How to exclude a cell from a row in Report Painter

Hello,
In report painter, I am calculating a percentage of a row within a separate row. Is there a way to only calculate this percentage in certain cells within the row? The row defaults to calculate the entire population but it is only necessary for a few cells.
Thanks,
Megan

It is possible to reference SSRS elements directly using the ReportItems collection. If your total tablix cell is outside of yoour matrix groups, you can use this collection to accomplish what you want:
=ReportItems!Matrix1Total.Value + ReportItems!Matrix2Total.Value
where Matrix1Total and Matrix2Total is the name of the cell that contains your totals. Note that for this to work, the cell name must be unique. If the total cell is inside a group, it will be repeated once for each instance of the group and will not be
unique.
You may be able to do it using the Sum aggregate and specifying the dataset for the scope variable:
=Sum(Fields!fld1.Value, "DataSet1")+Sum(Fields!fld2.Value,
"DataSet1")+Sum(Fields!fld3.Value,
"DataSet1")+Sum(Fields!fld4.Value,
"DataSet1")+Sum(Fields!fld5.Value,
"DataSet1")+Sum(Fields!fld1.Value,
"DataSet2")+Sum(Fields!fld2.Value,
"DataSet2")+Sum(Fields!fld3.Value,
"DataSet2")+Sum(Fields!fld4.Value,
"DataSet2")+Sum(Fields!fld5.Value,
"DataSet2")
This will work as long as you are not filtering the dataset in your Matrix properties. If you are, those
filters will not apply to this expression and the numbers will not total correctly.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Similar Messages

Custom row-fetch and how to get column values from specific row of report

Hi -- I have a case where a table's primary key has more than 3 columns. My report on the
table has links that send the user to a single-row DML form, but of course the automatic
fetch won't work because 1) I can't set more than 3 item values in the link and 2) the
auto fetch only handles 2 PK columns.
1)
I have written a custom fetch (not sure it's the most elegant, see second question) that is working
for 3 or few PK columns (it references the 1-3 item values set in the link), but when there are
more than 3, I don't know how to get the remaining PK column values for the specific row that was
selected in the report. How can I access that row's report column values? I'll be doing it from the
form page, not the report page. (I think... unless you have another suggestion.)
2)
My custom fetch... I just worked something out on my own, having no idea how this is typically
done. For each dependent item (database column) in the form, I have a source of PL/SQL
function that queries the table for the column in question, using the primary key values. It works
beautifully, though is just a touch slow on my prototype table, which has 21 columns. Is there
a way to manually construct the fetch statement once for the whole form, and have APEX be smart
about what items get what
return values, so that I don't have to write PL/SQL for every item? Because my query data sources
are sometimes in remote databases, I have to write manual fetch and dml anyway. Just would like
to streamline the process.
Thanks,
Carol

HI Andy -- Well, I'd love it if this worked, but I'm unsure how to implement it.
It seems I can't put this process in the results page (the page w/ the link, that has multiple report rows), because the link for the row will completely bypass any after-submit processes, won't it? I've tried this in other conditions; I thought the link went directly to the linked-to page.
And, from the test of your suggestion that I've tried, it's not working in the form that allows a single row edit. I tried putting this manually-created fetch into a before header process, and it seems to do nothing (even with a hard-coded PK value, just to test it out). In addition, I'm not sure how, from this page, the process could identify the correct PK values from the report page, unless it can know something about the row that was selected by clicking on the link. It could work if all the PK columns in my edit form could be set by the report link, but sometimes I have up to 5 pk columns.
Maybe part of the problem is something to do with the source type I have for each of the form items. With my first manual fetch process, they were all pl/sql functions. Not sure what would be appropriate if I can somehow do this with a single (page level?) process.
Maybe I'm making this too hard?
Thanks,
Carol

How do I read text from specific rows and columns in a tree structure?

How do I read text from specific rows and columns in a tree structure? In a table you can specify the cell to read from but I have not been able to figure out how to do this with a tree structure.

