How to fill pre-defined tables in Word 2003 with test results?

Hi All,
I have a simple test board , where i measure different DC levels, with a simple Vi that saves the test results in to a Text file.
These results in text file, were manually typed in to a test report , which is a Word document with tables, but i have now created a macro in word 2003 that can take the results from text file and added to the specific rows and columns in my word test report file.
The big questions is how can i get Labview to,after it has measured the DC levels, write the test results to the specific tables , rows and columns, in the Word document without deleting all?
The attached picture illustrates one tables , and the yellow cells showing the cells that need to be filled in with test results.
Labview vers: 2009
Solved!
Go to Solution.
Attachments:
Template.jpg ‏37 KB

Hi!
I'm a Test Engineer for electronics and I create alot of automated tests with LabVIEW. Many of our customers want testsresults in a fancy and easy-to-read report. I did not have the MS Office Report Generation tool. So I did some research in the Excel Board and came a cross a link to a free open Excel toolkit ( Link ). The toolkit looks like this in LabVIEW:
As you can see, you have many tools to get the job done. I'm talking about reading, writing and formatting Excel. The toolkit uses activeX. If you give me a few minutes I'll create an example for you.
What I do when I create a report:
Step 1. Create a template with all your formatting, macros, images and colors. Name the file for example "template.xlsx" (or .xls if you use an older office version).
Step 2. In your program, copy the file to the desired location and give it a proper name.
Step 3. Aquire some data and write it to the file you copied and renamed.
For my latest project I created a fully-automated testprogram for testing a electric product. After each test a report is generated based on the procedure above. After testing all the products I have for example 300 reports. I then created a program that reads all the reports and creates a summary report that contains statistics for all the tested products. In my program I can also print the reports or the summary report and deliver to our customer. All this takes just a few seconds and adds extra quality to the products we sell to our customer.
Regards,
Even
Certified LabVIEW Associate Developer
Automated Test Developer
Topro AS
Norway

Similar Messages

How can I pre-define the default selection in a SelectOneChoice?

How can I pre-define the default selection in a SelectOneChoice?
(1) Here's my JSF-code:
<af:selectOneChoice label="#{res['usercreate.input.sex']}"
value="#{bindings.Sex.inputValue}"
binding="#{SelectListBean.sexlist}"
readOnly="false" autoSubmit="false">
<af:selectItem label="#{res['data.sex.women']}" value="1"/>
<af:selectItem label="#{res['data.sex.man']}" value="2"/>
</af:selectOneChoice>
(2): manged bean: to set the default value to be the first in the list, my managed bean as follows:
import oracle.adf.view.faces.component.core.input.CoreSelectOneChoice;
public class MBSListBean {
private CoreSelectOneChoice sexlist;
public MBSListBean() {
public void setSexlist(CoreSelectOneChoice sexlist) {
this.sexlist = sexlist;
this.sexlist.setValue(1);
public CoreSelectOneChoice getSexlist() {
return sexlist;
(3) when i launch the page, it often gives me such warnings:
WARNUNG: Could not find selected item matching value "1" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=_id7]
how to solve the problem ?
Thanks,
wzzdx

You could also set the default on your entity or viewobject, in the properties of your attribute.

How to fill the whole screen of my iMac with the photos included in an iDVD project. (iDVD v. 7.1.2)

How to fill the whole screen of my iMac with the photos I included in an iDVD project. (iDVD v. 7.1.2). I mean, during playing the burned dvd.
When I do "Enter Full Screen", the slide show fills the screen but the photo itself remains in the middle with a wide black border filling the rest.
Any cure for this ?

Hi
In iDVD Preferences - Turn off - TV-Safe area - and the Photos will fill the full area with just letterboxing or pillars as max.
Then "Save as a DiskImage" and test this and see if this plays better - before burning DVDs that's not as You want them.
Bengt W

I am trying to create a print ready PDF from a word file with unacceptable results.

