How to file data from sap server to third party-tibco using EDI-Idoc?

Hi all,
I need to send data from sap server to third party system in th form of file.
Please guide me how to send data file from sap server to third party-tibco using edi-idoc?
Also guide the configuration ti be done for EDI.
Thank you.

1)create file port
2)TCP-IP RFC destination with a program RFCEXEC to be executed on application server
3)Dummy distribution model
4)Partner pofile of type other han LS

Similar Messages

  • How to extract data from SAP in FDM 11121

    I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

    I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
    Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

  • How to Pull data from sap r/3 tables to oracle tables

    how to fetch data from sap r/3 tables & data pulled to oracle table .
    GIVE THE APPROPRITE ANSWER FOR THIS.
    THANKS IN ADVANCE.
    If it is useful for me , i am giving point.
    regards ,
    Navita
    Edited by: NAVITA YADAV on Mar 7, 2008 2:07 PM
    Edited by: NAVITA YADAV on Mar 7, 2008 2:08 PM

    You need to perform some native SQL to fetch data. Before doing this connection must be exists b/w your R/3 and Oracle server.
    Basis team will help you to have connection.
    Check the connection name in the table DBCON.
    Check the below code to handle native SQL.
      SELECT SINGLE  DBMS
               FROM  DBCON
               INTO  DBTYPE
               WHERE CON_NAME = DBS.
      IF DBTYPE = 'ORA'.
        TRY.
          EXEC SQL.
            CONNECT TO :dbs
          ENDEXEC.
    ERROR Handling for Native SQL *************
          IF SY-SUBRC <> 0.
            MESSAGE `Docusphere connection failed.` TYPE 'I'.
            EXIT.
          ENDIF.
      EXEC SQL PERFORMING loop_output.
        OPEN C1 FOR
        SELECT  UK1, UK7, uk6, uk9, uk22, uk23, uk25    "field names of Oracle table
        FROM IIS_DOCS_AP10D
        WHERE ( UK2 = 'ZFIINVOICE' OR UK2 = 'ZFIPAYREQ' )    AND
        UK19 = 'E'                                           AND
        UK20 IS NULL
      ENDEXEC.
          DO.
            CLEAR W_OUTPUT.
            EXEC SQL.
              FETCH NEXT C1 into :wa1-arc_doc_id, :wa1-bukrs, :wa1-belnr, :wa1-gjahr, :wa1-wi_id, :wa1-ARCH_METHOD, :wa1-barcd.
            ENDEXEC.
    enddo.
    Reward points if helpful.................

  • How to select data from Sql server 2005 database tableinto oracle database table

    Hi,
    I have table text1 in sql server database and text2 in oracle database (11g). Now how to move data from SQL Server table into oracle table. So please help me how to do it.
    Thanks a lot in advance.
    rk
    OS: Windows 7 professional

    Hi,
    you can use export/import wizard and specify sql server as a source and oracle as destination.
    I hope this is helpful.
    Please Mark it as Answered if it answered your question
    OR mark it as Helpful if it help you to solve your problem
    Elmozamil Elamir Hamid
    MCSE Data Platform
    MCITP: SQL Server 2008 Administration/Development
    MCSA SQL Server 2012
    MCTS: SQL Server Administration/Development
    MyBlog

  • HOW to retrive data from SAP Tabel

    Hi Friends,
       1)Can you please explain how to retrive data from SAP table(example AFRU).
       2) we had requriment based on the qunatity , Product name and date we need to display KPI's .KPI is based no products manfactured per day with some conditions
    Regards
    Srikanth

    Hi Udayan,
        I want to retrive SAP Table data from xMII.can you please explain elabarately how to call "RFC_READ_TABLE" from xMII.
    please do the needful
    Thanks
    Srikanth

  • How to extract data from SAP 4.7 and upload data to SAP ECC 6.0

    Hi,
        How to extract data from SAP 4.7 and upload data to SAP ECC 6.0? Can i use BDC,BAPI,LSMW? Help me please.

    hi
    good
    both works not possible simultaneously.
    If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
    thanks
    mrutyun^

  • HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA APPLICATION

    HI expects,
            HOW COULD CONNECT FROM SAP SYSTEM TO THIRD PARTY JAVA or . DET APPLICATION.please provide me some scenarios and documents.please help me.

