How to fetch Positon and Job text for the employee

Hi all,
How can I fetch the Postion and Job text from the infotype HRP1001 contains in last fields.
When I'm picking it takes from the last latest record, but in PA30 picks the next to the latest records some times.
Please help me in this.
Thank you!
Prasad

Hi,
You can use standard function:
With object id got from infotype 1001 (sobid) u can fetch descriptiosn from infotype 1000.
data: ti_i1000 LIKE p1000 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RH_READ_INFTY_1000'
      EXPORTING
        plvar            = '01'                   " Version plan usually 01
        otype           = 'C'                     " C = Funcion, S = Position
        objid            = p_objid              " Object ID function or position
        begda          = p_begda
        endda            = p_endda
      TABLES
        i1000            = ti_i1000        " Inoftype 1000 structure
      EXCEPTIONS
        nothing_found    = 1
        wrong_condition = 2
        wrong_parameters = 3
        OTHERS           = 4.
Then you can use field ti_i1000-stext.
Hope this helps.
Daniel
Edited by: Daniel Siñani Cardenas on Jun 30, 2009 11:05 PM

Similar Messages

How user can get a Sales Text for the any Line Item in the Billing?

Salute Masters ! !
How user can get a Sales Text for the any Line Item in the Billing?
It's coming for other Order (Line Item for Bought out Item at Project Site - Some Item they procure at project site & complete the task).
Where I can configure in system for all.
Rgds
Srivastav
09973504950

Hi,
Sales text can be copied from customer to order , order to delivery and delivery to billing .
Check the T-code : VOTXN , do the customization as per your requirement.
check the below link :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/dd/55f993545a11d1a7020000e829fd11/content.htm

HOW TO CREATE INVOICES AND BOOK RECEIPTS FOR THE SERVICE CUSTOMERS

whenever a customer approaches our Customer Service Officer he create a
customer account from "Contact Centre" but he does not check "Create account"
checkbox so the client is not created as customer in Oracle Receivables.
How to create invoices and receipts for service customers whose reciprocal
accounts are not created in Oracle Receivables?
Regards
Ahmad Bilal
Message was edited by:
user531507

I am on EP7.0 with NWDS 7.0 SP8, i am getting the exact same error though my Webservices are hosted on PI 7.1 ESR. Where to define the logical destinations of the WSDLs.

How to get the sql id and sql text for the pid which is completed.

Hi All,
I like to know how the get the details of sql_id and sql_text using the proecess which is completed already (ie., no more showing in the top command).
But I have the details of the process id.
Database name: 11g
os: sun os
thanks
Edited by: user9354175 on Nov 8, 2010 10:42 AM

If the session is still connected you might try this:
- query v$process where spid = os-process-number
- then join v$process to v$session using ADDR (in process) to PADDR (in session)
- then look at PREV_SQL_ID in v$session.
- use that to get the SQL_TEXT in for instance V$SQLAREA.
Could work, if all info is still in the SGA...

HT4623 how to use itunes and download IOS for the phone

Hi
Recentle i am having problem using whats app application, it says my IOS system does not support....how do i use the I-tunes to down load this into my phone. Thanks

Basically Yes...
See this long Discussion...
https://discussions.apple.com/message/20723017#20723017

Stop Sending and Receiving Emails for the employee which is no longer exist

Exchange 2007
Hi There,
I have lot's of mailboxes in my exchange server which their users are not with us anymore.
I would like to stop receiving any emails for them.
I know if I go to "Mail Flow Settings\Message Delivery Restrictions\Accept messages from\Only Senders in the Following List" and select a dummy user it works but it sends my server information to the sender. and I do not want to give the
information.
Any idea how to:
Stop sending / Receiving email for these type of users?
OR
Changing the respond message?
Thank you in Advance for your time

You have a couple options. Removing the mailbox would be the simple solution to stop mail flow, but I am assuming you need the mailbox which is why you have not taken this route.
Alternatively, if you have a message filtering solution in place that sits in front of your Exchange environment, you may be able create a filter to block inbound messages for a specific address so the message never reaches your internal Exchange servers.
This would prevent any information regarding you Exchange servers being returned.
If you do not have a filtering solution to do this, you can create a delivery status notification (DSN) so that a custom response is returned when messages are sent to a mailbox. Refer to this article on creating a DSN:
http://technet.microsoft.com/en-us/library/aa996803(EXCHG.80).aspx

How to fetch year till date value for earning for current ,last and year

hi,
how to fetch year till date value for earning for current ,last and year before that from payroll result
plz reply soon,
pratyush

Dear Pratyush,
Pick this from CRT.
Use LDB PNPCE & Fire event GET PAYROLL &
then you can pick from CRT.
Hope this helps.
Kindly reward in case useful.
Regards & Thanks,
Darshan Mulmule

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
1. Open Photoshop.
2. Select Preferences from the Edit Menu, then select General.
3. Change the HUD Color Picker to Hue Strip (Medium).
4. Select Interface from the Preferences menu on the left side of the dialog box.
5. Change the UI Font Size to Large in the Text area of the Preferences dialog box.
6. Select Experimental Features from the Preferences menu on the left side of the dialog box.
7. Select Scale UI 200% for high-density displays (Windows only).
8. Click on OK, then Exit/Quit Photoshop.
9. Open Photoshop and everything should be readable.

