How to fetch this field for my report?

Hi.,
In my system I am having one zprogram, where..,
If we enter F1 and F2 in the first screen we can present with second screen where we can have details...
In that details we are having F3 field(Say).
So this is not standard program. and for first screen we are having T'Code as TT1(Say).
And the most important thing here we have to note is F3 is not fetching from any database or tables...
So Here they are developed one code to generate that. Later they are not saving it in any data base or custom table..!
So Now my reuirement is..,
Here I want to develop one report with some columns(Fields) where it contains above F3.
Now,
I am having F1 and F2 with me.,
So how can I get F3 Value?
Do i need to use same logic behind the above program?
Or,
Can I call that second screen by inputting first screen inputs i.e F1 and F2?
If soo, How can read F3 from second screen?
Thanks for your attention.
Let me know if you want any further information.
--Naveen Inuganti.

In your report ,u can use the same logic code to calculate F3 ,dat they have used in the program.
If you feel value of F3 is needed in lots of places in your project,then u can develop a FM to calculte F3 inpuuting F1 and F2..and use the FM where evr u want...

Similar Messages

How to select this field for the extractor?

Hi Gurus, I hope you are fine!
I need to extract the field     PRED_OPPT_GUID   form the Data source 0CRM_SRV_CONTRACT_H inside CRM system.
If I go inside CRM to:
Transaction SBIW -> Settings for BW Adapter -> Maintain DataSource and Enhance BW Adapter Metadata ->
tipe "0CRM_SRV_CONTRACT_H" and press change buttom -> Mapping TAB
there I can see the field I need "PRED_OPPT_GUID" but this is not selected at the "BW Selection" Column , I guess this is the cause why I am not receiving this field from the extractor, Am I right?
If yes, How can I select this field for the "BW Selection" Column? (the system does not allow me to click it directly)
if not, what is the proper procedure if I need to extract this field ? because this is the key field for the DSO
" Service Orders: Header Data "
Thanks

This is what i can see inside the ROOSFIELD table:
Filtered by data source = 0CRM_SRV_PROCESS_H
Comparison with another field:
BILL_TO_PARTY (working properly)    columns:        SELECTION = X              NOTEXREL= Y
PRED_OPPT_GUID (Not working)           columns:        SELECTION = (Empty)    NOTEXREL= Y
I think that if I try to change the Selection field to X it will cause inconsistencies with the SMOXRELP table am I right ?
I tried to change using the system and not directly into the tables, but thaere was an inconsitecie between these 2 tables.
Why is no able this field taking into account that this is the KEY FIELD inside the standard DSO? it has no sense to me.
What do you think?
regards.

New field for RFDEPL00 report

Hello, colleagues. Could you tell me how to add new field for RFDEPL00 report? It's gonna be field from KNA1 table. I know that note 984305 helps to do it for FBL5N. But this report uses another structure.

Hi,
I don't think you can... Indeed, with RFITEMAR report (FBL5N), you can play with the structure, but not in RFDEPL00/RFKEPL00 reports. Only modification: you can take note 868388 as an example of a change, if you decide to do it.
Regards,
Eli

How to create PLD_Items table for Crystal Reports

Hi experts,
Im trying to use the variable 130 for a report but in crystal reports, in some SAP Standard Reports the table PLD_Items appears, my question is how to create this structure for my report, i know that is an ADO.NET connection based on an XML file, but i dont know from where i can take this value can any one help me please?
Best Regards
Dave

If this is CR for B1, please post to SAP Business One Application
Alternatively see the SCN Site Index for the correct SCN Space for your product / component.
- Ludek
SCN Moderator

How to apply formula field for a chart object in crystal report XI

Hi
how to add formula field for a chartobject, i tried the following code but returns invalid condition field.
i want to show different chart in same crystal report viewer with different coursestatus values.
please suggest where ia m wrong.
               FormulaField oFormulaField;
               oFormulaField = new FormulaField();
               oFormulaField.Name = "Status1";
               oFormulaField.Text = "{CSP_PROCESS_REPORT.Coursestatus} = 'Mastered'";
               oFormulaField.Syntax = CrFormulaSyntaxEnum.crFormulaSyntaxCrystal;
               oFormulaField.Type = CrFieldValueTypeEnum.crFieldValueTypeStringField;
                boChartObject.ChartDefinition.ConditionFields.Add(oFormulaField);
regards,
Padmanaban V

i missed the following line in my code.
rcDoc.DataDefController.FormulaFieldController.Add(oFormulaField);
now it works......
my next issue is that,
chart returns True & False captions. but i want to show actual value. how its to be done
regards,
Padmanaban V

