How to export MIDI type 0

I am using LP 9. I am able to successfully export type 1. I don't understand how to switch settings to type 0.
For me, a new user, the information I have read on this topic too cryptic for my brain.
Thanks in advance.

Not sure what you mean by "Tempo Alternative", but a standard MIDI file includes all tempo information, whether it's a static tempo throughout the song, or an intricate tempo map. It's all included.
As to "how"... simply utilize the "Export as MIDI file" function, found under the Export options in the File menu.

Similar Messages

  • How to export midi file wih song tempo alternative ?

    can I export Midi File that including song tempo alternative in it?
    Please Tall Me How to do that Thanks

    Not sure what you mean by "Tempo Alternative", but a standard MIDI file includes all tempo information, whether it's a static tempo throughout the song, or an intricate tempo map. It's all included.
    As to "how"... simply utilize the "Export as MIDI file" function, found under the Export options in the File menu.

  • How to: export 4:2:0 MPEG2 for Visual Circuits Firefly MC

    I am trying to make a series of videos for a multi-channel media player called FireFly MC by Visual Circuits. It plays on 3 monitors and I am trying to make a multi screen presentation to give the illusion that it spans all 3 at times and the goes back to individual montors and back or whatever.
    Every time i export and MPEG2 from Premiere Pro and play it on the system, there are tons of artifacts. and color changes to B & W and back to color.
    There is a manual online, but the encoding requirements are not really something i am altogether familiar with.
    Here are some:
    1. Files must be program stream MPEG2 or system stream
    MPEG1 of audio/video, or elementary stream MPEG2 or
    MPEG1 of video only or audio only.
    2. Use 4:2:0, not 4:2:2 encoding.
    3. In MPEG-2, both audio and video fields should be encoded.
    This is the normal default.
    4. Audio only (Dolby Digital or MPEG Layer 2) files cannot be
    mixed with files containing videos (MPEG, MPEG2 program
    stream, video only).
    5. Firefly – Standard IDE Hard Drive): The total bit rate of a
    Firefly player must not exceed 40 mbps across four channels
    (i.e. averaging 10 mbps per channel). Channels may be
    encoded at different bit rates (up to 15 mbps on a given
    channel) as long as 40 mbps is not exceeded across a single
    hard drive (4-channel player).
    6. The presentation time stamp (PTS) values contained in the
    audio and video streams in a file must be continuous and
    increasing. In particular, the PTS values should not reset to 0 at
    any point in the file. The time between the first and last time
    stamps in a file should reflect the actual duration of the file.
    7. Files should be no less than 4 megabytes in size. If some of
    your files are smaller than 4 megabytes, use an editor to
    combine the files to create a single file at least 4 megabytes in
    size.
    8. Files should be no larger than 2 gigabytes in size.
    Anyone ever work with this system or know how to export this type of file?
    Thx in advance.

    Hi Jim, I too am confused!
    Why should the video codec for Option 1 be V210? Isn't this reserved for 10-bit video?
    http://www.fourcc.org/yuv.php#V210
    http://help.adobe.com/en_US/premierepro/cs/using/WS398C372B-B748-4ef6-BA0D-396D2E360707.ht ml
    I would have thought that the UYVY option was the correct choice for 8-bit video.
    http://www.fourcc.org/yuv.php#UYVY
    Videos exported using Option 2 definately do not play correctly in Windows Media Player - I get no video, just audio. I have tried many different computers running different versions of Windows and Windows Media Player. I'm running Premiere CS5 v5.03 if that makes any difference.
    I don't understand why videos from Option 1 play fine in Windows Media Player even though the systems don't have AJA hardware installed (or any video I/O device) - they are just plain vanilla office PCs

  • How to export oracle table?

    Does anybody knows how to export oracle table into sql format? I know by using PL/SQL Developer can do it,but I have a table,it contains a column,it's type is LONG,PL/SQL can't export it! How to export long type table into sql format?
    Any idea will be appreciated!

    My table structure is follows:
    create table MyDates
    COL1 LONG,
    COL2 VARCHAR2(20)
    In column col1,I store some date in it,then I want to export this table,but I don't want to export this table into dmp file,I only want to export this table' structure and export it into SQL File,such export filename is mydata.sql
    I don't know how to export this table's structure? Because it contains LONG type column.How to export it? By the way,would you tell me how to export other type table,such as it contains column type is blob?