I am trying to create a print ready PDF from a word file with unacceptable results.
The word file has a trim size of 6” x 9”. It has been set to mirror margins with the inner, top and bottom margins set to 0.75”, the outer margin is set to 0.5” and the gutter to 0.14”.
It doesn’t matter if I create the PDF from inside Word, or open Acrobat Pro 11.0.9 and click Create From File, while the resulting document size is correct and the odd numbered pages reflect the correct margins, the even numbered pages do not. This results in some text near the outer margin, as well as the page numbers being omitted.
Does anyone know how to correct this?
I just noticed that some of the odd numbered pages' text is also cropped. Apparently Acrobat is refusing to set side margins to smaller than 1" (@ 3cm).

I'm away from my printer, so I'll try it later. Even so, the proposed test is irrelevant. I operate a small publishing house and am trying to upload certain novels to Ingram, the largest book distributor in the world. The specifications I've set are the specifications they've asked for. Since they've said that the results I'm obtaining are unacceptable, and since they demand submission in PDF form, this renders Acrobat Pro for Mac completely unacceptable for anyone in the publication industry. As far as I can tell, Adobe has a serious bug here that it needs to fix—and at once.

How to reference a pre-defined table type in entity definition

I have a Table Type brc.sapere.gso.DDL::domain.TIME_PERIOD defined.
I try to use it in an entity definition. (dbcommon.hdbdd is attached.)
But there is an error saying
ERROR brc/sapere/gso/DDL/dbcommon.hdbdd
CDS activation failed;Full qualified names are not allowed
How can I reference the table type?

Kalhari wrote:
Hi, Thanks, but I've seen this. What I need to know is if there is a way to map "user defined table type" specifically, which is a new SQL type introduced with SQL 2008.1. Depends on the database.
2. Depends on the JDBC driver
3. Depends on JDBC spec that it being used.

How to fill a hashed table ?

Hi,
In my last thread i had asked about the ways of deleting the cube contents selectively using a job/FM and i was suggested this by one of you.
CALL FUNCTION 'RSDRD_SEL_DELETION'
EXPORTING
I_DATATARGET = 'YOUR_CUBE'
I_THX_SEL = L_THX_SEL
I_AUTHORITY_CHECK = 'X'
I_THRESHOLD = '1.0000E-01'
I_MODE = 'C'
I_NO_LOGGING = ''
I_PARALLEL_DEGREE = 1
I_NO_COMMIT = ''
CHANGING
C_T_MSG = L_T_MSG.
Although the FM is the correct one the structure L_THX_SEL is a hashed table structure and i am not aware how to fill values into it. My requirement is to give a condition for the 0CALDAY info-object i.e 0CALDAY < 30 days. Please suggest me.
Regadrs,
Pramod M

