%'
... but neither works, I end up with a ORA-01756: quoted string not properly terminated
I would apriciate any help
/Carl-Michael

friends
thanks for ur time and effort that u gave to reply to my problem.
But my main problem is that when my application (VC++ 7) fires the following query in the oracle database , it does not return any rows.
SELECT count(*) FROM ORGANISATION WHERE UPPER(ORGANISATION.ORGANISATIONNAME)
LIKE N'β%' ORDER BY ORGANISATION.ORGANISATIONNAME
the above question in the previous thread was just to check on sql plus as it's editor does not support unicode characters.

How how to escape double quation in execute immediate in trigger

Hi all,
please inform me what is the mistake in this procedure.
i think the problem in how to escape double quation.
SQL> create or replace procedure P2
2 is
3 begin
4 execute immediate ' create or replace trigger t2 '
5 ||' before insert '
6 ||' on tb_test'
7 ||' for each row '
8 ||' declare '
9 ||' begin'
*10 ||' execute immediate ''create table t1 as select distinct(NVL(soundex(namess),'''NONE''')) from test';'*
11 ||' end;'
12 end;
13
14 /
Warning: Procedure created with compilation errors.
SQL> show error
Errors for PROCEDURE P2:
LINE/COL ERROR
10/83 PLS-00103: Encountered the symbol "NONE" when expecting one of
the following:
* & = - + ; < / > at in is mod remainder not rem return
returning <an exponent (**)> <> or != or ~= >= <= <> and or
like like2 like4 likec between into using || bulk member
submultiset
SQL>

See 'Text Literals' in the SQL Language doc for how to use alternative quoting
http://docs.oracle.com/cd/B28359_01/server.111/b28286/sql_elements003.htm
>
Here are some valid text literals:
'Hello'
'ORACLE.dbs'
'Jackie''s raincoat'
'09-MAR-98'
N'nchar literal'
Here are some valid text literals using the alternative quoting mechanism:
q'!name LIKE '%DBMS_%%'!'
q'<'So,' she said, 'It's finished.'>'
q'{SELECT * FROM employees WHERE last_name = 'Smith';}'
nq'ï Ÿ1234 ï'
q'"name like '['"'

How to escape & symbol in Update statement

Hi all,
How to escape & symbol in Update statement..
Below is my update statement which contains lot of & symbols...
UPDATE ContentItem SET ContentData =
'&lt:'
where ContentItemId = 398
if i run this query it asks input value for lt..
Can anyone give the suggestions please.. Its very urgent..
Cheers,
Moorthy.GS

