How to Expire Large Files using File Server Resource Manager

Is there a way to expire Large Files over 2GB that have not been accessed in 2 years.
I see under the File expiration options that I can expire files that have not been Created, Modified, or Accessed for a certain amount of time.
Thanks,
Eddie

Hi Eddie,
FSRM can help report large files and also can help move old files to a folder, but I did not found a way to combine them in a single process.
Instead how about using Robocopy?
You can run robocopy /min:xxx /minlad:xxx <source> <target>.
/MIN:n :: MINimum file size - exclude files smaller than n bytes.
/MINLAD:n :: MINimum Last Access Date - exclude files used since n.
(If n < 1900 then n = n days, else n = YYYYMMDD date).
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

How to configure ex90 for use with polycom resource manager GAB

My customer has a Polycom infrastructure, including using Resource Manager for the GAB server. I also have several Cisco endpoints deployed (EX90 and C40) and I need to get these units configured to use the GAB. Polycom documentation sucks and only says:
1. At the endpoint, enter the information required for directory set up including the Polycom Global Address Book/RealPresence Resource Manager system IP address and the path.
For example, http://<RPRM_IP_ADDRESS>/TMS/Public/external/phonebook/PhoneBookService.asmx.
To do this on Cisco endpoints, go to System Configuration> Phone Book Server.
2. Wait for the connections to take effect
When I go to the EX90 phone book server setup page, I only have ID, Type and URL fields. The type field has a drop down that only has Cisco options available (VCS, TMS, Callway and CUCM)
No matter what combination I use, I haven't been able to get the EX90 to pickup the Polycom directory.
Any suggestions? Thanks

What happens when you try that URL (http://<RPRM_IP_ADDRESS>/TMS/Public/external/phonebook/PhoneBookService.asmx) from a Web Browser - do you see anything, or get an error?
You'll need to make sure that's accessible first before trying to configure your endpoints to use it.

How To split large message using File Adapter

Hello everyone,
Here is my scenario FTP > XI > BI.
I got 2 questions:
(1) I am getting large message around 70 MB file.
    How we can split the message into multiple files 10 MB each before processing the file into XI?
(2) Is there is any way we can find out size of file which is on FTP without contacting FTP admin?
    through XI before processing the file?
Thanks
Vick

hi vick,
check the blog
Zip or Unzip your Payload with the new PayloadZipBean module of the XI Adapter Framework
Working with the PayloadZipBean module of the XI Adapter Framework
SAP XI acting as a (huge) file mover
The specified item was not found.
Managing bulky flat messages with SAP XI (tunneling once again) - UPDATED
The specified item was not found.
regards
kummari

How to apply special right to the PDF file using the LiveCycle Rights Management Server.?

How to apply special right to the PDF file using the LiveCycle Rights Management Server.?
I want to edit bar code field data using Adobe Reader. Bar Code field was designed and data was changing using Acrobat X1 Professional (Trial Version). But can't do so in adobe reader.

I think that product has nothing to do with it. You would use LiveCycle Reader Extensions.

How to use quota on a desktop folder for all users with File Server Resource Manager.

Hi there,
I'd like to know if there is a posibility to use variables in the path with File Server Resource Manager if you want to set the quota.
The path I'd like to use is d:\home\%username%\desktop.
Like to hear from you all if there is a solution or workaround for this one :)
Thanks for your time.
Ben.
Ben van der Meer

That's a question about Automator, so I'd pop that one here
http://discussions.apple.com/forum.jspa?forumID=1339
Regards
TD

How to read pdf file using file adapter

Hi..
How to read pdf file using file adapter?
regards
Arun

Hi
This may help you
/people/sap.user72/blog/2005/07/27/xi-generate-pdf-file-out-of-file-adapter
/people/alessandro.guarneri/blog/2007/02/21/sap-xi-acting-as-a-huge-file-mover
---Ram