HI,
Internal Tables
Internal tables provide a means of taking data from a fixed structure and storing it in working memory in ABAP. The data is stored line by line in memory, and each line has the same structure. In ABAP, internal tables fulfill the function of arrays. Since they are dynamic data objects, they save the programmer the task of dynamic memory management in his or her programs. You should use internal tables whenever you want to process a dataset with a fixed structure within a program. A particularly important use for internal tables is for storing and formatting data from a database table within a program. They are also a good way of including very complicated data structures in an ABAP program.
Data Type of an Internal Table
The data type of an internal table is fully specified by its line type, key, and table type.
Line Type
The line type of an internal table can be any data type. The data type of an internal table is normally a structure. Each component of the structure is a column in the internal table. However, the line type may also be elementary or another internal table.
Key
The key identifies table rows. There are two kinds of key for internal tables - the standard key and a user-defined key. You can specify whether the key should be UNIQUE or NON-UNIQUE. Internal tables with a unique key cannot contain duplicate entries. The uniqueness depends on the table access method.
At tables with structured row type, the standard key is formed from all character-type columns of the internal table. If a table has an elementary line type, the default key is the entire line. The default key of an internal table whose line type is an internal table, the default key is empty. At tables with non-structured row type, the standard key consists of the entire row. If the row type is also a table, an empty key is defined.
The user-defined key can contain any columns of the internal table that are no internal table themselves, and do not contain internal tables. References are allowed as table keys. Internal tables with a user-defined key are called key tables. When you define the key, the sequence of the key fields is significant. You should remember this, for example, if you intend to sort the table according to the key.
Table type
The table type determines how ABAP will access individual table entries. Internal tables can be divided into three types:
Standard tables have an internal linear index. From a particular size upwards, the indexes of internal tables are administered as trees. In this case, the index administration overhead increases in logarithmic and not linear relation to the number of lines. The system can access records either by using the table index or the key. The response time for key access is proportional to the number of entries in the table. The key of a standard table is always non-unique. You cannot specify a unique key. This means that standard tables can always be filled very quickly, since the system does not have to check whether there are already existing entries.
Sorted tables are always saved sorted by the key. They also have an internal index. The system can access records either by using the table index or the key. The response time for key access is logarithmically proportional to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique or non-unique. When you define the table, you must specify whether the key is to be UNIQUE or NON-UNIQUE. Standard tables and sorted tables are known generically as index tables.
Hashed tables have no linear index. You can only access a hashed table using its key. The response time is independent of the number of table entries, and is constant, since the system access the table entries using a hash algorithm. The key of a hashed table must be unique. When you define the table, you must specify the key as UNIQUE.
Generic Internal Tables
Unlike other local data types in programs, you do not have to specify the data type of an internal table fully. Instead, you can specify a generic construction, that is, the key or key and line type of an internal table data type may remain unspecified. You can use generic internal tables to specify the types of field symbols and the interface parameters of procedures . You cannot use them to declare data objects.
Internal Tables as Dynamic Data Objects
Internal tables are always completely specified regarding row type, key and access type. However, the number of lines is not fixed. Thus internal tables are dynamic data objects, since they can contain any number of lines of a particular type. The only restriction on the number of lines an internal table may contain are the limits of your system installation. The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes. A more realistic figure is up to 500 megabytes. An additional restriction for hashed tables is that they may not contain more than 2 million entries. The line types of internal tables can be any ABAP data types - elementary, structured, or internal tables. The individual lines of an internal table are called table lines or table entries. Each component of a structured line is called a column in the internal table.
Choosing a Table Type
The table type (and particularly the access method) that you will use depends on how the typical internal table operations will be most frequently executed.
Standard tables
This is the most appropriate type if you are going to address the individual table entries using the index. Index access is the quickest possible access. You should fill a standard table by appending lines (ABAP APPENDstatement), and read, modify and delete entries by specifying the index (INDEX option with the relevant ABAP command). The access time for a standard table increases in a linear relationship with the number of table entries. If you need key access, standard tables are particularly useful if you can fill and process the table in separate steps. For example, you could fill the table by appending entries, and then sort it. If you use the binary search option (BINARY) with key access, the response time is logarithmically proportional to the number of table entries.
Sorted tables
This is the most appropriate type if you need a table which is sorted as you fill it. You fill sorted tables using the INSERTstatement. Entries are inserted according to the sort sequence defined through the table key. Any illegal entries are recognized as soon as you try to add them to the table. The response time for key access is logarithmically proportional to the number of table entries, since the system always uses a binary search. Sorted tables are particularly useful for partially sequential processing in a LOOP if you specify the beginning of the table key in the WHEREcondition.
Hashed tables
This is the most appropriate type for any table where the main operation is key access. You cannot access a hashed table using its index. The response time for key access remains constant, regardless of the number of table entries. Like database tables, hashed tables always have a unique key. Hashed tables are useful if you want to construct and use an internal table which resembles a database table or for processing large amounts of data.
If help full please give me max Reward

How to use pre-defined scenarios for RosettaNet with XI 3.0

Hi all.
   I am working in Comgroup Shanghai co. ltd. which is partner of SAP China.
   We have a potential customer who use RosettaNet as their Supply Chain EDI system.
   I would like to make a demo for demostrate the pre-defined scenarios for RosettaNet RNIF 2.0 packages.
   Where can I find such guideline ? I have checked the article: implementing RosettaNet with XI 3.0, but it cannot help me.
   Another question is how I can develop my own scenarios for the RNIF standards which are not included in XI RosettaNet business package ?