Hey all,
Thanks for your reply.
But i am getting error for below statement
set define off;
UPDATE ContentItem SET ContentData =
'<?xml version="1.0" encoding="utf-16"?>
<contentItem xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" id="398" resizable="false" contentTypeId="15" parentContentTypeId="0" sortOrder="0" width="0" height="0" xsltFileId="" createDate="0001-01-01T00:00:00" startDate="2006-12-06T00:00:00" endDate="2010-12-31T00:00:00" publishedDate="0001-01-01T00:00:00" CategoryId="0" DotNetClassType="HPCi.OnlineContentDelivery.Core.ContentItem" DotNetAssVersion="1.0.0.0">
<title>Executive_Photos</title>
<CampaignName />
<files />
<textItems>
<textItem type="" linkName="" linkUrl="" identifier="Body" dataDocFileId=""><?xml version="1.0" encoding="utf-16"?>
<contentItem xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" id="40" contentTypeId="10" parentContentTypeId="0" sortOrder="0" createDate="0001-01-01T00:00:00" startDate="2006-04-04T00:00:00" endDate="2006-05-06T00:00:00" publishedDate="0001-01-01T00:00:00" DotNetClassType="HPCi.OnlineContentDelivery.Core.ContentItem" DotNetAssVersion="1.0.0.0">
<title>Image Gallery</title>
<files />
<textItems>
<textItem type="" linkName="" linkUrl="" identifier="Body" dataDocFileId="" xsltFileId="">
<script language="javascript" type="text/javascript">
function showImage(sImgId, sTargetImgPath)
     document.getElementById("imgLargeImage").src = sTargetImgPath;
</script>
<div id="topThumbContainer" style="float:left; width:100%;">
     <div id="divThumbs" style="float:left;">
          <table>
               <tr>
                    <td width="84px" >
                         <div id="divThumbImage1" class="divThumbImage" onClick="javascript:showImage(''ThumbImg1'', ''Images/bio/BobMetz_lg.jpg'');">
                              <img id="ThumbImg1" src="Images/bio/BobMetz_sm.jpg" width="63" height="85" />
                         </div>
                         <div id="divThumbText1" style="text-align:center;">Bob Metz</div>
                    </td>
                    <td>
                         <div id="divThumbImage3" class="divThumbImage" onClick="javascript:showImage(''ThumbImg3'', ''Images/bio/Crawford_lg.jpg'');">
                              <img id="ThumbImg3" src="Images/bio/Crawford_sm.jpg" width="63" height="85" />
                         </div>
                         <div id="divThumbText3" style="text-align:center;">David Crawford</div>
                    </td>
               </tr>
               <tr>
                    <td width="84px" >
                         <div id="divThumbImage2" class="divThumbImage" onClick="javascript:showImage(''ThumbImg2'', ''Images/bio/JamieGallo_lg.jpg'');">
                              <img id="ThumbImg2" src="Images/bio/JamieGallo_sm.jpg" width="63" height="85"/>
                         </div>
                         <div id="divThumbText2" style="text-align:center;">Jamie Gallo</div>
                    </td>
                    <td >
                         <div id="divThumbImage4" class="divThumbImage" onClick="javascript:showImage(''ThumbImg4'', ''Images/bio/Mayfield_lg.jpg'');">
                              <img id="ThumbImg4" src="Images/bio/Mayfield_sm.jpg" width="63" height="85"/>
                         </div>
                         <div id="divThumbText4" style="text-align:center;">Arlene Mayfield</div>
                    </td>
               </tr>
               <tr>
                    <td width="84px" >
                         <div id="divThumbImage5" class="divThumbImage" onClick="javascript:showImage(''ThumbImg5'', ''Images/bio/Turnbull_lg.jpg'');">
                              <img id="ThumbImg5" src="Images/bio/Turnbull_sm.jpg" width="63" height="85" />
                         </div>
                         <div id="divThumbText5" style="text-align:center;">Robert Turnbull</div>
                    </td>
                    <td>
                         <div id="divThumbImage6" class="divThumbImage" onClick="javascript:showImage(''ThumbImg6'', ''Images/bio/hessels_lg2.jpg'');">
                              <img id="ThumbImg6" src="Images/bio/hessels_sm2.jpg" width="63" height="85" />
                         </div>
                         <div id="divThumbText6" style="text-align:center;">Jane T. Hessels</div>
                    </td>
               </tr>
               <tr>
                    <td width="84px" >
                         <div id="divThumbImage7" class="divThumbImage" onClick="javascript:showImage(''ThumbImg7'', ''Images/bio/bauz_lg.jpg'');">
                              <img id="ThumbImg7" src="Images/bio/bauz_biopic.jpg" width="63" height="85" />
                         </div>
                         <div id="divThumbText7" style="text-align:center;">Melanie Wernick</div>
                    </td>
                    <td>
                         <div id="divThumbImage8" class="divThumbImage" onClick="javascript:showImage(''ThumbImg8'', ''Images/bio/child_lg.jpg'');">
                              <img id="ThumbImg8" src="Images/bio/child_biopic.jpg" width="63" height="85" />
                         </div>
                         <div id="divThumbText8" style="text-align:center;">Mike Child</div>
                    </td>
               </tr>
               
               </tr>
          </table>
     </div>
</div>
</textItem>
<textItem type="" linkName="" linkUrl="" identifier="NameTitle" dataDocFileId="" xsltFileId="">Images</textItem>
</textItems>
</contentItem></textItem>
</textItems>
</contentItem>'
where ContentItemId = 398
Error is "SQL Error: ORA-01704: string literal too long"
My contentdata column is CLOB datatype.
Pls help me....
Moorthy.GS

How do you use Keywords?