File server resource manager. Block file types based on size

I have a site where our users appear to be saving some pretty huge TV quality video files (usually .MOV, and usually over 900MB in size) to our file storage server. The
concern I have is that such large files are going to fill up our server we will run out of space .
I don't want to blanket block smaller (less than 30MB) .MOV video files from being saved
to the drive, so would like to know if there's any feature in the File server resource manager that can block file type based on size.
If it's not possible, then could someone please suggest this as a future feature of FSRM as I'm sure there are plenty of companies out there who face the same problem as me.
thanks,
Mike Geileskey
Infrastructure manager, PIAS UK Limited

Hi,
We could not block file types based on size by using FSRM. As a workaround you could use disk quotas on NTFS Volumes which are tracked on a per-user.
To apply disk quotas to existing volume users, add new quota entries in the Quota Entries window. Please understand that it will take you some time to add all users into the list.
It will allow administrators to control the amount of data that each user can store on an NTFS file system volume.
For more detailed information about disk quotas on NTFS Volumes, you could refer to the article below:
File Systems
http://technet.microsoft.com/en-us/library/cc938945.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to add File Server Resource Manager Tools on Windows Server 2012 - Errors on restart and roll back install

Unable to install Windows Server 2012 Feature - [Tools] File Server Resource Manager Tools.
Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
Does anyone have any idea's on why this Feature can not be installed ??
Scott

Hi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started?

File Server Resource Manager 2012 - Fails to generate storage report - Event ID: 8242 and 602

Installed file server resource manager roll on new 2012 file server.   When I attempt to run a dup report on the local volume, I received an error message: "the report generation task failed with the following errors: Error generating report
job with task name". "
Event ID 8242 and 602 are logged in the event viewer.
Log Name:      Application
Source:        SRMSVC
Date:          6/24/2013 11:11:03 AM
Event ID:      8242
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      xxxxxxxxxxxxxxxxx
Description:
Reporting or classification consumer '' has failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SRMSVC" />
    <EventID Qualifiers="32772">8242</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-06-24T16:11:03.000000000Z" />
    <EventRecordID>1276</EventRecordID>
    <Channel>Application</Channel>
    <Computer>xxxxxxxxxx</Computer>
    <Security />
</System>
<EventData>
    <Data>
    </Data>
    <Data>
Error-specific details:
   Error: (0x80131501) Unknown error</Data>
    <Binary>2D20436F64653A20434E534D4D4F444330303030303234332D2043616C6C3A20434E534D4D4F444330303030303231322D205049443A202030303030333036302D205449443A202030303030333734382D20434D443A2020433A5C57696E646F77735C73797374656D33325C73726D686F73742E657865202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820</Binary>
</EventData>
</Event>
Log Name:      Application
Source:        SRMREPORTS
Date:          6/24/2013 11:11:03 AM
Event ID:      602
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      xxxxxxxxxxxxxxxxxxxx
Description:
Error generating report job with the task name ''.
Context:
- Exception encountered = System error.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SRMREPORTS" />
    <EventID Qualifiers="0">602</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-06-24T16:11:03.000000000Z" />
    <EventRecordID>1277</EventRecordID>
    <Channel>Application</Channel>
    <Computer>xxxxxx</Computer>
    <Security />
</System>
<EventData>
    <Data>Error generating report job with the task name ''.
Context:
- Exception encountered = System error.
</Data>
</EventData>
</Event>
When I click on schedule a new report task, I get an error "Class not registered".
nada

Hi,
When we schedule a new job, we add a scheduled task to the c:\windows\tasks folder.
The scheduled task will contain the following command line
"c:\WINDOWS\system32\storrept.exe reports generate /scheduled /Task:"FSRM_Report_Task{GUID.......}"
There is also a folder on the system drive
C:\StorageReports\Scheduled
We Also store information in the system volume information folder in the following files:
c:\system Volume Information\SRM\Settings\ReportSettings.xml (we use .old and .alt extentions}
c:\system Volume Information\SRM\reports\reportX.xml (where X = an incrementing number set, in writing to these files, we also use .old and .alt extentions}
When experiencing issues relating to scheduled report jobs, you will want to examine these files and check for NTFS permissions issues on these locations also.
Make sure you check the volume that you will be running the report on.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

File Server Resource Manager will not load WMI Objects on Windows 8.0/8.1 Preview with Hyper-V and Server Tools Loaded