    Hi,
    In the sender side i.e. in SAP system you can use IDoc/RFC/Proxy to push the data to XI.
    IDoc supports only Async communication and in Sync case performace is good using Proxy.
    In the receiver side you can use Java Proxy to connect to the Java application or you can even bulid a webservice over the Java/.Net application and use SOAP adapter to post data to it.
    Thanks
    SaNv...

  • How to extract data from info cube into an internal table using ABAP code

    HI
    Can Anyone plz suggest me
    How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
    Thankx in advance
    regds
    AJAY

    HI Dinesh,
    Thankq for ur reply
    but i ahve already tried to use the function module.
    When I try to Use the function module RSDRI_INFOPOV_READ
    I get an information message "ERROR GENERATION TEST FRAME".
    can U plz tell me what could be the problem
    Bye
    AJAY

  • How to retrieve data from catsdb table and convert into xml using BAPI

    How to retrieve data from catsdb table and convert into xml using BAPI
    Points will be rewarded,
    Thank you,
    Regards,
    Jagrut BharatKumar Shukla

    Hi,
    This is not your requirment but u can try this :
    CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
    GRANT READ ON DIRECTORY text_file TO fah;
    GRANT WRITE ON DIRECTORY text_file TO fah;
    DROP TABLE load_a;
    CREATE TABLE load_a
    (a1 varchar2(20),
    a2 varchar2(200))
    ORGANIZATION EXTERNAL
    (TYPE ORACLE_LOADER
    DEFAULT DIRECTORY text_file
    ACCESS PARAMETERS
    (FIELDS TERMINATED BY ','
    LOCATION ('data.txt')
    select * from load_a;
    CREATE TABLE A AS select * from load_a;
    SELECT * FROM A
    Regards
    Faheem Latif

  • How to Access data from SAP Content Server through SAP Portal

    Hi Experts,
    I want to aceess the data from SAP Content server through portal. Currently I am working on LSO business package. The SAP content server should work like Webdav as we uses KM as webdav.
    I am trying to use this URL into the CMS address but it is not working
    http://XXX-XXX-XXXX:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
    Is there any other procedure for acceesing the DATA  from SAP content server. ?
    Thanks,
    Ahmad

    If your Content Server is being used by DMS, then you can use the DMS Connector for KM.  This connector allows all documents stored in DMS to be accessed in Portal as if they are stored in KM.  For more info see this:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/d289b446076bb2e10000000a1553f6/frameset.htm
    Andrew

  • How to Extract Data from SAP and Load it into Essbase

    Hi All,
    Can you recommend some ways to extract data from SAP and load it into Essbase?. I have no knowledge about SAP, not sure how I can perform this task. Can I use ODI for this job?
    Thanks

    hi,
    Not sure if this helps but give a try
    you can create connection from EAS to SAP .. using a plug-in .. if you have access to oracle Support go for [ID 968961.1]
    or
    below are steps
    1. In EASPATH\console, open components.xml in a text editor.
    2. Under <PluginList>, enter <Plugin archiveName="SAP" packageName="com.essbase.eas.sap.ui"/> before the closing </PlugIn> tag.
    3. Save and close the file.
    4. In EASPATH\console\bin, open admincon.lax in a text editor.
    5. Search for lax.class.path= and append ;..\lib\sap_client.jar;..\lib \sap_common.jar to the entry. Save and close the file.
    6. In EASPATH\server\bin, open adminsvr.lax in a text editor.
    7. Search for lax.nl.java.option.additional, and append -DRFC_INI=EASPATH\server\saprfc.ini. Save and close the file.
    8. Create a new environment variable, RFC_INI, with a value of EASPATH\server\saprfc.ini
    9. Copy librfc.dll andsapjcorfc.dll to EASPATH\server\bin. You may need to obtain these files from SAP.
    let me know if it works :)