I'm curious how you use Keywords. I started to go into my pictures today and add them. I went first to the first Event I had and looked for any pictures of my kids. I was going to make my Keywords pretty broad. If they were aged 0 - 5, then that was my Keyword. But, then I had a picture of a brother and a sister, where the brother was 8 and the sister was 4. What to do? Then I changed it from 0-5 to 0-10. I've tagged about 300 of them that way, but now I'm wondering if it's worth the time. I know I can also use multiple Keywords, but that just seems to be a lot of work.
For reference, I name all my pictures when I input them. I use the following format: name of person - event (if pertinent) - town - year, so that might come out as Chip - Halloween - Golden - '08. That way, I find it pretty easy to find whatever I might be looking for.
Do you use Keywords? If so, how?
Thanks.
Chip

The BEST system of keywording is the system you will actually execute. So your priority should be figuring out what you are willing and happy to do on a fairly regular basis.
Since it already sounds like your system is a hassle, I don't know that your keyword needs to reflect the age---you can easily search on KW: Kids and Date Range: (whatever the young years would be) after the fact, and save yourself trouble while tagging. Or set that up as a Smart Album, and then once you've done the "okay when the kid was 0-4 that would be the dates 1990-1994", you don't need to do it again.
Certainly, though, you should be open to multiple keywords on the same photo--that's the power of keywords, to categorize the same photo in multiple aspects.
I don't bother naming my photos, but unlike TD, I create a lot of smaller events and name them pretty carefully, similar to your photo names. I use keywords for recurring themes, like Me, Family, Friends, Rivers, Flowers, or places I visit multiple times. Things with a beginning and ending, I lean on the event name to track, eg "Christmas Eve, Christmas--Opening Gifts, Christmas--Dinner, Christmas--Hanging Out".
I find it very important to use the shortcuts, so that I can skim through 300 pix from a national park and just hit f to apply the Family keyword, m to apply the Me keyword, w for pictures of water, l for pictures of flowers, etc. (The keyword pane must be open to use the shortcuts)
I tend to set up a smart album based on a keyword about the same time I set up a keyword, so that the list of smart albums helps me remember what I am doing with keywords. Also, thinking in terms of which albums you want to be browsing helps figure out how you need to keyword the photos--when your relatives or friends come over, what do you want to show them?

How do I transfer keywords in Lightroom from one computer to another?

How do I transfer keywords in Lightroom from one computer to another?

You know, in the one screen capture, from the old computer, we can see that the photo has the keyword "bees"
In the other screen capture, from the new computer, we cannot see the keyword "bees"
And better yet, show us the Keywording Panel instead of the Keyword List Panel
I am also concerned that you are showing us the original catalog on the new computer that you created via importing the photos. That's not what we want to see.
So please confirm that you are using the catalog file that was copied from the old computer, and when placed on the new computer, you double-clicked on that exact catalog file, and then created the screen capture. Please confirm that you are NOT looking at the catalog you created by importing the photos.

Keyword management - how do you move keywords up one level?

How do you move keywords up one level in the hierarchy? Sometimes when working quickly, keywords and subgroups of keywords get inadvertently highlighted and moved as a child under another keyword or group. I can't figure out how to move them back out again to the root level.

I can't figure out how to move them back out again to the root level.
You can drag and drop sub keywords to other locations higher or lower in the nested folder but you don't seem able to drag from sub level to root level.
The easiest workaround would be to have a regular Back up of the list (pop menu from icon top right keyword panel: export keywords) and when not having added new words just use clear and import the back up to restore.
If you did edit the list you can choose to export current list and with a simple text editor make the changes for keywords and sub keywords you want, save and then use again clear and import to retrieve the correct list.