Hi Andy,
See the instructions below after you installed the RosettaNet STK.
Below given is the sample config for PIP3B2 Scenario. Part I is using STK and Part II is using 2 XI systems.
<b>Part I. Test Using STK</b>
In your XI ID:
1) Define both the parties 1) Shipper(Your Partner) 2) Receiver(Your company) with identifiers like DUNS Number.
2) In ID goto>Tools>Transfer Integration Scenarios from IR-->select the scenario "PIP3B2_Receiver" from the drop down list.
3) Follow the 4 steps in the config wizard.
4) While creating your CC, create it from the channel template delivered with the RosettaNet BP.
   4.1) Specify the URL for STK which should be in the following format
http://<STK Server>:<port>/rosettanet/servlet/listenerServlet?userId=<Party Name>
   4.2)In the location fields, enter your location and your partner location.
In your STK
1) Start the RosettaNet STK.
2) enter the UserID<Partner Name in XI>
3) Select the Test Scenario, 3B2V01.01-AdvanceShipmentNotification-0001-Scenario-Shipper
4) Enter Global Business ID(DUNS Number) and Location ID for both the partners. These fields should be same as in your R/3 Party configuration.
5) Enter the URL as follows:
http://<XI Server:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
If everything is configured correctly as mentioned, you should be able to test your single-action scenario.
<b>Part II Test using another XI System</b>
For these follow the steps above for XI Config.
Configure one XI System as PIP3B2 Shipper using the Scenario "PIP3B2_Shipper" and config wizard as mentioned above.
Configure the other XI as PIP3B2 Receiver using the scenario "PIP3B2_Receiver" and config wizard.
In the Url field, specify the URL as follows:
http://<XI host>:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
Hope this helps.
Regards,
Sam Raju

HOW TO TRANSFER USER DEFINED TABLE DATA IN NEW DATABASE

Dear all , I am trying to transfer user defined table data,in new database ,can you please tell how i can do it

Thanks for Quick responce
I have Following databases
1) Targate Database EOU TEST
2) Source database STI_BLANK
Table @MACHINE
I tried But it has some error
INSERT INTO EOU TEST.@MACHINE
SELECT STI_BLANK.@MACHINE* FROM STI_BLANK.@MACHINE
Edited by: Abhijit Bhise on Apr 1, 2010 3:27 PM
Edited by: Abhijit Bhise on Apr 1, 2010 3:28 PM

How to fill a hashed table structure

Hi,
In my last thread i had asked about the ways of deleting the cube contents selectively using a job/FM and i was suggested this by one of you.
CALL FUNCTION 'RSDRD_SEL_DELETION'
EXPORTING
I_DATATARGET = 'YOUR_CUBE'
I_THX_SEL = L_THX_SEL
I_AUTHORITY_CHECK = 'X'
I_THRESHOLD = '1.0000E-01'
I_MODE = 'C'
I_NO_LOGGING = ''
I_PARALLEL_DEGREE = 1
I_NO_COMMIT = ''
CHANGING
C_T_MSG = L_T_MSG.
Although the FM is the correct one the structure L_THX_SEL is a hashed table structure and i am not aware how to fill values into it. My requirement is to give a condition for the 0CALDAY info-object i.e 0CALDAY < 30 days. Please suggest me.
Regadrs,
Pramod M