You need to set two properties to activate the correct cell and then you can read it's string property.
The positioning properties are the "ActiveItemTag" and
"ActiveColNum" properties. With them you select the tree item by it's tag and the active column. The string can then be read from the "Cell String" property.
MTO

How to exclude salary arrears from pension deduction?

I have setup a pension retro element and its calculating the retro amount correctly.
However, its using sum of salary arrears (say,arrears for the month of March and April) and adding that to May salary and deducting pension on the total sum.
(we do not want this, we want only May salary to be considered for pension retro element)
Does anyone know how to exclude salary arrears from pension deduction element? Is there any obvious step, which I am missing in while defining the element?

Hi,
While doing retro for arrears, it will give at a time in one payroll only, no standard for installment payments.
2nd option:
Calculate the Total Arrears amount and divide it by four installments and through IT 0014 with New wage type and give for 4 months as start and end date.
* you have to create a new wage type which is taxable and assigned to IT 0014.
* add this new wt in Remuneration form in Earnings side.
Regards,
Praneeth kumar

How to exclude some tables from schema level replicatio????

Hi,
I am working on oracle10g stream replication.
My replication type is "Schema Based".
So can anyone assist me to undersatnd, how to exclude some tables from schema based replication.
Thanks,
Faziarain

You can use rules and include them in the rule set, lets say you dont want LCR to be queued for table_1 in schema SALES, write two rules one for DDL and another for DML with NOT logical condition.
DBMS_RULE_ADM.CREATE_RULE(
rule_name => 'admin.SALES_not_TALBE_1_dml', condition => ' (:dml.get_object_owner() = ''SALES'' AND NOT ' ||
' :dml.get_object_name() = ''REGIONS'') AND ' ||
' :dml.is_null_tag() = ''Y'' ');
DBMS_RULE_ADM.CREATE_RULE(
rule_name => 'admin.hr_not_regions_dlll',
condition => ' (:dml.get_object_owner() = ''SALES'' AND NOT ' ||
' :ddl.get_object_name() = ''table_!'') AND ' ||
' :dsl.is_null_tag() = ''Y'' ');
just go through this document once, http://download.oracle.com/docs/cd/B28359_01/server.111/b28321/strms_rules.htm#i1017376
Edited by: user8710159 on Sep 16, 2009 5:21 PM

How to exclude schema name from exported files (PL SQL Developer)

Dear all,
Just one question: I am using PL SQL Developer. My goal is to export some data (as .sql and .dmp files) from one database and to import them into the another database (both databases have identical structure - test database and production, just different database names and names of schema. In order to make it possible, I need to exclude schema name from generated export file. I believe that it is possible to do it automatically by setting up parameters of PL SQL Developer. How?
Thank you in advance,
Kindest regards,
Dragana

In the meantime, I have found the answer on my previous question:
Actually, the initial idea (how to exclude schema name from exported files) was wrong. No need for any intervention.
Trick is: Schema name can be changed during the import of exported files (PL SQL Developer during import gives possibility: From User (old schema) To User (new schema) .
Hope that this will be useful info for others.
Dragana

How to hide edit link for some rows in report? (according to value of col)

Helo,
How to hide edit link for some rows in report? (according to value of column)
regards
siyavuş

Hi siyavuş
You can do this by taking the edit link off the report and putting it into your report SQL.
Use something like Select CASE WHEN (condition) THEN
'Put your edit link in here as an html Anchor like<a href="(target)">Edit</a>'
ELSE
tt.value
END edit_link
FROM test_table tthope it helps,
Gus..
You can reward this reply (and those of other helpers) by marking it as either Helpful or Correct.
This allows forum users to quickly find the correct answer.
;-)

How to remove the underline from Title of a report.

How to remove the underline from Title of a report.
plz tell.