  • QT7 won't play MIDI type-1 files exported from ProTools7

    That's as simple as I can put it. If you try to export a type-1 MIDI file from ProTools 7, and you try to open it with QT7, you wind up with a big empty file that is invariably 11 hours, 55 minutes and 40 seconds long. And your MIDI data (music) is nowhere to be found within that space...but then, I haven't sat there for the entirity of the 12 hours to make completely sure!
    I talked it out with PT tech support and they got the same results. So here we are, scratching our heads.
    The funny thing is, if you take that wonky 12-hour MIDI file you just exported and re-import it back into ProTools, everything is perfectly fine. The track is it's normal length and all the parts are there.
    ALSO, you can export a type-O MIDI file from ProTools and QT will play THAT just fine, but there's something about type-q that throws it for a loop! And nobody botyher telling me to just stick with type-0! I need to be able to export BOTH for my line of work, so this is a major setback, ESPECIALLY since I can't revert to QT6 on account of I've gone Tiger.
    I know nobody will have an answer, but I just wanted to put this out there in the hopes this issue will get remedied down the road.
    Powermac G4 dual 1G   Mac OS X (10.4.3)  

    I'm having pretty much the exact same problem.
    The .mov file was created on a MacBook Pro 15" (4mths old), then copied to my MacBook, which has Snow Leopard on it. The file works fine on the MBP and on the iMac at work but not on my MB, it comes up that same message stating that QT doesn't recognise the file format. On my partners MB, which is running Tiger and QT 7.6.4 the video doesn't work but I can hear the audio, so I'm confused to say the least and looking forward to a response from any one out there.....please.

  • ST03 Export: How to export all instances and task types?

    I am exporting ST03 data using SAP GUI
    I can export data for a single task type and a single instance.Is there a way I can export the Time Profile data for all instances and all task types in a single export? Can I do a single export rather than NxM exports?
    Also, when I export to a text file, there is a header that reports the instance, data, and task type. When I export to excel file I only get the table, not the header info. Is there a way to to get the header info into the excel export?
    Is this the appropriate forum for these questions?
    Any help is appreciated.
    Thanks.
    Tim

    I moved this question to an ABAP forum. Here's the [thread|ST03 Export: How to export all instances and task types?;.
    Tim

  • Hey guys, my question is how can I export midi files from new garageband 10/ 2013? Thanks

    Hey guys, my question is how can I export midi files from new garageband 10/ 2013? Thanks

    77music wrote:
    how can I export midi files from new garageband 10/ 2013?
    unfortunately, like the previous 6 versions of GB, MIDI export is not supported. you would need to open the file in Logic in order to do that

  • How to export the data to a  Excel file

    Hi all,
    How to use the  'EXCEL_OLE_STANDARD_DAT'
    to export the data from itab to EXCEL file.
    REPORT  ZT11.
    data : begin of itab occurs 0,
          t1(3)  type c  value 'sag',
          t2(3)  type c value 'ntc',
          end of itab.
          append itab.
          write : itab-t1,itab-t2.
          CALL FUNCTION 'GET_FIELDTAB'
          EXPORTING
            LANGU                     = SY-LANGU
            ONLY                      = ' '
            TABNAME                   = ' '
            WITHTEXT                  = 'X'
          IMPORTING
            HEADER                    =
            RC                        =
            TABLES
              FIELDTAB                  =
          EXCEPTIONS
            INTERNAL_ERROR            = 1
            NO_TEXTS_FOUND            = 2
            TABLE_HAS_NO_FIELDS       = 3
            TABLE_NOT_ACTIV           = 4
            OTHERS                    = 5
          IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
          CALL FUNCTION 'EXCEL_OLE_STANDARD_DAT'
            EXPORTING
              FILE_NAME                       =
            CREATE_PIVOT                    = 0
            DATA_SHEET_NAME                 = ' '
            PIVOT_SHEET_NAME                = ' '
            PASSWORD                        = ' '
            PASSWORD_OPTION                 = 0
          TABLES
            PIVOT_FIELD_TAB                 =
            DATA_TAB                        =
            FIELDNAMES                      =
          EXCEPTIONS
            FILE_NOT_EXIST                  = 1
            FILENAME_EXPECTED               = 2
            COMMUNICATION_ERROR             = 3
            OLE_OBJECT_METHOD_ERROR         = 4
            OLE_OBJECT_PROPERTY_ERROR       = 5
            INVALID_PIVOT_FIELDS            = 6
            DOWNLOAD_PROBLEM                = 7
            OTHERS                          = 8
          IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.

