How to fail a session based on number of target rows?

Thank you so much . it works .

Let the mapping do its job of filling the error table as usual. Just make sure that this session doesn't have any other target than this error table (otherwise things become a bit more complicated, but really only a bit).After this session set up one output path to the remainder of the workflow (meaning all those tasks which shall be executed when no error occurred). The workflow link to these tasks has to be edited in order to have a condition like this: $s_m_find_errors.TgtSuccessRows = 0(please don't nail me down on the exact syntax) From the same session set up a workflow link to a Control task set to "Fail workflow".The workflow link to this Control task has a condition like this: $s_m_find_errors.TgtSuccessRows > 0(again, please don't nail me down on the exact syntax) If the session needs to fill more than one target table, you can proceed almost the same way as depicted above. The only difference is that the workflow link conditions must be changed such that they check whether this particular error table has received 0 or >0 records. I don't recall the syntax, you can find it either in the Workflow Basics Guide or in the Advanced Workflow Guide. Regards,Nico

Similar Messages

How to invalidate a session based on the session id

How to invalidate a session based on the session id

You have to write your own support for this.
It used to be in the API, but was deprecated as a security hole.
The best way to do it is implement a session listener (javax.servlet.http.HttpSessionListener) which notifies you when sessions are created/destroyed.
You can then keep a map of sessions in your own code, indexed by session Id, and access any/all of them to invalidate as you choose.

How to get planned % complete based on number of days

Hello:
I a trying to figure out a way(best way) to determine a "planned % complete" simply based on the number of days in a task.
For example:
Task Start Date = 3/1/15
Task Finish Date = 3/20/15
So the task is 20 days long
Today is 3/10/15 so "planned % complete" should be 50%
(Today-Start) / (Finish-Start)
=
((3/10/15)-(3/1/15)) / ((3/20/15)-(3/1/15))
=
(10) / (20)
=
50%
Do I just enter this into a custom field as a formula or is there a better way of doing this?
Also, when I tried to do this with a formula, it did not apply to the roll up tasks. So, the bolded tasks were blank.
I am trying to get to a calculated number of the % I should be completed based on the current date and length of the task. I realize this might not be the best way so any
suggestions are greatly appreciated.
I would like to be able to look at my project and see that I am 35% complete, but I should be 50%.
Any guidance is greatly appreciated.
I am using MS Project 2010.
Thanks
kp

Hi kp,
You are typically asking for Earned Value indicators. You could of course use the kind of formula you are refering to, but have in mind that MS Project proposes by default a large number of EV fields, such as CPI, SPI and all variance fields. Although it
requires a certain maturity in scheduling (cost, baselines, status date, tracking), it will provide you a large set of EV indicators out of the box.
See an excellent article
here.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to fail a message based on payload?

Hi Experts,
Currently Iu2019m working on IDOC2JDBC scenario wherein the customer master details needs to be send from CRM system to Oracle system. My question is there are two fields at source side Postal code and Tax and my requirement is, if any of these two fields are initial (doesn't contain any value) then the message should fail in XI? I mean the message shouldn't go to Target system. Can I achieve this functionality in XI or at R/3 side? If yes please let me know the method or procedure by which the above functionality can be achieved? Do I need to fail the message at mapping level?
Your help is highly appreciated
Rgds
Faisal

Faisal,
if any of these two fields are initial (doesn't contain any value) then the message should fail in XI? I mean the message shouldn't go to Target system.
These are two different things - do you want the message to fail in PI or you don't want to create the target message if the condition fails?
If you want the message to fail in PI - write an UDF and can raise an exception / create email notifications.
If you don't want to create the target structure, you can use "if-else" condition / UDF / createif function.
Regards,
Neetesh

How to split the IDOCS based on document number change whit out BPM

Hi all,
Thanks,for giving the responce..
Scenario:File to IDoc.
Problum1 : How to Split the IDocs based on document number change in the source file with out BPM.My file contains document numbers like
20000092
20000092
20000092
50000050
50000050
50000065
I want 3 IDocs in target system.i.e 1 for 20000092,20000092,20000092
2 for 50000050,50000050
3 for 5000006
By using external definations i am getting 6 IDOCs insted of 3.
Problum 2:Is there any chnges/modifications in Directory when we are using external definations.
Could u plz provide me the step by step process(Repository/Directory) with using of external definations.
Thanks in advance.
Regards,
KP

HI,
for this no need of BPM.
You can think of Idoc bundling concept to acheive this-just you need to do the external definition to change the idoc occurence
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
to achieve for each document no, one idoc, you can write small user defined function in the mapping with context handling you an achieve this.
For this e.g
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
Regards,
Moorthy

Based on number of boxes how GR slip can be splitted ?