You have to go inside the title view :-)
Regards,
Stefan

How the data is fetched from the cube for reporting - with and without BIA

hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider     *****Table type      ***** Viewed at      ***** Records, Selected     *****Records, Transported
Cube A     ***** blank ***** 0.624305      ***** 8,087,502      ***** 2,011
Cube B     ***** E ***** 42.002653 ***** 1,669,126      ***** 6
Cube B     ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
Cube B     *****E     *****46.620825     ****1,669,126****     6
Cube B     *****F     ****106.148337****     2,426,030*****     6
Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
Cube A     *****F     ****90.721171****     4,293,420     *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.

Hi,
yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
Regards,
Jens

How the data is fetched from the cube for reporting

hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider     *****Table type      ***** Viewed at          ***** Records, Selected     *****Records, Transported
Cube A     *****             blank                 *****           0.624305         *****          8,087,502        *****             2,011
Cube B     *****                     E   *****                      42.002653 *****                  1,669,126            *****                    6
Cube B     *****                     F *****                     98.696442    *****                  2,426,006       *****                    6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
Cube B     *****E     *****46.620825     ****1,669,126****     6
Cube B     *****F     ****106.148337****     2,426,030*****     6
Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
Cube A     *****F     ****90.721171****     4,293,420     *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.

Hi Jay,
Thanks for sharing your analysis.
The only reason I could think logically is BWA is having information in both E and F tables in one place and hence after selecting the records, it is able to aggregate and transport the reords to OLAP.
In the second case, since E and F tables are separate, aggregation might be happening at OLAP and hence you see more number of records.
Our Experts in BWA forum might be able to answer in a better way, if you post this question over there.
Thanks,
Krishnan

How to include variable in the text column in report painter?

Dear Expert,
Would like to seek for your help to include How to include variable in the text column in report painter?Please advice.
Thank you.
Regards,
Karen
Edited by: Karen Swee Ping Ho on Jun 17, 2011 2:48 AM

Hi,
Thank you for the promt reply.
1) How I include the variable in the column header to display fiscal year which I have selected from the selection screen?
which variable should i use?
2) Where can i find more information about the characteristic and which variable to be use base on the characteristic?
For example: I would like to display the fiscal year from the selection screen/input screen when execute the report which also will reflected to the element definition and will display the fiscal year also in the column text?
3) Kindly advise base on question 2, the variable that i use in element definition it will also display in selection screen?
4) When execute the report the first selection screen input parameter it obtain from where it is from element definition?
5) Please advice how to be done when report execute with first screen input selection will also reflect the element definition of column and rom with the selection of the fiscal year?
Please help.
many thanks
Edited by: KH on Jun 18, 2011 7:18 AM

How To Concatenate Column Values from Multiple Rows into a Single Column?

How do I create a SQL query that will concatenate column values from multiple rows into a single column?
Last First Code
Lesand Danny 1
Lesand Danny 2
Lesand Danny 3
Benedi Eric 7
Benedi Eric 14
Result should look like:
Last First Codes
Lesand Danny 1,2,3
Benedi Eric 7,14
Thanks,
David Johnson

Starting with Oracle 9i
select last, first, substr(max(sys_connect_by_path(code,',')),2) codes
from
(select last, first, code, row_number() over(partition by last, first order by code) rn
from a)
connect by last = prior last and first = prior first and prior rn = rn -1
start with rn = 1
group by last, first
LAST       FIRST      CODES
Lesand         Danny          1,2,3
Benedi         Eric           7,14Regards
Dmytro

How to exclude Web App from search results

Hi
Search results link to a unstyled Web App instead to the actual page it resides in.
Please do this:
1. go to: http://kinship.businesscatalyst.com/
2. search for "Michael" on the top global search
3. on the search results page click on the name (link).
4. you will see Michael's web app item not the actuall page it resides in (http://kinship.businesscatalyst.com/About/the-team)
How to avoid getting web app results in search?
Thanks
Micha