How to escape special characters in Simple Transformation

Hi Experts,
I have got a problem to get a well formed xml document from the below simple transformation. The content of maktx contains
special characters like & <, which are not allowed in a well formed XML-Document. But the result of the Simple Transformation
contains this charcters even after the transformation as you can the in the result below. Has anyone a hint how to escape the
characters included in the maktx.
The transformation for maktx, should be something like
Before: Material & < TEST
After: Material &amp &lt TEST
Report wihich calls the simple transformation
types:
BEGIN OF t_mat,
   matnr type matnr,
   maktx type maktx,
end of t_mat.
Data:
mat type t_mat,
xml_stream type xstring.
START-OF-SELECTION.
mat-matnr = '4711'.
mat-maktx = 'Material & < Test'.
CALL TRANSFORMATION ztest_st2
        SOURCE mat = mat
        RESULT XML xml_stream.
CALL FUNCTION 'DISPLAY_XML_STRING'
EXPORTING xml_string = xml_stream.
Simple Transformation
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="MAT"/>
<tt:template>
    <Leistungsschild>
        <CHARACT> MATNR </CHARACT>
        <CHARACT_DESCR> Materialnummer </CHARACT_DESCR>
        <VALUE tt:value-ref="MAT.MATNR"/>
        <CHARACT> MAKTX </CHARACT>
        <CHARACT_DESCR> Materialkurztext </CHARACT_DESCR>
        <VALUE tt:value-ref="MAT.MAKTX" />
    </Leistungsschild>
</tt:template>
</tt:transform>
RESULT
<?xml version="1.0" encoding="utf-8" ?>
<Leistungsschild>
<CHARACT>MATNR</CHARACT>
<CHARACT_DESCR>Materialnummer</CHARACT_DESCR>
<VALUE>4711</VALUE>
<CHARACT>MAKTX</CHARACT>
<CHARACT_DESCR>Materialkurztext</CHARACT_DESCR>
<VALUE>Material & < Test</VALUE>   </Leistungsschild>

Hi Sandra,
First of all thaks for your quick answer to my problem.
I see what you mean and get the same result, if I am using data-type string instead of xstring. But the recommendation in the XML-Books of SAP is to use XSTRING to save memory and circumflex problems between Codepages, when writing the XML-Stream to a filesystem.
As you can see in the code abvoe I am using a SAP-FM to display the XML-Stream and this FM works only with XSTRING´s,
that is one reason why I don´t understand that it displays it in the wrong way.
Even the Debugger shows me for the XSTRING the wrong result. Does all that mean that the escaping will not be applyed if you are working with XSTING´s??

How to escape % or % in a String?

Hi, friends, I need to use a string variable, but don't know how to escape <% and %> in string, I tried to put \ between < and %, but compiler said it was invalid escape character. and do I need to escape / , too? thanks for any help. the code is here:
<% String sc;
if (request.getParameter("operation")==null) {
sr="/servlet/littleBee_proj.Change_PCServlet?red=<%= request.getParameter("red")%>&
green=<%= request.getParameter("green")%>&blue=<%= request.getParameter("blue") %>&
applique.x=<%= request.getParameter("applique.x") %>&
applique.y=<%= request.getParameter("applique.y") %>";
else {
sr="/servlet/littleBee_proj.Change_PCServlet?red=<%= request.getParameter("red") %>&
green=%= request.getParameter("green") %>&blue=<%= request.getParameter("blue") %>&
applique.x=<%= request.getParameter("applique.x") %>&applique.y=<%= request.getParameter("applique.y") %>&
operation=<%= request.getParameter("operation") %>";
%>
<br> <INPUT TYPE="IMAGE" NAME="applique" SRC="<%= sr %>" >
</FORM>
</BLOCKQUOTE>

You won't need the escape characters, because you don't need the <% and %>. You're already inside a java block, so go ahead and take advantage of it. Simply append the method call to your string as you usually would.
<% String sc;
if (request.getParameter("operation")==null) {
sr="/servlet/littleBee_proj.Change_PCServlet?red="+request.getParameter("red")
+"&green="+request.getParameter("green")+"&blue="+ request.getParameter("blue")
+"&applique.x="+ request.getParameter("applique.x") +"&applique.y="
+request.getParameter("applique.y");
}Also, unless you know exactly what you're getting back from your request.getParameter() methods, it's usually a good idea to enclose them with single quotes ( ' ) in case there's a space or something in there. If there guaranteed to be numeric though, then you're probably ok.