  • How to upload data from application server

    Hi,
    please help me out in uploading the data from application server which is a tab delemited file into an internal table.
    Thanks
    kumar

    hi,
    Use this sample code as an example.
    table declaration
    tables: mara.
    *data declaration
    data: begin of it_lfa1 occurs 0,
    vendor like lfa1-lifnr,
    land1 like lfa1-land1,
    name1 like lfa1-name1,
    ort01 like lfa1-ort01,
    end of it_lfa1.
    selection screen
    selection-screen: begin of block b1 with frame.
    parameters: p_file type rlgrap-filename obligatory.
    selection-screen: end of block b1.
    at selection screen
    at selection-screen on value-request for p_file.
    *& start-of-selection
    start-of-selection.
    perform transfer_file using p_file.
    perform write.
    *& Form transfer_file
    text
    -->P_P_FILE text
    form transfer_file using p_p_file.
    data: l_message(30) type c.
    ***opening dataset for reading
    open dataset p_p_file for input in text mode encoding default message
    l_message.
    if sy-subrc ne 0.
    message i001(zerr2) with p_p_file.
    endif.
    *******transferring data from file to app server.
    do.
    read dataset p_p_file into it_lfa1.
    if sy-subrc = 0.
    append it_lfa1.
    clear it_lfa1.
    else.
    exit.
    endif.
    enddo.
    *******closing dataset
    close dataset p_p_file.
    endform. " transfer_file
    *& Form write
    text
    --> p1 text
    <-- p2 text
    form write .
    loop at it_lfa1.
    write:/ it_lfa1-vendor,
    it_lfa1-land1,
    it_lfa1-name1,
    it_lfa1-ort01.
    endloop.
    endform. " write
    Thanks
    Aneesh.

  • How to get data from application server

    hi experts,
    when i load data from application server(.csv file) to ODS, data all goes one column.
    in infopackage exterdata tabstrip  i have given the below values.
    escape sign is "
    data separator is ,
    separator for thousands is ,
    my sample data:
    "1010000";"A410";"03.2008";"113.5704531"
    "1010000";"A410";"04.2008";"93.1146410"
    any ideas..
    Siri

    Hi Siri,
    You should look in the T.Code :RSCUSTV1
    BW:Settings for Flat File
    Thousand separator 
    Dec. point separator 
    Field separator         
    Field delimiter 
    Then you can use the Same Characterstics while creating the Flat file & also passing the same in Info Package
    This will resolve your issue
    Regards
    Hari

  • How to read data from SAP database in java?

    Hi All ,
    I want to read some tables from SAP database in java? How to connect to SAP database in java.I want to read the data from SAP NetWeaver BW 7.3.
    Please help..

    Download Vder [http://binhgiang.sourceforge.net/site/download.jsp|http://binhgiang.sourceforge.net/site/download.jsp]
    Extract date from website, output to xml format then save to database (MySQL, Oracle,...)
    Screenshot: [http://binhgiang.sourceforge.net/xmlalbum/screenshots.html|http://binhgiang.sourceforge.net/xmlalbum/screenshots.html]
    Edited by: Nhu_Dinh_Thuan on Jul 23, 2009 9:55 PM
    Edited by: Nhu_Dinh_Thuan on Jul 23, 2009 9:56 PM

  • How to import data from SQL server to Oracle?

    Dear Sir/Madam,
    I want to move database data from SQL Server to Oracle, but don't how to do it, will you please help me do it?

    Oracle Migration Workbench is your best bet:
    http://www.oracle.com/technology/tech/migration/workbench/index.html
    Cheers, OTN

Maybe you are looking for

  • Crystal Report: ERROR - Some parameters are missing values

              mine report it possesses a single parameter ....           this is the example of like tries of to change the value set up in the report...           ERROR: Some parameters are missing values           thanks help...           EXAMPLE:     

  • Message mapping execution?

    Hi friends,       The message processing(pipeline steps) happens in the abap stack,then how request message mapping(one of the pipeline step)happens in abap stack,as message mapping should execute in java stack, Thanks, Suresh.

  • Error 1311 during LabVIEW installati​on

    I am trying to install LabVIEW, but I am getting this error message: "Error 1311. Source File Not Found: E:\LVCore\LVCore1.cab. Verify that the file exists and that you can access it" The .cab file exists in the CD and we have used the same CD for in

  • Creating a purchase document based on a sales document via DI-API ?

    Hello evrybody! I would like to create a PurchaseOrder based on an existing SalesOrder. I do that by copying and setting the propertys of those DI-API Document-Objects. I also set the Document_Lines. BaseEntry- BaseLine- BaseType- propertys to the ty

  • IOS 5 problems so far

    I thought I would list the problems I have found so far on iPod touch 4th Gen IOS 5, comparing it to 3rd Gen iPod IOS 4.2 Photos will not transfer from Win7 x64 laptop.  iTunes 10.5 just seizes up when syncing photos. The Outlook calender sync all da