Hello,
I will recommend you to use the program 'RSDRD_DELETE_FACTS'. This is easier and is generated for individual cubes and u can specify condition for the same with help of variants. Just follow the below steps
Goto SA38 and execute the program RSDRD_DELETE_FACTS. Then give your cube name and select the generate selection program radiobutton and give the name for the program. Execute and the program for selective deletion will be generated for that cube.
Now goto SE38 and select ur generated program for editing. You will see at the end that individual characteristic have a set of code as below:
IF NOT C011[] IS INITIAL.
CLEAR L_SX_SEL.
L_SX_SEL-IOBJNM = '0CALDAY'.
LOOP AT C011 .
    CLEAR L_S_RANGE.
    MOVE C011-SIGN TO L_S_RANGE-SIGN.
    MOVE C011-OPTION TO L_S_RANGE-OPTION.
    MOVE C011-LOW TO L_S_RANGE-LOW.
    MOVE C011-HIGH TO L_S_RANGE-HIGH.
    MOVE RS_C_TRUE TO L_S_RANGE-KEYFL.
    APPEND L_S_RANGE TO L_SX_SEL-T_RANGE.
ENDLOOP.
INSERT L_SX_SEL INTO TABLE L_THX_SEL.
ENDIF.
You need to search for 0CALDAY Code. It will look like above.
Now above all this IFs for characteristics, you can write the code for selective deletion.
The code will be like below.
DATA: date TYPE D,
      date1 TYPE D,
      RUN_MN1 TYPE /BI0/OICALDAY,
      LE_CO11 LIKE LINE OF C011.
date = sy-datum.
date1 = date - 30.
RUN_MN1 = date1.
LE_CO11-SIGN = 'I'.
LE_CO11-OPTION = 'LT'.
LE_CO11-LOW = RUN_MN1.
CLEAR C011.
APPEND LE_CO11 TO C011.
Hope this helps.
Regds,
Shashank

How to create pre-defined folder in the document sharing iView in a room?

Hi everyone,
As title, I would like to know how to create some pre-defined folder(s) in the document sharing iView in a collaboration room?
Hope you someone can help me~~
Thanks and best regards,
Marcus

Try it like this:
Help with collaboration rooms templates
and here are soem of those docs:
http://media.sdn.sap.com/public/KMKeywords/Collaboration-Room.html
Regards,
Darin

How to set pre-defined constants via FXML

Does anymode know how to set a pre-defined constant like javafx.scene.control.Control.USE_PREF_SIZE via FXML when you create a node?
Instead of using a fixed value like this
   <Label text="Last Name:" minWidth="100" />I would like to use one of the predefined sentinel values like this.
   <Label text="Last Name:" minWidth="USE_PREF_SIZE" />The above example does not seem to work and I have the feeling that this is currently not possible at all.

How did you get that working? When I use the following file I only get a warning that "javafx" is not defined.
Defining var A seems to work but it fails on var B. It seems to be impossible to access anything outside the
java... hierarchy. Is there anything else you have to define?
<?xml version="1.0" encoding="UTF-8" ?>
<?language javascript?>
<?import javafx.scene.*?>
<?import javafx.scene.layout.*?>
<?import javafx.scene.control.*?>
<StackPane xmlns:fx="http://javafx.com/fxml" >
     <fx:script>
          var A = java.awt.Component.BOTTOM_ALIGNMENT;
          var B = javafx.scene.control.Control.USE_PREF_SIZE;
     </fx:script>
</StackPane >

How to fill depended Z-Table, created by Rapid Application Tool, with initial data?

Hello gurus,
I created a component ZBOOKING with RAD Tool and will fill booking detail table with initial data during a creation of new booking objekt.
My Booking component looks like on the picture below. It was created with Rapid Application Tool and is based on one ZBOOKING Table with was created in CRM Backend and one “Booking details” Table with was created with Rapid Application.
My Question is how should I populate initial Template-Data to this dependent “booking details” Table wenn I will create a new booking object.
Web UI of ZBooking component
Component structure of ZBooking
I have tried to do sample implementation in do_init_context method of ZACL_CLASS00000C_IMPL class to fill ZBOOKING_DETAILS with some data.
method DO_INIT_CONTEXT.
CALL METHOD SUPER->DO_INIT_CONTEXT.
DATA: lr_col TYPE REF TO if_bol_bo_col,
lr_valuenode TYPE REF TO cl_bsp_wd_value_node,
lr_template TYPE REF TO ZBOOKING_DETAIL.
CREATE DATA lr_template.
CREATE OBJECT lr_valuenode
EXPORTING
IV_DATA_REF = lr_template.
if lr_valuenode is BOUND.
lr_valuenode->SET_PROPERTY_AS_STRING(
iv_attr_name = 'ZZVISITDATE' "#EC NOTEXT
iv_value     = '01.01.2014'
ENDIF.
CREATE OBJECT lr_col TYPE cl_crm_bol_bo_col.
lr_col->ADD(
exporting
iv_entity = lr_entity
IV_SET_FOCUS = ABAP_TRUE
me->TYPED_CONTEXT->ZBOOKING_DETAIL->SET_COLLECTION( lr_col ).
endmethod.
After this implementation the initial data is displayed in “Booking details”.
However if I press an Edit-List-button (Assignment block) I get an error “CUST Operation”.
May be I should fill this depented table ZBOOKING_DETAILS without cl_bsp_wd_value_node?
Where should I implement logic if I want to fill initial data just during creation of booking object and not every
time when the booking object is called or initialized?
Regards Dmitry