Hello,
when I receive 10 qtys of say item XYZ in two boxes so based on number of boxes two seperate GR slips should be printed for the same material which should have same GR Number & qty split ( as per box ), How to map such scenerio ?
Regards,
Abhijit.

Hi,
Is Handling Unit Management is configured for your Business scenario ?
I feel without HUM it is quite impossible to generate Material slips based upon the Number of boxes.
Regards,

How to remove the Sessions used in the application

Hai Techies,,,
i am using many number of sessions in my application, for example i am using 5 sessions in reports module
my application is a web based application
if can't remove the sessions it contains the huge amount of data , my application is going into mess, and the application performance will be decreased..
Can anybody tell the solution for this Problem
How to remove the Sessions used in the application
Hoping a reply
Thanks & Regards
Krishna mangamuri

Hai Gita,
i am not able to do the session invalidate method bcoz, i am mainatainting the session from login along with the current userid who is login into the system and putting some of the data in session....
thats session is to be valid upto when i click on logoff link
except that i have to remove the sessions in my application
while navigating from one jsp to another i have to remove the sessions, bit somes times that sessions may be used somewhere
Can u Understand My problem
session remove method may also helpful to me but some times it will casue some prob to me
Is there any other Way to remove the sessions in the Application ????
Thanks & Regards
Krishna Mangamuri

How to create a report based on a DataSet programatically

I'm working on a CR 2008 Add-in.
Usage of this add-in is: Let the user choose from a list of predefined datasets, and create a totally empty report with this dataset attached to is. So the user can create a report based on this dataset.
I have a dataset in memory, and want to create a new report in cr2008.
The new report is a blank report (with no connection information).
If I set the ReportDocument.SetDataSource(Dataset dataSet) property, I get the error:
The report has no tables.
So I must programmatically define the table definition in my blank report.
I found the following article: https://boc.sdn.sap.com/node/869, and came up with something like this:
internal class NewReportWorker : Worker
      public NewReportWorker(string reportFileName)
         : base(reportFileName)
public override void Process()
         DatabaseController databaseController = ClientDoc.DatabaseController;
         Table table = new Table();
         string tabelName = "Table140";
         table.Name = tabelName;
         table.Alias = tabelName;
         table.QualifiedName = tabelName;
         table.Description = tabelName;
         var fields = new Fields();
         var dbField = new DBField();
         var fieldName = "ID";
         dbField.Description = fieldName;
         dbField.HeadingText = fieldName;
         dbField.Name = fieldName;
         dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
         fields.Add(dbField);
         dbField = new DBField();
         fieldName = "IDLEGITIMATIEBEWIJS";
         dbField.Description = fieldName;
         dbField.HeadingText = fieldName;
         dbField.Name = fieldName;
         dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
         fields.Add(dbField);
         // More code for more tables to add.
         table.DataFields = fields;
         //CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo info =
         //   new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
         //info.Attributes.Add("Databse DLL", "xxx.dll");
         //table.ConnectionInfo = info;
         // Here an error occurs.
         databaseController.AddTable(table, null);
         ReportDoc.SetDataSource( [MyFilledDataSet] );
         //object path = @"d:\logfiles\";
         //ClientDoc.SaveAs("test.rpt", ref path, 0);
The object ClientDoc referes to a ISCDReportClientDocument in a base class:
   internal abstract class Worker
      private ReportDocument _ReportDoc;
      private ISCDReportClientDocument _ClientDoc;
      private string _ReportFileName;
      public Worker(string reportFileName)
         _ReportFileName = reportFileName;
         _ReportDoc = new ReportDocument();
         // Load the report from file path passed by the designer.
         _ReportDoc.Load(reportFileName);
         // Create a RAS Document through In-Proc RAS through the RPTDoc.
         _ClientDoc = _ReportDoc.ReportClientDocument;
      public string ReportFileName
         get
            return _ReportFileName;
      public ReportDocument ReportDoc
         get
            return _ReportDoc;
      public ISCDReportClientDocument ClientDoc
         get
            return _ClientDoc;
But I get an "Unspecified error" on the line databaseController.AddTable(table, null);
What am i doing wrong? Or is there another way to create a new report based on a DataSet in C# code?

