How to extract hyperion planning metadata to sql by ODI?

I don't find any LKM for that. How to achieve it? I just wonder why Oracle doesn't provide it ?

Hi,
No you can't directly extract metadata from planning, this follows on from the HAL days where you couldn't do it either.
It is possible to extract the dimension information from essbase which is nearly the same, it just needs a bit of transformation.
I did write a couple of blogs covering this area, try [here |http://john-goodwin.blogspot.com/2008/12/odi-series-essbase-to-planning.html] and here
Ok?
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • How to delete Hyperion Planning member using ODI

    Hi All,
    Anyone know how to delete Hyperion Planning member using ODI? And how to update account type on Hyperion Planning Using ODI?
    e.g.:
    I have a member with account type Saved Assumption, and I need to change to Revenue, but it cannot change. But if I change to Expense, it can. So what's wrong with the mapping?
    This is my csv file for update a member on Hyperion Planning.
    Parent,Account,Default Alias,Operation,Data Storage,Two Pass Calculation,Account Type,Time Balance,Skip Value,Data Type,Exchange Rate Type,Use 445,Variance Reporting,Source Plan Type,Aggregation,Member Formula
    Account,Statistics,,Update,,,,,,,,,,,,
    Account,Meal,,Update,Store,,Expense,,,,,,,,,
    Account,Test1,,Update,Never Share,,Saved Assumption,Average,None,Non-currency,none,,,Consol,~,
    Account,Test2,,Update,Never Share,,Revenue,Average,None,Non-currency,none,,,Consol,~,
    Account,Test3,,Update,Never Share,,Saved Assumption,Average,None,Non-currency,none,,,Consol,~,
    Thanks in advance.
    Regards,
    Sumardi
    Edited by: Sumardi Wijaya on Mar 31, 2009 10:57 PM

    Hi,
    To delete a member you use the Operation column, the following values can be used.
    Update – This is the default and is used if not populated, it Add, updates, moves the member being loaded.
    Delete Level 0 - Deletes the member being loaded if it has no children
    Delete Idescendants –Deletes the member being loaded and all of its descendants.
    Delete Descendants –Deletes the descendants of the member being loaded, but does not delete the member itself.
    Does the member you trying to change to Revenue have a variance reporting set to "Expense" as it will need to be set to "Non Expense"
    Also in your interface you can add logging options in the IKM, this maybe will give a clearer indication where your problem lies.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Can anyone tell me how to install Hyperion Planning 9

    Hai
    I am Actually new to hyperion and i am eager to learn Hyperion Planning system 9 and Financial Reporting 9.3
    Do anyone have download links? to practice the all the reporting stuff
    Regards,
    Raju

    All the installation files are under https://edelivery.oracle.com/ For System 9, you can find the files under Hyperion Performance Management and BI.
    All the documents are under: http://download.oracle.com/docs/cd/E10530_01/welcome.html
    I am just curious why system 9? Oracle has recently released 11.1.2.1. Wouldn't you want to learn the latest version?
    Cheers,
    Mehmet

  • How to migrate Hyperion Planning 9.2.0 along with FR to Domain server acct

    Hi All,
    I need to migrate an existing Hyperion Planning 9.2.0 standalone implementation along with related FR reports to a new domain administrator account on a new server.Can anybody help me out with this?
    Thanks
    Abhi

    Install and configure software on new server.
    Migrate the planning application (this has been covered many times on here) e.g. Migrate from Planning 4.1 to Planning 11.1.3
    Export reports from source import into Target.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Load Hyperion Planning to R12 Budget using ODI

    hi,
    We are using Hyperion Planning v11 and Oracle Finance R12
    We already setup the ODI repository (Topology, Context, etc) and was able to do reverse using RKM Essbase
    Can anyone give us the steps/procedure on how to Load the Hyperion Planning data to Oracle Budget
    thanks in advance

    Can you please share the knowledge of loading Essbase data in to EBS using ODI?
    I heard you have to run concurrent program to post data in to GL. I am new to concepts of GL. Can you please share the information of the scripts you are mentioning and the knowledge to achieve the data load. Appreciate your help.
    Thanks in Advance.
    Thanks,
    SaiN

  • Hyperion planning application reverse error in ODI

    When trying to reverse the Planning application we are getting the below error. Please suggest. I have checked the connection details and everything looks fine
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (innermost last):
    File "<string>", line 41, in ?
    com.hyperion.odi.common.ODIHAppException: Failed to import the models into ODI repository.
    at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
    I am not trying to import the model from any folder but reversing it in the Model. Please help me out

    Hi Jitendra,
    I cannot forward the screenshots but this is what i did.
    In the topology manager under Hyperion Planning i created a dataserver. In the data server i have given the
    <servername>:11333 in the sever details and <username> <password> to my Planning Application.
    Then gave the Application name and mentioned the Context and connected it with the Logical schema.
    Then in the desigener, i created a moldel folder and mentioned the technology as Hyperion Planning and in the reverse tab selected customised reverse. then connected my context and agent and selected RKM Hyperion Planning and clicked on reverse.
    And when i have seen in the operator i got the error saying failed to import model into ODIrepository.
    Also the following error is there
    Caused by: java.sql.SQLException: ORA-00001: unique constraint (ODIWORK.PK_REV_COL) violated
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
    at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)