Hi Micha
Just add “&OT=35 “ at the end of the action in your search form:
Ex:
<form name=”xxxx” method=”post” action=”/Default.aspx?SiteSearchID=3566&ID=/results&OT=35”>
<div class=”search-box”><input type=”text” class= ............../>
<input type=”submit” class=”cat_button” value=”search” />
</div>
</form>
Here are the rest of the content types IDs, should you come across similar situations in the future:
Web Pages = 1
Literature = 6
Announcements = 7
FAQs = 9
Forums = 43
Blogs = 55
Web Apps = 35
Catalogs = 26
Bookings = 48
You can exclude multiple areas from a search, simply list them with commas: &OT=35,1,6

How to Exclude an Account from the script

Hi BPC Experts,
Below script, captures 403 DIVACCOUNTs as below.
Deposits - DA_221101
Lending - DA_211101
Current Account - DA_221102
Plus around 400 accounts.
From the above 403 accounts, I have to exclude the Current Account - DA_221102 alone for the Flow: FL_AVG_CLO_ADJ in the below script.
How can I make the change in the below script or in the dimension property.
Below script should exclude the FLOW = FL_AVG_CLO_ADJ, just only for the Current Account - DA_221102. For all other DIVACCOUNTS, it should consider the FLOW = FL_AVG_CLO_ADJ.
Advise me, please. Enclosed the screen shot for ref.
Exclude this FLOW.bmp shows the flow which needs to be excluded in the transfer from Source model to Reporting model.
Flow.bmp shows the FLOW = FL_AVG_CLO_ADJ .
DIVACCOUNT shows the account ids.
Logic Script:
*SELECT (%CATYP%,"[CAT_TYPE_CALC]","CATEGORY","[ID] = %CATEGORY_SET%")
*SELECT (%TIMMBERS%,"[ID]","TIME","[%CATYP%]='F'")
*SELECT (%DACMBERS%,"[ID]","DIVACCOUNT","[REPORT_ACC]<>''")
*XDIM_MEMBERSET BOOK=BAS(BK_ALL)
*XDIM_MEMBERSET DATASRC=BAS(DS_MGT_TOTAL)
*XDIM_MEMBERSET DETAIL=BAS(DT_ALL)
*XDIM_MEMBERSET DIVACCOUNT=%DACMBERS%
*XDIM_MEMBERSET DIVOWNVIEW=BAS(DO_TOT)
*XDIM_MEMBERSET FLOW=BAS(FL_CLO),FL_NONE,FL_AVG_CLO_ADJ
*XDIM_MEMBERSET REPRICING=<ALL>
*XDIM_MEMBERSET RPTCURRENCY=LC
*XDIM_MEMBERSET TIME=%TIMMBERS%
*XDIM_MEMBERSET TRNCURRENCY=BAS(TOTAL_CUR)
*DESTINATION_APP = Reporting
*SKIP_DIM = BOOK,DIVOWNVIEW,REPRICING
*RENAME_DIM DIVACCOUNT=ACCOUNT
*WHEN DIVACCOUNT
*IS *
*REC(DATASRC=DS_DIVROI,ENTITY=ENTITY.DIV_TO_REP,DIVACCOUNT=DIVACCOUNT.REPORT_ACC)
*ENDWHEN
*COMMIT