Hi,
Have a look at the snippet code below written for version 9 that you might accommodate to CR 2008, it demonstrates how to create a report based on a DataSet programmatically.
//=========================================================================
+           * the following two string values can be modified to reflect your system+
+          ************************************************************************************************/+
+          string mdb_path = "C:
program files
crystal decisions
crystal reports 9
samples
en
databases
xtreme.mdb";    // path to xtreme.mdb file+
+          string xsd_path = "C:
Crystal
rasnet
ras9_csharp_win_datasetreport
customer.xsd"; // path to customer schema file+
+          // Dataset+
+          OleDbConnection m_connection;                         // ado.net connection+
+          OleDbDataAdapter m_adapter;                              // ado.net adapter+
+          System.Data.DataSet m_dataset;                         // ado.net dataset+
+          // CR variables+
+          ReportClientDocument m_crReportDocument;          // report client document+
+          Field m_crFieldCustomer;+
+          Field m_crFieldCountry;+
+          void CreateData()+
+          {+
+               // Create OLEDB connection+
+               m_connection = new OleDbConnection();+
+               m_connection.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + mdb_path;+
+               // Create Data Adapter+
+               m_adapter = new OleDbDataAdapter("select * from Customer where Country='Canada'", m_connection);+
+               // create dataset and fill+
+               m_dataset = new System.Data.DataSet();+
+               m_adapter.Fill(m_dataset, "Customer");+
+               // create a schema file+
+               m_dataset.WriteXmlSchema(xsd_path);+
+          }+
+          // Adds a DataSource using dataset. Since this does not require intermediate schema file, this method+
+          // will work in a distributed environment where you have IIS box on server A and RAS Server on server B.+
+          void AddDataSourceUsingDataSet(+
+               ReportClientDocument rcDoc,          // report client document+
+               System.Data.DataSet data)          // dataset+
+          {+
+               // add a datasource+
+               DataSetConverter.AddDataSource(rcDoc, data);+
+          }+
+          // Adds a DataSource using a physical schema file. This method require you to have schema file in RAS Server+
+          // box (NOT ON SDK BOX). In distributed environment where you have IIS on server A and RAS on server B,+
+          // and you execute CreateData above, schema file is created in IIS box, and this method will fail, because+
+          // RAS server cannot see that schema file on its local machine. In such environment, you must use method+
+          // above.+
+          void AddDataSourceUsingSchemaFile(+
+               ReportClientDocument rcDoc,          // report client document+
+               string schema_file_name,          // xml schema file location+
+               string table_name,                    // table to be added+
+               System.Data.DataSet data)          // dataset+
+          {+
+               PropertyBag crLogonInfo;               // logon info+
+               PropertyBag crAttributes;               // logon attributes+
+               ConnectionInfo crConnectionInfo;     // connection info+
+               CrystalDecisions.ReportAppServer.DataDefModel.Table crTable;+
+               // database table+
+               // create logon property+
+               crLogonInfo = new PropertyBag();+
+               crLogonInfo["XML File Path"] = schema_file_name;+
+               // create logon attributes+
+               crAttributes = new PropertyBag();+
+               crAttributes["Database DLL"] = "crdb_adoplus.dll";+
+               crAttributes["QE_DatabaseType"] = "ADO.NET (XML)";+
+               crAttributes["QE_ServerDescription"] = "NewDataSet";+
+               crAttributes["QE_SQLDB"] = true;+
+               crAttributes["QE_LogonProperties"] = crLogonInfo;+
+               // create connection info+
+               crConnectionInfo = new ConnectionInfo();+
+               crConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;+
+               crConnectionInfo.Attributes = crAttributes;+
+               // create a table+
+               crTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();+
+               crTable.ConnectionInfo = crConnectionInfo;+
+               crTable.Name = table_name;+
+               crTable.Alias = table_name;+
+               // add a table+
+               rcDoc.DatabaseController.AddTable(crTable, null);+
+               // pass dataset+
+               rcDoc.DatabaseController.SetDataSource(DataSetConverter.Convert(data), table_name, table_name);+
+          }+
+          void CreateReport()+
+          {+
+               int iField;+
+               // create ado.net dataset+
+               CreateData();+
+               // create report client document+
+               m_crReportDocument = new ReportClientDocument();+
+               m_crReportDocument.ReportAppServer = "127.0.0.1";+
+               // new report document+
+               m_crReportDocument.New();+
+               // add a datasource using a schema file+
+               // note that if you have distributed environment, you should use AddDataSourceUsingDataSet method instead.+
+               // for more information, refer to comments on these methods.+
+               AddDataSourceUsingSchemaFile(m_crReportDocument, xsd_path, "Customer", m_dataset);+
+                              +
+               // get Customer Name and Country fields+
+               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Customer Name", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+               m_crFieldCustomer = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Country", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+               m_crFieldCountry = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+               // add Customer Name and Country fields+
+               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCustomer);+
+               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCountry);+
+               // view report+
+               crystalReportViewer1.ReportSource = m_crReportDocument;+
+          }+
+          public Form1()+
+          {+
+               //+
+               // Required for Windows Form Designer support+
+               //+
+               InitializeComponent();+
+               // Create Report+
+               CreateReport();+
+               //+
+               // TODO: Add any constructor code after InitializeComponent call+
+               //+
+          }+//=========================================================================