    Hi, you can even use control technology. There are several example programs how to export data to excel. Please go to transaction SE80. Choose enviroment->examples -> control examples.  Take a look at office integration.
    /Ernesto

  • How to export internal table and pass the internal table to another screen?

    Hi,
    I have a sql SELECT statement that select data from table into internal table. I would like to export out the internal table and pass to another screen and display the data in ALV list. How to export it out? I try but the error given was " The type of "OUT_SELECT_ITAB" cannot be converted to the type of  "itab_result".
    Another question is, how to pass the internal table that i export out from the function module to another screen?
    Here is the code
    ==============================================================
    FUNCTION ZNEW_SELECT_ZSTUD00.
    ""Local Interface:
    *"  IMPORTING
    *"     REFERENCE(IN_SELECT_YEAR) TYPE  ZSTUD00-EYEAR
    *"  EXPORTING
    *"     REFERENCE(OUT_RESULT) TYPE  CHAR9
    *"     REFERENCE(OUT_SELECT_ITAB) TYPE  ZSTUD00
    *& Global Declarations
    DATA: itab TYPE ZSTUD00,
          itab_result TYPE TABLE OF ZSTUD00.
    *& Processing Blocks called by the Runtime Environment
    itab-eyear = IN_SELECT_YEAR.
    SELECT *
    FROM ZSTUD00
    INTO TABLE itab_result
    WHERE eyear = IN_SELECT_YEAR.
    IF sy-subrc = 0.
      out_result = 'Success'.
      OUT_SELECT_ITAB = itab_result.
    ELSE.
      out_result = 'Fail'.
    ENDIF.
    ENDFUNCTION.
    ===============================================================
    Please advise. Thanks
    Regards,
    Rayden

    Hi Nagaraj,
    I try to change it in Tables tab page but it state that TABLES parameters are obsolete. when i "Enter". I try to "Enter" again. it seem to be ok but it stil give me the same error.
    ================================================================
    FUNCTION ZNEW_SELECT_ZSTUD00.
    ""Local Interface:
    *"  IMPORTING
    *"     REFERENCE(IN_SELECT_YEAR) TYPE  ZSTUD00-EYEAR
    *"  EXPORTING
    *"     REFERENCE(OUT_RESULT) TYPE  CHAR9
    *"  TABLES
    *"      OUT_SELECT_ITAB STRUCTURE  ZSTUD00
    *& Global Declarations
    DATA: itab TYPE ZSTUD00,
          itab_result TYPE TABLE OF ZSTUD00.
    *& Processing Blocks called by the Runtime Environment
    itab-eyear = IN_SELECT_YEAR.
    SELECT *
    FROM ZSTUD00
    INTO TABLE itab_result
    WHERE eyear = IN_SELECT_YEAR.
    IF sy-subrc = 0.
      out_result = 'Success'.
      OUT_SELECT_ITAB = itab_result.
    ELSE.
      out_result = 'Fail'.
    ENDIF.
    ENDFUNCTION.
    ===============================================================
    regards,
    Rayden

  • How to Export UYVY 4:2:2 8-bit Uncompressed AVI?

