How to file the complaint for GEEK SQUAD installation for car remote and alarm security ?

My name is Benny. I want to install the remote start and alarm in My 2015 Toyota Highlander. before I make an appointment. I go to Bestbuy store and make sure it's compatible with the Viper Responder LC3 5706V 2-Way Remote Start and Security System. Bestbuy print out the document everything say is compatible with my vehicle. and then I make  an Appointment on July 31, 2015, 01:00 PM 4 Hrs162 SANTILLI HWY EVERETT MA Confirmation Number: VRJF2718. it is the lady help me to install it. she say it take 4 to 5 hours to finish. I said I wait here at Bestbuy out there until finish installation. After more than 5 hours. I come in the Bestbuy mobile installation there. and the lady tell me my car is broke fuse link. The vehicle will not start. and also she said she did not touch anything. I ask why the fuse is broke if you did not touch anything. she said the fuse broke all the time. It is normal. My car less than 1400 miles. just like new. My all family use Toyota. 6 year never broke the engine fuse. She try to tell me the fuse link broke is not because the installation process. She try to tell is not her responsibility. She said already call Woburn Toyota repair on Monday. I m so worry about my car. I take the subway to Wellington station and walk to Bestbuy on the next day. and then she tell me the car has to tow to Woburn Toyota to repair. on August 4. I went to Bestbuy with my friends. We talk to the Geek Squad manager I think his name is Jason. He tell me the car can fix and pick up today about 1PM,  I called Woburn Toyota and they tell me pick up my car. after pick up my car. I have to go back to Bestbuy finish the remaining installation because the viper already installed in my car. About 2:30PM. Tom said it take about 20 to 30 minutes to program the key. after Program the key. It has problem to start the engine. Sometime the engine start only a few seconds it shut it down. He don't know how to program the key, the key has the code has to match the car. Tom keep try and try to start the engine until the car battery is dead. and then use the  jump starter to charge the battery. and keep try and try. I don't remember how many time he try to start the engine. it make me very scare. I ask Tom many time about the compatible. He said yes. about 6PM. I talk to the manager, I said do you think will tow my car again. He tell me to talk to Tom. I told Tom I have to use my car tomorrow for work. I paid to much for the cab. And then he take out the Vipers. Wednesday 4:40am in the morning. I drive for my job. I found out the automatic light is not on. it has other issue. The Auto switch is on, but the automatic light is not on. me and my friends went to Bestbuy again and talk to manager. First He said is not my responsibility. You already pick up the car. I m telling you. no one will know the automatic sensor will broke if not drive at night or dark place. I have my KDLINKS X1 FULL HD WIDE ANGLE CAR DASHBOARD CAMCORER WITH GPS install in my car. The installation day is July 31. All drive load recorded. July 31. I drive my friends to China town and get in the Tunnel and then go back to Bestbuy get in the tunnel again. It show the light automatic on. No any problem when I drop on Bestbuy. I have alot Evidence prove. No one touch my new car. Only Geek Squad. I lost money because the Viper Responder LC3 5706V already used. It can't return it. Also I lost time. wait long time in Bestbuy, 4 hours job it take 5 days. I have no car to use. I have to paid the cab for my job. I have to drive my car to Woburn Toyota to see what is broke on 08/7/2015. After 5 hours long wait. The Toyota said Tom forgot to connect the wire.  They said the first time broke the big fuse link and tow to Toyota repair. It is the big problem. It broke because they start the engine more than hundred time. I know because I took the chair and wait inside the second time with Tom. He try to start my engine between 5 second. I know what is troubleshooting. but if you try to start the engine 3 time and not work. You will know is sometime wrong. You have to find out the problem and maybe get help. Not just keep try to start the engine on the remote. I tell Tom even you try thousand time. it could be the same. I know I complaint the first time when they broke my car big fuse. but please don't treat my car like that. I want to ask you. if you take your car there for installation. You wait there more than 5 hours and your new car is broke by them. and you have no car to use for your job. Are you happy about that. Second time he said only take 30 minutes to program the key. It take me wait there 5 hours. He forgot connect the wire. If you don't believe, you can call Woburn Toyota. Everyone know Bestbuy broke my 2015 Toyota Highlander. Bestbuy should reimburse my lost. I lost time and money. The Viper I can't return to other retail store because it used by your company. It fail to install and broke my car. I try to call Geek squad 18004335778 two times and talk to different people. they just hand up my phone after I tell my stories. They never give me the solution. and I know I post the message here may not helpful. I will keep try other way to tell my stories to other if Bestbuy not give me the solution. My phone numbers is {removed per forum guidelines}. 