Access to a logged-in user's information via a session based object

I am in the process of putting together a design for the security layer of a given
application I am working on. The requirements for authentication demand that
the framework take advantage of digital certificates and username/password verification.
The digital certificate end is relatively straightforward in terms of configuration
within WebLogic 6.1. I am planning on implementing a RDBMS security realm for
the username/password verification piece and again, from the documentation I have
seen, it seems relatively straightforward in setting that up as well.
The question I do have is in regards to once the user has successfuly logged in
to the application. Is there anyway to manage and have access to a set of user
info or credentials once they successfuly log in - aka some sort of session based
object that WebLogic Server facilitates? Or is this something that will have
to be explicitly built from our end if requirements do arise that necessitate
user information to be readily available as such?
Any feedback would be helpful....thanks!!

Use the cfquery tag to query the database. If you don't know
how to write sql, I have heard good things about the book, Teach
Yourself SQL in 10 Minutes by Ben Forta.

How to create a record based on the name of a file in the file-system?

Hi,
With a lot of pictures I want to have a database to gather some information about these pictures.
First question is how to generate a record based on a file in the file system?
e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
any suggestions?
any reaction will be appreciated.
Leo

Link to Create directory
http://www.adp-gmbh.ch/ora/sql/create_directory.html
You can create a list of files in the directory and read the list files from that directory.
[UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
[Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
SS

How to find active sessions count on a server in weblogic server console

Hi All,
I would like to know how to find active sessions count on a server in weblogic console. I am using weblogic 11g.
Regards,
Sunil.

On the deployment, monitoring tab, you can select web applications. Here the number of current sessions are listed per web application deployed on the domain.
The deployment itself (deployments, application, monitoring, sessions) shows a list of sessions and where it is located. Unfortunately, there is no aggregation (but that is something you can so yourself as well).
When you are using a load balancer in front, the count of sessions on per web application on the domain gives you some clue how many sessions there are present on each server.
That is to say, when load balancer is using round-robin (and does that correct), you can take the total number of sessions divide it by the number of servers.

How to setup the security based on roles in Organization.