  • How to extract pdf document metadata and first page as image

    Hi,
    I have an asp.net application that allows uploading pdf documents - ebooks.
    1) How can I extract book title, author and other metadata from uploaded pdf.
    2) How can I create a thumbnail image of first page of pdf book.
    3) What is the minimum adobe software that must be installed on server to support this 2 features?
    Any sample in c# would be very helpfull. 
    Thanx,
       Valter

    3) What is the minimum adobe software that must be installed on server to support this 2 features?
    You may look at the LiveCycle products.

  • How to extract a sub string in SQL

    Hi,
    I have two columns "Project Name" and "Flag". 
    Now i want to find out all the project names which contain a particular substring in it, like say - "SRM" and update the "Flag" column to value 1 for all those projects.
    Can someone please help me with this. I'm not understanding how to do this in SQL.
    Many thanks.

    You can use CHARINDEX to achieve this, such as:
    Sample code:
    UPDATE YourTableName
    SET Flag = 1
    WHERE CHARINDEX('SRM', ProjectName) > 0
    Here CHARINDEX will check for string SRM in your Column & updates the rows that returns non-zero value wherever it finds
    I agree that this is one of the solution but would like to make few points here
    Charindex will always do a table scan however LIKE operator may or may not use index which can be critical performance issue when dealing with large data set.
    CHARINDEX has a limit of 8000 bytes [if I am not wrong] 
    It will do implicit data conversion to Unicode if any of the expression is Unicode.
    You can enhance your answer by using PATINDEX also for future users :) 
    My opinion:
    > Charindex will always do a table scan however LIKE operator may or may not use index whichcan
    be critical performance issue when dealing with large data set.
    I feel in this case, Like operator will also do scan for the fact that the position for value SRM is not known, it is definitely
    not beginning with SRM so I could use SRM%, the access predicate is NOT correctly aligned
    Good Luck! Please Mark This As Answer if it solved your issue. Please Vote This As Helpful if it helps to solve your issue

  • How to extract Project Plan Cost

    Hi SDNs,
    I need extract the Project Plan Cost which we can display via t-code CN41N,which datasource can I use to do it?
    Thanks a lot.
    Best regards
    Simon Liu

    all the info you need :
    http://help.sap.com/bp_bw370/BBLibrary/HTML/D11_EN_DE.htm (and click on configuratin guide)
    M.

  • How to extract data from SAP and COBOL using ODI

    Hi Folks,
    Can you please let me know the procedures in ODI to extract data from SAP and COBOL?
    Thank you all for the help.

    Hi
    You can download Patch 8571830 from Oracle metalink.
    It has a new technology "SAP ABAP" and KMs to extract and load data -
    RKM SAP ERP and LKM SAP ERP to Oracle.
    Thanks

  • Use ODI to Extract Data from Hyperion Planning & Budgeting report to Excel

    Hello
    Can someone tell me please how to Extract Data from (Financial Reporting in) Hyperion Planning & Budgeting into Excel Using ODI?
    Would the steps be the same as Creating an ODI Project and Interface: Exporting a Flat File to a Flat File? If not, why?
    Best Regards.
    Edited by: Saturday on May 26, 2012 9:55 PM

    Where do you think the financial reports get their data from? Financial Reports pull data from data sources such as Essbase, HFM.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to lock data independently for several groups in Hyperion Planning?

    I 'm developing a forecast application using Hyperion Planning 9.3.1 where the users shall be able to enter their monthly forecast numbers. We have two groups of users. Each group may have up to two forecast updates per month. The groups are independent – say, Group A may have one update for August and they want the numbers to be there by August 10th, while the Group B may have two updates for the same month with the first update to be completed by July 20th and second – by August 5th. Nobody knows in advance how many updates they are going to have for the month and when they are going to have them. Nothing should prohibit the users from updating their forecast numbers for the future months – say, they may enter their September forecast in July.
    Managers of both groups want to make sure that users don't change forecast numbers after the month close. If they plan to have two updates per month – they want data from the 1st update to be locked (become read-only) before they have 2nd update, and data from 2nd update locked after the month close; if they plan to have only one update per month – they want it locked after the month close.
    Any suggestions how I may structure the dimensions of this application to make sure that if I lock first August update for Group B on, say, August 3rd, the other group still can have it open until August 10th?
    Thanks!