Thanks your reply. I mean no one know my feeling. except if the new car is your. If Geek Squad can't install it. Just let me know and go. right? I ask many time? Are you ok to finish? He said yes. First time fail after 5 hours long wait and tow my car to Toyota repair. Second time said only take 20 to 30 minutes to program the key. but fail again after about 4 hours 30 minutes long wait and head light is not automatic turn on at night. I have to take a day off drive to Toyota repair. My time is money. wait there more than 10 hours and done nothing. 5 days no car and take the subway Bus and long walk. How do I feel? I m the customer. if without the customer. How you get pay? Geek Squad use my remote start and alarm and I can't return it. I loss time and money. My new car has a repair record. That is what Bestbuy want to do for the customer. Geek Squad work for Bestbuy. right? You are not just loss one customer. You will loss more and more than the remote start alarm cost. Bestbuy will not know? How come just 200$ remote start alarm and the 50$ module. Bestbuy don't want to reimburse. I m not tell you to pay me 5 days for rental car. why don't just want a happy ending? Bestbuy is big company. I m very small. 250$ it cost Bestbuy nothing. You can't let the customer loss money because you. right?

Similar Messages

  • How to file a Complaint with Verizon

    I don’t know how to file a complaint with, or about, Verizon customer service.  After calling Verizon I was shuffled between departments, supervisors, and finally directed to “verizon.com/contactus”.  After spending an hour browsing the “contact us” section of the website, it became abundantly clear that I would not be able to find what I was looking for on the website. 
    A month ago I was in the middle of the moving process and was dreading the seemingly inevitable process of setting up the internet/television/phone, a process that I had to do many times before.  My son had informed me of Verizon’s transfer service, also known as “Moving with Verizon”.  As we were only moving 3 miles down the road, I figured that I would visit my local Verizon store as this would continue to be the store I turn to if I chose to stay with Verizon.  I had several concerns that I wanted to have addressed, chief among them were:
    - I have built up a significant number of movie titles in my digital library.  If I stay with Verizon, will I be able to keep the movies that I had purchased? 
    - Each time I move I am inconvenienced with having to distribute my new phone number to my friends and family.   Will I be able to keep my current phone number if I stay with Verizon?
    - When I first started with Verizon I had significantly less credit with Video on Demand than I do now.  If I stay with Verizon, will I have to go through the grueling process of building up my credit again?
    The sales associate was very kind and willing to help.  I was assured that
    -          I should be able to retain my purchases with Video On Demand
    -          I can bring my phone number from my previous address
    -          My Video on Demand credit could possibly be reset after the transfer, but a single phone call to customer service could set my credit back to normal with minimal effort
    Throughout my questioning I was assured that my current services would transfer uninterrupted by the time of the move.  As you could imagine I was ecstatic.  We scheduled a technician to show up to the new house, when I asked the representative on the phone “What should I do with my current cable boxes and internet router while I wait for the technician?”  I was told that the technician would handle it. 
    The technician arrived two weeks ago, we were given a box and instructed to package the previous equipment and drop it off at our local Verizon store.  The technician gave us our new number, when we asked him about our previous number he appeared to not know what we were talking about.   He was apologetic about the mix up and gave us a phone number that we could contact.  Shortly after the technician left, my family noticed that our digital library was completely empty.  The next day I went back to the Verizon store, was apologized to, and then instructed to only place one order in at a time, because multiple orders on a single account tend to slow each other down.  We decided to resolve the issues one at a time starting with the phone.
    My wife called and was told to wait a day or two.  After waiting two days, my wife informed me that she was bounced between different departments over the course of several days, but was assured that the issue was resolved.  I told my wife that I would handle the future endeavors with Verizon as she appeared to be a little flustered by the experience.  I later received a courtesy call from Verizon confirming that our phone number was restored.  I asked the lady whom I was talking to whether she could help me with my VoD service or transfer me to someone who could.  She assured me that she could help and asked me whether or not we had received new set-top boxes for our televisions. After I informed her of the new boxes, she apologized to me and informed me that due to copyright infringement laws that our digital library was lost and that we could not receive any kind of compensation.  I decided to call customer service, and after talking to representative for almost half an hour I was placed on hold and then told that there was nothing that could be done at this time and that I was going to be disconnected, before I could respond I was hung up on.
    Three nights ago I took my concern back to the Verizon store as I dropped off our previous equipment.  I was given several new phone numbers.  That evening I spent over 2 ½ hours on hold waiting for a representative.  After explaining my situation I was transferred to another representative who worked with me and put in a work order to have our digital library restored.  I was quoted 48 hours, but the issue was resolved that evening. 
