How to find all condition records

HI,
How can I find all the condition records for a combination of sales organization, distribution channel and matnr.
In a condition table we can find only current valid condition record. I want to display all the valid condition records for this combination. I find one field in KONH table with VAKEY where we can give these values. Is it correct process?
What is difference between condition header and item levels? ie. whether one condition number can have different materials prices as items? if so the above logic wont work. So can you please clarify.
Thanks in advance.
with many regards,
Vamsi

Ya now I have understood what you are talking about.
The fields in the header level and first field in the item level usually is formed based on the access sequence you select. Eg) If you choose PR00 with access sequence Sales Org / Dist Chnl / Material you would find the Sales Org and Dist Chnl as part of the header level and the material at the item level.
The significance of the item level is that you can maintain different records for the header level data entered, however the item level field has to change. In our example if you need to maintain the price of 10 products for the same Sales Org and Dist Chnl you can do so by entering one after the other.So your header level would contain the Sales Orgn say 0001, Dist Chnl 01 while you can maintain the value for M1, M2....M10 in the same screen.
If you enter a record where the combination of the header field and first field in the item level already exist in the same screen the system would then give you an error message "The condition is being processed in the current session" and would remove the second record. You can try this out my entering the material M1 twice in the same screen of VK11.
Hope it helped you. Do let me know if you have any doubt.
Regards
NP

Similar Messages

How to update all condition records at a time with some percentage or some

Dear Sir,
In PRD system we have more than 600 condtion records.
Noe desiel hikes happend, due to that client want to update all condition records(600) at a time with required percentage or required value.
How to update all records at a time
With regards
Lakshmikanth

Hi,
Through BDC or LSMW first you have to do the recording for particular transaction code and then base on that u have to prepare the flat file to upload the file for the same.
For BDC programing you have to take the help of ABAP progmer but LSMW you can also do.
For more information about LSMW plz go to following link :
[LSMW |http://www.slideshare.net/arun_bala1/sap-sd-lsmw-legacy-system-migration-workbench/]
[Step-by-Step Guide for using LSMW|www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc ]
BDC
[BDC Call Transaction|http://www.sapdevelopment.co.uk/bdc/bdc_ctcode.htm]
[BDC Recording|http://www.sapdevelopment.co.uk/bdc/bdc_recording.htm]
But it would be better for you to please contact to your ABAPer for BDC programming.
Cheers...

How to find the particular record in 1000's of workflow jobs are running

Hi,
In a data manager -> in workflow tab>IF a record is in CHECK-OUT MODE there are 1000's of jobs are running in that workflow tab. Can anyone tell me how to find that particular record in that workflow jobs.
Can anyone show me the difference in getting a record in 5.5 and 7.1

Hello COTI
Unfortunatly, SAP MDM doesn't have good ability for WF search.
All WF clarify by it's status (unlaunched, avialable, Received, complited, error etc.)
For each WF SAP MDM assing unique Job ID and this id will be shown in Job ID field in Data Manager WF Tab.
You can change WF list order by all WF fields like as Job ID, Step, User, Start etc. and try to find your's WF.
You can use Java API - this is one of the best solution for WF management and WF mass upload (for example)
Regards
Kanstantsin Chernichenka