How to call this procedure in my report to print my procedure output

Hi,
i have a table named letter,it contains 2 columns named as letter_id and letter_content.
select * from letter;
letter_id letter_content
103 Dear MFR
103 This is in regards to the attached DM List
103 Please Credit us after reviewing it.
103 Thanks
103 Regards
103 xxxx
108 Dear customer
108 This is to inform that ur DM List is as follows
108 Credit us according to the Dm after reviewing it.
108 Thanks
108 Regards
108 xxxx
now my requirement is,i need send a parameter as letter_id to a procedure or function in pl/sql in oracle,the output should be as follows:
if we will pass parameter(letter_id) = 103 then it displays as follows:
Dear MFR
This is in regards to the attached DM List.Please Credit us after reviewing it.
Thanks
Regards,
XXXXX.
if we will pass parameter(letter_id) = 108 then it should displays as follows:
Dear customer,
This is to inform that ur DM List is as follows. Credit us according to the Dm after reviewing it.
Thanks
Regards,
XXXXX.
the procedure for my requirement is like below.now my problem is how to call this procedure in my report.so that if i will send a parameter as letter_id then it should get my report stated above.
CREATE OR REPLACE PROCEDURE letter_text ( p_letter_id letter.letter_id%TYPE , p_letter_contents_out OUT SYS_REFCURSOR )
IS
BEGIN
OPEN p_letter_contents_out
FOR
SELECT letter_content
FROM letter
WHERE letter_id = p_letter_id
ORDER BY line_seq;
END letter_text;
which you might call with something like
SQL> var results refcursor
SQL> exec letter_text(103, :results)
PL/SQL procedure successfully completed.
SQL> print :results;
CONTENT
Dear MFR
this is in regards to the attached DM List
Please credit us after reviewing it
thanks
Regards
EXP
6 rows selected.
so, the same out put i need to get it in a report.
Thanks

Thanks for ur suggestions.
i have 2 select statements.1st query is the main query for the report.so i used it at the time of report created with datablock.
now my 2nd query is
select letter_content
from ( select content_seq,
     content || case content_seq
when 2 then
' ' || lead(content) over (partition by letter_id order by content_seq)
end as letter_content
from exp_letter_contents
     where letter_id = 103)
where content_seq <> 3;
i had taken 2parameters 1 for the main query and 2nd is for the above query(parameter is letter_id).
now i have to write the above select statement in the report.
so i had taken a field object in the report and then i had written this code in before report trigger.
function letter_contentFormatTrigger return boolean is
begin
select letter_content
from ( select content_seq,
                    content ||
                    case content_seq when 2 then
                         ' ' || lead(content) over (partition by letter_id order by content_seq)
                    end as letter_content
          from exp_letter_contents
          where letter_id = 103)
where content_seq <> 3;
return (letter_content);
end;
when i tried to compile it.i got an error as follows :
error 103 at line6,column 5
encountered the symbol "CASE" when expecting one of the following:
(- + mod null <an identifier>
<a double-quoted delimited-identifier><a bind variable> avg...etc
so,where can i write this select statement.
i am using oracle reports6i
Message was edited by:
user579585

How to populate this fields in ce_bank_accounts?

Hey there, first, i want to apologize for my bad english.
i'm working with Cash management and i'm using this API ce_bank_pub because the bank are internals. i have the load from banks and branch, and kinda the bank accounts, but i can´t find how to populate this fields, that are mandatory for my requeriment:
AUTORECON_AP_MATCHING_ORDER
AUTORECON_AR_MATCHING_ORDER
RECON_ENABLE_OI_FLAG
RECON_OI_FLOAT_STATUS
RECON_OI_CLEARED_STATUS
RECON_OI_MATCHING_CODE
AUTORECON_AP_MATCHING_ORDER2
this is my "flow of work", first, i load the data with SQL*Loader in a custom/personal table, after this, i have a cursor that select all the records of this table and do some validations, after this (and if all the records are ok) i use the API ce_bank_pub.
i don't know if that API support those fields, I've read the documentation but can not find what I require.
any help will be appreciate.
thanks a lot.
[SPANISH]
Estoy trabajando con una carga de bancos, sucursales, cuentas bancarias y usos de cuentas, hasta ahorita todo bien, solo tengo problemas al poblar los campos que se muestran en la parte de arriba en la tabla ce_bank_accounts, estoy utilizando el API ce_bank_pub ya que los bancos son internos.
mi procedimiento, o la manera que lo hago es ésta:
cargo los datos con SQL*Loader a una tabla intermedia/temporal por decirlo así, posteriormente un cursor selecciona los datos para realizar las validaciones y las reglas de negocio y si los datos son correctos utilizo el API, eso es en general para las 4 cosas, pero los campos de arriba no se como cargarlo, modificarlos o si hay alguna otra manera para agregarselos.
cualquier ayuda es apreciada.
Muchas gracias.