    I've been doing a lot of testing in Premiere Pro CS5 (on Windows) but cannot figure out how to export video to a generic 4:2:2 8-bit uncompressed AVI file. Here's some background - I've captured some video to an uncompressed Matrox AVI file (via an MXO2 I/O Device). Now I've done some simple cutting and need to get the video off Premiere's timeline (and into another yet-to-be-determined multimedia application). I don't want to lose any quality - hence my requirement for 4:2:2 uncompressed AVI. Also, the file needs to be a standard/generic AVI that doesn't require any special CODECs installed.
    In Premiere's File > Export > Media window, there seems to be 2 ways of getting uncompressed 4:2:2 AVIs:
    Option 1:
    Format: Uncompressed Microsoft AVI
    Video Codec: UYVY
    Quality: 100
    Width: 720
    Height: 576
    Frame Rate: 25
    Field Type: Upper First
    Aspect: PAL (1.0940)
    Audio Codec: Uncompressed
    Sample Rate: 48000 Hz
    Channels: Stereo
    Sample Type: 16 bit
    Option 2:
    Format: Microsoft AVI
    Video Codec: Uncompressed UYVY 422 8bit
    Quality: (Greyed out at 100)
    Width: 720
    Height: 576
    Frame Rate: 25
    Field Type: Upper First
    Aspect: PAL (1.0940)
    Audio Codec: Uncompressed
    Sample Rate: 48000 Hz
    Channels: Stereo
    Sample Type: 16 bit
    Audio Interleave: 0
    Option 1 is great except that the audio codec detected is "0xfffe extensible wave format" (according to GSpot). I can play the video on practically any machine including something as old as Windows Media Player 9 running on Windows 2000! The audio plays back fine as well in Windows Media Player. However, audio does not play (not detected correctly) in VLC media player, or in Sony Vegas-type software. FYI, the video codec detected (by GSpot)  is "UYVY (packed 4:2:2)".
    Option 2, on the other hand, is quite the contrary. The video does not play in any version of Windows Media Player (regardless of operating system), but the audio plays fine though. The audio codec detected (according to GSpot) is the standard "PCM audio" format and the video codec is again "UYVY (packed 4:2:2)". In VLC media player, both the video and audio play fine. But in other editing software such as Edius, the video is not detected and only the audio is loaded onto the timeline.
    What I would like is a generic 4:2:2 uncompressed AVI file which has audio that works in anything. Is there some setting/parameter that I have missed? Can I customise Option 1 with "PCM audio" rather than "0xfffe extensible wave format"? I want to avoid "Video Codec: None" if at all possible given that the file size will be significantly larger for absolutely no quality gain (I presume this is uncompressed 4:4:4?).
    Any suggestions would be most welcome.

    Hi Jim, I too am confused!
    Why should the video codec for Option 1 be V210? Isn't this reserved for 10-bit video?
    http://www.fourcc.org/yuv.php#V210
    http://help.adobe.com/en_US/premierepro/cs/using/WS398C372B-B748-4ef6-BA0D-396D2E360707.ht ml
    I would have thought that the UYVY option was the correct choice for 8-bit video.
    http://www.fourcc.org/yuv.php#UYVY
    Videos exported using Option 2 definately do not play correctly in Windows Media Player - I get no video, just audio. I have tried many different computers running different versions of Windows and Windows Media Player. I'm running Premiere CS5 v5.03 if that makes any difference.
    I don't understand why videos from Option 1 play fine in Windows Media Player even though the systems don't have AJA hardware installed (or any video I/O device) - they are just plain vanilla office PCs

  • ALV Graphs: How to set line type graph as default graph

    Hi All,
    I need to develop a line graph. The fields on the X-axis will change dynamically. Some times they may be 10 field and some times they may be more than 100 fields. I tried with Function Module GFW_PRES_SHOW_MULT. But I can only display maximum 32 fields. Can anyone tell me exact program which helps me to full fill my requirement. It will be a great help if you could told how do display line type graph as default graph in ALV.  In REUSE_ALV_GRID_DISPLAY there is a Exporting parameter MT_CHART_TYPES but this help you only to enter description for X-axis and Y-axis.
    Many thanks in advance.

    I would call GRAPH_MATRIX_2D with options depending on representation you wish
    look at the program GRBUSG_1 to see how to use it
    there you have some options to display bar chart, but you could use other values (complete list of options is available in documentation of function module GRAPH_MATRIX_2D - click on parameter OPTS in help display to see full explanation)
    exemple:
    P2TYPE = LN to display lines

  • How to export only selected columns of WD ALV to excel

    Hi,
    I have WD ALV report with EXPORT button (since standard button was not working properly i just hide that and added custom one) & standard dropdown to choose layout. Out of 20 columns user may choose n number of columns, the same number of columns i need to transfer to xls. How to export only selected columns to xls. Any method or FM to filter number of columns being transfer to xls. please advise
    Rgds
    sudhanshu