    Not intending to cause any more issues with Verizon until our digital library issue was resolved, my family abstained from renting or purchasing any movies from Video on Demand.  I had promised my son and grandson that if the movies were restored, I would add the new Star Trek movie to our library so that we could watch it together. I was slightly irked to realize that when I tried to add a new title to my library an error message would pop up.  I called the number on the message and entered the error code.  I was placed on hold for almost an hour.  When I finally reached a representative, he informed me that the problem was that my credit had been reset during the move and the issue could only be resolved by another department which had just closed for the evening.  I decided to work at home the next day so that I could watch the movie when my son came home that evening.  The next morning I called and realized that the opening time quoted to me was obviously in a different time zone.  When I finally reached an agent, 2 hours later, I was told that I was 5 dollars over my credit limit.  I informed the representative of my situation, as proof I pointed to the fact that the bill that I had paid earlier this week was almost 200 dollars more than my current statement.  I was asked to wait 30 minutes and to call back if the issue hadn’t resolved itself within an hour.  An hour later I called, explained my situation to another representative, and was told to call back in an hour if the problem hadn’t resolved itself.  An hour later I called and after being sent to several different representatives I was asked to call back in an hour if the issue hadn’t resolved itself.
    Meanwhile my wife was contacted at worked by Verizon, informing her that there was no record of us returning the equipment and that we could be facing additional charges if we did not straighten out the issue.  After spending the next several hours assuring my wife and showing her how on the receipt, each piece of equipment was clearly scanned and entered into the system, I decided to call customer service again as my VoD was still displaying the same error message.  I was apologized to yet again, and was told that my order was being slowed down due to a high number of unresolved issues on our account.  I was assured that he would clear out the mess and that we should be able to order movies that evening, if not I should call back in 24 hours.  I apologized to my son and grandson yesterday evening, both of them took it surprisingly well.  This evening I waited until 7:30 to contact customer service (31 hours after I was told to wait 24 hours), I was placed on hold again and again for over an hour and a half.  I finally was told that my account would be cleared out to resolve the issue, I informed the gentleman that I was already told that would be done and then referenced the ticket number that I had received (and double-checked) from the gentleman the day before.  After speaking to his supervisor about the issue I was informed that there was no record of this action nor was there any ticket number matching the one I had given him.  The gentleman tried to help me for several more minutes until he transferred me to another department because neither he nor his supervisors could understand why my account wasn’t letting him change the date on my ticket, as he had reset all my resolved issues. 
    I explained my situation to the representative who after reviewing my account information informed me that I could have had the issue resolved on the 29th of August but someone during my process removed my order.  She then informed me that due to the number of unresolved orders on my account the system could not let her schedule a credit increase until the 26th of September.  After repeatedly asking her what I could do to expedite this process, I came to realize that all she could do was repeat to me the information that she had already said.  I then asked her who I could talk to resolve this issue or file a complaint.  After rambling for several minutes I was then transferred to the billing department.  After explaining my situation, yet again, to another representative, my account was reviewed again, and I was once again informed that I was over my credit limit.  After going into details a little more intimately, I was assured that the earliest that I could receive the credit increase was the 26th of September, and that I should make another payment.  I informed her that I had just paid over $550 dollars on my last bill and had given up the majority of my free time over the last 2 weeks trying to resolve issues that I was assured wouldn’t be a problem by a Verizon representative.   I asked if I could receive a small credit to my account ($30) so that I could just watch the movie and feel like I received a small victory for sacrificing so much of my time.  She informed me that only her supervisor could make that call.  She informed me that I would have to wait around 15 minutes on hold (what’s 15 minutes when I’ve already waited 8+ hours on hold?).  After explaining my situation to Cornell he reviewed my account and then reworded what I had just told him.  He informed me that the department that deals with my issue (the department that just transferred me to billing) was now closed and that I would have to wait until Tuesday (4 days) to have my issue resolved.  After explaining the fruitlessness of dealing with that exact department with the exact information he was trying to send me off with, he placed me on hold for several minutes and then came back and agreed to only meet me half way, a $15 dollar credit.  I was extremely offended.  This is not even 3% of my average bill.  $15 for 2 weeks of unsatisfactory service, in addition to 12+ hours of my personal time in addition to my wife’s time and visiting the Verizon store.  After explaining to Cornell that $15 was less than satisfactory, I asked for an email address or a complaint line.  He agreed with me that it was frustrating and explained to me that it was getting late for his department “almost 11:40 in the evening”, the exact time where I am.  He gave me Verizon.com/contactus, which after reviewing the page, I became insulted.  I have continually followed up with my phone calls and stayed loyal to Verizon, following the instructions of each representative that I have talked to in the last several days.
    Verizon has provided both my family and me with an excellent entertainment package as well as outstanding customer service in the past.  I would like to believe that despite the fact that I was lied to by both a sales representative and a supervisor that my family’s experience over that last few weeks with Verizon is not a common one.  I am more than willing to place this movie order on my next bill, all I ask is that you please help me to enjoy the advertised early release and to enjoy the services I previously had with your company.