How to find all solutions for reordering of vector

hello everyone
-I have problem in finding all possible solutions for reordering of vector.
-I have vector named (vect_temp) and I want to find all possible reordering of this vector.
-I have function named Min_diff(vect_temp,next_point) works as follows : I should gave it an element (next_point) in the vector (vect_temp) and it must generate the vector (vect_diff) that contains all possible elements next elements.
-The function nex_min(vect_temp,next_point) works as follows : I should gave it an element (next_point) in the vector (vect_temp) and it must generate the vector (vect_min) that contains all possible elements next elements.
-reordering critriea:
-Min_diff(vect_temp,next_point) and nex_min(vect_temp,next_point) and (next_point) in this first iteration is equal to any selected element in the (vect_temp). after calling the functions, if element in the (vect_diff) is equal to the element in ( vect_min) then add this element into the ordered set [ vec_ordering] and call functions Min_diff(vect_temp,next_point) and nex_min(vect_temp,next_point) again , next_point now is the equal to the element that we have been added in the previous step into the ordered set [ vec_ordering] and repeat this process until all elements in (vect_temp) are ordered according to this criteria.
- I'm able to do reordering according to the cirtira above and find one solution. but the problem is that if (vect_diff) contains many elements that equal to many elements in ( vect_min), in this case I need to do reordering for the first equal element and this will be one solution and then find reordering for the next equal element and so on.
let's consider this example:
- let (vect_temp) contains element [5,9,7,3,1]
- for the firs iteration let the next_point equal to 7
- after calling function Min_diff(vect_temp,next_point), then (vect_diff) will contain [ 5,9,3]
- after calling function nex_min(vect_temp,next_point), then ( vect_min) will contain [ 5,9]
so for now (vect_diff) and ( vect_min) will have two equal elements.
- the first solution must be that fist take the first equal element and do reordering such that ordered set [ vec_ordering] will equal to [7,5] then call functions Min_diff(vect_temp,next_point), and nex_min(vect_temp,next_point) again. the( next_point) in this iteration is qual to 5, these funtions will find next elements, let's consider that (vect_diff) and ( vect_min) will have equal element [3] then add this element to the ordered set [ vec_ordering] and repeat calling functions util all elments in (vect_temp) are added to the ordered set [ vec_ordering]. This will be one solution. now the second solution will be is to take second equal elment [9] instead of [5] and continue calling functions and finding ordered list.
so that each time vect_diff and vect_min will have many equal elements, then do reordering for first equal element this is one solution and then do reordering for the second equal element and so on.
-my code that can only find one solution that takes only first equal element in (vect_diff) and ( vect_min) and continue ordering is below
for (int y = 0; y < vect_temp.size(); y++) {
     Min_diff(vect_temp);
     nex_min(vect_temp, next_point);
    for (int i = 0; i < vect_diff.size(); i++) {
     String element_min = vect_diff.get(i).toString();
     if (vect_min.contains(element_min)) {
       vec_ordering.add(element_min);
     _2nd_min_element = element_min;
      vec_temp.removeElement(next_point);
      next_point = _2nd_min_element;
      i = vect_diff.size();
     }// end if condition
    } // end for (i)loop
}// end for (y) loop
I hope that someone can answer me how to find all posssible reordering set it is urgent pleasssssse

DarrylBurke wrote:
Two months on and you still haven't done your own homework?
[http://forums.sun.com/thread.jspa?threadID=5423090]
dbWell, nobody has given the answer yet, so how can (s)he?

How to use upload condition record program RV14BTCI

Hi
how to use upload condition record program RV14BTCI.
kathir.

Hi,
To run this program we have to maintain Upload file in Application Directory,
We have to maintain 3 levels of records in that file.. my feel you upload through BDC or LSMW.
For your information,
The batch input program RV14BTCI reads the parameters is necessary
Giving sequential file and creates (depending on the data
In the file seq) one or more batch input sessions.
The data are seq file in the following structure expected:
- The session a session intent (Table KOBTCI, Record 0)
All other records until the next session, the intent
Last session assigned to read
- The head condition Sentence (Table KOBTCI, record 1)
All other records until the next condition,
Last read head appropriate rate
This includes the corresponding condition
Condition table
- The key sentence of a Main (Table KOBTCI, record 2)
It must be directly on the head set to follow
It contains the key condition of the table
+ Detail fields
- The season record has a subordinate clause (Table KOBTCI, record 3)
The teams relate to the key sentence in the main
Best Regards,
KSK

How to maintain a condition record for a output type ?

Hi All
How to maintain a condition record for a output type ?

Hi,
Goto NACE and there is a button for maintiaining the Condition Reocrds.

How to Delete the condition record in CRM

HI,
Can you please help me how to delete the condition record from condition table in CRM.
Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
I have also read the documention of the function module. How to use this FM for custom defined condition table.
(this is the code given in Documentation)
DATA-OBJECT_REPRESENTATION         = 'E'
DATA-SEL_OPT-CT_APPLICATION              = 'CRM'
DATA-SEL_OPT-OBJECT_TASK                    = 'D'
DATA-SEL_OPT-RANGE-FIELDNAME        = 'PRODUCT_ID'
DATA-SEL_OPT-RANGE-R_SIGN                  = 'I'    (Including)
DATA-SEL_OPT-RANGE-R_OPTION           = 'EQ'
DATA-SEL_OPT-RANGE-R_VALUE_LOW = 'PROD_1'
Thanks
Shankar