    Hi,
    Where exactly we are (or going to be) using this reference i.e., CL_SALV_WD_CONFIG_TABLE. Im passing contents, filename & MIME type as:
    call function 'SCMS_STRING_TO_XSTRING'
        exporting
          TEXT   = TEXT
        importing
          BUFFER = XTEXT.
    WDR_TASK=>CLIENT_WINDOW->CLIENT->ATTACH_FILE_TO_RESPONSE(
    **path to the word file
        I_FILENAME = 'WDP.xls'
    String Variable
        I_CONTENT =  XTEXT
    File Type
        I_MIME_TYPE = 'EXCEL' ).
    In CL_SALV_WD_CONFIG_TABLE we have few methods related to column settings however not sure where exactly we will be using this class reference. can you please give some idea so that i can do some r&d in that.
    Rgds
    Sudhanshu

  • How to export usb controller custom assignment settings to another computer

    Hello everybody 
    is there any way to export Logic 9's USB controller assignments to another computer setup, to work with same controllers bought from a local music store, with even up to 7 usb controllers in one setup? This way, with a preference export file type of method, time would be saved lightyears by just choosing some "import settings file" function and *click*, every pot in those multiple controllers would do the intended function on the other system too.
    Example scenario,
    computer 1)  MacBook + 7 different usb controllers wanted to by exported assignment-wise (2 x Behringer BCF2000 and 3 x BCR2000, Presonus Faderport and Novation Nocturn
    computer 2)  MacBook Pro + 7 different usb controllers wanted to be exported assignment-wise (2 x Behringer BCF2000 and 3 x BCR2000, Presonus Faderport, Novation Nocturn + some other random USB controller in the chain also (wanted to be left outiside any assignment compromises)
    I don't know what information of controller devices Logic saves into different files for recalling purposes, and how accurate device-identifying-wise the assignment files are, but how could I make "computer 2" controllers do the same fader/vpot/button functions as on "computer 1" using those same products over there, and still leave that existing extra eight'd controller on "computer 2" left as it is/was?
    Ps. If there IS a file exportable for instant multi-controller configuring this scale, does the actual physical connecting order into USB hubs (all these devices could even by connected via single USB-hub cable into MacBook?) change the file's workability, I mean if I'd swap a few controllers into each other's places on the USB hub, would that smoke that preference file's workability whole together then?
    THANKS for every reply, Really, REALLY, appreciate it
    - Aleksi Bovellan
    Finland
    www.glideslope.me
    PS. Sorry if this was confusing or "hard to read" in some way, I really tried my best to include every possible information of problem to save the time to resolve it..!

    Hi
    Have you tried copying the Control Surfaces preferences from 1 Mac to the other?
    <User>:Library:Preferences
    com.apple.logic.pro.cs
    Note that the User Library is hidden bt default in Lion/M Lion: use the Finder:Go menu whilst holding down Option to get there
    CCT

  • How to export and Import table of another user from user system using expdp

    Hi All,
    How to export a table 'scott.emp' from system user.
    expdp system/password directory=expdp dumpfile=scott_emp.dmp ???? ?? tables=emp ??????????????????????????
    thank you
    ---------------------------------------------------------- Posting solution here to make needed users not to scroll down ------------------------------------------------------
    Finally I got it right!!!
    Task :- Export table_1 of schema_a from database db1 and Import it to schema_b of database db2 as user other than schema owner
    Solution :-
    expdp system/pwd directory=expdp tables=schema_a.table_1 dumpfile=schema_a.table_1.dmp logfile=expdp_schema_a.table_1.log
    impdp system/pwd directory=expdp tables=schema_a.table_1 dumpfile=schema_a.table_1.dmp logfile=impdp_schema_a.table_1.log remap_schema=schema_a:schema_b remap_tablespace=table_1_tablespace:schema_b_tablespace
    Thank You All
    Edited by: Ven on Mar 9, 2011 7:52 AM