    We've been having problem with our Verizon Fios set up since the moment we moved in to our new place. We've had several technicians come through, and then eventualy aftet two weeks of setting up appoitments and calling the customer service folks, they were finally able to resolve the issue. However, the nightmare doesn't end here. Last week, our neighbors switched over to Verizon Fios, and their technician swtiched our cables with theirs ( what a sloppy, lazy, job) meaning that they unplugged everything that was running to our apartments and transferred over to their becuase they didn't want to put in the extra work to chech and make sure that everyone was getting service. After, we had noticed the problem, my husband called  customer service to put in a ticket for the technician to come through and resolve the issue. The ticket was made for Wednesday, Nov 7th, 2013  under ticket number {edited for privacy}, the rep had clealry stated that a technician will come anytime from 3 - 7, which meant that one of us had to be home. My husband took off work and waited for the technician to come through, however, NOBODY showed up. Instead, they told us that they were came at 5 oclock but nobody was home. The same day we called customer service again, and reschudeled to the next day. Thankfully, someone showed up at literally 7pm, meanwhile my husband was waiting at home since 3pm. After hounding them down and calling every hour to make sure that they would show up. Sure enough, they coudn't fix the wiring with out a bucket truck, which the technician mentioned he didn't have since it was already late in the game and eveything was closed. So again, my husband called to make another appoitment, for Saturday, November 9th, 2013, and again, the customer service people  confirmed that someone will show up on this day from 8am-12pm. Guess what!? NOONE came, because NOONE issued a ticket, meanwhile we knew for a FACT that we made an appoitment. It's been one week, and no end to this problem. I am appalled, that a multibillion dollar company such as Verizon has such poor customer service in this area. It is sickening and sad, that noone can come and fix a small issue such as this. I hope that this will be resolved tomorrow, ( as they confirmed that they will come on Sunday) if not we have no other choice but to cancel our services and switch to something else. If only Google fiber was in town, things would have been so much easier, and not OVERPAID, especially now with the CRAPPY service we've been getting. 

  • How to customize the Java Concurrent Program(PO Output for Communication)

    Hi,
    How to customize the Java Concurrent Program(PO Output for Communication)
    I need to add the Line level Ship To Address ,Line Notes and Extended Price fields on Java Concurrent Program.
    Please any body help/guide me in this regard.

    Hi,
    Changing Java Conc. program for "PO Output for Communication" is difficult.
    Actually, if you observe closely, "PO Output for Communication" program uses PO<HEADER/LINES..>_XML views.
    So if you could change these views and add your requireed columns to it, you can automatically see your changes in XML data file.
    See if the following link will you to get there.. http://chandramatta.blogspot.com/
    thanks,
    Matt

  • How to improve the load performance while using Datasources for the Invoice

    HI All,
    How to improve the  load performance while using Datasources for the Invoice . Actually my invoice load (Appx. 0.4 M records) is taking very long time nearly ~16 to 18 hrs  to update data from R/3 to 0ASA_DS01.
    If I load through flat file it will load with in ~20 Min for the same amount of data.
    Please suggest how to improve load performance.
    PS: I have done the Inpo package settings as per the OSS note.
    Regads
    Srininivasarao.Namburi.