How do I copy and paste text from a converted Word document?

I just converted a pdf file into word. I want to copy and paste the informatiuon into another document. How do I do that?

Hi Sara. Tanks for responding. If I cannot figure this out (I was up
until 2am last night), I want to cancel my subscription.
Here are two files you can check on/help me with. When I try again, it
comes up 'an error has occurred when trying to access the service.'
Please advise.
Pat Tomassi
In a message dated 11/1/2014 12:55:23 A.M. Eastern Daylight Time,
[email protected] writes:
How do I copy and paste text from a converted Word document?
created by Sara.Forsberg (https://forums.adobe.com/people/Sara.Forsberg)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/6888908#6888908)

How do I cut and paste text from a Word doc to my yahoo email?

I am suddenly unable to cut and paste from a Word document into the body of my yahoo email. I never had this problem before, but recently trying to paste my resume into the site 4entertainmentjobs.com, I ran into trouble. I followed your instructions and found my profile folder, but there was no user.js file in there. I created one in text edit and replaced mozilla.org with 4entertainmentjobs.com, but it still didn't work. Today I tried to go back and put Mozilla back in, but I still cannot get it to work. Then I downloaded your add-on "allow clipboard". That did not work either.

Hi Sara. Tanks for responding. If I cannot figure this out (I was up
until 2am last night), I want to cancel my subscription.
Here are two files you can check on/help me with. When I try again, it
comes up 'an error has occurred when trying to access the service.'
Please advise.
Pat Tomassi
In a message dated 11/1/2014 12:55:23 A.M. Eastern Daylight Time,
[email protected] writes:
How do I copy and paste text from a converted Word document?
created by Sara.Forsberg (https://forums.adobe.com/people/Sara.Forsberg)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/6888908#6888908)

How to create clean text for the web in Photoshop/Illustrator

I am puzzled to death on how in the world to get clean text for the web in Photoshop/Illustrator, particularly white text. I want my text to turn out exactly like the text at this website: thepainteddoor.org
If you scroll down to the bottom of that page, notice the titles "Featured Media", "Social Networking", and "Contact Information". They are all .gif images. I have tried to replicate what these images look like for about 3 hours now to no avail. Can anyone tell me how to do this? It just looks like a simple outline or drop shadow, but I can't get it to show up like that. If someone could help me replicate that effect with text (aka make it show up clean as an image), I would graciously give them money through PayPal*.
* = I will only give cash if it will replicate it exactly (and I mean exactly)..and it won't be too much..I'm a poor college student. :-P
Thanks in advance!
Thomas

You would do it the way I created it:
Select the Text tool in Photoshop and set the font and parameters as I have listed. Then enter whatever text you like. It will be rendered over the top of the lower layers you may have in the document. Save as an image of the appropriate type and you're there.
Note that "lower layers you may have in the document" could conceivably be none at all (i.e., you render the text over a transparent document). You could imagine saving that as a .png with transparency and get light text in an image that could then be put over the top of anything else. The alpha mixing will see to it that the edges smoothly blend with the background. I haven't actually tried this (I usually do try my own suggestions) because of lack of time right now.
-Noel
Edit: Markerline and I seem to be on the same crystal-controlled wavelength.

How do you change the color of the sign and fill text to the color blue

How do you change the color of the sign and fill text to the color blue in a pdf document

Is this using the "Fill & Sign" tab of https://cloud.acrobat.com/fillsign (for now text input is only black) or maybe using the Fill & Sign tool in Adobe Reader XI, or another application?
Thanks,
Josh

How to paste arabic and russian text in indesign and have the fonts recognized?

How to paste arabic and russian text in indesign and have the fonts recognized?

There is a preference item for clipbaord handling that toggles text ony or formatted text when pating from external applications. You may be pasting unformatted text.
And of course the fonts must be installed...

How to get the text for the new query

Hi all...
we have created a new query by copy of existing query. iwe have changed only the sales area in the filter.
when we run the original query in japan language, getting japan text for the material where as for the new query it is not getting japan text.
we have extracted text masterdata for sales area but when we run the query it is not displaying material description in japan language.
how to get text for the material in the new query?
thanks

hi,
What is the output for text filed you are getting as of now?
Check the properties of the material in old query?
Generate the query in tcode RSRT and execute and check.
Check if the Display as properties is selected as "Key and Text".
try to replace it back(sales area) in filters and check in new query - if u are getting the desired output or not.
Regards
KP

How can u insert and retrieve text files in any format using forms6i.

how can u insert and retrieve text files in any format using forms6i.
can u give me an example of an insert statement, let's assume the file is located in the a:drive.
and retrieving the files, i would give the user a list of all the files that are in the database, the user would select one, but what command(or piece of code) would open the file in its apppropriate editor.
e.g .pdf formatted file would open in acrobat.
any help would be appreciated.
Thanks
Hussein Saiger

the filereference class is for downloading and uploading files.
if you want to load xml, use the xml class.
and, if you want to write to an xml file and don't want to use server-side code, wait.

How to fetch Positon and Job text for the employee

Similar Messages

Maybe you are looking for