Hi Shankar,
I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
Error in lt_return: SMW3     CND_MAST_SEL_DEL_EXT_VALIDATE     CND_M_SD
code:
ls_range-fieldname = 'PRODUCT_ID''.
ls_range-R_SIGN = 'I'.
ls_range-R_OPTION = 'EQ'.
ls_range-R_VALUE_LOW = '123456'.
APPEND ls_range TO lt_range.
MOVE lt_range TO ls_entry-SEL_OPT-range.
ls_data-SEL_OPT-object_task = 'D'.
ls_data-SEL_OPT-ct_application = 'CRM'.
ls_data-object_representation = 'E'.
CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
EXPORTING
    DATA          = ls_date
IMPORTING
   RETURN        = lt_return
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
IMPORTING
    return = lt_ret.
Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM

How to find all open POs and there SUM

How to find all open POs and there SUM
Please help.
Thanks,
vihar9

Have you tried looking at the tables, standard reports, or the PO display transaction? Have you asked your functional analyst or development team lead? This is not a forum to post a requirement and get your job done for you...

How to find all JMX ports on a server?

How to find all jmx ports on particular server (say localhost) on windows
I have multiple JVM's running on my local server, and there is extensive use of JXM mbeans by the applications running on each server. So I want to connect to all these JMX servers and to instrument the MBeans using Jconsole(Jconsole localhost:<port>). But I don't know the port numbers, and its not logged by the application.
How do I find all the ports jmx servers connected?
Note : In my case I can not instrument using the PID.
thanks,
bala K

Hi kajbj,
I tried stop/start the application, but couldn't find any difference in the netstat command. I know it should show the JMX port (I am able to see on a test application), but this application's JMX port usage is missing.
netstat -ano --> Do i need to use any other commands?
I just injected few lines of code ( to list the MBeanServers programatically), to this application (did some usual tweaks to let this code execute at some time) and its listing couple of MBeanServers and lot of MBeans.
MBeanServerFactory.findMBeanServer(null); and so on.....
Is there a way to get the port using the Management API's?
thanks,
bala K

How to find all the tables associated for a particular transaction

Hi-
May I know how to find all the tables, related(foreign key) tables for a transaction within SAP GUI?
Up to my technical knowledge, this can be achieved by looking database diagrams from DB level. But that would be for entire database as a whole. What I'm expecting is to see transaction level relative tables that too from SAP GUI. Please share the possibilities if any.
Regards
Sekhar

Dear Micky Oestreich
May be we possess expertise or high level experience, it should not show up in our way of communication. Every professional starts with the basic stuff to learn. When the question is raised in such minimum polite way, the same level of courtesy is expected in return. If you felt my question was basic, you might have refused it gently. If you are in good mood or bad mood it doesn't matters.
Hi Vengal Rao
Thanks for your response. It helped me.
Regards
Sekhar

How to find last inserted record in the table.

Version: Oracle 10g
I have a table called "Manufacture" and 3 columns as mfno,itemname,quantity.
How to find last inserted record in the table "Manufacture".
As i come to know that Rowid is not result perfect results. Please provide your inputs.

user13416294 wrote:
Version: Oracle 10gThat is not a version. That is a product name. A version is 10.1.0.2 or 10.2.0.4, etc.
I have a table called "Manufacture" and 3 columns as mfno,itemname,quantity.
How to find last inserted record in the table "Manufacture".Not possible as your data model does not cater for it. That simple.
If there is a need to determine some order or associate some time to an entity, then that should be part of the data model - and a relationship, or one or more attributes are needed to represent that information. Thus your data model in this case is unable to meet your requirements.
If the requirements are valid, fix the data model. In other words - your question has nothing to do with Oracle and nothing to do with rowid, rowscn or other pseudo columns in Oracle. It is a pure data modeling issue. Nothing more.

Hierarchical query - How to get all parent records - Duplicate post

Hi,
In Oracle, START WITH, CONNECT BY commands will give all the direct and indirect child records. Other way round, is they are command which gives all the parent records till the root? Please let me know. I am working on Oracle 9i Release 2.
Thanks a lot for your help.
Edited by: skv on Nov 21, 2008 11:05 AM

Duplicate post.
Hierarchical query - How to get all parent records
Please edit this post heading to duplicate post.
Regards.
Satyaki De.

How to find count of records based on batch wise.