    Just a example
    SQL> $expdp system/sys directory=data_pump_dir dumpfile=tests.dmp tables=scott.emp
    Export: Release 11.2.0.1.0 - Production on Tue Mar 8 10:39:57 2011
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Starting "SYSTEM"."SYS_EXPORT_TABLE_01": system/******** directory=data_pump_dir dumpfile=tests.dmp tables=scott.emp
    Estimate in progress using BLOCKS method...
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    Total estimation using BLOCKS method: 64 KB
    Processing object type TABLE_EXPORT/TABLE/TABLE
    Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
    Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
    Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
    . . exported "SCOTT"."EMP" 8.570 KB 14 rows
    Master table "SYSTEM"."SYS_EXPORT_TABLE_01" successfully loaded/unloaded
    Dump file set for SYSTEM.SYS_EXPORT_TABLE_01 is:
    C:\APP\MAZAR\ADMIN\ACEME\DPDUMP\TESTS.DMP
    Job "SYSTEM"."SYS_EXPORT_TABLE_01" successfully completed at 10:40:01
    SQL>

  • How to export a user and their schema from one 10g database to another?

    Hi,
    I would like to export a user and their entire schema from one 10g database to another one. How do I do this?
    thx
    adam

    If you want to export a user and the schema owned to the user, and import to the same user in a different database, or a different user in the same database, you can use the exp and imp commands as described in the Utilities manual.
    These commands are very versatile and have a lot of options - well worth learning properly. To give you a simplistic shortcut, see below - I create a user 'test_move', create some objects in the schema, export, create a new user in the database 'new_move' and import.
    oracle@fuzzy:~> sqlplus system/?????
    SQL*Plus: Release 10.2.0.1.0 - Production on Sat Mar 11 21:46:54 2006
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    SQL> create user test_move identified by test_move;
    User created.
    SQL> grant create session, resource to test_move;
    Grant succeeded.
    SQL> connect test_move/test_move
    Connected.
    SQL> create table test (x number);
    Table created.
    SQL> insert into test values (1);
    1 row created.
    SQL> exit
    Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    oracle@fuzzy:~> exp system/????? file=exp.dmp owner=test_move
    Export: Release 10.2.0.1.0 - Production on Sat Mar 11 21:48:34 2006
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    Export done in AL32UTF8 character set and AL16UTF16 NCHAR character set
    About to export specified users ...
    . exporting pre-schema procedural objects and actions
    . exporting foreign function library names for user TEST_MOVE
    . exporting PUBLIC type synonyms
    . exporting private type synonyms
    . exporting object type definitions for user TEST_MOVE
    About to export TEST_MOVE's objects ...
    . exporting database links
    . exporting sequence numbers
    . exporting cluster definitions
    . about to export TEST_MOVE's tables via Conventional Path ...
    . . exporting table                           TEST          1 rows exported
    . exporting synonyms
    . exporting views
    . exporting stored procedures
    . exporting operators
    . exporting referential integrity constraints
    . exporting triggers
    . exporting indextypes
    . exporting bitmap, functional and extensible indexes
    . exporting posttables actions
    . exporting materialized views
    . exporting snapshot logs
    . exporting job queues
    . exporting refresh groups and children
    . exporting dimensions
    . exporting post-schema procedural objects and actions
    . exporting statistics
    Export terminated successfully without warnings.
    oracle@fuzzy:~> sqlplus system/?????
    SQL*Plus: Release 10.2.0.1.0 - Production on Sat Mar 11 21:49:23 2006
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    SQL> create user new_move identified by new_move;
    User created.
    SQL> grant create session, resource to new_move;
    Grant succeeded.
    SQL> exit
    Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    oracle@fuzzy:~> imp system/????? file=exp.dmp fromuser=test_move touser=new_move
    Import: Release 10.2.0.1.0 - Production on Sat Mar 11 21:50:12 2006
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    Export file created by EXPORT:V10.02.01 via conventional path
    import done in AL32UTF8 character set and AL16UTF16 NCHAR character set
    . importing TEST_MOVE's objects into NEW_MOVE
    . . importing table                         "TEST"          1 rows imported
    Import terminated successfully without warnings.
    oracle@fuzzy:~>                                                       If moving between databases, remember to set the SID properly before the import. If keeping the same userid, skip the from/to stuff in the import.
    There are many variations on the theme ...
    You can simplify this. You can select tables individually. You can use a parameter file. You can transport all the constraints and data. You can skip the data and only move the definitions. You can get some help (imp/exp help=yes).
    And, if it's all 10g, there is a new and improved facility called expdp/impdp (dp = data pump) which has a lot more capability as well, including direct transfer (no intermediate file) together with suspend/restart. Also documented in the Utilities manual.

Maybe you are looking for