Hi Folks,
I have a problem getting "File Server Resource Manager" to start properly because WMI objects are not loading??? I don't understand this at all because I am able to access them with other Apps, etc. I have been over my Services list as well but
have not yet discovered which Service turns on/off "File Server Resource Manager". I have looked in Windows\System32\ and I can not find SrmSvc. I found other Srm's there though. I also found the FSRM Snapin which generates the Figure below but I
can not find it in the WMI Browser. I believe the Firewall is OKAY since I have been over that thoroughly. I do have the Server Tools Installed for Windows 8.0 or Windows 8.1 Clients as well as the Windows Updates applied, which is where I got "File Server
Resource Manager" in the first place. I have had WMI and Powershell 3.0 Package, installed since Windows 7 but I run a repair on them anyway.
I have read through "File Server Resource Manager could not load WMI objects on Windows Server 2012
Article ID: 2831687" but since I don't seem to have SrmSvc the solution doesn't help me. I haven't been able to find a similar one for the Windows Client.
If there is anything you could share on this problem I would be much obliged.
Thanks again,
Crysta
PhotM Phantom of the Mobile

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

List files using file adapter in 10G

Hi',
How can we list the files using File/FTP adapter in SOA 10G.
My requirement is to get details like name of file and the timestamp.
Please advice.
Thanks
Yatan

Yatan,
I used in the past a javaEmbedded activity which uses a shell script to list and get all the needed data from a directory.
(I found it the easiest and faster way to do it)
Arik

Creating PDF files using file adapter

Hi,
Is it possible to create a pdf file using, File/FTP adapter? If yes can someone please suggest how to do it.
Thanks,
Phani

Hi Phani,
I would say pdf files are binary files with a specialized format.
You can move pdf files through BPEL or ESB (i.e. file/ftp -> file/ftp), or from file to database BLOB and database to file, by importing the schema as opaque.
However I doubt that file adapter can create PDF files from a plain-text xml file, i.e. as PDFCreator would.
In a sense a pdf file is much like a jpg, mp3, or zip file, it can be passed through bpel but not created.
In other words if you have a base64Binary element in xml, that you know is the complete bytes to a pdf, jpg, or other file, you can write it out as a file using the File adapter.
Thanks
Steve

Reading Multiple lines in a file Using File Adapter

Hi All,
Iam new to this technology.How to read multiple lines in a file using file adapter.Brief me with the methodology.

I didn't look at anything else but if you want to write more than one line ever to your file you should change this
out = new FileOutputStream("Calculation.log");to this...
out = new FileOutputStream("Calculation.log",true);A quick look at the API reveals the follow constructor FileOutputStream(File file, boolean append) append means should I add on the end of the file or over-write what is there.
By default you over-write. So in our case we say true instead which says add on to what is there.
At the end of that little snippet you shoudl be closing that stream as well.
So where you have
p.close();You should have
p.close();
out.close();