Hi All,
We are working on OWB10gr2. I would like share one requirement. Any one can suggest me how to do it and which is the best way to get accurate information.
We have 2 schemas’ like nia_src and nia_tgt. currently we are moving data from nia_src to nia_tgt for that reason we implemented some mappings based on requirement. In my source schema (nia_src) having 100 tables with data and similar structure replicated in target schema (nia_tgt).
In source schema every table having one date field for which record is inserted and based on that field we can find how may records are inserted on particular table ,particular time.
Same like target also maintaining date fields for tracking purposes.
We have done some mappings and scheduled also. Every day we are into the target with incremental data. All are working fine not any issues.
I wanted to know how many records inserted, updated, merged for particular batch
How can we find?
Can we find exact information in OWB_REP_OWNER schema on WB_RT_AUDIT?.
For tracking purposes I need to find those values how many records are available in
Source table and how many records are populated to the target schema?
How to find schedule batch count of records table wise for batch wise?
Please suggest me any one on this.
thanks and regards,
venkat.

RE: based on pre operator can we find count of records. if yes how to do it.
No, you cannot tell from the pre- operator how many records will be inserted or updated into a mapping. How could you? The mapping hasn't run yet!
At best (if you have simple mappings with single targets) you could come up with a strategy to have the pre-mapping procedure aware of it's package name, then select from user_source for that package body until you find that first cursor used for the row-based processing, copy the cursor into a local variable, and then execute immediate select count(*) from that cursor definition. But still, all that would get you is the number of rows selected - not inserted / updated / errored etc.
A post-mapping procedure that is aware of the package name will, however, run prior to package exit so that the package spec is still in memory so you can access the public variables in the package spec. We do that in our standard post-mapping procedure
CREATE OR REPLACE procedure erscntrl_finalize_prc(
                       p_process_id     in number,
                       p_process_name   in varchar2)
as
      l_numread      number         := 0;
      l_numInserted number         := 0;
      l_numUpdated   number         := 0;
      l_numMerged    number         := 0;
      l_owb_audit_id number         := 0;
      l_owb_status   number         := 0;
      sqlStmt        varchar2(2000) :=
                           'begin '||
                           ' :1 := '||p_process_name||'.get_selected; '||
                           ' :2 := '||p_process_name||'.get_inserted; '||
                           ' :3 := '||p_process_name||'.get_updated; '||
                           ' :4 := '||p_process_name||'.get_merged; '||
                           ' :5 := '||p_process_name||'.get_audit_id; '||
                           ' :6 := '||p_process_name||'.get_status; '||
                           ' end;';
begin
      -- we use dynamic SQL to return required audit field values.
      -- This allows us to alter which values we need at a later date
      -- without impacting the deployed mappings.
    execute immediate sqlStmt
    using   out l_numread,   out l_numInserted, out l_numUpdated,
            out l_numMerged, out l_owb_audit_id, out l_owb_status;
-- then execute our own logging package.
   owb_mapping_log_pkg.finalize(
                       p_process_id,
                       p_process_name,
                       l_numread,
                       l_numInserted,
                       l_numUpdated,
                       l_numMerged,
                       l_owb_audit_id,
                       l_owb_status
end;
/However, even in this case bear in mind that if you run the mapping in set-base mode, all Oracle returns is the number merged which does not give values for the inserted and updated counts. If you really need those values you need to either a) run in row-based mode or row-based-target-only, or come up with some custom queries. For example, in your pre-mapping do a select count(*) from your_target_table, then run the mapping, then get the number merged, then do another select count(*) from your_target_table. With these values and basic math you could tell the number inserted by the growth in the table, and the rest of the number merged must have been updates.
That being said, if you are playing with dimensions as large as most of the ones I am - there is no bloody way that you want to do two select count(*) statements on each run without a really, really good reason.....
Cheers,
Mike

How to add new condition record to sales order items

Hello All,
I have requirement to add to new condition record to get more discount on the item during sales order processing based on some conditions. In user exit SAVE_DOCUMENT_PREPARE , I am populating an internal with items for which additional discounts are required. So want to add condition record to those items to get additional discount.
I know that in VOFM routines we can modify the existing condition record value but not sure what is the best place to append new condtion record to conditions table.
Thanks,
Suman

Hi suman,
As which conditions you want or whatever logic you want for to write for applying the conditions you need to make changes at two includes and one FM by using Implicit Enhancement
1) MV45AFZZ
2)RV61AFZB
3) FM name i am not remembering you can debug and find out.
Regards,
Shahezad

How to find the last records of the table in adventure work db

hi all,
i want to find out " how to receive a last records of the table (eg: person.emailaddress ) in sql 2008 and 2005"
Thanks

If you are looking for the latest record( the one which got inserted/modified last) then use this query
select top 1 * from person.emailaddress
Order by ModifiedDate desc
Satheesh
My Blog |
How to ask questions in technical forum

How to find all condition records

Similar Messages

Maybe you are looking for