Hi Rajesh,
Something like:
*SELECT (%CATYP%,"[CAT_TYPE_CALC]","CATEGORY","[ID] = %CATEGORY_SET%")
*SELECT (%TIMMBERS%,"[ID]","TIME","[%CATYP%]='F'")
*SELECT (%DACMBERS%,"[ID]","DIVACCOUNT","[REPORT_ACC]<>'' AND [ID]<>'DA_221102' AND [CALC]='N'")
*XDIM_MEMBERSET BOOK=BAS(BK_ALL)
*XDIM_MEMBERSET DATASRC=BAS(DS_MGT_TOTAL)
*XDIM_MEMBERSET DETAIL=BAS(DT_ALL)
*XDIM_MEMBERSET DIVOWNVIEW=BAS(DO_TOT)
*XDIM_MEMBERSET REPRICING=<ALL>
*XDIM_MEMBERSET RPTCURRENCY=LC
*XDIM_MEMBERSET TIME=%TIMMBERS%
*XDIM_MEMBERSET TRNCURRENCY=BAS(TOTAL_CUR)
*XDIM_MEMBERSET FLOW=BAS(FL_CLO),FL_NONE,FL_AVG_CLO_ADJ
*XDIM_MEMBERSET DIVACCOUNT=%DACMBERS%,DA_221102
*DESTINATION_APP = Reporting
*SKIP_DIM = BOOK,DIVOWNVIEW,REPRICING
*RENAME_DIM DIVACCOUNT=ACCOUNT
*WHEN DIVACCOUNT
*IS %DACMBERS%
*REC(DATASRC=DS_DIVROI,ENTITY=ENTITY.DIV_TO_REP,DIVACCOUNT=DIVACCOUNT.REPORT_ACC)
*IS DA_221102
*WHEN FLOW
*IS <> FL_AVG_CLO_ADJ
*REC(DATASRC=DS_DIVROI,ENTITY=ENTITY.DIV_TO_REP,DIVACCOUNT=DIVACCOUNT.REPORT_ACC)
*ENDWHEN
*ENDWHEN
Vadim

How to add a cell from 2 different tables in 2 different Matrix(s) that reside on the same rdlc report?

Hello Community
    Using Visual Studio 2008 I have created a Windows Forms Application in which I created
Embedded Reports (rdlc).
    The embedded reports (rdlc) uses Matrix(s).
    Now on this one rdlc I have dragged 2 Matrix(s) onto the body.
    One of the Matrix datasource dataset name and table name is "DataSet1_Table1.
    A cells in the Matrix has a total column on the end as follows:
=FormatNumber(Sum(Fields!fld1.Value)+Sum(Fields!fld2.Value)+Sum(Fields!fld3.Value)+Sum(Fields!fld4.Value)+Sum(Fields!fld5.Value),"0")
    The other Matrix datasource dataset name and table name is "DataSet2_Table2.
    The cell in this Matrix has a total column on the end as follows:
=Sum(Fields!fld1.Value)+Sum(Fields!fld2.Value)+Sum(Fields!fld3.Value)+Sum(Fields!fld4.Value)+Sum(Fields!fld5.Value)
    As you can see each Matrix has a different table.
    I would like to add the total columns from each table in each Matrix but I haven't been
able to do it successfully. If I have to drag another Matrix or a Textbox on the
body to do it that is okay and/or add another/different formula to a cell onto the body that is
okay too.
    So my question is how can I add the contents of the total in cell from each table in each matrix
which will create the "grand total"?
    Thank you
    Shabeaut

It is possible to reference SSRS elements directly using the ReportItems collection. If your total tablix cell is outside of yoour matrix groups, you can use this collection to accomplish what you want:
=ReportItems!Matrix1Total.Value + ReportItems!Matrix2Total.Value
where Matrix1Total and Matrix2Total is the name of the cell that contains your totals. Note that for this to work, the cell name must be unique. If the total cell is inside a group, it will be repeated once for each instance of the group and will not be
unique.
You may be able to do it using the Sum aggregate and specifying the dataset for the scope variable:
=Sum(Fields!fld1.Value, "DataSet1")+Sum(Fields!fld2.Value,
"DataSet1")+Sum(Fields!fld3.Value,
"DataSet1")+Sum(Fields!fld4.Value,
"DataSet1")+Sum(Fields!fld5.Value,
"DataSet1")+Sum(Fields!fld1.Value,
"DataSet2")+Sum(Fields!fld2.Value,
"DataSet2")+Sum(Fields!fld3.Value,
"DataSet2")+Sum(Fields!fld4.Value,
"DataSet2")+Sum(Fields!fld5.Value,
"DataSet2")
This will work as long as you are not filtering the dataset in your Matrix properties. If you are, those
filters will not apply to this expression and the numbers will not total correctly.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

How to exclude a cell from a row in Report Painter

Similar Messages

Maybe you are looking for