Hi,
How to setup the security based on roles in Organization.
For example:Few users are Manager and a few user are Non Manager .Manager should have access to all work data including Non Manager and Non Manager should access based role.How to setup this? How OBI server identify the user role?
kindly let me know.
Regards.,
CHR

Hi,
You need to have Back End support to achieve this. In Back End you need to create two groups . You need to know what joins has to be made for which group (which is more important) and also make session variable for the userrole (with SQL supporting it). In the BMM layer, we need to put the security join conditions in the 'where clause'.
And make a common report. User loggin in with the respective userid will have userrole and joins assigned in the Back end. And they will be viewing the report according to their access.
Hope this will solve your problem.
Regards
MuRam

How to add column dynamically based on user input in oracle?

**how to add column dynamically based on user input in oracle?**
I am generating monthly report based on from_date to to_date below is my requirement sample table
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE | 01-OCT-12 | 02-OCT-12 | 03-OCT-12
100001.............John...........02-OCT-12...............6
100002.............chris...........01-OCT-12...............4
Based on user input, that is, if user need the report from 01-OCT-12 TO 03-OCT-12, i need to add that dates as column in my table, like 01-OCT-12 | 02-OCT-12 | 03-OCT-12....
below is my code
create or replace
procedure MONTHLY_LVE_NEW_REPORT_demo
L_BUSINESS_UNIT IN SSHRMS_LEAVE_REQUEST_TRN.BUSINESS_UNIT%TYPE,
--L_LEAVE_TYPE_CODE IN SSHRMS_LEAVE_REQUEST_TRN.LEAVE_TYPE_CODE%TYPE,
L_DEPARTMENT_CODE IN VARCHAR2,
--L_MONTH IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_FROM_DATE IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_TO_DATE in SSHRMS_LEAVE_REQUEST_TRN.LVE_TO_DATE%type,
MONTHRPT_CURSOR OUT SYS_REFCURSOR
AS
O_MONTHRPT_CURSOR_RPT clob;
v_return_msg clob;
BEGIN
IF (L_BUSINESS_UNIT IS NOT NULL
AND L_FROM_DATE IS NOT NULL
and L_TO_DATE is not null
-- AND L_DEPARTMENT_CODE IS NOT NULL
THEN
OPEN MONTHRPT_CURSOR FOR
select EMPLOYEE_CODE, EMPLOYEE_NAME AS NAME, DEPARTMENT_CODE AS DEPARTMENT,DEPARTMENT_DESC, CREATED_DATE,
NVL(WM_CONCAT(CL_RANGE),'') as CL_TAKEN_DATE,
case when NVL(SUM(CL2),0)<0 then 0 else (NVL(SUM(CL2),0)) end as CL_BALANCE,
from
SELECT DISTINCT a.employee_code,
a.EMPLOYEE_FIRST_NAME || ' ' || a.EMPLOYEE_LAST_NAME as EMPLOYEE_NAME,
a.DEPARTMENT_CODE,
a.DEPARTMENT_DESC,
B.LEAVE_TYPE_CODE,
B.LVE_UNITS_APPLIED,
B.CREATED_DATE as CREATED_DATE,
DECODE(b.leave_type_code,'CL',SSHRMS_LVE_BUSINESSDAY(L_BUSINESS_UNIT,to_char(b.lve_from_date,'mm/dd/yyyy'), to_char(b.lve_to_date,'mm/dd/yyyy'))) CL_RANGE,
DECODE(B.LEAVE_TYPE_CODE,'CL',B.LVE_UNITS_APPLIED)CL1,
b.status
from SSHRMS_EMPLOYEE_DATA a
join
SSHRMS_LEAVE_BALANCE C
on a.EMPLOYEE_CODE = C.EMPLOYEE_CODE
and C.STATUS = 'Y'
left join
SSHRMS_LEAVE_REQUEST_TRN B
on
B.EMPLOYEE_CODE=C.EMPLOYEE_CODE
and c.EMPLOYEE_CODE = b.EMPLOYEE_CODE
and B.LEAVE_TYPE_CODE = C.LEAVE_TYPE_CODE
and B.STATUS in ('A','P','C')
and (B.LVE_FROM_DATE >= TO_DATE(L_FROM_DATE, 'DD/MON/RRRR')
and B.LVE_TO_DATE <= TO_DATE(L_TO_DATE, 'DD/MON/RRRR'))
join
SSHRMS_LEAVE_REQUEST_TRN D
on a.EMPLOYEE_CODE = D.EMPLOYEE_CODE
and D.LEAVE_TYPE_CODE in ('CL')
AND D.LEAVE_TYPE_CODE IS NOT NULL
group by EMPLOYEE_CODE, EMPLOYEE_NAME, DEPARTMENT_CODE, DEPARTMENT_DESC, CREATED_DATE
else
v_return_msg:='Field should not be empty';
end if;
END;
my code actual output
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE
100001....................John............02-OCT-12.................6
100001....................chris...........01-OCT-12.................4
how to add column dynamically based on from_date to to_date?
Thanks and Regards,
Chris Jerome.