    Hi Srinivas,
    Please refer to my blog posting [/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction|/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction] which gives the details about the package size setting for extractors. I am sure that will be helpful in your case.
    Thanks,
    Divyesh
    Edited by: Divyesh Jain on Jul 20, 2010 8:47 PM

  • Hi, Might I know that how to setup the printer setting at InDesign CS6 for the Lable print?

    Hi, Might I know that how to setup the printer setting at InDesign CS6 for the Lable print?

    Label printing isn't something you set up in the print dialog in ID. If your print driver has an n-up feature that might work, but in general you need to create pages of labels to fit your sheets in ID, then print. If you are talking about doing a merge of an address list, read about Data Merge in thehelp files.

  • How to access the pre-delivered XI Integration Content for APO ,SCM or CRM

    Guys,
    Do anyone know how to access the pre-delivered XI Integration Content for APO ,SCM or CRM and load onto the XI server.
    Any inputs in this direction is appreciated.
    Thanks, -Vara.

    Hi VaraPrasad,
    you can try:
    1. https://websmp204.sap-ag.de/swdc
    2. Search for all Categories
    3. type: XI content
    then unpack and the easiest way is to import with the file system:
    http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/content.htm
    and you have the content on your XI
    Regards,
    michal

  • How to get the number of decimal places configured for a site column

    Hi,
    I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
    The column conatins a value, but when retrieved programatically is displayed as 5.00000000  instead of 5.00.
    I am retrieving this column using listitem.Properties[field.InternalName].
    I need to trim the decimals based on  number of decimal places configured for the site column.
    How to get the number of decimal places configured for a site column?
    Thanks in advance,
    dhijit

    Get the field as SPFieldNumber and then check DisplayFormat which returns
    SPNumberFormatTypes
    SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
    SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

  • How to setup the Linksys router E4200 DD-WRT for WVC54GCA

    I don't know how to setup the Linksys router E4200 DD-WRT for WVC54GCA. The DD-WRT is very complcated. Please help!!!!! Also, I have used the TZO.com for the DDNS. Should I setup the DDNS for DD-WRT router??? I used the DDNS for my old model router before. Thanks.
    Solved!
    Go to Solution.

    Hi majekho, that is best be answered by support from the developers at the DD-WRT forums.
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

  • How to track the history of supplier sites used for tax reporting (1099)

    Hi,
    Oracle financials doesn't allow two supplier sites setup as tax reportable sites (Unless one is inactive). Suppose if the supplier uses site1 for the year 2009 and site 2 for 2010 and now there is site3 setup as tax reportable. All three sites were setup in 2009 and all three sites are active. Supplier chosen different sites for each year as their tax reportable site.
    How do we know which site oracle used to send 1099 for 2009 & 2010? How to track the history of supplier sites used for tax reporting (1099) in previous years?
    Thanks in advance.
    Regards,
    Ram

    Would the begin_date, end_date and status columns on HZ_PARTY_SITES_USES be any good? Our R12 installations is too new to have accumulated much data yet, but I would look in those columns first.

  • How to disable the status icon in Skype 4 for Andr...

    Dear Skypers,
    How to disable the status icon in Skype 4 for Android phones?
    The guide on this following support page not working anymore: https://support.skype.com/en/faq/FA12359/how-do-i-enable-or-disable-the-status-icon-in-skype-4-for-a...
    Older version has the option to disable Skype Status and get rid of the Skype icon on Android status bar. But latest 4.4.0.31835 could not disable Skype Status in notifications settings. :/
    Device: Google Nexus 4
    Android: 4.3 JWR66Y
    Skype: 4.4.0.31835
    Please bring back the option to disable the Skype icon on Android status bar. This is the main reason I uninstall Skype. :/
    Kudos to the team, the apps is really smooth and fluid to use. Would be nice if you guys are following the Android Design Principles and using Google Cloud Messaging for push notification to improve User Experience and battery life.
    Kind regards,
    /chrone
    everytime i get ahead, i feel more dead.
    Solved!
    Go to Solution.
    Attachments:
    how to get rid of skype icon on android status bar.png ‏46 KB

    Long click on this notification a sub menu having field "App info" would appear goto App Info. You can goto there by "Manage Apps">"Skype" also. 
    Uncheck Option "Show Notifications" A dialog will open. Don't worry about notifications for now just click OK. Now the notification icon skype has also been removed. 
    Now simply check "Show notification again". After doing this you would get notifications but skype icon would not be shown in the status bar anymore.
    Issue: this is just a trick you need to repeat this every time sign out and sign in again. Mostly you don't do that so no need to worry.