How to connect SQL server

Hi
I want to know how to connect SQL server using DNSless connection ?
/* 2003/02/06 eric.leung
* Source : HOME
import java.sql.*;
import java.lang.*;
public class ejdbcsel {
     public static void main(String args[]) {
          // eric_jsp is ODBC User DNS
          // String url = "jdbc:odbc:eric_jsp";
          // Using DSNless connection
          String url = "";
          url = "jdbc:odbc:DRIVER={Microsoft Access Driver (*.mdb)}" +
          ";SERVER=127.0.0.1;DBQ=c:\\example\\ERIC_JSP.mdb";
          Connection con;
          String query;
          query = "select * from pt_mstr";
          Statement stmt;
     try {
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     } catch (ClassNotFoundException e) {
          System.err.print("ClassNotFoundException " );
          System.err.println(e.getMessage());
     try {
          con = DriverManager.getConnection (url,"","");
          stmt = con.createStatement();
          ResultSet rec = stmt.executeQuery(query);
          // Scan the Database
          while(rec.next()) {
               System.out.println(rec.getString("pt_part") + "\t"
               + rec.getString("pt_desc"));
          stmt.close();
          con.close();
     } catch (SQLException ex) {
          System.err.println("SQLException: " + ex.getMessage());
     catch (Exception e) {
          System.err.println("Error: " + e.toString() + " " + e.getMessage());

Use a driver...
http://java.sun.com/products/jdbc/driverdesc.html
http://industry.java.sun.com/products/jdbc/drivers

How to install SQL SERVER 2008 r2 in window 7 home premimum 64bit

how to install SQL SERVER 2008 r2 in home premimum 64bit os. can any say that weather it will support or not in window 7 home premimum os.
my server log file:
Final result: SQL Server installation failed.
To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation
failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-03-27 00:52:25
End time: 2014-03-27
00:56:09
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL
Server\100\Setup Bootstrap\Log\20140327_005035\SSCRuntime_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: SEVALAL-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance
Instance ID Feature Language
Edition Version Clustered
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER
Database Engine Services 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER
SQL Server Replication 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER
Full-Text Search 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSAS10_50.MSSQLSERVER
Analysis Services 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSRS10_50.MSSQLSERVER
Reporting Services 1033 Standard Edition 10.50.1600.1 No
Sql Server 2008 SEVALAL MSSQL10.SEVALAL
Database Engine Services 1033 Express Edition 10.3.5500.0
No
Sql Server 2008 SEVALAL MSSQL10.SEVALAL
SQL Server Replication 1033 Express Edition 10.3.5500.0
No
Sql Server 2008 R2
Client Tools Connectivity 1033
10.50.1600.1 No
Sql Server 2008 R2
Client Tools Backwards Compatibility 1033
10.50.1600.1 No
Sql Server 2008 R2
Client Tools SDK 1033
10.50.1600.1 No
Package properties:
Description: SQL Server Database Services
2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: G:\01.SQL Server 2008 R2 FullVersion\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup
Bootstrap\Log\20140327_005035\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: IS,SSMS,ADV_SSMS,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL
Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft
SQL Server
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup
Bootstrap\Log\20140327_005035\ConfigurationFile.ini
Detailed results:
Feature: Integration
Services
Status: Failed:
see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management
Tools - Complete
Status: Failed:
see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management
Tools - Basic
Status: Failed:
see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync
Framework
Status: Failed:
see logs for details
MSI status: Passed
Configuration status: Passed