    Hi John
    Well i have working knowledge in ODI, i did whole complete cycle and i did customization project for Oracle EBS to Data warehouse though ODI.
    What, I am NOT able to figure out How to LINK Hyperion Planning Outline to Oracle EBS HR Tables. cause in Hyperion Outline i m able to view Dimensions Not particular Column to map with EBS HR Table (column).
    Eample:
    In EBS HR we have Employee Number in Per_all_people_f but in Hyperion Planning Dimension is ONLY Employee.
    Your response highly appreciated.
    Chreeez
    Sher

  • Confused How to push Data from Oracle DB Tables into Hyperion Planning?

    HI
    I m Newbie to ODI. My DataSource is Oracle 11g Database (HR Tables) and my Target is Hyperion Planning.
    I successful imported Oracle DB HR tables into ODI and Hyperion Planning Dimensions Like(Employee) but i dont understand in " ODI Interface" how i am going to do Mapping between Oracle tables and Planning application Dimension, am i doing wrong way?
    I am confused if i have to push Data from Oracle 10g HR Tables into Hyperion Planning am i following right approach ?
    Looking for your guideline...
    Regards
    Sher

    Hi John
    Well i have working knowledge in ODI, i did whole complete cycle and i did customization project for Oracle EBS to Data warehouse though ODI.
    What, I am NOT able to figure out How to LINK Hyperion Planning Outline to Oracle EBS HR Tables. cause in Hyperion Outline i m able to view Dimensions Not particular Column to map with EBS HR Table (column).
    Eample:
    In EBS HR we have Employee Number in Per_all_people_f but in Hyperion Planning Dimension is ONLY Employee.
    Your response highly appreciated.
    Chreeez
    Sher

  • ODI Planning metadata load takes very long time

    Hi,
    I am using ODI for Hyperion Planning metadata load.
    We are facing performance issues, as the process is taking a very long time.
    The process uses "LKM File to SQL" and "IKM SQL to Hyperion Planning"
    The number of rows to process in the file is around 70000. The file is generated from DRM. The ODI integration process takes around 2 hours to process and load the file to Planning. Even if we add 1 new row to the file and everything else remains same in the file, the process takes that long.
    So, the whole process takes around 3 hours to load to Planning for all dimensions.
    I tried increasing the fetch rows to 200 in source but there is no significant increase in performance. The Heap size is set to maximum of 285 MB in odiparams.bat.
    How can the performance be improved?
    Can I use different LKM or change any other setting?
    Thanks,
    RS

    Hi John,
    In my current implementation, the dimension hierarchies are maintained in DRM.
    So, business directly makes changes in DRM and exports the hierarchies in a text file.
    I agree that loading 70000 records is odd on regular basis, but it makes it easier for business to retain control of their hierarchies and maintainance is easy in DRM.
    On bulk loading to DB table and loading to Planning, I have 2 questions:
    1. Do you think that "LKM SQL to SQL" [Oracle to Planning] will have significant improvement in performance over "LKM File to SQL" [File to Planning], as we are still using "Sunopsis Memory engine" as staging area?
    2. I checked your blog, there you have suggested using "Sunopsis memory engine" for "LKM SQL to SQL".
    Is it mandatory to use "Sunopsis emory engine" as staging area, can we use any other user defined staging area [Oracle tables]?
    Cheers,
    RS

  • Extraction of Essbase Metadata into a Text File

    When extracting metadata from Essbase into a txt file, the file lists the child members before the parents. We want it vice versa-just like it looks in Essbase. LKM Hyperion Essbase METADATA to SQL Is used for extraction.

    Unfortunately that is the way the API extracts the hierarchy.
    There are a couple of options extract the hierarchy with an incremental id, then order by the ID, this will need to be done in an rdbms staging area such as Oracle or SQL Server.
    If you are using Oracle you can always load to table and then using the connect by prior command to sort in the correct parent/child format, I am sure there is something equivalent in sql server.
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for

  • "Unauthorized" error for SOAP receiver channel

    Hi all, I have a scenario in which I am calling a .NET web service from a UDF in which the XML payload is constructed manually. I have configured a SOAP receiver channel. Also, since the web service needs certificate authentication, I have checked th

  • Blank second page and export error in Crystal 10 Web Report Viewer

    We have a customer that is having 2 issues viewing an .rpt file in the Crystal 10 Web Report Viewer.  When they view a report that is 12 pages, the first page appears OK.  When they click Next to go to the Next page, the page shows as blank.  The sec

  • \n or \r,\n in BatchRecord

    Hi all, I'm facing with BatchRecord to read file line by line. Because some files have end of line is \n or some files have end of line is \r,\n. So how BatchRecord can process both 2 above delimiter . Regards, Dai

  • Do I have to????

    When "sync-ing" ( if thats the proper term ) Do I have to sync all my files when it says sync or do I have a choice of what to sync? Or can I prevent my music from doing the sync thing & just sync my other stuff P.S. : My Library on iTunes does not m

  • I want to buy a book. But buying the book is impossible. What do I wrong?

    I want to buy a book. However after signing in I am asked to create a new acount. After doing this and signing in again I am asked again create a new account.This cyclus is going on endless. Finally....I cannot buy the book. What am I doing wrong?