Hi Miguel,
hope this helps ...
AUTORECON_AP_MATCHING_ORDER - Order of matching statement lines to AP transactions, by transactions first or by batch first, lookup type BATCH_OR_TRX
AUTORECON_AR_MATCHING_ORDER - Order of matching statement lines to AR transactions, by transactions first or by batch first, lookup type BATCH_OR_TRX
AUTORECON_AP_MATCHING_ORDER2 - Order of matching statement lines to AP transactions, by transactions first or by batch first, lookup type BATCH_OR_TRX_OR_GROUP
For all the above three fields, navigate to Lookups from Cash Management responsibility and find the lookup type BATCH_OR_TRX, this will have 3 values, B for Batch, G for Group and T for Transaction ..... pass any one of the three value as per your requirement ..
RECON_OI_MATCHING_CODE - Open interface transactions matching code, T for matching by transaction number, D for matching by date and amount. Lookup type: OI_MATCHING_CRITERIA
For the above field, navigate to Lookups from Cash Management responsibility and find the lookup type OI_MATCHING_CRITERIA, this will have 2 values D for Date and Amount, T for Transaction Number .... Pass any one of the two values as per your requirement ...
RECON_ENABLE_OI_FLAG - Flag to indicate whether to allow reconciliation of statement lines to open interface transactions, Y or N
As per your requirement indicate Y or N ....
RECON_OI_FLOAT_STATUS - Code to specify the float status for open interface transactions
RECON_OI_CLEARED_STATUS - Code to specify cleared status for open interface transactions
I am not sure about the above two ...i.e. the values that needs to be passed ...
Regards,
Ivruksha

How to fetch the query by a report

Post Author: gionnyDeep
CA Forum: Data Connectivity and SQL
How to fetch the query by a report.I need to manipulate it and pass it again to the report.
Any idea?

Post Author: gionnyDeep
CA Forum: Data Connectivity and SQL
I just need to get the query of a report.
You know that a report is buld up on a sql query.I just want to know how to get that query starting by a java ReportClientDocument.
And I found reportClientDoc.getDatabaseController().getDatabase() to fetch DataBase object .After that I do not know the exact sequence of methods for fetch the query
Sorry for my english

How to edit "Credit" field for lots of shots all in once?

I can't seem to be able to know how to edit "Credit" field for lots of shots all in once.
I made a mistake of not focusing on the autofill feature which did put my friend's name instead of mine.
How to correct this mistake without modifying EACH shot been imported alone (and there is plenty of them), I don't know about you but it looks like a total time waste.
Aperture 2.1.3

I apologize,but this is just too much info for me to type.
Go to Help >> Aperture User Manual and read
Working with Metadata Views Page 281
Working with Metadata Presets Page 284
Batch Changing Metadata Page 288
DLS

How to update key fields for table

Hi,
how to update key fields for a table.The update statement is not working for the same.
Regards,

Hi,
See the below example.
TABLES SPFLI.
DATA WA TYPE SPFLI.
MOVE 'AA' TO WA-CARRID.
MOVE '0064' TO WA-CONNID.
MOVE 'WASHINGTON' TO WA-CITYFROM.
UPDATE SPFLI FROM WA.
MOVE 'LH' TO SPFLI-CARRID.
MOVE '0017' TO SPFLI-CONNID.
MOVE 'BERLIN' TO SPFLI-CITYFROM.
UPDATE SPFLI.
CARRID and CONNID are the primary key fields of table SPFLI. All fields of those lines where the primary key fields are "AA" and "0064", or "LH" and "0017", are replaced by the values in the corresponding fields of the work area WA or the table work area SPFLI.
Regards,
raj.

When spanning new tabs (firefox) my users are asked to re-authenticate with pages already signed into. Can you tell me how to fix this issue for firefox users?