  • How to chage the display name in SC browser for the custome fields?

    Hi,
    I created 2 custom fields for Shopping cart in SRM. How to chage the display name in SC browser for this custome fields?
    Thanks
    Kevin

    Hi Kevin,
    when you have defined your customer fields, you have created new fields in the CUF structures. The labels displayed on the SC screen come from the data element you have assigned to those cust fields in the include structure.
    If you have used a std data element, then you can change its translation (attention, this will impact all structures, tables... abap objects using this data element).
    If you have created a Z data element, then adapt its description accordingly.
    Rgds
    Christophe
    PS: please reward points for helpfull answers

  • How to disable the validity of a particular Role for 100 users, in a single

    Hi
    How to disable the validity of a particular Role
    which is assigned to 100 users. (disabling the role of change the validity of the role )
    at present am doing manually, by entering into each user and changing the validity of the role
    Thanks.

    > How to disable the validity of a particular Role for 100 users, in a single ...
    ... shot?
    Assign a reference user to the 100+ users and create events in the factory calendar which assigns and removes the role from the reference user only.
    The downside is that it is not scalable for many of the same concepts at the same time, because a dialog user can at one logon time only have one reference user assigned to them.
    Cheers,
    Julius

  • HT1343 how to use the options with F10, F11, F11 for turning the sound up or down or mute?

    Hi, I'm Hannah. I'm using a Mac. Can you show me how to use the options with F10, F11, F12 for turning the sound up, or down or mute? Thank you very much

    Normally simply pressing them should do what you want, F10 to mute; F11 to decrease volume; F12 to increase volume. However, it's possible that you have a box ticked in Keyboard preferences which modifies the behaviour of the keys, requiring you to also hold down the Fn key (bottom left key on the keyboard) to enable the function.
    Check System Preferences>Keyboard to makes sure the box indicated in the image isn't ticked.

  • How to create the variable variant in process chains for ip

    how to create the variable variant in process cahins for ip

    Hi venky,
    check these links
    http://help.sap.com/saphelp_nw70/helpdata/EN/c0/980398e58611d194cc00a0c94260a5/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/EN/c0/98038ce58611d194cc00a0c94260a5/content.htm
    bhaskar

  • How long will the Photoshop CS6 Beta be active for?

    Hi
    I would like to know how long will the Photoshop CS6 Beta be active for. As a VFX Artist I will be testing CS6 in a production environment to improve workflow. Some of the features I want to be able to use won't happen for a few weeks yet as I'm awaiting content. I just basically would like to know that If I install CS6 now, will it expire in a few weeks or on 30 days? If it's very limited, I'd rather wait than have it expire on be before I can test it properly.
    Thanks.
    Mike.

    Please see FAQ post regarding beta duration
    Thanks,
    Pattie
    http://forums.adobe.com/message/4209419#4209419

Maybe you are looking for

  • Creation of vendor based on the title

    while creation vendor master record the system is asking title (Individual,company) if iam select individual  vendor name,address........., Afterthat j1id we will give the vendor pan numer, ECC Number so and so If i given vendor name this vendor is b

  • MBP 13' 84% battery?

    I just bought my new MBP 13' and I was wondering what do I do with the battery. I booted it u and setup everything with just the battery but my battery is 84% charged. Does this mean I have a refurbished model or is this normal. This is my first time

  • Can't find contacts using airdrop (iphone6)

    I cannot access any contacts using airdrop

  • Looking to create file based socket server (like mysql.sock)

    Hello, I am fairly new to Java and have been trying to find the way to develop a very simple socket server, but one that listens/writes to a file rather than something that is bound to a port number. This would be like mysql.sock type functionality w

  • Color range selection + layer styles

    Hello-- Help me if you can! I have had it on good authority (my photoshop instructor) that color range selection hasn't been working correctly for some time. I'm using CS2, version 9.0.2 on an IMac os X version 10.5.8. I am often working with multipl