You cannot add columns dynamically. But you can define a maximum number of numbers and then hide unused columns in your form useing SET_ITEM_PROPERTY(..,VISIBLE, PROPERTY_FALSE);

How to get the session variable value in JSF

Hi
This is Subbus, I'm new for JSF framewrok, i was set the session scope for my LoginBean in faces-config.xml file..
<managed-bean-name>login</managed-bean-name>
<managed-bean-class>LoginBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope> like that...
So all parameter in LoginBean are set in session right ?... for example i used userId is the Parameter...
Now i need to get the the userId parameter from that session in my another JSP page.. how i get that ?..
Already i tried
session.getAtrribute("userId");
session.getValue("userId");
but it retrieve only "null" value.. could u please help me.. it's very urgent one..
By
Subbus

Where i use that..is it in jsp or backend bean...
simply i use the following code in one backend bean and try to get the value from there bean in the front of jsp page...
in LogoutBean inside
public String getUserID()
     Object sessionAttribute = null;
     FacesContext facescontext=FacesContext.getCurrentInstance();
     ExternalContext externalcontext=facescontext.getExternalContext();
     Map sessionMap=externalcontext.getSessionMap();
     if(sessionMap != null)
     sessionAttribute = sessionMap.get("userId");
     System.out.println("Session value is...."+(String)sessionAttribute);
     return (String)sessionAttribute;
     return "fail";
JSP Page
<jsp:useBean id="logs" scope="session" class="logs.LogoutBean" />
System.out.println("SS value is ...."+logs.getUserID());
but again it retrieve only null value.. could u please tell me first how to set the session variable in JSF.. i did faces-config only.. is it correct or not..
By
Subbus

How to validate a session object in jsp?

Hi All,
i am facing a problem.The problem is how to validate the session object object in jsp.I have written a java script by using a defined function as setInterval and has given 5 mintues if the user is idle and will show a pop up menu before time out the session but in case of page active still this pop up menu is coming. The java script as follows.
function SetTimer(){
     //How long before timeout (should be a few minutes before your server's timeout
     //set timer to call function to confirm update
     if(timeoutMinutes)
     timerObj = setInterval("ConfirmUpdate()",60000);
function clearTimerFn(){
          timerCount = 0;
          clearInterval(timerObj);
          //timerObj = setInterval("ConfirmUpdate()",60000);
function ConfirmUpdate(){
     //Ask them to extend
     if(confirm("Your session is about to expire. Press 'OK' to renew your session.")){
          //load server side page if ok
          var url = "ajaxSessionchecker.do?sessionvalidate=sessionvalid";
          LoadXMLDoc(url);
And in jsp i am calling this js function as
<%session=request.getSession(false);
          if(session.getLastAccessedTime()==60000){ %>
          <script type="text/JavaScript">
     clearTimerFn();
</script>
<%}else{
session.setMaxInactiveInterval(-1000);} %>
could you pls help me out?

The reason for doing this is when ever i come to this user.jsp from account.jsp with a different account number this user.jsp is not refreshed and i still
see the same old user.jsp for the previous account that i naviated before. Also please let me know if there is any other approach to acheive this taskDoes refreshing the page by pushing F5 solve the problem?
If so, then the browser is caching the page, despite your attempts to stop it.

How to fail a session based on number of target rows?

Similar Messages

Maybe you are looking for