With some research I found regedit setting called “TabProcGrowth” that allows tabs to span without re-authenticating with certain browsers. Can you tell me how to fix this issue for my Mozilla Firefox users? Our current version of Mozilla Firefox is: 24.5.0 (x86 en-US). This was first noticed with a product called Confluence that we use in our Tech Support area. Users are having to reenter their password every time they click on a new link in confluence. Any help would be appreciated.
Thank you,

Hi Bernie:
As long as you are accessing your internal server on http:// or https:// then I would expect the normal rules to apply. To see whether some external requests are being blocked, you might try using Firefox's Web Console, Network tab.
You can open the console in the lower part of a tab using either:
* Ctrl+Shift+k
* "3-bar" menu button > Developer > Web Console
* (menu bar) Tools menu > Web Developer > Web Console
Click "Network" on the top bar of the Web Console.
Then use the address bar or a bookmark to launch Confluence in the same tab. Each request made by Firefox should be displayed along with the result. You can click a row for more details.
When I look up "TabProcGrowth" it seems related to the Protected Mode feature of IE8 and newer, which is not (yet) applicable to Firefox. http://blogs.msdn.com/b/askie/archive/2009/03/09/opening-a-new-tab-may-launch-a-new-process-with-internet-explorer-8-0.aspx
However, if Confluence is heavily reliant on plugins such as Flash or Java, that could be a factor because plugins are run out-of-process in Firefox. In that case I suggest checking with Confluence for suggestions.

How to tune this query for the improve performance ?

Hi All,
How to tune this query for the improve performance ?
select a.claim_number,a.pay_cd,a.claim_occurrence_number,
case
when sum(case
when a.payment_status_cd ='0'
then a.payment_est_amt
else 0
end
)=0
then 0
else (sum(case
when a.payment_status_cd='0'and a.payment_est_amt > 0
then a.payment_est_amt
else 0
end)
- sum(case
when a.payment_status_cd<>'0'
then a.payment_amt
else 0
end))
end as estimate
from ins_claim_payment a
where a.as_of_date between '31-jan-03' and '30-aug-06'
and ( a.data_source = '25' or (a.data_source between '27' and '29'))
and substr(a.pay_cd,1,1) IN ('2','3','4','8','9')
group by a.claim_number, a.pay_cd, a.claim_occurrence_number
Thank you,
Mcka

Mcka
As well as EXPLAIN PLAN, let us know what proportion of rows are visited by this query. It may be that it is not using a full table scan when it should (or vice versa).
And of course we'd need to know what indexes are available, and how selective they are for the predicated you have in this query ...
Regards Nigel

I want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged

i want to know that i have recently create an apple id, i want to know that how i can use this id for gsx(without paid) or how to use this id for knowlaged
pls give braef intro about all this things, i have searched on sites but i am not getting exact thing and meaning pls help
and i wnat to complete hardware exam of mac what should i do
thanks
vicckey

GSX, if you're referring to Apple's service by that name, is available only to employees of Apple-authorized service providers or self-servicing accounts. Unless you are employed by such an organization, you cannot access GSX. If you are employed by such an organization, they should set you up and give you the appropriate login information.
If you are interested in becoming a certified Apple hardware technician, you can find information here:
http://training.apple.com/certification/acmt
Please note, though, that certification does not in and of itself give you access to any of the Apple resouces for support organizations; diagnostic tools, parts ordering, etc. You again must be employed by an authorized Apple support provider before you can gain such access.
I have no idea what "knowlaged" might be.
Regards.

How to make a CheckBox for a report parameter?

Hi,
How to make a CheckBox for a report parameter?
thanx

design ur parameters forms using forms and call ur report form there

How to get this information for Conky

Hi people,
My question is how to get this information for show in Conky:
- KDE version.
- Last sync (pacman -Sy) and Last update (pacman -Su)
For the first point could be use a script that execute $ kdesu --version and get information from there.
I have no idea how get information from pacman (may be logs?).
Any ideas?
Thank you.

I have had tremendous success with LUA in Conky on Arch. And all you need to to is put the text HI after the "TEXT" line. ^^;
Examples of my LUA usage:
http://fc02.deviantart.net/fs71/i/2010/ … usLink.png
http://kittykatt.silverirc.com/screens/conky-HUD.png
EDIT: Also, I've had success with getting the KDE version by doing the following...
kwin --version | awk '/^Qt/ {data="Qt v" $2};/^KDE/ {data=$2 " (" data ")"};END{print data}'
This is the method I'm currently using in screenFetch. Tested it a couple of times myself, but besides that, I'm not sure if it will work or not.
Last edited by kittykatt (2010-04-22 17:52:25)

How to fetch this field for my report?

Similar Messages

Maybe you are looking for