Hi,
I get an error "Dereferencing of the NULL reference" during created_related_entity.
If you see on the picture below I think that I use right relation name for my zbooking_detail table.
method DO_INIT_CONTEXT.
CALL METHOD SUPER->DO_INIT_CONTEXT.
data :   lr_leading_entity TYPE REF TO cl_crm_bol_entity,
            lr_col TYPE REF TO if_bol_bo_col.
           lr_leading_entity->create_related_entity(
                  iv_relation_name = 'ZAET_CA_ATAB000000' ).
           lr_leading_entity->SET_PROPERTY_AS_STRING(
                       iv_attr_name = 'ZZVISITDATE' "#EC NOTEXT
                       iv_value     = '01.01.2014'
lr_col->ADD(
   exporting
     iv_entity = lr_leading_entity
     IV_SET_FOCUS = ABAP_TRUE
me->TYPED_CONTEXT->ZBOOKING_DETAIL->SET_COLLECTION( lr_col ).
endmethod.
Many Thanks & Regards,
Dmitry

How to fill set up tables with out missing the delta records

Hi,
I would like fill set up tables in the productioon system of apllication of logistics.
Can you please guide me how do we perform.?
What are points to be considered?
Because,when i start the filling set up table by 10.AM if there are any posting at 10:05,10:06....like that
how can collect them i.e will i miss any records in second delta run?What setps to be taken care?
Thanks in advance
Naresh.

Hi.
You can fill the set-up tables during normal operation hours ,if you load the data into ODS and the update queue is 'Queued delta' .Downtime is needed to avoid the duplicates .But if you use 'Direct delta' you miss the delta documents. Hence it is better to go for downtime approach for this case.
Initially your delta records will be stored in the extraction queue and then when you run the collective job, records will be moved into delta queue. You can run the collective job (LBWE) anytime after the init run.If you need a daily delta ,then schedule this job before the delta loading. You can schedule this job either hrly or daily .This will move your records into delta queue. At the time of delta loading ,all your delta queue records will be moved into BW .
Thanks.

How to Execute User Defined Table in SQL?

Hi Experts
I have User Defined Table @SIN_MPLN in SAP B1 , i stored value in that User Defined Table and if i execute that Table Through Query Generator it shows me value. it works fine.
But when i go to SQL Server 2008 R2 and trying to execute this as..
select * from @SIN_MPLN
then it gives me Error --> Must declare the table variable "@SIN_MPLN"
so please give me the answer
Thanks

Hello Navanath,
Nagarajan's answer is correct.
select * from [@SIN_MPLN] wil also work. the prefix "dbo" is not mandatory.
Best Regards Teun

Importing tables from Word 2003 into Robohelp for word ^

Does anyone know how to import tables and boxex from Word
2003 nicely into Robohelp 6

You can capture the table from your original word.doc and
save the image as either a bmp or gif file. In robohelp, insert the
picture where you want it to be located at. Have the table act as
an image.

How to fill pre-defined tables in Word 2003 with test results?

Similar Messages

Maybe you are looking for