my summary log file information:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-03-27 00:52:25
End time: 2014-03-27 00:56:09
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140327_005035\SSCRuntime_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: SEVALAL-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Database Engine Services 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER SQL Server Replication 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Full-Text Search 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSAS10_50.MSSQLSERVER Analysis Services 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 R2 MSSQLSERVER MSRS10_50.MSSQLSERVER Reporting Services 1033
Standard Edition 10.50.1600.1 No
Sql Server 2008 SEVALAL MSSQL10.SEVALAL Database Engine Services 1033
Express Edition 10.3.5500.0 No
Sql Server 2008 SEVALAL MSSQL10.SEVALAL SQL Server Replication 1033
Express Edition 10.3.5500.0 No
Sql Server 2008 R2 Client Tools Connectivity
1033 10.50.1600.1 No
Sql Server 2008 R2 Client Tools Backwards Compatibility
1033 10.50.1600.1 No
Sql Server 2008 R2 Client Tools SDK
1033 10.50.1600.1 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: G:\01.SQL Server 2008 R2 FullVersion\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140327_005035\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: IS,SSMS,ADV_SSMS,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140327_005035\ConfigurationFile.ini
Detailed results:
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140327_005035\SystemConfigurationCheck_Report.htm

How to restore SQL Server 2008 database to SQL Server Express 2012

How to restore SQL Server 2008 database to SQL Server Express 2012.
I BACKED UP a SQL Server 2008 database from work, which runs the enterprise version of 2008, and I tried to RESTORE it to my new 64-Bit home PC which is running the new SQL Server Express 2012 64-Bit (Advanced Edition).
But if fails. I get the following message text.
Can anyone help me please. I thought restoring a 2008 database to the later version 2012 would be possible.
Here is the error message. Thanks.
TITLE: Microsoft SQL Server Management Studio
Restore of database failed. (Microsoft.SqlServer.Management.RelationalEngineTasks)
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The database was backed up on a server running version 8.00.2039. That version is incompatible with this server, which is running version 11.00.3128. Either restore the database on a server that supports the backup, or use a
backup that is compatible with this server. (Microsoft.SqlServer.SmoExtended)

ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The database was backed up on a server running version 8.00.2039. That version is incompatible with this server, which is running version 11.00.3128. Either restore the database on a server that supports the
backup, or use a backup that is compatible with this server. (Microsoft.SqlServer.SmoExtended)
Are you sure your database is SQL server 2008 from error message it seems your SQL server version is 2000.I guess you have multiple versions of SQL server.
AFAIK you cannot restore backup of SQL server 2000 to 2012 directly .Restore it first to SQL 2008/2008R2 or 2005 then take backup again of new database created and then you would be able to restore it on 2012.Its kind of intermediate way
Also make sure your DB size is less than 10 G as max DB size supported by Express edition is 10 G and if your DB size is more than 10 G restore will fail.
You are also trying to restore enterprise DB backup on express edition so you will loose enterprise features on express edition
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

How to connect sql server 2008 r2 sp2 with vs2013 ultimate?

how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?

Hi Shahzad,
>>how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?
Based on your issue, if you wan to connect the sql server 2008 r2 sp2 from VS2013 IDE. I suggest you can try the Ammar and darnold924's suggestion to check your issue.
In addition, I suggest you can also refer the following steps to connect the sql server 2008 r2 sp2 with visual studio 2013 ultimate.
Step1: I suggest you can go to VIEW->SQL Server Object Explorer->Right click SQL Server->Add SQL Server.
Step2: After you connect the SQL Server 2008 r2 sp2 fine, I suggest you can go to VIEW->Server Explorer-> right click the Data Connection->Add Connection.
And then you can create the connect string in the Add Connection dialog box.
Hope it help you!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to move SQL database from one location to another location i.e. from C' drive to D' drive

Hi, How to move SQL database from one location to another location i.e. from C' drive to D' drive ? please share some link.
Thanks and Regards, Rangnath Mali

Hi Rangnath,
According to your description, my understanding is that you want to move databased from C drive to D drive.
You can detach Database so that the files become independent, cut and paste the files from source to destination and attach again.
There are two similar posts for your reference:
http://mssqltalks.wordpress.com/2013/02/28/how-to-move-database-files-from-one-drive-to-another-or-from-one-location-to-another-in-sql-server/
http://stackoverflow.com/questions/6584938/move-sql-server-2008-database-files-to-a-new-folder-location
Best Regards,
Wendy
Wendy Li
TechNet Community Support

How to escape sql keywords

Similar Messages

Maybe you are looking for