Reading .pdx file using File Adapter

Hi,
I have .pdx file in the input directory of my BPEL process .Also i have the DTD of the pdx file.Using file Adapter wizard i converted tht DTD to the XSD.Now when I run my BPEL process i am getting this error.
Failed to translate file : {C:\OraBPELPM_1\integration\jdev\jdev\mywo
rk\TestWs\readPDX\inputDr\agile_20070621_050222833.pdx}
<2007-07-06 23:08:38,137> <INFO> <default.collaxa.cube.activation> <File Adapter
::Inbound> Sending message to Adapter Framework for rejection to user-configured
rejection handlers : {
file=C:\OraBPELPM_1\integration\jdev\jdev\mywork\TestWs\readPDX\inputDr\agile_2
0070621_050222833.pdx, Exception=ORABPEL-11207
IO Failure in translator.
IO failure because the translator failed to SAX Parse InputStream .
Check the error stack and fix the cause of the error. Contact oracle support if
error is not fixable.
<2007-07-06 23:08:38,138> <WARN> <default.collaxa.cube.activation> <AdapterFrame
work::Inbound> [Read_ptt::Read(ProductDataeXchangePackage)] - onReject: The reso
urce adapter 'File Adapter' requested handling of a malformed inbound message. H
owever, the following bpel.xml activation property has not been defined: 'reject
edMessageHandlers'. Please define it and redeploy the business process. Will use
the default Rejection Directory file://C:\OraBPELPM_1\integration\orabpel\domai
ns\default\archive\jca\readPDX\rejectedMessages for now.
<2007-07-06 23:08:38,138> <WARN> <default.collaxa.cube.activation> <AdapterFrame
work::Inbound> [Read_ptt::Read(ProductDataeXchangePackage)] - onReject: Sending
invalid inbound message to Exception Handler:
<2007-07-06 23:08:38,138> <INFO> <default.collaxa.cube.activation> <AdapterFrame
work::Inbound> Handing rejected message to DEFAULT rejection handler: file://C:\
OraBPELPM_1\integration\orabpel\domains\default\archive\jca\readPDX\rejectedMess
ages since none of the configured rejection handlers [] succeeded.
<2007-07-06 23:08:38,142> <INFO> <default.collaxa.cube.activation> <File Adapter
::Inbound> Deleting file : C:\OraBPELPM_1\integration\jdev\jdev\mywork\TestWs\re
adPDX\inputDr\agile_20070621_050222833.pdx after processing.
Can somebody help me to find how to rectify this?
Thanks in Advance

Hi Anirudh,
Please have a look at the answers for ur questions:
(1)Is it a .pdf file?
its a .pdx file.This file is generated from Agile PLM side.It consists of DTD information and the actual xml.If i rename it to .xml then its working fine.But i would be getting this file in .pdx format
(2)Its size?
It can be 73 MB
(3)Using a file adapter to pick the file?
Yes
(4)Picking from the local box or a remote one?
For the time being i am picking it up from the local box.But going fwd it shld be from remote
(5)Any firewall being used?
No
(6)Is the schema correct and confirming with right namespaces?
Yes
(7)BPEL version?
10.1.2
Thanks
Cheers
Anirudh Pucha

Delete file using file adapter

Hi,
How can we delete a file using file adapter, I am using SOA 11g R3.
Thanks
Yatan

thanks for reply,
What I am trying to do is to only delete the file, is there some way where we can simply do a "delete", instead of first reading a file and then deleting it.
Thanks
Yatan

Appending XML data to a file using file adaptor

Hi,
I am trying to append data to a file using file adaptor in XML format. (Objective is to store data as XML message in the file). I understand it is possible to append data to an existing file by making appropriate changes in WSDL manually. However, my issue is every time the XML data is appended to a file even the XML header message is also getting appended. As a result the file data does not adhere to defined schema structure anymore.
Is there a way to save XML data in a file in append mode ?
Thanks, Riz

I am having the same issue as well, which makes the output XML an invalid one. I have an XSD that has a hierarchy of elements. whenever I am wiriting the child elements the header message & the name space is also getting written. For example
<?xml version="1.0" ?><Parent xmlns="http://testSchema.com/outputSchema">
<StartDate>01/01/2001</StartDate>
<EndDate>01/30/2001</EndDate>
<Child/>
</Parent>
<?xml version="1.0" ?><Child xmlns:ns1="http://testSchema.com/outputSchema">
<ns1:Id>20012981</ns1:Id>
<ns1:Value/>
<ns1:Date>01/15/2001</ns1:Date>
</Child>
<?xml version="1.0" ?><Child xmlns:ns1="http://testSchema.com/outputSchema">
<ns1:Id>20012981</ns1:Id>
<ns1:Value/>
<ns1:Date>01/15/2001</ns1:Date>
</Child>
I am using a onefile adapter partnerlink to write the parent & an another one for writing the child element, since the child elements will repeat more than once. One other way to fix this issue is write the data using java embedded activity, but that would need a lot of boiler plate code, for writing/reading/appending the same file & for handling all those IOexceptions & buffer IN/outs. I am curious if someone had the same issue & how they resolved it.

How to Expire Large Files using File Server Resource Manager

Similar Messages

Maybe you are looking for